* [PATCH v2 1/1] input: add driver for Bosch Sensortec's BMA150 accelerometer
2011-06-23 14:40 [PATCH v2 0/1] input: add driver for Bosch Sensortec's BMA150 accelerometer Eric Andersson
@ 2011-06-23 14:40 ` Eric Andersson
2011-06-23 15:36 ` Alan Cox
0 siblings, 1 reply; 5+ messages in thread
From: Eric Andersson @ 2011-06-23 14:40 UTC (permalink / raw)
To: dmitry.torokhov
Cc: linux-input, linux-kernel, zhengguang.guo, stefan.nilsson, alan,
Eric Andersson, Albert Zhang
Signed-off-by: Albert Zhang <xu.zhang@bosch-sensortec.com>
Signed-off-by: Eric Andersson <eric.andersson@unixphere.com>
---
Documentation/ABI/testing/sysfs-i2c-bma150 | 71 +++
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/bma150.c | 684 ++++++++++++++++++++++++++++
4 files changed, 766 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-i2c-bma150
create mode 100644 drivers/input/misc/bma150.c
diff --git a/Documentation/ABI/testing/sysfs-i2c-bma150 b/Documentation/ABI/testing/sysfs-i2c-bma150
new file mode 100644
index 0000000..16ed552
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-i2c-bma150
@@ -0,0 +1,71 @@
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/range
+Date: May 2011
+Contact: Eric Andersson <eric.andersson@unixphere.com>
+Description: This is used to select the full scale acceleration range. The
+ values represent the range given as +/- G.
+ Possible values are: 2, 4, 8.
+
+ Reading: returns the current acceleration range.
+
+ Writing: sets a new acceleration range.
+
+
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/bandwidth
+Date: May 2011
+Contact: Eric Andersson <eric.andersson@unixphere.com>
+Description: This is used to setup the digital filtering on ADC output data.
+ The values represent the bandwidth given in Hz.
+ Possible values are: 25, 50, 100, 190, 375, 750, 1500
+
+ Reading: returns the current bandwidth.
+
+ Writing: sets a new bandwidth.
+
+
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/mode
+Date: May 2011
+Contact: Eric Andersson <eric.andersson@unixphere.com>
+Description: This is used to set the operational mode of the chip. Possible
+ values are:
+ normal - Sets the sensor in full running mode.
+ sleep - Sets the sensor in deep sleep.
+ wakeup - Sets the sensor to low-power mode using
+ sequential sleep period.
+
+ Reading: returns the current operational mode.
+
+ Writing: sets a new operational mode.
+
+
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/value
+Date: May 2011
+Contact: Eric Andersson <eric.andersson@unixphere.com>
+Description: This is used to get the current acceleration values for each
+ axis. The values are represented as (x,y,z), where each axis can
+ hold a value between -512 and 511.
+
+ Reading: returns the current acceleration values.
+
+
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/delay
+Date: May 2011
+Contact: Eric Andersson <eric.andersson@unixphere.com>
+Description: This is used to select the polling rate of the driver. The
+ value is represented in ms and can be between 0 and 200. Any
+ value higher than the maximum will result in the maximum.
+
+ Reading: returns the current poll rate.
+
+ Writing: sets a new poll rate.
+
+
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/enable
+Date: May 2011
+Contact: Eric Andersson <eric.andersson@unixphere.com>
+Description: This is used to enable and disable the chip. The chip will only
+ be disabled if there are no input device users.
+
+ Reading: returns 1 if chip is enabled and 0 if not.
+
+ Writing: write 1 to enable and 0 to disable the chip.
+
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 45dc6aa..9da47fd 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -478,4 +478,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
To compile this driver as a module, choose M here: the
module will be called xen-kbdfront.
+config INPUT_BMA150
+ tristate "BMA150 acceleration sensor support"
+ depends on I2C
+ help
+ Say Y here if you have Bosch Sensortec's BMA150 acceleration
+ sensor hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bma150.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 38efb2c..9b13e0e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -45,4 +45,5 @@ obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
+obj-$(CONFIG_INPUT_BMA150) += bma150.o
diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
new file mode 100644
index 0000000..596861b
--- /dev/null
+++ b/drivers/input/misc/bma150.c
@@ -0,0 +1,684 @@
+/*
+ * Copyright (c) 2011 Bosch Sensortec GmbH
+ * Copyright (c) 2011 Unixphere
+ *
+ * This driver adds support for Bosch Sensortec's digital acceleration
+ * sensors BMA150 and SMB380.
+ * The SMB380 is fully compatible with BMA150 and only differs in packaging.
+ *
+ * The datasheet for the BMA150 chip can be found here:
+ * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMA150-DS000-07.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+
+#define SENSOR_NAME "bma150"
+#define ABSMAX_ACC_VAL 0x01FF
+#define ABSMIN_ACC_VAL -(ABSMAX_ACC_VAL)
+#define BMA150_MAX_DELAY 200
+
+#define BMA150_BW_25HZ 0
+#define BMA150_BW_50HZ 1
+#define BMA150_BW_100HZ 2
+#define BMA150_BW_190HZ 3
+#define BMA150_BW_375HZ 4
+#define BMA150_BW_750HZ 5
+#define BMA150_BW_1500HZ 6
+
+#define BMA150_RANGE_2G 0
+#define BMA150_RANGE_4G 1
+#define BMA150_RANGE_8G 2
+
+#define BMA150_MODE_NORMAL 0
+#define BMA150_MODE_SLEEP 2
+#define BMA150_MODE_WAKE_UP 3
+
+#define BMA150_CHIP_ID 2
+#define BMA150_CHIP_ID_REG 0x00
+
+#define BMA150_ACC_X_LSB_REG 0x02
+
+#define BMA150_SLEEP_POS 0
+#define BMA150_SLEEP_MSK 0x01
+#define BMA150_SLEEP_REG 0x0a
+
+#define BMA150_BANDWIDTH_POS 0
+#define BMA150_BANDWIDTH_MSK 0x07
+#define BMA150_BANDWIDTH_REG 0x14
+
+#define BMA150_RANGE_POS 3
+#define BMA150_RANGE_MSK 0x18
+#define BMA150_RANGE_REG 0x14
+
+#define BMA150_WAKE_UP_POS 0
+#define BMA150_WAKE_UP_MSK 0x01
+#define BMA150_WAKE_UP_REG 0x15
+
+struct bma150_data {
+ struct i2c_client *bma150_client;
+ unsigned int delay;
+ unsigned int sysfs_enable;
+ unsigned char mode;
+ struct input_dev *input;
+ struct mutex mutex;
+ struct delayed_work work;
+
+ s16 x, y, z;
+};
+
+static const struct {
+ int value;
+ int reg;
+} bw_val[] = {
+ { 25, BMA150_BW_25HZ },
+ { 50, BMA150_BW_50HZ },
+ { 100, BMA150_BW_100HZ },
+ { 190, BMA150_BW_190HZ },
+ { 375, BMA150_BW_375HZ },
+ { 750, BMA150_BW_750HZ },
+ { 1500, BMA150_BW_1500HZ },
+};
+
+static const struct {
+ int value;
+ int reg;
+} range_val[] = {
+ { 2, BMA150_RANGE_2G },
+ { 4, BMA150_RANGE_4G },
+ { 8, BMA150_RANGE_8G }
+};
+
+static const struct {
+ char *value;
+ int reg;
+} mode_val[] = {
+ { "normal", BMA150_MODE_NORMAL },
+ { "sleep", BMA150_MODE_SLEEP },
+ { "wakeup", BMA150_MODE_WAKE_UP }
+};
+
+static int bma150_start_polling(struct input_dev *inputdev);
+static void bma150_stop_polling(struct input_dev *inputdev);
+
+static int bma150_set_mode(struct i2c_client *client, unsigned char mode)
+{
+ s32 ret;
+ unsigned char data1, data2;
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ mutex_lock(&bma150->mutex);
+ ret = i2c_smbus_read_byte_data(client, BMA150_WAKE_UP_REG);
+ if (ret < 0)
+ goto error;
+
+ data1 = (ret & ~BMA150_WAKE_UP_MSK) |
+ ((mode << BMA150_WAKE_UP_POS) & BMA150_WAKE_UP_MSK);
+
+ ret = i2c_smbus_read_byte_data(client, BMA150_SLEEP_REG);
+ if (ret < 0)
+ goto error;
+
+ data2 = (ret & ~BMA150_SLEEP_MSK) |
+ (((mode>>1) << BMA150_SLEEP_POS) & BMA150_SLEEP_MSK);
+
+ ret = i2c_smbus_write_byte_data(client, BMA150_WAKE_UP_REG, data1);
+ if (ret < 0)
+ goto error;
+
+ ret = i2c_smbus_write_byte_data(client, BMA150_SLEEP_REG, data2);
+ if (ret < 0)
+ goto error;
+
+ bma150->mode = (unsigned char) mode;
+error:
+ mutex_unlock(&bma150->mutex);
+ return ret;
+}
+
+static int bma150_set_range(struct i2c_client *client, unsigned char range)
+{
+ s32 ret;
+ unsigned char data;
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ mutex_lock(&bma150->mutex);
+ ret = i2c_smbus_read_byte_data(client, BMA150_RANGE_REG);
+ if (ret < 0)
+ goto error;
+
+ data = (ret & ~BMA150_RANGE_MSK) |
+ ((range << BMA150_RANGE_POS) & BMA150_RANGE_MSK);
+
+ ret = i2c_smbus_write_byte_data(client, BMA150_RANGE_REG, data);
+error:
+ mutex_unlock(&bma150->mutex);
+ return ret;
+}
+
+static int bma150_get_range(struct i2c_client *client)
+{
+ s32 ret;
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ mutex_lock(&bma150->mutex);
+ ret = i2c_smbus_read_byte_data(client, BMA150_RANGE_REG);
+ if (ret < 0)
+ goto error;
+
+ ret = (ret & BMA150_RANGE_MSK) >> BMA150_RANGE_POS;
+error:
+ mutex_unlock(&bma150->mutex);
+ return ret;
+}
+
+static int bma150_set_bandwidth(struct i2c_client *client, unsigned char bw)
+{
+ s32 ret;
+ unsigned char data;
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ mutex_lock(&bma150->mutex);
+ ret = i2c_smbus_read_byte_data(client, BMA150_BANDWIDTH_REG);
+ if (ret < 0)
+ goto error;
+
+ data = (ret & ~BMA150_BANDWIDTH_MSK) |
+ ((bw << BMA150_BANDWIDTH_POS) & BMA150_BANDWIDTH_MSK);
+
+ ret = i2c_smbus_write_byte_data(client, BMA150_BANDWIDTH_REG, data);
+error:
+ mutex_unlock(&bma150->mutex);
+ return ret;
+}
+
+static int bma150_get_bandwidth(struct i2c_client *client)
+{
+ s32 ret;
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ mutex_lock(&bma150->mutex);
+ ret = i2c_smbus_read_byte_data(client, BMA150_BANDWIDTH_REG);
+ if (ret < 0)
+ goto error;
+
+ ret = (ret & BMA150_BANDWIDTH_MSK) >> BMA150_BANDWIDTH_POS;
+error:
+ mutex_unlock(&bma150->mutex);
+ return ret;
+}
+
+static void bma150_work_func(struct work_struct *work)
+{
+ unsigned char data[6];
+ s16 x, y, z;
+ s32 ret;
+ struct bma150_data *bma150 = container_of((struct delayed_work *)work,
+ struct bma150_data, work);
+ unsigned long delay = msecs_to_jiffies(bma150->delay);
+
+ ret = i2c_smbus_read_i2c_block_data(bma150->bma150_client,
+ BMA150_ACC_X_LSB_REG, 6, data);
+ if (ret != 6)
+ return;
+
+ x = ((0xc0 & data[0]) >> 6) | (data[1] << 2);
+ y = ((0xc0 & data[2]) >> 6) | (data[3] << 2);
+ z = ((0xc0 & data[4]) >> 6) | (data[5] << 2);
+
+ /* sign extension */
+ x = (s16) (x << 6) >> 6;
+ y = (s16) (y << 6) >> 6;
+ z = (s16) (z << 6) >> 6;
+
+ input_report_abs(bma150->input, ABS_X, x);
+ input_report_abs(bma150->input, ABS_Y, y);
+ input_report_abs(bma150->input, ABS_Z, z);
+ input_sync(bma150->input);
+
+ mutex_lock(&bma150->mutex);
+ bma150->x = x;
+ bma150->y = y;
+ bma150->z = z;
+ mutex_unlock(&bma150->mutex);
+
+ schedule_delayed_work(&bma150->work, delay);
+}
+
+static ssize_t bma150_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int len;
+ int i;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ for (i = 0, len = 0; i < ARRAY_SIZE(mode_val); i++)
+ len += sprintf(buf + len,
+ (bma150->mode == mode_val[i].reg) ? "[%s] " : "%s ",
+ mode_val[i].value);
+
+ len += sprintf(buf + len, "\n");
+ return len;
+}
+
+static ssize_t bma150_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int i;
+ int ret;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ for (i = 0; i < ARRAY_SIZE(mode_val); i++)
+ if (strncmp(mode_val[i].value, buf,
+ strlen(mode_val[i].value)) == 0) {
+ ret = bma150_set_mode(bma150->bma150_client,
+ mode_val[i].reg);
+ if (ret < 0)
+ return ret;
+ return count;
+ }
+
+ return -EINVAL;
+}
+static ssize_t bma150_range_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ int i;
+ int range;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ range = bma150_get_range(bma150->bma150_client);
+ if (range < 0)
+ return sprintf(buf, "Read error\n");
+
+ for (i = 0, ret = 0; i < ARRAY_SIZE(range_val); i++)
+ ret += sprintf(buf + ret,
+ (range_val[i].reg == range) ? "[%d] " : "%d ",
+ range_val[i].value);
+
+ ret += sprintf(buf + ret, "\n");
+ return ret;
+}
+
+static ssize_t bma150_range_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long data;
+ int error;
+ int i;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ error = strict_strtoul(buf, 10, &data);
+ if (error)
+ return error;
+
+ for (i = 0; i < ARRAY_SIZE(range_val); i++)
+ if (range_val[i].value == data) {
+ error = bma150_set_range(bma150->bma150_client,
+ range_val[i].reg);
+ if (error < 0)
+ return error;
+ return count;
+ }
+
+ return -EINVAL;
+}
+
+static ssize_t bma150_bandwidth_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ int i;
+ int bw;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ bw = bma150_get_bandwidth(bma150->bma150_client);
+ if (bw < 0)
+ return sprintf(buf, "Read error\n");
+
+ for (i = 0, ret = 0; i < ARRAY_SIZE(bw_val); i++)
+ ret += sprintf(buf + ret,
+ (bw_val[i].reg == bw) ? "[%d] " : "%d ",
+ bw_val[i].value);
+
+ ret += sprintf(buf + ret, "\n");
+ return ret;
+}
+
+static ssize_t bma150_bandwidth_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long data;
+ int error;
+ int i;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ error = strict_strtoul(buf, 10, &data);
+ if (error)
+ return error;
+
+ for (i = 0; i < ARRAY_SIZE(bw_val); i++)
+ if (bw_val[i].value == data) {
+ error = bma150_set_bandwidth(bma150->bma150_client,
+ bw_val[i].reg);
+ if (error < 0)
+ return error;
+ return count;
+ }
+
+ return -EINVAL;
+}
+
+static ssize_t bma150_value_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct input_dev *input = to_input_dev(dev);
+ struct bma150_data *bma150 = input_get_drvdata(input);
+
+ return sprintf(buf, "(%d,%d,%d)\n", bma150->x, bma150->y,
+ bma150->z);
+}
+
+static ssize_t bma150_delay_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n", bma150->delay);
+
+}
+
+static ssize_t bma150_delay_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long data;
+ int error;
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ error = strict_strtoul(buf, 10, &data);
+ if (error)
+ return error;
+
+ if (data > BMA150_MAX_DELAY)
+ data = BMA150_MAX_DELAY;
+
+ mutex_lock(&bma150->mutex);
+ bma150->delay = data;
+ mutex_unlock(&bma150->mutex);
+
+ return count;
+}
+
+static ssize_t bma150_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct input_dev *input = to_input_dev(dev);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ return sprintf(buf, "%d\n",
+ !!(bma150->sysfs_enable || input->users));
+}
+
+static ssize_t bma150_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long data;
+ int error;
+ struct input_dev *input = to_input_dev(dev);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bma150_data *bma150 = i2c_get_clientdata(client);
+
+ error = strict_strtoul(buf, 10, &data);
+ if (error)
+ return error;
+
+ if (input->users)
+ goto exit;
+
+ if (data)
+ bma150_start_polling(input);
+ else
+ bma150_stop_polling(input);
+
+exit:
+ mutex_lock(&bma150->mutex);
+ bma150->sysfs_enable = !!data;
+ mutex_unlock(&bma150->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(range, S_IRUGO|S_IWUSR|S_IWGRP,
+ bma150_range_show, bma150_range_store);
+static DEVICE_ATTR(bandwidth, S_IRUGO|S_IWUSR|S_IWGRP,
+ bma150_bandwidth_show, bma150_bandwidth_store);
+static DEVICE_ATTR(mode, S_IRUGO|S_IWUSR|S_IWGRP,
+ bma150_mode_show, bma150_mode_store);
+static DEVICE_ATTR(value, S_IRUGO, bma150_value_show, NULL);
+static DEVICE_ATTR(delay, S_IRUGO|S_IWUSR|S_IWGRP,
+ bma150_delay_show, bma150_delay_store);
+static DEVICE_ATTR(enable, S_IRUGO|S_IWUSR|S_IWGRP,
+ bma150_enable_show, bma150_enable_store);
+
+static struct attribute *bma150_attributes[] = {
+ &dev_attr_range.attr,
+ &dev_attr_bandwidth.attr,
+ &dev_attr_mode.attr,
+ &dev_attr_value.attr,
+ &dev_attr_delay.attr,
+ &dev_attr_enable.attr,
+ NULL
+};
+
+static struct attribute_group bma150_attribute_group = {
+ .attrs = bma150_attributes
+};
+
+static int bma150_start_polling(struct input_dev *inputdev)
+{
+ struct bma150_data *dev = input_get_drvdata(inputdev);
+ int ret = bma150_set_mode(dev->bma150_client, BMA150_MODE_NORMAL);
+ if (ret < 0)
+ return ret;
+
+ schedule_delayed_work(&dev->work, msecs_to_jiffies(dev->delay));
+ return 0;
+}
+
+static void bma150_stop_polling(struct input_dev *inputdev)
+{
+ struct bma150_data *dev = input_get_drvdata(inputdev);
+ cancel_delayed_work_sync(&dev->work);
+ bma150_set_mode(dev->bma150_client, BMA150_MODE_SLEEP);
+}
+
+static int bma150_open(struct input_dev *inputdev)
+{
+ struct bma150_data *dev = input_get_drvdata(inputdev);
+
+ if (!dev->sysfs_enable)
+ return bma150_start_polling(inputdev);
+
+ return 0;
+}
+
+static void bma150_close(struct input_dev *inputdev)
+{
+ struct bma150_data *dev = input_get_drvdata(inputdev);
+
+ if (!dev->sysfs_enable)
+ bma150_stop_polling(inputdev);
+}
+
+static int __devinit bma150_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bma150_data *data;
+ struct input_dev *dev;
+ int tempvalue;
+ int err = 0;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c_check_functionality error\n");
+ return -EIO;
+ }
+
+ data = kzalloc(sizeof(struct bma150_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ tempvalue = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG);
+ if (tempvalue != BMA150_CHIP_ID) {
+ dev_err(&client->dev, "BMA150 chip id error: %d\n", tempvalue);
+ err = -EINVAL;
+ goto kfree_exit;
+ }
+ i2c_set_clientdata(client, data);
+ data->bma150_client = client;
+ mutex_init(&data->mutex);
+
+ bma150_set_bandwidth(client, BMA150_BW_50HZ);
+ bma150_set_range(client, BMA150_RANGE_2G);
+
+ INIT_DELAYED_WORK(&data->work, bma150_work_func);
+ data->delay = BMA150_MAX_DELAY;
+
+ dev = input_allocate_device();
+ if (!dev) {
+ err = -ENOMEM;
+ goto kfree_exit;
+ }
+
+ dev->name = SENSOR_NAME;
+ dev->id.bustype = BUS_I2C;
+ dev->open = bma150_open;
+ dev->close = bma150_close;
+
+ input_set_capability(dev, EV_ABS, ABS_MISC);
+ input_set_abs_params(dev, ABS_X, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
+ input_set_abs_params(dev, ABS_Y, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
+ input_set_abs_params(dev, ABS_Z, ABSMIN_ACC_VAL, ABSMAX_ACC_VAL, 0, 0);
+ input_set_drvdata(dev, data);
+
+ err = input_register_device(dev);
+ if (err < 0) {
+ input_free_device(dev);
+ goto kfree_exit;
+ }
+
+ data->input = dev;
+
+ err = sysfs_create_group(&data->input->dev.kobj,
+ &bma150_attribute_group);
+ if (err < 0)
+ goto error_sysfs;
+
+ dev_info(&client->dev, "Registered BMA150 I2C driver\n");
+ return 0;
+
+error_sysfs:
+ input_unregister_device(dev);
+kfree_exit:
+ kfree(data);
+ return err;
+}
+
+#ifdef CONFIG_PM
+static int bma150_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ return bma150_set_mode(client, BMA150_MODE_SLEEP);
+}
+
+static int bma150_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ return bma150_set_mode(client, BMA150_MODE_NORMAL);
+}
+#endif
+
+static int bma150_remove(struct i2c_client *client)
+{
+ struct bma150_data *data = i2c_get_clientdata(client);
+
+ sysfs_remove_group(&data->input->dev.kobj, &bma150_attribute_group);
+ input_unregister_device(data->input);
+ kfree(data);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(bma150_pm, bma150_suspend,
+ bma150_resume);
+
+static const struct i2c_device_id bma150_id[] = {
+ { SENSOR_NAME, 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, bma150_id);
+
+static struct i2c_driver bma150_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = SENSOR_NAME,
+ .pm = &bma150_pm,
+ },
+ .class = I2C_CLASS_HWMON,
+ .id_table = bma150_id,
+ .probe = bma150_probe,
+ .remove = __devexit_p(bma150_remove),
+};
+
+static int __init BMA150_init(void)
+{
+ return i2c_add_driver(&bma150_driver);
+}
+
+static void __exit BMA150_exit(void)
+{
+ i2c_del_driver(&bma150_driver);
+}
+
+MODULE_AUTHOR("Albert Zhang <xu.zhang@bosch-sensortec.com>");
+MODULE_DESCRIPTION("BMA150 driver");
+MODULE_LICENSE("GPL");
+
+module_init(BMA150_init);
+module_exit(BMA150_exit);
+
--
1.7.3.4
^ permalink raw reply related [flat|nested] 5+ messages in thread