From: "Henrik Rydberg" <rydberg@euromail.se>
To: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
iiro.valkonen@atmel.com, kyungmin.park@samsung.com
Subject: Re: [PATCH 4/4] Input: atmel_mxt_ts - Convert to MT protocol B
Date: Thu, 10 Mar 2011 12:10:40 +0100 [thread overview]
Message-ID: <20110310111040.GA2595@polaris.bitmath.org> (raw)
In-Reply-To: <1299488069-24291-1-git-send-email-jy0922.shim@samsung.com>
Hi Joonyoung,
> Atmel touchscreen chips can use MT protocol B because they can assign
> unique id to ABS_MT_TRACKING_ID from finger id provided by hardware.
>
> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Thanks for making this change. Please see comments inline.
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 37 ++++++++++++++++++++---------
> 1 files changed, 25 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index fd1fda5..7da71d9 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -203,6 +203,7 @@
>
> /* Touchscreen absolute values */
> #define MXT_MAX_AREA 0xff
> +#define MXT_MAX_TRACKING_ID 0xff
Instead, include <linux/input/mt.h>
> #define MXT_MAX_FINGER 10
>
> @@ -238,6 +239,7 @@ struct mxt_finger {
> int x;
> int y;
> int area;
> + int trkid;
The tracking id is now handled in the input core, so it can be dropped here.
> };
>
> /* Each client has this additional data */
> @@ -504,19 +506,19 @@ static void mxt_input_report(struct mxt_data *data, int single_id)
> if (!finger[id].status)
> continue;
>
> - input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
> - finger[id].status != MXT_RELEASE ?
> - finger[id].area : 0);
> - input_report_abs(input_dev, ABS_MT_POSITION_X,
> - finger[id].x);
> - input_report_abs(input_dev, ABS_MT_POSITION_Y,
> - finger[id].y);
> - input_mt_sync(input_dev);
> -
> - if (finger[id].status == MXT_RELEASE)
> - finger[id].status = 0;
> - else
> + input_mt_slot(input_dev, id);
> + input_report_abs(input_dev, ABS_MT_TRACKING_ID,
> + finger[id].trkid);
Replace the line above with (possibly using a temp variable instead)
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, finger[id].status != MXT_RELEASE);
> + if (finger[id].status != MXT_RELEASE) {
> finger_num++;
> + input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
> + finger[id].area);
> + input_report_abs(input_dev, ABS_MT_POSITION_X,
> + finger[id].x);
> + input_report_abs(input_dev, ABS_MT_POSITION_Y,
> + finger[id].y);
> + } else
> + finger[id].status = 0;
> }
>
> input_report_key(input_dev, BTN_TOUCH, finger_num > 0);
> @@ -538,6 +540,7 @@ static void mxt_input_touchevent(struct mxt_data *data,
> int x;
> int y;
> int area;
> + static int trkid;
drop
>
> /* Check the touch is present on the screen */
> if (!(status & MXT_DETECT)) {
> @@ -545,6 +548,7 @@ static void mxt_input_touchevent(struct mxt_data *data,
> dev_dbg(dev, "[%d] released\n", id);
>
> finger[id].status = MXT_RELEASE;
> + finger[id].trkid = -1;
drop
> mxt_input_report(data, id);
> }
> return;
> @@ -572,6 +576,8 @@ static void mxt_input_touchevent(struct mxt_data *data,
> finger[id].x = x;
> finger[id].y = y;
> finger[id].area = area;
> + if (finger[id].trkid < 0)
> + finger[id].trkid = trkid++ & MXT_MAX_TRACKING_ID;
drop
>
> mxt_input_report(data, id);
> }
> @@ -790,8 +796,12 @@ static int mxt_initialize(struct mxt_data *data)
> struct i2c_client *client = data->client;
> struct mxt_info *info = &data->info;
> int error;
> + int i;
drop
> u8 val;
>
> + for (i = 0; i < MXT_MAX_FINGER; i++)
> + data->finger[i].trkid = -1;
> +
drop
> error = mxt_get_info(data);
> if (error)
> return error;
> @@ -1091,6 +1101,9 @@ static int __devinit mxt_probe(struct i2c_client *client,
> 0, data->y_size, 0, 0);
>
> /* For multi touch */
> + input_mt_create_slots(input_dev, MXT_MAX_FINGER);
> + input_set_abs_params(input_dev, ABS_MT_TRACKING_ID,
> + 0, MXT_MAX_TRACKING_ID, 0, 0);
Replace with
input_mt_init_slots(input_dev, MXT_MAX_FINGER);
> input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
> 0, MXT_MAX_AREA, 0, 0);
> input_set_abs_params(input_dev, ABS_MT_POSITION_X,
> --
> 1.7.0.4
Thanks,
Henrik
next prev parent reply other threads:[~2011-03-10 11:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-07 8:54 [PATCH 4/4] Input: atmel_mxt_ts - Convert to MT protocol B Joonyoung Shim
2011-03-10 11:10 ` Henrik Rydberg [this message]
2011-03-11 6:41 ` Joonyoung Shim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110310111040.GA2595@polaris.bitmath.org \
--to=rydberg@euromail.se \
--cc=dmitry.torokhov@gmail.com \
--cc=iiro.valkonen@atmel.com \
--cc=jy0922.shim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).