From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: "Poddar, Sourav" <sourav.poddar@ti.com>
Cc: linux-input@vger.kernel.org, linux-omap@vger.kernel.org,
balbi@ti.com, akpm@linux-foundation.org
Subject: Re: [RESEND/PATCHv2] Input: omap-keypad: dynamically handle register offsets
Date: Wed, 9 May 2012 00:45:39 -0700 [thread overview]
Message-ID: <20120509074539.GI10514@core.coreip.homeip.net> (raw)
In-Reply-To: <CAKdam56kv2qia-2DMeTRMYwWJbskOeiJkW46wJqfMU9-pVkXwQ@mail.gmail.com>
> Hi Dmitry ,
>
>
> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
> > Ho Sourav,
> >
> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote:
> >>
> >> -config KEYBOARD_OMAP4
> >> - tristate "TI OMAP4 keypad support"
> >> +config KEYBOARD_OMAP4+
> >
> > I think this works purely by accident - '+' sign getting dropped by
> > parser...
> >
> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input)
> >>
> >> disable_irq(keypad_data->irq);
> >>
> >> - __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
> >> - keypad_data->base + OMAP4_KBD_CTRL);
> >> - __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
> >> - keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
> >> - __raw_writel(OMAP4_VAL_IRQDISABLE,
> >> - keypad_data->base + OMAP4_KBD_IRQSTATUS);
> >> - __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> >> - keypad_data->base + OMAP4_KBD_IRQENABLE);
> >> - __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
> >> - keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
> >> + keypad_data->revision = kbd_read_revision(keypad_data,
> >> + OMAP4_KBD_REVISION);
> >> + switch (keypad_data->revision) {
> >> + case 1:
> >> + keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c;
> >> + keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c;
> >> + keypad_data->reg_offset = 0x10;
> >> + break;
> >
> > This should be done in probe().
> >
> Dont we then require "pm_runtime_put_sync" in probe, since we are trying
> to read the keypad revision register.?
Ah, indeed, but I think not pm_runtime_get_sync() but
pm_runtime_set_active().
Not sure if this will fix the crash...
--
Dmitry
Input: omap-keypad - dynamically handle register offsets
From: G, Manjunath Kondaiah <manjugk@ti.com>
Keypad controller register offsets are different for omap4
and omap5. Handle these offsets through static mapping and
assign these mappings during run time.
Tested on omap4430 sdp with 3.4-rc3.
Tested on omap5430evm with 3.1-custom kernel.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/keyboard/Kconfig | 4 +
drivers/input/keyboard/omap4-keypad.c | 117 ++++++++++++++++++++++++++-------
2 files changed, 94 insertions(+), 27 deletions(-)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 20a3753..84ee155 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -531,9 +531,9 @@ config KEYBOARD_OMAP
module will be called omap-keypad.
config KEYBOARD_OMAP4
- tristate "TI OMAP4 keypad support"
+ tristate "TI OMAP4+ keypad support"
help
- Say Y here if you want to use the OMAP4 keypad.
+ Say Y here if you want to use the OMAP4+ keypad.
To compile this driver as a module, choose M here: the
module will be called omap4-keypad.
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index e809ac0..c9fd0df 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -68,19 +68,52 @@
#define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF
+enum {
+ KBD_REVISION_OMAP4 = 0,
+ KBD_REVISION_OMAP5,
+};
+
struct omap4_keypad {
struct input_dev *input;
void __iomem *base;
- int irq;
+ unsigned int irq;
unsigned int rows;
unsigned int cols;
+ u32 reg_offset;
+ u32 irqreg_offset;
unsigned int row_shift;
unsigned char key_state[8];
unsigned short keymap[];
};
+static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
+{
+ return __raw_readl(keypad_data->base +
+ keypad_data->reg_offset + offset);
+}
+
+static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
+{
+ __raw_writel(value,
+ keypad_data->base + keypad_data->reg_offset + offset);
+}
+
+static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
+{
+ return __raw_readl(keypad_data->base +
+ keypad_data->irqreg_offset + offset);
+}
+
+static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
+ u32 offset, u32 value)
+{
+ __raw_writel(value,
+ keypad_data->base + keypad_data->irqreg_offset + offset);
+}
+
+
/* Interrupt handler */
static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
{
@@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
u32 *new_state = (u32 *) key_state;
/* Disable interrupts */
- __raw_writel(OMAP4_VAL_IRQDISABLE,
- keypad_data->base + OMAP4_KBD_IRQENABLE);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_VAL_IRQDISABLE);
- *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
- *(new_state + 1) = __raw_readl(keypad_data->base
- + OMAP4_KBD_FULLCODE63_32);
+ *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
+ *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
for (row = 0; row < keypad_data->rows; row++) {
changed = key_state[row] ^ keypad_data->key_state[row];
@@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
sizeof(keypad_data->key_state));
/* clear pending interrupts */
- __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
- keypad_data->base + OMAP4_KBD_IRQSTATUS);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+ kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
/* enable interrupts */
- __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
- keypad_data->base + OMAP4_KBD_IRQENABLE);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_DEF_IRQENABLE_EVENTEN |
+ OMAP4_DEF_IRQENABLE_LONGKEY);
return IRQ_HANDLED;
}
@@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
disable_irq(keypad_data->irq);
- __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
- keypad_data->base + OMAP4_KBD_CTRL);
- __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
- keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
- __raw_writel(OMAP4_VAL_IRQDISABLE,
- keypad_data->base + OMAP4_KBD_IRQSTATUS);
- __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
- keypad_data->base + OMAP4_KBD_IRQENABLE);
- __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
- keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
+ kbd_writel(keypad_data, OMAP4_KBD_CTRL,
+ OMAP4_VAL_FUNCTIONALCFG);
+ kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
+ OMAP4_VAL_DEBOUNCINGTIME);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+ OMAP4_VAL_IRQDISABLE);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_DEF_IRQENABLE_EVENTEN |
+ OMAP4_DEF_IRQENABLE_LONGKEY);
+ kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
+ OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
enable_irq(keypad_data->irq);
@@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
disable_irq(keypad_data->irq);
/* Disable interrupts */
- __raw_writel(OMAP4_VAL_IRQDISABLE,
- keypad_data->base + OMAP4_KBD_IRQENABLE);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_VAL_IRQDISABLE);
/* clear pending interrupts */
- __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
- keypad_data->base + OMAP4_KBD_IRQSTATUS);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+ kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
enable_irq(keypad_data->irq);
@@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
struct resource *res;
resource_size_t size;
unsigned int row_shift, max_keys;
+ int rev;
int irq;
int error;
@@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
keypad_data->rows = pdata->rows;
keypad_data->cols = pdata->cols;
+ /*
+ * Mark device as active (and wake up its parent) so we can read
+ * revision register.
+ */
+ error = pm_runtime_set_active(&pdev->dev);
+ if (error) {
+ dev_err(&pdev->dev, "pm_runtime_set_active() failed\n");
+ goto err_unmap;
+ }
+
+ rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
+ rev &= 0x03 << 30;
+ rev >>= 30;
+ switch (rev) {
+ case KBD_REVISION_OMAP4:
+ keypad_data->reg_offset = 0x00;
+ keypad_data->irqreg_offset = 0x00;
+ break;
+ case KBD_REVISION_OMAP5:
+ keypad_data->reg_offset = 0x10;
+ keypad_data->irqreg_offset = 0x0c;
+ break;
+ default:
+ dev_err(&pdev->dev,
+ "Keypad reports unsupported revision %d", rev);
+ error = -EINVAL;
+ goto err_pm_suspended;
+ }
+
/* input device allocation */
keypad_data->input = input_dev = input_allocate_device();
if (!input_dev) {
error = -ENOMEM;
- goto err_unmap;
+ goto err_pm_suspended;
}
input_dev->name = pdev->name;
@@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
}
pm_runtime_enable(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
error = input_register_device(keypad_data->input);
if (error < 0) {
@@ -296,6 +361,8 @@ err_pm_disable:
free_irq(keypad_data->irq, keypad_data);
err_free_input:
input_free_device(input_dev);
+err_pm_suspended:
+ pm_runtime_set_suspended(&pdev->dev);
err_unmap:
iounmap(keypad_data->base);
err_release_mem:
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-05-09 7:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-26 5:54 [RESEND/PATCHv2] Input: omap-keypad: dynamically handle register offsets Sourav Poddar
2012-05-08 17:26 ` Poddar, Sourav
2012-05-09 5:18 ` Dmitry Torokhov
2012-05-09 6:54 ` Poddar, Sourav
2012-05-09 7:07 ` Poddar, Sourav
2012-05-09 7:45 ` Dmitry Torokhov [this message]
2012-05-09 9:44 ` Poddar, Sourav
2012-05-09 10:07 ` Poddar, Sourav
2012-05-17 13:31 ` Poddar, Sourav
2012-05-17 15:25 ` Dmitry Torokhov
2012-05-18 4:34 ` Poddar, Sourav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120509074539.GI10514@core.coreip.homeip.net \
--to=dmitry.torokhov@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=balbi@ti.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=sourav.poddar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).