From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Torokhov Subject: Re: [RFC] Input: Remove unsafe device module references Date: Tue, 1 Nov 2011 10:52:10 -0700 Message-ID: <20111101175210.GA15216@core.coreip.homeip.net> References: <1320162100-13494-1-git-send-email-dh.herrmann@googlemail.com> <20111101170156.GA8925@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20111101170156.GA8925@suse.de> Sender: linux-kernel-owner@vger.kernel.org To: Greg KH Cc: David Herrmann , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-input@vger.kernel.org On Tue, Nov 01, 2011 at 10:01:56AM -0700, Greg KH wrote: > On Tue, Nov 01, 2011 at 04:41:40PM +0100, David Herrmann wrote: > > Hi Dmitry and Greg > > > > It doesn't make sense to take a reference to our own module. When we call > > module_put(THIS_MODULE) we cannot make sure that our module is still alive when > > this function returns. Therefore, module_put() will return to invalid memory and > > our input_dev_release() function is no longer available. > > > > It would be interesting if Greg could elaborate what else we could do to replace > > this module-refcount as it is definitely needed here. However, "struct device" > > doesn't provide an owner field so there is no way for us to let the device core > > keep a reference to our module. > > For a bus module, yes, this is needed, so don't remove these calls, it's > wrong to do so. Strictly speaking, David is right, there is a race condition here. However since we do module_put() as very last operation of input_dev_release() it is extremely hard to trigger this race. Until we have a better way of pinning the bus (or class) implementation in memory we should keep __module_get/module_put in input core. -- Dmitry