linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Barry Song <21cnbao@gmail.com>
Cc: dmitry.torokhov@gmail.com, Liam Girdwood <lrg@ti.com>,
	Grant Likely <grant.likely@secretlab.ca>,
	alsa-devel@alsa-project.org, devicetree-discuss@lists.ozlabs.org,
	linux-input@vger.kernel.org
Subject: Re: [alsa-devel] [PATCH] ASoC: Add device tree binding for WM8753
Date: Mon, 8 Aug 2011 17:55:03 +0900	[thread overview]
Message-ID: <20110808085459.GA12376@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <CAGsJ_4y2tDb3ZBPo8bCtrjFt0OWzR8WeG+kL_RKJPRP7-pZopw@mail.gmail.com>

On Mon, Aug 08, 2011 at 04:38:41PM +0800, Barry Song wrote:
> 2011/8/8 Mark Brown <broonie@opensource.wolfsonmicro.com>:
> > Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

> Without this patch, DT can still connect driver with device by the
> heuristic way(of_modalias_node).

Well, the other part of things is that it explicitly defines the
bindings (including qualification for the manufacturer, for Wolfson I
know we've got an occasional collision with chips from Wondermedia who
also use wm as a prefix for their part numbers).  The match tables
aren't particularly exciting in themselves but they're also very low
cost.

> 
> i have a patch just like yours in input subsystem "[PATCH v2] input:
> touchscreen: add OF match table for ads7846" with "Acked-by: Grant
> Likely", but Dmitry seems to just ignore it.
> 
> so not sure whether this kind of new added match tables are totally
> liked by people or not.
> 
> > ---
> >  Documentation/devicetree/bindings/sound/wm8753.txt |   18 ++++++++++++++++++
> >  sound/soc/codecs/wm8753.c                          |    9 +++++++++
> >  2 files changed, 27 insertions(+), 0 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/sound/wm8753.txt
> >
> > diff --git a/Documentation/devicetree/bindings/sound/wm8753.txt b/Documentation/devicetree/bindings/sound/wm8753.txt
> > new file mode 100644
> > index 0000000..e65277a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/wm8753.txt
> > @@ -0,0 +1,18 @@
> > +WM8753 audio CODEC
> > +
> > +This device supports both I2C and SPI (configured with pin strapping
> > +on the board).
> > +
> > +Required properties:
> > +
> > +  - compatible : "wlf,wm8753"
> > +
> > +  - reg : the I2C address of the device for I2C, the chip select
> > +          number for SPI.
> > +
> > +Example:
> > +
> > +codec: wm8737@1a {
> > +       compatible = "wlf,wm8753";
> > +       reg = <0x1a>;
> > +};
> > diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
> > index a702550..fe04a10 100644
> > --- a/sound/soc/codecs/wm8753.c
> > +++ b/sound/soc/codecs/wm8753.c
> > @@ -38,6 +38,7 @@
> >  #include <linux/delay.h>
> >  #include <linux/pm.h>
> >  #include <linux/i2c.h>
> > +#include <linux/of_device.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/spi/spi.h>
> >  #include <linux/slab.h>
> > @@ -1490,6 +1491,12 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8753 = {
> >        .reg_cache_default = wm8753_reg,
> >  };
> >
> > +static const struct of_device_id wm8753_of_match[] = {
> > +       { .compatible = "wlf,wm8753", },
> > +       { }
> > +};
> > +MODULE_DEVICE_TABLE(of, wm8753_of_match);
> > +
> >  #if defined(CONFIG_SPI_MASTER)
> >  static int __devinit wm8753_spi_probe(struct spi_device *spi)
> >  {
> > @@ -1521,6 +1528,7 @@ static struct spi_driver wm8753_spi_driver = {
> >        .driver = {
> >                .name   = "wm8753",
> >                .owner  = THIS_MODULE,
> > +               .of_match_table = wm8753_of_match,
> >        },
> >        .probe          = wm8753_spi_probe,
> >        .remove         = __devexit_p(wm8753_spi_remove),
> > @@ -1565,6 +1573,7 @@ static struct i2c_driver wm8753_i2c_driver = {
> >        .driver = {
> >                .name = "wm8753",
> >                .owner = THIS_MODULE,
> > +               .of_match_table = wm8753_of_match,
> >        },
> >        .probe =    wm8753_i2c_probe,
> >        .remove =   __devexit_p(wm8753_i2c_remove),
> > --
> > 1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2011-08-08  8:55 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1312778255-29755-1-git-send-email-broonie@opensource.wolfsonmicro.com>
2011-08-08  8:38 ` [alsa-devel] [PATCH] ASoC: Add device tree binding for WM8753 Barry Song
2011-08-08  8:55   ` Mark Brown [this message]
2011-08-09  6:51   ` Dmitry Torokhov
2011-08-09 14:28     ` Mark Brown
2011-08-10  1:21       ` [alsa-devel] " Barry Song
2011-08-10  4:51         ` Mark Brown
2011-08-10  5:57           ` Barry Song
2011-08-10  6:30             ` Mark Brown
2011-08-12  3:16               ` Barry Song
2011-08-12  3:53                 ` Dmitry Torokhov
2011-08-12  4:35                   ` Barry Song
2011-08-12  4:41                   ` [alsa-devel] " Mark Brown
2011-08-12  5:57                     ` Dmitry Torokhov
2011-08-12  6:07                       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110808085459.GA12376@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=21cnbao@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=grant.likely@secretlab.ca \
    --cc=linux-input@vger.kernel.org \
    --cc=lrg@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).