From: "Henrik Rydberg" <rydberg@euromail.se>
To: Jiri Kosina <jkosina@suse.cz>
Cc: "Benjamin Tissoires" <benjamin.tissoires@gmail.com>,
"Sean Young" <sean@mess.org>,
linux-input <linux-input@vger.kernel.org>,
"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Stéphane Chatty" <chatty@enac.fr>
Subject: Re: BUG: hid-multitouch causes 10 second delay and error
Date: Tue, 1 Nov 2011 15:17:04 +0100 [thread overview]
Message-ID: <20111101141704.GA2135@polaris.bitmath.org> (raw)
In-Reply-To: <alpine.LNX.2.00.1110281913010.3541@pobox.suse.cz>
>From bc81ba588149a0058ca083f673cb22ff543e5af8 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 1 Nov 2011 13:20:59 +0100
Subject: [PATCH 1/2] Revert "HID: multitouch: decide if hid-multitouch needs
to handle mt devices"
This reverts commit 0db3bfc72adf0cb70f08dfe92e4040f64e25e205.
The generic detection of hid-mt devices has two major flaws, and was
merged prematurely. Firstly, the hid-multitouch gets loaded even when
the device is handled by a special device. Secondly, the patch only
partially duplicates the device whitelist already present in hid-core,
effectively rendering a number of devices non-functional.
Reported-by: Sean Young <sean@mess.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
---
Hi Jiri,
Unfortunately, the recently discussed solution does not seem to work,
so there is only a revert for now.
I was planning to send a second patch, very small and concise, based
on Benjamins patch, but
1. It still does not resolve the
hid-multitouch-gets-loaded-for-every-hid-device problem, and
2. It did not work after removing the tested device from the hid core
whitelist; the device quirk seemed to get lost in the process.
In other words, there is currently no viable solution.
Thanks,
Henrik
drivers/hid/hid-multitouch.c | 47 +++--------------------------------------
1 files changed, 4 insertions(+), 43 deletions(-)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index fa5d7a1..f1c909f 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -291,7 +291,6 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
td->last_slot_field = usage->hid;
td->last_field_index = field->index;
td->last_mt_collection = usage->collection_index;
- hdev->quirks &= ~HID_QUIRK_MULTITOUCH;
return 1;
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
@@ -530,44 +529,12 @@ static void mt_set_input_mode(struct hid_device *hdev)
}
}
-/* a list of devices for which there is a specialized multitouch driver */
-static const struct hid_device_id mt_have_special_driver[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, 0x0001) },
- { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, 0x0006) },
- { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
- USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
- { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
- USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
- { }
-};
-
-static bool mt_match_one_id(struct hid_device *hdev,
- const struct hid_device_id *id)
-{
- return id->bus == hdev->bus &&
- (id->vendor == HID_ANY_ID || id->vendor == hdev->vendor) &&
- (id->product == HID_ANY_ID || id->product == hdev->product);
-}
-
-static const struct hid_device_id *mt_match_id(struct hid_device *hdev,
- const struct hid_device_id *id)
-{
- for (; id->bus; id++)
- if (mt_match_one_id(hdev, id))
- return id;
-
- return NULL;
-}
-
static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret, i;
struct mt_device *td;
struct mt_class *mtclass = mt_classes; /* MT_CLS_DEFAULT */
- if (mt_match_id(hdev, mt_have_special_driver))
- return -ENODEV;
-
for (i = 0; mt_classes[i].name ; i++) {
if (id->driver_data == mt_classes[i].name) {
mtclass = &(mt_classes[i]);
@@ -575,6 +542,10 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
}
+ /* This allows the driver to correctly support devices
+ * that emit events over several HID messages.
+ */
+ hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
td = kzalloc(sizeof(struct mt_device), GFP_KERNEL);
if (!td) {
@@ -590,16 +561,10 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (ret != 0)
goto fail;
- hdev->quirks |= HID_QUIRK_MULTITOUCH;
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
goto fail;
- /* This allows the driver to correctly support devices
- * that emit events over several HID messages.
- */
- hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
-
td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
GFP_KERNEL);
if (!td->slots) {
@@ -793,10 +758,6 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_XAT,
USB_DEVICE_ID_XAT_CSR) },
- /* Rest of the world */
- { .driver_data = MT_CLS_DEFAULT,
- HID_USB_DEVICE(HID_ANY_ID, HID_ANY_ID) },
-
{ }
};
MODULE_DEVICE_TABLE(hid, mt_devices);
--
1.7.7.1
next prev parent reply other threads:[~2011-11-01 14:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-26 21:37 BUG: hid-multitouch causes 10 second delay and error Sean Young
2011-10-27 9:25 ` Benjamin Tissoires
2011-10-27 11:54 ` Benjamin Tissoires
2011-10-27 20:35 ` Sean Young
2011-10-28 11:16 ` Henrik Rydberg
2011-10-28 13:19 ` Benjamin Tissoires
2011-10-28 14:00 ` Henrik Rydberg
2011-10-28 17:14 ` Jiri Kosina
2011-11-01 14:17 ` Henrik Rydberg [this message]
2011-11-01 14:27 ` Jiri Kosina
2011-11-01 15:33 ` Henrik Rydberg
2011-11-02 8:23 ` Benjamin Tissoires
2011-11-02 10:12 ` Henrik Rydberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111101141704.GA2135@polaris.bitmath.org \
--to=rydberg@euromail.se \
--cc=benjamin.tissoires@gmail.com \
--cc=chatty@enac.fr \
--cc=dmitry.torokhov@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=sean@mess.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).