From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Linux Input <linux-input@vger.kernel.org>
Subject: [PATCH] Input: synaptics - set minimum coordinates as reported by firmware
Date: Wed, 6 Jul 2011 23:57:05 -0700 [thread overview]
Message-ID: <20110707065705.GH7658@core.coreip.homeip.net> (raw)
Newer Synaptics firmware allows to query minimum coordinates reported by
the device, let's use this data.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/synaptics.c | 56 ++++++++++++++++++++++++++-------------
drivers/input/mouse/synaptics.h | 8 ++++--
2 files changed, 43 insertions(+), 21 deletions(-)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 86bd89a..5538fc6 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -207,27 +207,37 @@ static int synaptics_identify(struct psmouse *psmouse)
static int synaptics_resolution(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
- unsigned char res[3];
- unsigned char max[3];
+ unsigned char resp[3];
if (SYN_ID_MAJOR(priv->identity) < 4)
return 0;
- if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, res) == 0) {
- if (res[0] != 0 && (res[1] & 0x80) && res[2] != 0) {
- priv->x_res = res[0]; /* x resolution in units/mm */
- priv->y_res = res[2]; /* y resolution in units/mm */
+ if (synaptics_send_cmd(psmouse, SYN_QUE_RESOLUTION, resp) == 0) {
+ if (resp[0] != 0 && (resp[1] & 0x80) && resp[2] != 0) {
+ priv->x_res = resp[0]; /* x resolution in units/mm */
+ priv->y_res = resp[2]; /* y resolution in units/mm */
}
}
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 &&
SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) {
- if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_DIMENSIONS, max)) {
- printk(KERN_ERR "Synaptics claims to have dimensions query,"
- " but I'm not able to read it.\n");
+ if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) {
+ printk(KERN_ERR "Synaptics claims to have max coordinates"
+ " query, but I'm not able to read it.\n");
+ } else {
+ priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
+ priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
+ }
+ }
+
+ if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 &&
+ SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) {
+ if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) {
+ printk(KERN_ERR "Synaptics claims to have min coordinates"
+ " query, but I'm not able to read it.\n");
} else {
- priv->x_max = (max[0] << 5) | ((max[1] & 0x0f) << 1);
- priv->y_max = (max[2] << 5) | ((max[1] & 0xf0) >> 3);
+ priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1);
+ priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3);
}
}
@@ -693,19 +703,27 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
__set_bit(INPUT_PROP_POINTER, dev->propbit);
__set_bit(EV_ABS, dev->evbit);
- input_set_abs_params(dev, ABS_X, XMIN_NOMINAL,
- priv->x_max ?: XMAX_NOMINAL, fuzz, 0);
- input_set_abs_params(dev, ABS_Y, YMIN_NOMINAL,
- priv->y_max ?: YMAX_NOMINAL, fuzz, 0);
+ input_set_abs_params(dev, ABS_X,
+ priv->x_min ?: XMIN_NOMINAL,
+ priv->x_max ?: XMAX_NOMINAL,
+ fuzz, 0);
+ input_set_abs_params(dev, ABS_Y,
+ priv->y_min ?: YMIN_NOMINAL,
+ priv->y_max ?: YMAX_NOMINAL,
+ fuzz, 0);
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
input_mt_init_slots(dev, 2);
- input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL,
- priv->x_max ?: XMAX_NOMINAL, fuzz, 0);
- input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL,
- priv->y_max ?: YMAX_NOMINAL, fuzz, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_X,
+ priv->x_min ?: XMIN_NOMINAL,
+ priv->x_max ?: XMAX_NOMINAL,
+ fuzz, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y,
+ priv->y_min ?: YMIN_NOMINAL,
+ priv->y_max ?: YMAX_NOMINAL,
+ fuzz, 0);
input_abs_set_res(dev, ABS_MT_POSITION_X, priv->x_res);
input_abs_set_res(dev, ABS_MT_POSITION_Y, priv->y_res);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index b8025b0..a4394e1 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -19,7 +19,8 @@
#define SYN_QUE_RESOLUTION 0x08
#define SYN_QUE_EXT_CAPAB 0x09
#define SYN_QUE_EXT_CAPAB_0C 0x0c
-#define SYN_QUE_EXT_DIMENSIONS 0x0d
+#define SYN_QUE_EXT_MAX_COORDS 0x0d
+#define SYN_QUE_EXT_MIN_COORDS 0x0f
/* synatics modes */
#define SYN_BIT_ABSOLUTE_MODE (1 << 7)
@@ -73,10 +74,12 @@
* 2 0x04 reduced filtering firmware does less filtering on
* position data, driver should watch
* for noise.
+ * 2 0x20 report min query 0x0f gives min coord reported
*/
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
+#define SYN_CAP_MIN_DIMENSIONS(ex0c) ((ex0c) & 0x000200)
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
@@ -134,7 +137,8 @@ struct synaptics_data {
unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */
unsigned long int identity; /* Identification */
unsigned int x_res, y_res; /* X/Y resolution in units/mm */
- unsigned int x_max, y_max; /* Max dimensions (from FW) */
+ unsigned int x_max, y_max; /* Max coordinates (from FW) */
+ unsigned int x_min, y_min; /* Min coordinates (from FW) */
unsigned char pkt_type; /* packet type - old, new, etc */
unsigned char mode; /* current mode byte */
--
Dmitry
next reply other threads:[~2011-07-07 6:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-07 6:57 Dmitry Torokhov [this message]
2011-07-08 16:05 ` [PATCH] Input: synaptics - set minimum coordinates as reported by firmware Chase Douglas
2011-07-08 17:34 ` Henrik Rydberg
2011-07-20 11:20 ` Daniel Kurtz
2011-07-25 8:37 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110707065705.GH7658@core.coreip.homeip.net \
--to=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).