From: littlebat <dashing.meng@gmail.com>
To: Seth Forshee <seth.forshee@canonical.com>
Cc: linux-input@vger.kernel.org, 679750@bugs.debian.org,
jrnieder@gmail.com, rik.theys@gmail.com
Subject: Bug#679750: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information)
Date: Sat, 7 Jul 2012 13:35:19 +0800 [thread overview]
Message-ID: <20120707133519.25bf82d4.dashing.meng@gmail.com> (raw)
In-Reply-To: <20120706051141.GA2937@thinkpad-t410>
[-- Attachment #1: Type: text/plain, Size: 5880 bytes --]
On Fri, 6 Jul 2012 00:11:41 -0500
Seth Forshee <seth.forshee@canonical.com> wrote:
> On Fri, Jul 06, 2012 at 11:39:42AM +0800, littlebat wrote:
> > I found these lines in my dmesg information:
> > [ 19.995850] psmouse serio4: alps: E6 report: 00 00 64
> > [ 20.021288] psmouse serio4: alps: E7 report: 73 03 50
> > [ 20.623609] input: PS/2 Generic Mouse
> > as /devices/platform/i8042/serio4/input/input9
>
> Thanks, this is the information we need to check whether or not your
> touchpad uses any of the known ALPS protocols.
>
> I'm attaching a patch to use as a starting point. Basically we're just
> going to try each protocol version until either we find one that works
> or run out of options. You should have an external mouse available,
> because it's likely that your touchpad will not be usable. I've also
> heard that some of the workarounds that people use to get the "disable
> touchpad while typing" behavior can cause the touchpad to no longer
> function once it starts behaving as a touchpad, so you should look out
> for that as well.
>
> I won't be able to respond further until next Monday, but it's pretty
> simple to modify the driver to try different protocol versions so I'll
> give you some instructions. The patch adds the following line. I've
> identified the two fields you'll need to change.
>
> { { 0x73, 0x03, 0x50 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
> ^ ^
> | |
> command_mode_resp |
> proto_version
>
> Not surprisingly, to try different protocol versions you just need to
> change the proto_version field. Try ALPS_PROTO_V4 first, if that
> doesn't work try ALPS_PROTO_V3, etc., until you've tried them all or
> found one that works.
>
> The first time you run the patch though you need to be on the lookout
> for a message in dmesg that says "Unknown command mode response"
> followed by two hex digits. If you see this then you need to change
> command_mode_resp to match the response printed in the message. Be
> sure to leave the 0x characters in place; only replace the 8a
> characters. Then try the same protocol version again.
>
> The basic test procedure after booting with a test version of the
> driver is:
>
> 1. Check dmesg for any errors from the alps driver. If you see
> anything other than the "Unknown command mode response" message then
> it probably means your touchpad doesn't use that protocol version, so
> you should move on to the next one. If the device name isn't
> showing up as something with ALPS in it, that also indicates your
> device isn't using that version.
>
> 2. Thoroughly test the touchpad. You may see erratic behavior -- the
> pointer jumping around, random clicks, etc -- which means it's
> using a different protocol.
>
> If you find a protocol version that works, let me know and I'll help
> get it added to the driver. If you don't then there's not much more I
> can do to help without hardware.
Thanks.
I have changed "proto_version" from V4 to V1, and changed
"command_mode_resp" to 0x73(followed by unknown response while entering
command mode: 73 01 0d) or 0x8a, 0x00, etc.. But, none of them works.
Briefly, "proto_version" V4 with "command_mode_resp" 0x00, 0x01, 0x73,
0x0d and V3 with 0x0d, 0x73, show the almost same symptoms:
1, dmesg output:
[ 19.105550] psmouse serio4: alps: E6 report: 00 00 64
[ 19.130028] psmouse serio4: alps: E7 report: 73 03 50
[ 19.149304] psmouse serio4: alps: unknown response while entering
command mode: 73 01 0d
[ 19.149311] psmouse serio4: alps: touchpad failed to enter command
mode
2, xinput --list shows it is a "PS/2 Generic Mouse"
3, No "touchpad" found in "Xorg.0.log" except "PS/2 Generic Mouse"
4, No touchpad tab in gnome mouse setting dialog.
Detail information see attachments, here is V4 with 0x73:
V4-73-dmesg.txt, V4-73-inputdevices.txt, V4-73-xinputlist.txt,
V4-73-Xorg.0.log
And, V2 or V1 with 0x8a or 0x00, show the almost same symptoms below:
1, dmesg output:
[ 19.935069] psmouse serio4: alps: E6 report: 00 00 64
[ 19.960457] psmouse serio4: alps: E7 report: 73 03 50
[ 20.000732] psmouse serio4: alps: Status: 10 00 0a
[ 20.026497] input: PS/2 Mouse
as /devices/platform/i8042/serio4/input/input9
[ 20.042797] input: AlpsPS/2 ALPS GlidePoint
as /devices/platform/i8042/serio4/input/input10
2, xinput --list shows there are "AlpsPS/2 ALPS GlidePoint" and "PS/2
Mouse"
3, Xorg.0.log shows:
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
...
But,
[ 30.245] (EE) Query no Synaptics: 6003C8
[ 30.245] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[ 30.245] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize
Synaptics hardware.
[ 30.257] (EE) PreInit returned 11 for "AlpsPS/2 ALPS GlidePoint"
4, There is touchpad tab in gnome mouse setting dialog, but the
functions of "edge scrolling" and "disable touchpad when typing" still
can't work even if I can setup them in touchpad tab in gnome mouse
setting dialog.
Detail information see attachments, here is V2 with 0x00:
V2-00-dmesg.txt, V2-00-inputdevices.txt, V2-00-xinputlist.txt,
V2-00-Xorg.0.log
I have also changed "command_mode_resp" and even the other fields I can
find in the alps.c, but no lucky. V4, V3 can't find the touchpad, V2,
V1 can find a touchpad but still can't work.
What's the next step can I do?
Thanks.
PS: I found linux-input@vger.kernel.org archived the posts at
http://www.spinics.net/lists/linux-input/ several hours later after
post even if I hadn't subscribed this mail list at that time. But, it
seems don't archived post with big size attachment(My previous post
"Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with
newly dmesg information)" with 6 attachments hasn't been archived after
posting 24h later. )
[-- Attachment #2: V4-73-dmesg.txt --]
[-- Type: text/plain, Size: 51991 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4debugpsmouse (mengdaxing@ldebian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Jul 6 07:44:49 CST 2012
[ 0.000000] Command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007727c000 (usable)
[ 0.000000] BIOS-e820: 000000007727c000 - 0000000077282000 (reserved)
[ 0.000000] BIOS-e820: 0000000077282000 - 00000000773ee000 (usable)
[ 0.000000] BIOS-e820: 00000000773ee000 - 000000007740f000 (reserved)
[ 0.000000] BIOS-e820: 000000007740f000 - 000000007746f000 (usable)
[ 0.000000] BIOS-e820: 000000007746f000 - 0000000077470000 (reserved)
[ 0.000000] BIOS-e820: 0000000077470000 - 00000000774f1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000774f1000 - 000000007770f000 (reserved)
[ 0.000000] BIOS-e820: 000000007770f000 - 0000000077717000 (usable)
[ 0.000000] BIOS-e820: 0000000077717000 - 000000007771f000 (reserved)
[ 0.000000] BIOS-e820: 000000007771f000 - 000000007775e000 (usable)
[ 0.000000] BIOS-e820: 000000007775e000 - 000000007779f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007779f000 - 00000000777e1000 (usable)
[ 0.000000] BIOS-e820: 00000000777e1000 - 00000000777ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000777ff000 - 0000000077800000 (usable)
[ 0.000000] BIOS-e820: 0000000077800000 - 000000007c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0804000 - 00000000f0805000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO G360 /LL1 , BIOS 61CN06WW 10/27/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x77800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 078000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f6200] f6200
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077800000
[ 0.000000] 0000000000 - 0077800000 page 2M
[ 0.000000] kernel direct mapping tables up to 77800000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 6fc5c000 - 7726c000
[ 0.000000] ACPI: RSDP 00000000000f60c0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000777f2fcb 0005C (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000777e3000 000F4 (v03 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 00000000777e4000 0BBBF (v02 LENOVO CB-01 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 000000007779bfc0 00040
[ 0.000000] ACPI: HPET 00000000777fed86 00038 (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 00000000777fedbe 0003C (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 00000000777fedfa 00068 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000777fee62 00028 (v01 LENOVO CB-01 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000777fee8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000777e2000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077800000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000077800000
[ 0.000000] NODE_DATA [00000000777dd000 - 00000000777e0fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006d600000-ffff88006f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0007727c
[ 0.000000] 0: 0x00077282 -> 0x000773ee
[ 0.000000] 0: 0x0007740f -> 0x0007746f
[ 0.000000] 0: 0x0007770f -> 0x00077717
[ 0.000000] 0: 0x0007771f -> 0x0007775e
[ 0.000000] 0: 0x0007779f -> 0x000777e1
[ 0.000000] 0: 0x000777ff -> 0x00077800
[ 0.000000] On node 0 totalpages: 488542
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6636 pages used for memmap
[ 0.000000] DMA32 zone: 477926 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007727c000 - 0000000077282000
[ 0.000000] PM: Registered nosave memory: 00000000773ee000 - 000000007740f000
[ 0.000000] PM: Registered nosave memory: 000000007746f000 - 0000000077470000
[ 0.000000] PM: Registered nosave memory: 0000000077470000 - 00000000774f1000
[ 0.000000] PM: Registered nosave memory: 00000000774f1000 - 000000007770f000
[ 0.000000] PM: Registered nosave memory: 0000000077717000 - 000000007771f000
[ 0.000000] PM: Registered nosave memory: 000000007775e000 - 000000007779f000
[ 0.000000] PM: Registered nosave memory: 00000000777e1000 - 00000000777ff000
[ 0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006fa00000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 481845
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1795820k/1957888k available (3581k kernel code, 3720k absent, 158348k reserved, 3112k data, 604k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 7864320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2127.875 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.75 BogoMIPS (lpj=8511500)
[ 0.000151] pid_max: default: 32768 minimum: 301
[ 0.000262] Security Framework initialized
[ 0.000338] AppArmor: AppArmor disabled by boot time parameter
[ 0.000550] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001356] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001763] Mount-cache hash table entries: 256
[ 0.002042] Initializing cgroup subsys cpuacct
[ 0.002115] Initializing cgroup subsys memory
[ 0.002198] Initializing cgroup subsys devices
[ 0.002270] Initializing cgroup subsys freezer
[ 0.002341] Initializing cgroup subsys net_cls
[ 0.002412] Initializing cgroup subsys blkio
[ 0.002488] Initializing cgroup subsys perf_event
[ 0.002586] CPU: Physical Processor ID: 0
[ 0.002657] CPU: Processor Core ID: 0
[ 0.002730] mce: CPU supports 9 MCE banks
[ 0.002810] CPU0: Thermal monitoring enabled (TM1)
[ 0.002889] using mwait in idle threads.
[ 0.003970] ACPI: Core revision 20120320
[ 0.023641] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063387] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05
[ 0.168637] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.168914] CPUID marked event: 'bus cycles' unavailable
[ 0.168993] ... version: 3
[ 0.169065] ... bit width: 48
[ 0.169138] ... generic registers: 4
[ 0.169212] ... value mask: 0000ffffffffffff
[ 0.169288] ... max period: 000000007fffffff
[ 0.169369] ... fixed-purpose events: 3
[ 0.169442] ... event mask: 000000070000000f
[ 0.169669] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.169864] Booting Node 0, Processors #1 Ok.
[ 0.180932] CPU1: Thermal monitoring handled by SMI
[ 0.183045] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.183167] Brought up 2 CPUs
[ 0.183237] Total of 2 processors activated (8511.50 BogoMIPS).
[ 0.184540] devtmpfs: initialized
[ 0.188736] PM: Registering ACPI NVS region [mem 0x77470000-0x774f0fff] (528384 bytes)
[ 0.188864] PM: Registering ACPI NVS region [mem 0x7775e000-0x7779efff] (266240 bytes)
[ 0.189079] dummy:
[ 0.189208] NET: Registered protocol family 16
[ 0.189408] ACPI: bus type pci registered
[ 0.189562] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.189673] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.234956] PCI: Using configuration type 1 for base access
[ 0.235661] bio: create slab <bio-0> at 0
[ 0.235826] ACPI: Added _OSI(Module Device)
[ 0.235905] ACPI: Added _OSI(Processor Device)
[ 0.235983] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.236060] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.237679] ACPI: EC: Look up EC in DSDT
[ 0.245777] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.246332] ACPI: SSDT 000000007771ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.246895] ACPI: Dynamic OEM Table Load:
[ 0.247058] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.247431] ACPI: SSDT 0000000077718018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.250461] ACPI: Dynamic OEM Table Load:
[ 0.250619] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.251168] ACPI: SSDT 0000000077719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.251801] ACPI: Dynamic OEM Table Load:
[ 0.251962] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.252320] ACPI: SSDT 0000000077717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.252897] ACPI: Dynamic OEM Table Load:
[ 0.253057] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.263407] ACPI: Interpreter enabled
[ 0.263483] ACPI: (supports S0 S3 S4 S5)
[ 0.263747] ACPI: Using IOAPIC for interrupt routing
[ 0.273151] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.273426] ACPI: No dock devices found.
[ 0.273505] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.274090] \_SB_.PCI0:_OSC invalid UUID
[ 0.274092] _OSC request data:1 8 1f
[ 0.274097] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.274921] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.275009] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.275090] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.275196] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.275300] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.275403] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.275509] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
[ 0.275649] PCI host bridge to bus 0000:00
[ 0.275724] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.275807] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.275889] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.275972] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.276056] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.276142] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.276228] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[ 0.276319] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.276338] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.276463] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.276497] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.276512] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.276524] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.276531] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.276537] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.276619] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.276646] pci 0000:00:1a.0: reg 10: [mem 0xf0806000-0xf08063ff]
[ 0.276759] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.276795] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.276816] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.276916] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.276948] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.277053] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.277086] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.277190] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.277226] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.277329] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.277372] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.277398] pci 0000:00:1d.0: reg 10: [mem 0xf0806400-0xf08067ff]
[ 0.277511] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.277541] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.277631] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.277767] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.277796] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.277808] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.277820] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.277832] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.277843] pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f]
[ 0.277856] pci 0000:00:1f.2: reg 24: [mem 0xf0805000-0xf08057ff]
[ 0.277925] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.277952] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.277973] pci 0000:00:1f.3: reg 10: [mem 0xf0806800-0xf08068ff 64bit]
[ 0.278005] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.278058] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.278087] pci 0000:00:1f.6: reg 10: [mem 0xf0804000-0xf0804fff 64bit]
[ 0.278237] pci 0000:01:00.0: [10de:0a70] type 00 class 0x030000
[ 0.278252] pci 0000:01:00.0: reg 10: [mem 0xac000000-0xacffffff]
[ 0.278269] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.278285] pci 0000:01:00.0: reg 1c: [mem 0xae000000-0xafffffff 64bit pref]
[ 0.278297] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.278310] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.278407] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.278485] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.278488] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.278492] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.278551] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.278734] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.278778] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.278978] pci 0000:03:00.0: supports D1
[ 0.278980] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.279064] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.279150] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.279236] pci 0000:08:00.0: [1969:2060] type 00 class 0x020000
[ 0.279266] pci 0000:08:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
[ 0.279282] pci 0000:08:00.0: reg 18: [io 0x3000-0x307f]
[ 0.279411] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.284612] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.284705] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.284711] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.284792] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.284886] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.284889] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.284891] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.284894] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.284897] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.284899] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.284902] pci 0000:00:1e.0: bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[ 0.284932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.285202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.285280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.285447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.285516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.285591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.285739] \_SB_.PCI0:_OSC invalid UUID
[ 0.285741] _OSC request data:1 1f 1f
[ 0.285745] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.285865] \_SB_.PCI0:_OSC invalid UUID
[ 0.285867] _OSC request data:1 0 1d
[ 0.285871] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.285975] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.292254] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.292407] PCI host bridge to bus 0000:ff
[ 0.292487] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.292509] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.292531] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.292551] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.292570] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.292594] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.292629] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.292709] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.292817] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.293151] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.293782] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.294473] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.295105] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.295738] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.296483] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.297237] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.297935] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.298617] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.298732] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.298840] vgaarb: loaded
[ 0.298909] vgaarb: bridge control possible 0000:01:00.0
[ 0.298989] vgaarb: no bridge control possible 0000:00:02.0
[ 0.299098] PCI: Using ACPI for IRQ routing
[ 0.309104] PCI: pci_cache_line_size set to 64 bytes
[ 0.309201] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 0.309203] reserve RAM buffer: 000000007727c000 - 0000000077ffffff
[ 0.309209] reserve RAM buffer: 00000000773ee000 - 0000000077ffffff
[ 0.309214] reserve RAM buffer: 000000007746f000 - 0000000077ffffff
[ 0.309218] reserve RAM buffer: 0000000077717000 - 0000000077ffffff
[ 0.309222] reserve RAM buffer: 000000007775e000 - 0000000077ffffff
[ 0.309225] reserve RAM buffer: 00000000777e1000 - 0000000077ffffff
[ 0.309227] reserve RAM buffer: 0000000077800000 - 0000000077ffffff
[ 0.309364] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.309825] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.311923] Switching to clocksource hpet
[ 0.313813] pnp: PnP ACPI init
[ 0.313908] ACPI: bus type pnp registered
[ 0.314386] pnp 00:00: [bus 00-fe]
[ 0.314389] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.314391] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.314393] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.314396] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.314398] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.314400] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.314402] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.314406] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.314408] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.314410] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.314412] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.314415] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.314417] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.314419] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.314421] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.314423] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.314425] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.314427] pnp 00:00: [mem 0x7c000000-0xfeafffff window]
[ 0.314429] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.314486] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.314593] pnp 00:01: [io 0x0000-0x001f]
[ 0.314596] pnp 00:01: [io 0x0081-0x0091]
[ 0.314598] pnp 00:01: [io 0x0093-0x009f]
[ 0.314600] pnp 00:01: [io 0x00c0-0x00df]
[ 0.314602] pnp 00:01: [dma 4]
[ 0.314636] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.314646] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.314678] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.314767] pnp 00:03: [irq 0 disabled]
[ 0.314780] pnp 00:03: [irq 8]
[ 0.314782] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.314821] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.314832] pnp 00:04: [io 0x00f0]
[ 0.314838] pnp 00:04: [irq 13]
[ 0.314871] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.314884] pnp 00:05: [io 0x002e-0x002f]
[ 0.314886] pnp 00:05: [io 0x004e-0x004f]
[ 0.314888] pnp 00:05: [io 0x0061]
[ 0.314889] pnp 00:05: [io 0x0063]
[ 0.314891] pnp 00:05: [io 0x0065]
[ 0.314893] pnp 00:05: [io 0x0067]
[ 0.314895] pnp 00:05: [io 0x0070]
[ 0.314898] pnp 00:05: [io 0x0080]
[ 0.314900] pnp 00:05: [io 0x0092]
[ 0.314902] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.314904] pnp 00:05: [io 0x0680-0x069f]
[ 0.314905] pnp 00:05: [io 0x0500-0x050f]
[ 0.314907] pnp 00:05: [io 0x0600-0x0603]
[ 0.314909] pnp 00:05: [io 0xffff]
[ 0.314911] pnp 00:05: [io 0x0400-0x047f]
[ 0.314913] pnp 00:05: [io 0x1180-0x11ff]
[ 0.314915] pnp 00:05: [io 0x164e-0x164f]
[ 0.314916] pnp 00:05: [io 0xfe00]
[ 0.314918] pnp 00:05: [io 0x0068]
[ 0.314920] pnp 00:05: [io 0x006c]
[ 0.314922] pnp 00:05: [io 0x0700-0x070f]
[ 0.314985] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.315068] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.315148] system 00:05: [io 0x0600-0x0603] has been reserved
[ 0.315227] system 00:05: [io 0xffff] has been reserved
[ 0.315305] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.315385] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.315467] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.315549] system 00:05: [io 0xfe00] has been reserved
[ 0.315631] system 00:05: [io 0x0700-0x070f] has been reserved
[ 0.315715] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.315754] pnp 00:06: [io 0x06a0-0x06af]
[ 0.315756] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.315807] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.315888] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.315969] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.316019] pnp 00:07: [io 0x0070-0x0077]
[ 0.316058] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.316090] pnp 00:08: [io 0x0060]
[ 0.316092] pnp 00:08: [io 0x0064]
[ 0.316098] pnp 00:08: [irq 1]
[ 0.316135] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.316149] pnp 00:09: [irq 12]
[ 0.316183] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.316479] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.316482] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 0.316484] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.316486] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.316489] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.316491] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.316493] pnp 00:0a: [mem 0xfeaff000-0xfeafffff]
[ 0.316496] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.316499] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.316501] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.316503] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.316505] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.316507] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.316572] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.316655] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.316736] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.316819] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.316904] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.316986] system 00:0a: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.317068] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.317151] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.317235] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.317319] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.317402] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.317485] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.317672] pnp 00:0b: [bus ff]
[ 0.317715] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.318045] pnp: PnP ACPI: found 12 devices
[ 0.318123] ACPI: ACPI bus type pnp unregistered
[ 0.325222] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.325227] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.325230] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[ 0.325242] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.325246] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.325259] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-08] add_size 200000
[ 0.325277] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.325280] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.325283] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.325286] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.325289] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.325291] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.325297] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7c000000-0x7c1fffff]
[ 0.325381] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.325489] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.325594] pci 0000:00:1c.4: BAR 15: assigned [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.325702] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.325784] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.325869] pci 0000:01:00.0: BAR 6: assigned [mem 0xad000000-0xad07ffff pref]
[ 0.325974] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.326051] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.326134] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.326218] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.326325] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.326406] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.326492] pci 0000:00:1c.0: bridge window [mem 0x7c000000-0x7c1fffff]
[ 0.326577] pci 0000:00:1c.0: bridge window [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.326687] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.326767] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.326854] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.326940] pci 0000:00:1c.1: bridge window [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.327051] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.327133] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.327218] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.327307] pci 0000:00:1c.4: bridge window [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.327416] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.327546] pci 0000:00:1e.0: setting latency timer to 64
[ 0.327550] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.327553] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.327555] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327557] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.327560] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.327562] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.327564] pci_bus 0000:00: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.327567] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.327569] pci_bus 0000:01: resource 1 [mem 0xac000000-0xadefffff]
[ 0.327571] pci_bus 0000:01: resource 2 [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.327573] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.327576] pci_bus 0000:02: resource 1 [mem 0x7c000000-0x7c1fffff]
[ 0.327578] pci_bus 0000:02: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.327580] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.327583] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.327585] pci_bus 0000:03: resource 2 [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.327587] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.327589] pci_bus 0000:08: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.327592] pci_bus 0000:08: resource 2 [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.327594] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.327596] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.327599] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327601] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.327603] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.327605] pci_bus 0000:0a: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.327608] pci_bus 0000:0a: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.327676] NET: Registered protocol family 2
[ 0.327847] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.328425] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.329808] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.330216] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.330298] TCP: reno registered
[ 0.330374] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.330468] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.330674] NET: Registered protocol family 1
[ 0.330770] pci 0000:00:02.0: Boot video device
[ 0.330926] PCI: CLS 64 bytes, default 64
[ 0.330978] Unpacking initramfs...
[ 3.241872] Freeing initrd memory: 120896k freed
[ 3.269558] Simple Boot Flag at 0x36 set to 0x1
[ 3.270132] audit: initializing netlink socket (disabled)
[ 3.270224] type=2000 audit(1341652373.152:1): initialized
[ 3.284521] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.285086] VFS: Disk quotas dquot_6.5.2
[ 3.285186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.285348] msgmni has been set to 3743
[ 3.285586] alg: No test for stdrng (krng)
[ 3.285690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.285795] io scheduler noop registered
[ 3.285868] io scheduler deadline registered
[ 3.285954] io scheduler cfq registered (default)
[ 3.286145] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.286366] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.286463] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.286545] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.287073] intel_idle: MWAIT substates: 0x120
[ 3.287075] intel_idle: v0.4 model 0x25
[ 3.287076] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.287115] GHES: HEST is not enabled!
[ 3.287249] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.287846] Linux agpgart interface v0.103
[ 3.287993] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 3.288189] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.289128] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 3.289357] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.289557] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.292912] i8042: Detected active multiplexing controller, rev 1.1
[ 3.294680] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.297259] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.297364] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.297461] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.297560] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.297750] mousedev: PS/2 mouse device common for all mice
[ 3.297880] rtc_cmos 00:07: RTC can wake from S4
[ 3.298095] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.298207] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.298329] cpuidle: using governor ladder
[ 3.298441] cpuidle: using governor menu
[ 3.298638] TCP: cubic registered
[ 3.298794] NET: Registered protocol family 10
[ 3.299140] Mobile IPv6
[ 3.299212] NET: Registered protocol family 17
[ 3.299288] Registering the dns_resolver key type
[ 3.300109] PM: Hibernation image not present or could not be loaded.
[ 3.300135] registered taskstats version 1
[ 3.300959] rtc_cmos 00:07: setting system clock to 2012-07-07 09:12:53 UTC (1341652373)
[ 3.301273] Initializing network drop monitor service
[ 3.315477] Freeing unused kernel memory: 604k freed
[ 3.315644] Write protecting the kernel read-only data: 6144k
[ 3.317701] Freeing unused kernel memory: 496k freed
[ 3.320521] Freeing unused kernel memory: 720k freed
[ 3.343592] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.451144] udev[54]: starting version 164
[ 3.468043] usbcore: registered new interface driver usbfs
[ 3.468148] usbcore: registered new interface driver hub
[ 3.468975] usbcore: registered new device driver usb
[ 3.469904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.470035] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.470040] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.470140] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.470271] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.474318] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.474344] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0806000
[ 3.482878] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.483010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.483092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.483197] usb usb1: Product: EHCI Host Controller
[ 3.483274] usb usb1: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.483357] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.483606] hub 1-0:1.0: USB hub found
[ 3.483683] hub 1-0:1.0: 3 ports detected
[ 3.483885] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.483889] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.483981] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.484114] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.488201] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.510396] SCSI subsystem initialized
[ 3.523678] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0806400
[ 3.530705] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.530819] ACPI: Thermal Zone [TZ00] (56 C)
[ 3.534765] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.534879] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.534963] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.535068] usb usb2: Product: EHCI Host Controller
[ 3.535147] usb usb2: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.535230] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.535415] hub 2-0:1.0: USB hub found
[ 3.535564] hub 2-0:1.0: 3 ports detected
[ 3.537996] libata version 3.00 loaded.
[ 3.539215] ahci 0000:00:1f.2: version 3.0
[ 3.539293] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.539335] ahci: SSS flag set, parallel bus scan disabled
[ 3.539462] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[ 3.539573] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 3.539688] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.555316] scsi0 : ahci
[ 3.555626] scsi1 : ahci
[ 3.555871] scsi2 : ahci
[ 3.556099] scsi3 : ahci
[ 3.556333] scsi4 : ahci
[ 3.556564] scsi5 : ahci
[ 3.556752] ata1: DUMMY
[ 3.556833] ata2: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805180 irq 41
[ 3.556950] ata3: DUMMY
[ 3.557027] ata4: DUMMY
[ 3.557108] ata5: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805300 irq 41
[ 3.557226] ata6: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805380 irq 41
[ 3.615140] atl1c 0000:08:00.0: version 1.0.1.0-NAPI
[ 3.794599] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.874565] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.926954] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.927079] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.927520] hub 1-1:1.0: USB hub found
[ 3.927792] hub 1-1:1.0: 6 ports detected
[ 3.927939] ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ205E, max UDMA/100
[ 3.928031] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.929050] ata2.00: configured for UDMA/100
[ 3.929254] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ20 PQ: 0 ANSI: 5
[ 4.038487] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.170850] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.170942] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.171423] hub 2-1:1.0: USB hub found
[ 4.171543] hub 2-1:1.0: 8 ports detected
[ 4.242584] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[ 4.246403] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.249441] ata5.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 4.255602] ata5.00: configured for UDMA/100
[ 4.263232] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 4.266381] Refined TSC clocksource calibration: 2127.999 MHz.
[ 4.266472] Switching to clocksource tsc
[ 4.338013] usb 1-1.1: New USB device found, idVendor=15d9, idProduct=0a4f
[ 4.338105] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.338217] usb 1-1.1: Product: USB OPTICAL MOUSE
[ 4.442517] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.537679] usb 2-1.2: New USB device found, idVendor=0079, idProduct=0011
[ 4.537773] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.537885] usb 2-1.2: Product: USB Gamepad
[ 4.544716] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
[ 4.545029] generic-usb 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0
[ 4.545270] usbcore: registered new interface driver usbhid
[ 4.545354] usbhid: USB HID core driver
[ 4.582256] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.589356] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.589530] sd 1:0:0:0: [sda] Write Protect is off
[ 4.589617] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.589747] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.594844] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.594958] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.595268] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.610415] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[ 4.717040] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 4.717202] usb 2-1.4: New USB device found, idVendor=5986, idProduct=0294
[ 4.717292] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.717402] usb 2-1.4: Product: Lenovo EasyCamera
[ 4.717485] usb 2-1.4: Manufacturer: Bison Corp.
[ 4.718250] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.722416] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.722618] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 5.504801] nbd: registered device at major 43
[ 5.520919] device-mapper: uevent: version 1.0.3
[ 5.521086] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.670530] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 17.628561] udev[413]: starting version 164
[ 17.878652] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 17.879234] ACPI: Lid Switch [LID]
[ 17.879369] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 17.879478] ACPI: Power Button [PWRB]
[ 17.879591] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 17.879702] ACPI: Sleep Button [SLPB]
[ 17.879818] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 17.879927] ACPI: Power Button [PWRF]
[ 18.087536] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 18.099301] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 18.102059] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 18.193981] ACPI: Requesting acpi_cpufreq
[ 18.281028] intel ips 0000:00:1f.6: No CPUID match found.
[ 18.281110] intel ips 0000:00:1f.6: IPS not supported on this CPU
[ 18.516890] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 18.517123] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.527739] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 18.543968] input: USB Gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
[ 18.544207] dragonrise 0003:0079:0011.0002: input,hidraw1: USB HID v1.10 Joystick [USB Gamepad ] on usb-0000:00:1d.0-1.2/input0
[ 18.625237] Linux media interface: v0.10
[ 18.874696] Linux video capture interface: v2.00
[ 18.986451] ACPI: Battery Slot [BAT1] (battery present)
[ 18.989490] ACPI: AC Adapter [ACAD] (on-line)
[ 18.994811] wmi: Mapper loaded
[ 19.062711] cfg80211: Calling CRDA to update world regulatory domain
[ 19.105550] psmouse serio4: alps: E6 report: 00 00 64
[ 19.130028] psmouse serio4: alps: E7 report: 73 03 50
[ 19.149304] psmouse serio4: alps: unknown response while entering command mode: 73 01 0d
[ 19.149311] psmouse serio4: alps: touchpad failed to enter command mode
[ 19.324387] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[ 19.607328] [drm] Initialized drm 1.1.0 20060810
[ 19.665378] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294)
[ 19.667566] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input9
[ 19.667738] usbcore: registered new interface driver uvcvideo
[ 19.667822] USB Video Class driver (1.1.1)
[ 19.772454] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input10
[ 21.049809] i915 0000:00:02.0: setting latency timer to 64
[ 21.103551] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 21.103563] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.103652] [drm] Driver supports precise vblank timestamp query.
[ 21.103813] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 21.103919] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.104027] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 21.510193] fbcon: inteldrmfb (fb0) is primary device
[ 21.619734] ath: EEPROM regdomain: 0x65
[ 21.619738] ath: EEPROM indicates we should expect a direct regpair map
[ 21.619743] ath: Country alpha2 being used: 00
[ 21.619746] ath: Regpair used: 0x65
[ 21.656989] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 21.657322] Registered led device: ath9k-phy0
[ 21.657329] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010920000, irq=17
[ 21.790523] Console: switching to colour frame buffer device 170x48
[ 21.798030] fb0: inteldrmfb frame buffer device
[ 21.798033] drm: registered panic notifier
[ 21.798420] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120320/video-1147)
[ 21.798474] video: probe of LNXVIDEO:00 failed with error 5
[ 21.801070] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[ 21.801253] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.801528] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.801680] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 21.873287] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 21.877417] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 21.877670] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 22.105384] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 22.170023] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 22.300074] loop: module loaded
[ 23.694904] fuse init (API version 7.18)
[ 24.305189] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.894367] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 26.861883] atl1c 0000:08:00.0: irq 44 for MSI/MSI-X
[ 27.882839] Clocksource tsc unstable (delta = -126514396 ns)
[ 27.884078] Switching to clocksource hpet
[ 28.224284] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.610345] sshd (1643): /proc/1643/oom_adj is deprecated, please use /proc/1643/oom_score_adj instead.
[ 54.585466] wlan0: authenticate with ec:17:2f:2f:e9:b6
[ 54.598924] wlan0: send auth to ec:17:2f:2f:e9:b6 (try 1/3)
[ 54.602121] wlan0: authenticated
[ 54.609165] wlan0: associate with ec:17:2f:2f:e9:b6 (try 1/3)
[ 54.613379] wlan0: RX AssocResp from ec:17:2f:2f:e9:b6 (capab=0x431 status=0 aid=1)
[ 54.613384] wlan0: associated
[ 54.620466] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[-- Attachment #3: V4-73-inputdevices.txt --]
[-- Type: text/plain, Size: 4000 bytes --]
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=15d9 Product=0a4f Version=0111
N: Name=" USB OPTICAL MOUSE"
P: Phys=usb-0000:00:1a.0-1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=0079 Product=0011 Version=0110
N: Name="USB Gamepad "
P: Phys=usb-0000:00:1d.0-1.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
U: Uniq=
H: Handlers=event7 js0
B: PROP=0
B: EV=1b
B: KEY=3ff00000000 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/ideapad/input/input8
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1400800000000 300000 0 0
B: MSC=10
I: Bus=0003 Vendor=5986 Product=0294 Version=1403
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input9
U: Uniq=
H: Handlers=kbd event9
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input10
U: Uniq=
H: Handlers=mouse1 event10
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0001 Vendor=10ec Product=0272 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
U: Uniq=
H: Handlers=event13
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event14
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0003 Vendor=0000 Product=0000 Version=0004
N: Name="ACPI Virtual Keyboard Device"
P: Phys=
S: Sysfs=/devices/virtual/input/input15
U: Uniq=
H: Handlers=sysrq kbd rfkill event15
B: PROP=0
B: EV=3
B: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
[-- Attachment #4: V4-73-xinputlist.txt --]
[-- Type: text/plain, Size: 4039 bytes --]
⎡ Virtual core pointer id=2 [master pointer (3)]
Reporting 3 classes:
Class originated from: 13
Buttons supported: 10
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None
Button state:
Class originated from: 13
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 13
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 4
Buttons supported: 10
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None
Button state:
Class originated from: 4
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 4
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
⎜ ↳ USB OPTICAL MOUSE id=10 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 10
Buttons supported: 7
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right
Button state:
Class originated from: 10
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 10
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ PS/2 Generic Mouse id=13 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 13
Buttons supported: 5
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down
Button state:
Class originated from: 13
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 13
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎣ Virtual core keyboard id=3 [master keyboard (2)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 5
Keycodes supported: 248
↳ Power Button id=6 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 6
Keycodes supported: 248
↳ Video Bus id=7 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 7
Keycodes supported: 248
↳ Power Button id=8 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 8
Keycodes supported: 248
↳ Sleep Button id=9 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 9
Keycodes supported: 248
↳ Lenovo EasyCamera id=11 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 11
Keycodes supported: 248
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Ideapad extra buttons id=14 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 14
Keycodes supported: 248
↳ ACPI Virtual Keyboard Device id=15 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 15
Keycodes supported: 248
[-- Attachment #5: V4-73-Xorg.0.log --]
[-- Type: application/octet-stream, Size: 30392 bytes --]
[ 30.146]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 30.146] X Protocol Version 11, Revision 0
[ 30.146] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
[ 30.146] Current Operating System: Linux ldebian 3.4.4debugpsmouse #1 SMP Fri Jul 6 07:44:49 CST 2012 x86_64
[ 30.146] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 30.146] Build Date: 28 August 2011 09:39:43PM
[ 30.146] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <kibi@debian.org>)
[ 30.146] Current version of pixman: 0.24.0
[ 30.146] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 30.146] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.146] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 7 09:13:20 2012
[ 30.166] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 30.166] (==) No Layout section. Using the first Screen section.
[ 30.166] (==) No screen section available. Using defaults.
[ 30.166] (**) |-->Screen "Default Screen Section" (0)
[ 30.166] (**) | |-->Monitor "<default monitor>"
[ 30.166] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 30.166] (==) Automatically adding devices
[ 30.166] (==) Automatically enabling devices
[ 30.166] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 30.166] Entry deleted from font path.
[ 30.166] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 30.166] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 30.166] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 30.166] (II) Loader magic: 0x7d3ae0
[ 30.166] (II) Module ABI versions:
[ 30.166] X.Org ANSI C Emulation: 0.4
[ 30.166] X.Org Video Driver: 10.0
[ 30.166] X.Org XInput driver : 12.2
[ 30.166] X.Org Server Extension : 5.0
[ 30.167] (--) PCI:*(0:0:2:0) 8086:0046:17aa:3920 rev 24, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 30.167] (--) PCI: (0:1:0:0) 10de:0a70:17aa:3968 rev 162, Mem @ 0xac000000/16777216, 0xb0000000/268435456, 0xae000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 30.167] (II) Open ACPI successful (/var/run/acpid.socket)
[ 30.167] (II) LoadModule: "extmod"
[ 30.196] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 30.196] (II) Module extmod: vendor="X.Org Foundation"
[ 30.196] compiled for 1.10.4, module version = 1.0.0
[ 30.196] Module class: X.Org Server Extension
[ 30.196] ABI class: X.Org Server Extension, version 5.0
[ 30.196] (II) Loading extension SELinux
[ 30.196] (II) Loading extension MIT-SCREEN-SAVER
[ 30.196] (II) Loading extension XFree86-VidModeExtension
[ 30.196] (II) Loading extension XFree86-DGA
[ 30.196] (II) Loading extension DPMS
[ 30.196] (II) Loading extension XVideo
[ 30.196] (II) Loading extension XVideo-MotionCompensation
[ 30.196] (II) Loading extension X-Resource
[ 30.196] (II) LoadModule: "dbe"
[ 30.196] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 30.197] (II) Module dbe: vendor="X.Org Foundation"
[ 30.197] compiled for 1.10.4, module version = 1.0.0
[ 30.197] Module class: X.Org Server Extension
[ 30.197] ABI class: X.Org Server Extension, version 5.0
[ 30.197] (II) Loading extension DOUBLE-BUFFER
[ 30.197] (II) LoadModule: "glx"
[ 30.197] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 30.197] (II) Module glx: vendor="X.Org Foundation"
[ 30.197] compiled for 1.10.4, module version = 1.0.0
[ 30.197] ABI class: X.Org Server Extension, version 5.0
[ 30.197] (==) AIGLX enabled
[ 30.197] (II) Loading extension GLX
[ 30.197] (II) LoadModule: "record"
[ 30.197] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 30.197] (II) Module record: vendor="X.Org Foundation"
[ 30.197] compiled for 1.10.4, module version = 1.13.0
[ 30.197] Module class: X.Org Server Extension
[ 30.197] ABI class: X.Org Server Extension, version 5.0
[ 30.197] (II) Loading extension RECORD
[ 30.197] (II) LoadModule: "dri"
[ 30.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 30.197] (II) Module dri: vendor="X.Org Foundation"
[ 30.197] compiled for 1.10.4, module version = 1.0.0
[ 30.198] ABI class: X.Org Server Extension, version 5.0
[ 30.198] (II) Loading extension XFree86-DRI
[ 30.198] (II) LoadModule: "dri2"
[ 30.198] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.198] (II) Module dri2: vendor="X.Org Foundation"
[ 30.198] compiled for 1.10.4, module version = 1.2.0
[ 30.198] ABI class: X.Org Server Extension, version 5.0
[ 30.198] (II) Loading extension DRI2
[ 30.198] (==) Matched intel as autoconfigured driver 0
[ 30.198] (==) Matched vesa as autoconfigured driver 1
[ 30.198] (==) Matched fbdev as autoconfigured driver 2
[ 30.198] (==) Assigned the driver to the xf86ConfigLayout
[ 30.198] (II) LoadModule: "intel"
[ 30.198] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 30.198] (II) Module intel: vendor="X.Org Foundation"
[ 30.198] compiled for 1.10.4, module version = 2.15.0
[ 30.198] Module class: X.Org Video Driver
[ 30.198] ABI class: X.Org Video Driver, version 10.0
[ 30.198] (II) LoadModule: "vesa"
[ 30.198] (WW) Warning, couldn't open module vesa
[ 30.198] (II) UnloadModule: "vesa"
[ 30.198] (II) Unloading vesa
[ 30.198] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 30.198] (II) LoadModule: "fbdev"
[ 30.199] (WW) Warning, couldn't open module fbdev
[ 30.199] (II) UnloadModule: "fbdev"
[ 30.199] (II) Unloading fbdev
[ 30.199] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 30.199] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 30.199] (++) using VT number 7
[ 30.207] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 30.207] drmOpenDevice: node name is /dev/dri/card0
[ 30.207] drmOpenDevice: open result is 9, (OK)
[ 30.207] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 30.207] drmOpenDevice: node name is /dev/dri/card0
[ 30.207] drmOpenDevice: open result is 9, (OK)
[ 30.207] drmOpenByBusid: drmOpenMinor returns 9
[ 30.207] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 30.207] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 30.207] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 30.207] (==) intel(0): RGB weight 888
[ 30.207] (==) intel(0): Default visual is TrueColor
[ 30.207] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 30.207] (--) intel(0): Chipset: "Arrandale"
[ 30.207] (**) intel(0): Relaxed fencing enabled
[ 30.207] (**) intel(0): Framebuffer tiled
[ 30.207] (**) intel(0): Pixmaps tiled
[ 30.207] (**) intel(0): 3D buffers tiled
[ 30.207] (**) intel(0): SwapBuffers wait enabled
[ 30.207] (==) intel(0): video overlay key set to 0x101fe
[ 30.207] (II) intel(0): Output LVDS1 has no monitor section
[ 30.208] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[ 30.208] (II) intel(0): Output VGA1 has no monitor section
[ 30.208] (II) intel(0): EDID for output LVDS1
[ 30.208] (II) intel(0): Manufacturer: AUO Model: 402c Serial#: 0
[ 30.208] (II) intel(0): Year: 2010 Week: 0
[ 30.208] (II) intel(0): EDID Version: 1.3
[ 30.208] (II) intel(0): Digital Display Input
[ 30.208] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 30.208] (II) intel(0): Gamma: 2.20
[ 30.208] (II) intel(0): No DPMS capabilities specified
[ 30.208] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 30.208] (II) intel(0): First detailed timing is preferred mode
[ 30.208] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.325 greenY: 0.540
[ 30.208] (II) intel(0): blueX: 0.150 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 30.208] (II) intel(0): Manufacturer's mask: 0
[ 30.208] (II) intel(0): Supported detailed timing:
[ 30.208] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 164 mm
[ 30.208] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1456 h_border: 0
[ 30.208] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 30.208] (II) intel(0): Unknown vendor-specific block f
[ 30.208] (II) intel(0): AUO
[ 30.208] (II) intel(0): B133XW04 V0
[ 30.208] (II) intel(0): EDID (in hex):
[ 30.208] (II) intel(0): 00ffffffffffff0006af2c4000000000
[ 30.208] (II) intel(0): 00140103801d10780a15859758538a26
[ 30.208] (II) intel(0): 25505400000001010101010101010101
[ 30.208] (II) intel(0): 010101010101121b565a500019303020
[ 30.208] (II) intel(0): 360025a4100000180000000f00000000
[ 30.208] (II) intel(0): 00000000000000000020000000fe0041
[ 30.208] (II) intel(0): 554f0a202020202020202020000000fe
[ 30.208] (II) intel(0): 004231333358573034205630200a0056
[ 30.208] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 30.208] (II) intel(0): Printing DDC gathered Modelines:
[ 30.208] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 30.208] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 30.208] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 30.208] (II) intel(0): Printing probed modes for output LVDS1
[ 30.208] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 30.208] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 30.208] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 30.208] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 30.208] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 30.208] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 30.208] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 30.208] (II) intel(0): EDID for output VGA1
[ 30.208] (II) intel(0): Output LVDS1 connected
[ 30.208] (II) intel(0): Output VGA1 disconnected
[ 30.208] (II) intel(0): Using exact sizes for initial modes
[ 30.209] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 30.209] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 30.209] (II) intel(0): Kernel page flipping support detected, enabling
[ 30.209] (**) intel(0): Display dimensions: (290, 160) mm
[ 30.209] (**) intel(0): DPI set to (119, 121)
[ 30.209] (II) Loading sub module "fb"
[ 30.209] (II) LoadModule: "fb"
[ 30.209] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 30.209] (II) Module fb: vendor="X.Org Foundation"
[ 30.209] compiled for 1.10.4, module version = 1.0.0
[ 30.209] ABI class: X.Org ANSI C Emulation, version 0.4
[ 30.209] (II) Loading sub module "dri2"
[ 30.209] (II) LoadModule: "dri2"
[ 30.209] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.209] (II) Module dri2: vendor="X.Org Foundation"
[ 30.209] compiled for 1.10.4, module version = 1.2.0
[ 30.209] ABI class: X.Org Server Extension, version 5.0
[ 30.209] (==) Depth 24 pixmap format is 32 bpp
[ 30.209] (II) intel(0): [DRI2] Setup complete
[ 30.209] (II) intel(0): [DRI2] DRI driver: i965
[ 30.209] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 30.217] (II) UXA(0): Driver registered support for the following operations:
[ 30.217] (II) solid
[ 30.217] (II) copy
[ 30.217] (II) composite (RENDER acceleration)
[ 30.217] (II) put_image
[ 30.217] (II) get_image
[ 30.217] (==) intel(0): Backing store disabled
[ 30.217] (==) intel(0): Silken mouse enabled
[ 30.217] (II) intel(0): Initializing HW Cursor
[ 30.280] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.280] (==) intel(0): DPMS enabled
[ 30.280] (==) intel(0): Intel XvMC decoder enabled
[ 30.280] (II) intel(0): Set up textured video
[ 30.280] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 30.280] (II) intel(0): direct rendering: DRI2 Enabled
[ 30.280] (==) intel(0): hotplug detection: "enabled"
[ 30.280] (--) RandR disabled
[ 30.281] (II) Initializing built-in extension Generic Event Extension
[ 30.281] (II) Initializing built-in extension SHAPE
[ 30.281] (II) Initializing built-in extension MIT-SHM
[ 30.281] (II) Initializing built-in extension XInputExtension
[ 30.281] (II) Initializing built-in extension XTEST
[ 30.281] (II) Initializing built-in extension BIG-REQUESTS
[ 30.281] (II) Initializing built-in extension SYNC
[ 30.281] (II) Initializing built-in extension XKEYBOARD
[ 30.281] (II) Initializing built-in extension XC-MISC
[ 30.281] (II) Initializing built-in extension SECURITY
[ 30.281] (II) Initializing built-in extension XINERAMA
[ 30.281] (II) Initializing built-in extension XFIXES
[ 30.281] (II) Initializing built-in extension RENDER
[ 30.281] (II) Initializing built-in extension RANDR
[ 30.281] (II) Initializing built-in extension COMPOSITE
[ 30.281] (II) Initializing built-in extension DAMAGE
[ 30.281] (II) SELinux: Disabled on system
[ 30.297] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.297] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.297] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.297] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 30.297] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.297] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 30.297] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.298] (II) intel(0): Setting screen physical size to 361 x 203
[ 30.389] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 30.389] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.389] (II) LoadModule: "evdev"
[ 30.389] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.389] (II) Module evdev: vendor="X.Org Foundation"
[ 30.389] compiled for 1.10.3, module version = 2.6.0
[ 30.389] Module class: X.Org XInput Driver
[ 30.389] ABI class: X.Org XInput driver, version 12.2
[ 30.389] (II) Using input driver 'evdev' for 'Power Button'
[ 30.389] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.389] (**) Power Button: always reports core events
[ 30.389] (**) Power Button: Device: "/dev/input/event5"
[ 30.389] (--) Power Button: Found keys
[ 30.389] (II) Power Button: Configuring as keyboard
[ 30.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 30.389] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.389] (**) Option "xkb_rules" "evdev"
[ 30.389] (**) Option "xkb_model" "pc105"
[ 30.389] (**) Option "xkb_layout" "us"
[ 30.393] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 30.394] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.394] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.394] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.394] (**) Video Bus: always reports core events
[ 30.394] (**) Video Bus: Device: "/dev/input/event11"
[ 30.394] (--) Video Bus: Found keys
[ 30.394] (II) Video Bus: Configuring as keyboard
[ 30.394] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event11"
[ 30.394] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 30.394] (**) Option "xkb_rules" "evdev"
[ 30.394] (**) Option "xkb_model" "pc105"
[ 30.394] (**) Option "xkb_layout" "us"
[ 30.402] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.402] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.402] (II) Using input driver 'evdev' for 'Power Button'
[ 30.402] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.402] (**) Power Button: always reports core events
[ 30.402] (**) Power Button: Device: "/dev/input/event3"
[ 30.402] (--) Power Button: Found keys
[ 30.402] (II) Power Button: Configuring as keyboard
[ 30.402] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.402] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.402] (**) Option "xkb_rules" "evdev"
[ 30.402] (**) Option "xkb_model" "pc105"
[ 30.402] (**) Option "xkb_layout" "us"
[ 30.402] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.403] (II) No input driver/identifier specified (ignoring)
[ 30.403] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 30.403] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.403] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.403] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.403] (**) Sleep Button: always reports core events
[ 30.403] (**) Sleep Button: Device: "/dev/input/event4"
[ 30.403] (--) Sleep Button: Found keys
[ 30.403] (II) Sleep Button: Configuring as keyboard
[ 30.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 30.403] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 30.403] (**) Option "xkb_rules" "evdev"
[ 30.403] (**) Option "xkb_model" "pc105"
[ 30.403] (**) Option "xkb_layout" "us"
[ 30.405] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 30.405] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 30.405] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 30.405] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.405] (**) USB OPTICAL MOUSE: always reports core events
[ 30.405] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 30.405] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 30.405] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 30.405] (--) USB OPTICAL MOUSE: Found relative axes
[ 30.405] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 30.405] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 30.405] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 30.405] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 30.405] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.405] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1"
[ 30.405] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE)
[ 30.405] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 30.405] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 30.405] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 30.405] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 30.405] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 30.406] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 30.406] (II) No input driver/identifier specified (ignoring)
[ 30.406] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 30.406] (II) No input driver/identifier specified (ignoring)
[ 30.406] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event13)
[ 30.406] (II) No input driver/identifier specified (ignoring)
[ 30.406] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event14)
[ 30.407] (II) No input driver/identifier specified (ignoring)
[ 30.408] (II) config/udev: Adding input device USB Gamepad (/dev/input/event7)
[ 30.408] (II) No input driver/identifier specified (ignoring)
[ 30.408] (II) config/udev: Adding input device USB Gamepad (/dev/input/js0)
[ 30.408] (II) No input driver/identifier specified (ignoring)
[ 30.408] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event9)
[ 30.408] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 30.408] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 30.408] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.409] (**) Lenovo EasyCamera: always reports core events
[ 30.409] (**) Lenovo EasyCamera: Device: "/dev/input/event9"
[ 30.409] (--) Lenovo EasyCamera: Found keys
[ 30.409] (II) Lenovo EasyCamera: Configuring as keyboard
[ 30.409] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input9/event9"
[ 30.409] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD)
[ 30.409] (**) Option "xkb_rules" "evdev"
[ 30.409] (**) Option "xkb_model" "pc105"
[ 30.409] (**) Option "xkb_layout" "us"
[ 30.412] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.412] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.412] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.412] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.412] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.412] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.412] (--) AT Translated Set 2 keyboard: Found keys
[ 30.412] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.412] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.412] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 30.412] (**) Option "xkb_rules" "evdev"
[ 30.412] (**) Option "xkb_model" "pc105"
[ 30.412] (**) Option "xkb_layout" "us"
[ 30.413] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event10)
[ 30.413] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 30.413] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 30.413] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.413] (**) PS/2 Generic Mouse: always reports core events
[ 30.413] (**) PS/2 Generic Mouse: Device: "/dev/input/event10"
[ 30.413] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 30.413] (--) PS/2 Generic Mouse: Found relative axes
[ 30.413] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 30.413] (II) PS/2 Generic Mouse: Configuring as mouse
[ 30.413] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 30.413] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.413] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[ 30.413] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
[ 30.413] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 30.413] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 30.413] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 30.413] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 30.413] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 30.413] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 30.413] (II) No input driver/identifier specified (ignoring)
[ 30.414] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 30.414] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.414] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 30.414] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.414] (**) Ideapad extra buttons: always reports core events
[ 30.414] (**) Ideapad extra buttons: Device: "/dev/input/event8"
[ 30.414] (--) Ideapad extra buttons: Found keys
[ 30.414] (II) Ideapad extra buttons: Configuring as keyboard
[ 30.414] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input8/event8"
[ 30.414] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD)
[ 30.414] (**) Option "xkb_rules" "evdev"
[ 30.414] (**) Option "xkb_model" "pc105"
[ 30.414] (**) Option "xkb_layout" "us"
[ 30.414] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 30.414] (II) No input driver/identifier specified (ignoring)
[ 30.417] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[ 30.418] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 30.418] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 30.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.418] (**) ACPI Virtual Keyboard Device: always reports core events
[ 30.418] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
[ 30.418] (--) ACPI Virtual Keyboard Device: Found keys
[ 30.418] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 30.418] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event15"
[ 30.418] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 30.418] (**) Option "xkb_rules" "evdev"
[ 30.418] (**) Option "xkb_model" "pc105"
[ 30.418] (**) Option "xkb_layout" "us"
[ 31.131] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.131] (II) intel(0): Printing DDC gathered Modelines:
[ 31.131] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.132] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.133] (II) intel(0): Printing DDC gathered Modelines:
[ 31.133] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.143] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.143] (II) intel(0): Printing DDC gathered Modelines:
[ 31.143] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.906] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.906] (II) intel(0): Printing DDC gathered Modelines:
[ 48.906] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.907] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.907] (II) intel(0): Printing DDC gathered Modelines:
[ 48.907] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.908] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.908] (II) intel(0): Printing DDC gathered Modelines:
[ 48.908] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 51.956] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 51.956] (II) intel(0): Printing DDC gathered Modelines:
[ 51.956] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[-- Attachment #6: V2-00-dmesg.txt --]
[-- Type: text/plain, Size: 52079 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4debugpsmouse (mengdaxing@ldebian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Fri Jul 6 07:44:49 CST 2012
[ 0.000000] Command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007727c000 (usable)
[ 0.000000] BIOS-e820: 000000007727c000 - 0000000077282000 (reserved)
[ 0.000000] BIOS-e820: 0000000077282000 - 00000000773ee000 (usable)
[ 0.000000] BIOS-e820: 00000000773ee000 - 000000007740f000 (reserved)
[ 0.000000] BIOS-e820: 000000007740f000 - 000000007746f000 (usable)
[ 0.000000] BIOS-e820: 000000007746f000 - 0000000077470000 (reserved)
[ 0.000000] BIOS-e820: 0000000077470000 - 00000000774f1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000774f1000 - 000000007770f000 (reserved)
[ 0.000000] BIOS-e820: 000000007770f000 - 0000000077717000 (usable)
[ 0.000000] BIOS-e820: 0000000077717000 - 000000007771f000 (reserved)
[ 0.000000] BIOS-e820: 000000007771f000 - 000000007775e000 (usable)
[ 0.000000] BIOS-e820: 000000007775e000 - 000000007779f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007779f000 - 00000000777e1000 (usable)
[ 0.000000] BIOS-e820: 00000000777e1000 - 00000000777ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000777ff000 - 0000000077800000 (usable)
[ 0.000000] BIOS-e820: 0000000077800000 - 000000007c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0804000 - 00000000f0805000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO G360 /LL1 , BIOS 61CN06WW 10/27/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x77800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 078000000 mask FF8000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f6200] f6200
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-0000000077800000
[ 0.000000] 0000000000 - 0077800000 page 2M
[ 0.000000] kernel direct mapping tables up to 77800000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 6fc5c000 - 7726c000
[ 0.000000] ACPI: RSDP 00000000000f60c0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000777f2fcb 0005C (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000777e3000 000F4 (v03 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 00000000777e4000 0BBBF (v02 LENOVO CB-01 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 000000007779bfc0 00040
[ 0.000000] ACPI: HPET 00000000777fed86 00038 (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 00000000777fedbe 0003C (v01 LENOVO CB-01 06040000 PTEC 00000001)
[ 0.000000] ACPI: APIC 00000000777fedfa 00068 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000777fee62 00028 (v01 LENOVO CB-01 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000777fee8a 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000777e2000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000077800000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000077800000
[ 0.000000] NODE_DATA [00000000777dd000 - 00000000777e0fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88006d600000-ffff88006f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x0007727c
[ 0.000000] 0: 0x00077282 -> 0x000773ee
[ 0.000000] 0: 0x0007740f -> 0x0007746f
[ 0.000000] 0: 0x0007770f -> 0x00077717
[ 0.000000] 0: 0x0007771f -> 0x0007775e
[ 0.000000] 0: 0x0007779f -> 0x000777e1
[ 0.000000] 0: 0x000777ff -> 0x00077800
[ 0.000000] On node 0 totalpages: 488542
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6636 pages used for memmap
[ 0.000000] DMA32 zone: 477926 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007727c000 - 0000000077282000
[ 0.000000] PM: Registered nosave memory: 00000000773ee000 - 000000007740f000
[ 0.000000] PM: Registered nosave memory: 000000007746f000 - 0000000077470000
[ 0.000000] PM: Registered nosave memory: 0000000077470000 - 00000000774f1000
[ 0.000000] PM: Registered nosave memory: 00000000774f1000 - 000000007770f000
[ 0.000000] PM: Registered nosave memory: 0000000077717000 - 000000007771f000
[ 0.000000] PM: Registered nosave memory: 000000007775e000 - 000000007779f000
[ 0.000000] PM: Registered nosave memory: 00000000777e1000 - 00000000777ff000
[ 0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006fa00000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 481845
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1795820k/1957888k available (3581k kernel code, 3720k absent, 158348k reserved, 3112k data, 604k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 7864320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2128.062 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.12 BogoMIPS (lpj=8512248)
[ 0.000152] pid_max: default: 32768 minimum: 301
[ 0.000262] Security Framework initialized
[ 0.000338] AppArmor: AppArmor disabled by boot time parameter
[ 0.000551] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001347] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001755] Mount-cache hash table entries: 256
[ 0.002035] Initializing cgroup subsys cpuacct
[ 0.002109] Initializing cgroup subsys memory
[ 0.002191] Initializing cgroup subsys devices
[ 0.002264] Initializing cgroup subsys freezer
[ 0.002336] Initializing cgroup subsys net_cls
[ 0.002408] Initializing cgroup subsys blkio
[ 0.002485] Initializing cgroup subsys perf_event
[ 0.002585] CPU: Physical Processor ID: 0
[ 0.002656] CPU: Processor Core ID: 0
[ 0.002729] mce: CPU supports 9 MCE banks
[ 0.002809] CPU0: Thermal monitoring enabled (TM1)
[ 0.002889] using mwait in idle threads.
[ 0.003999] ACPI: Core revision 20120320
[ 0.023651] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063400] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05
[ 0.171134] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.171408] CPUID marked event: 'bus cycles' unavailable
[ 0.171487] ... version: 3
[ 0.171563] ... bit width: 48
[ 0.171636] ... generic registers: 4
[ 0.171708] ... value mask: 0000ffffffffffff
[ 0.171785] ... max period: 000000007fffffff
[ 0.171862] ... fixed-purpose events: 3
[ 0.171935] ... event mask: 000000070000000f
[ 0.172158] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.172351] Booting Node 0, Processors #1 Ok.
[ 0.183421] CPU1: Thermal monitoring handled by SMI
[ 0.185533] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.185656] Brought up 2 CPUs
[ 0.185729] Total of 2 processors activated (8512.24 BogoMIPS).
[ 0.187031] devtmpfs: initialized
[ 0.191230] PM: Registering ACPI NVS region [mem 0x77470000-0x774f0fff] (528384 bytes)
[ 0.191358] PM: Registering ACPI NVS region [mem 0x7775e000-0x7779efff] (266240 bytes)
[ 0.191569] dummy:
[ 0.191699] NET: Registered protocol family 16
[ 0.191896] ACPI: bus type pci registered
[ 0.192052] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.192160] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.237598] PCI: Using configuration type 1 for base access
[ 0.238298] bio: create slab <bio-0> at 0
[ 0.238461] ACPI: Added _OSI(Module Device)
[ 0.238536] ACPI: Added _OSI(Processor Device)
[ 0.238610] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.238689] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.240307] ACPI: EC: Look up EC in DSDT
[ 0.248392] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.248948] ACPI: SSDT 000000007771ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.249514] ACPI: Dynamic OEM Table Load:
[ 0.249675] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.250047] ACPI: SSDT 0000000077718018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.253055] ACPI: Dynamic OEM Table Load:
[ 0.253213] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.253763] ACPI: SSDT 0000000077719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.254392] ACPI: Dynamic OEM Table Load:
[ 0.254551] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.254907] ACPI: SSDT 0000000077717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.255483] ACPI: Dynamic OEM Table Load:
[ 0.255643] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.264844] ACPI: Interpreter enabled
[ 0.264922] ACPI: (supports S0 S3 S4 S5)
[ 0.265189] ACPI: Using IOAPIC for interrupt routing
[ 0.277136] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.277422] ACPI: No dock devices found.
[ 0.277506] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.278094] \_SB_.PCI0:_OSC invalid UUID
[ 0.278096] _OSC request data:1 8 1f
[ 0.278101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.278929] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.279015] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.279100] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.279205] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.279314] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.279418] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.279524] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
[ 0.279663] PCI host bridge to bus 0000:00
[ 0.279739] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.279821] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.279902] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.279987] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.280070] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.280153] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.280235] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[ 0.280329] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.280348] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.280474] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.280508] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.280523] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.280535] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.280542] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.280547] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.280624] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.280650] pci 0000:00:1a.0: reg 10: [mem 0xf0806000-0xf08063ff]
[ 0.280762] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.280798] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.280820] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.280920] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.280952] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.281055] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.281088] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.281191] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.281227] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.281330] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.281373] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.281399] pci 0000:00:1d.0: reg 10: [mem 0xf0806400-0xf08067ff]
[ 0.281516] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.281545] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.281635] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.281771] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.281799] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.281810] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.281822] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.281833] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.281845] pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f]
[ 0.281857] pci 0000:00:1f.2: reg 24: [mem 0xf0805000-0xf08057ff]
[ 0.281925] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.281951] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.281973] pci 0000:00:1f.3: reg 10: [mem 0xf0806800-0xf08068ff 64bit]
[ 0.282004] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.282056] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.282084] pci 0000:00:1f.6: reg 10: [mem 0xf0804000-0xf0804fff 64bit]
[ 0.282234] pci 0000:01:00.0: [10de:0a70] type 00 class 0x030000
[ 0.282250] pci 0000:01:00.0: reg 10: [mem 0xac000000-0xacffffff]
[ 0.282266] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.282283] pci 0000:01:00.0: reg 1c: [mem 0xae000000-0xafffffff 64bit pref]
[ 0.282295] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.282307] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.282412] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.282492] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.282495] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.282499] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.282557] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.282742] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.282785] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.282986] pci 0000:03:00.0: supports D1
[ 0.282988] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.283071] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.283155] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.283241] pci 0000:08:00.0: [1969:2060] type 00 class 0x020000
[ 0.283271] pci 0000:08:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
[ 0.283286] pci 0000:08:00.0: reg 18: [io 0x3000-0x307f]
[ 0.283412] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.293490] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.293584] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.293589] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.293670] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.293768] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.293771] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.293773] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.293776] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.293780] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.293782] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.293785] pci 0000:00:1e.0: bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[ 0.293815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.294083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.294161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.294329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.294399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.294474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.294623] \_SB_.PCI0:_OSC invalid UUID
[ 0.294624] _OSC request data:1 1f 1f
[ 0.294629] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.294750] \_SB_.PCI0:_OSC invalid UUID
[ 0.294751] _OSC request data:1 0 1d
[ 0.294755] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.294863] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.301152] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.301305] PCI host bridge to bus 0000:ff
[ 0.301384] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.301406] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.301431] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.301450] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.301474] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.301493] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.301528] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.301608] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.301717] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.302044] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.302677] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.303376] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.304008] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.304639] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.305380] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.306124] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.306817] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.307497] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.307613] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.307721] vgaarb: loaded
[ 0.307792] vgaarb: bridge control possible 0000:01:00.0
[ 0.307869] vgaarb: no bridge control possible 0000:00:02.0
[ 0.307976] PCI: Using ACPI for IRQ routing
[ 0.317983] PCI: pci_cache_line_size set to 64 bytes
[ 0.318080] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 0.318082] reserve RAM buffer: 000000007727c000 - 0000000077ffffff
[ 0.318088] reserve RAM buffer: 00000000773ee000 - 0000000077ffffff
[ 0.318093] reserve RAM buffer: 000000007746f000 - 0000000077ffffff
[ 0.318097] reserve RAM buffer: 0000000077717000 - 0000000077ffffff
[ 0.318101] reserve RAM buffer: 000000007775e000 - 0000000077ffffff
[ 0.318104] reserve RAM buffer: 00000000777e1000 - 0000000077ffffff
[ 0.318106] reserve RAM buffer: 0000000077800000 - 0000000077ffffff
[ 0.318245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.318706] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.320805] Switching to clocksource hpet
[ 0.322696] pnp: PnP ACPI init
[ 0.322787] ACPI: bus type pnp registered
[ 0.323267] pnp 00:00: [bus 00-fe]
[ 0.323270] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.323273] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.323275] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.323277] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.323279] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.323282] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.323284] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.323286] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.323288] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.323290] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.323292] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.323294] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.323296] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.323298] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.323301] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.323303] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.323305] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.323307] pnp 00:00: [mem 0x7c000000-0xfeafffff window]
[ 0.323309] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.323366] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.323474] pnp 00:01: [io 0x0000-0x001f]
[ 0.323477] pnp 00:01: [io 0x0081-0x0091]
[ 0.323478] pnp 00:01: [io 0x0093-0x009f]
[ 0.323480] pnp 00:01: [io 0x00c0-0x00df]
[ 0.323482] pnp 00:01: [dma 4]
[ 0.323517] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.323527] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.323561] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.323649] pnp 00:03: [irq 0 disabled]
[ 0.323662] pnp 00:03: [irq 8]
[ 0.323665] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.323701] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.323712] pnp 00:04: [io 0x00f0]
[ 0.323718] pnp 00:04: [irq 13]
[ 0.323753] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.323767] pnp 00:05: [io 0x002e-0x002f]
[ 0.323769] pnp 00:05: [io 0x004e-0x004f]
[ 0.323771] pnp 00:05: [io 0x0061]
[ 0.323773] pnp 00:05: [io 0x0063]
[ 0.323774] pnp 00:05: [io 0x0065]
[ 0.323776] pnp 00:05: [io 0x0067]
[ 0.323778] pnp 00:05: [io 0x0070]
[ 0.323780] pnp 00:05: [io 0x0080]
[ 0.323781] pnp 00:05: [io 0x0092]
[ 0.323783] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.323785] pnp 00:05: [io 0x0680-0x069f]
[ 0.323787] pnp 00:05: [io 0x0500-0x050f]
[ 0.323789] pnp 00:05: [io 0x0600-0x0603]
[ 0.323790] pnp 00:05: [io 0xffff]
[ 0.323792] pnp 00:05: [io 0x0400-0x047f]
[ 0.323794] pnp 00:05: [io 0x1180-0x11ff]
[ 0.323796] pnp 00:05: [io 0x164e-0x164f]
[ 0.323797] pnp 00:05: [io 0xfe00]
[ 0.323799] pnp 00:05: [io 0x0068]
[ 0.323801] pnp 00:05: [io 0x006c]
[ 0.323803] pnp 00:05: [io 0x0700-0x070f]
[ 0.323867] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.323953] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.324035] system 00:05: [io 0x0600-0x0603] has been reserved
[ 0.324114] system 00:05: [io 0xffff] has been reserved
[ 0.324192] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.324273] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.324352] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.324434] system 00:05: [io 0xfe00] has been reserved
[ 0.324513] system 00:05: [io 0x0700-0x070f] has been reserved
[ 0.324593] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.324630] pnp 00:06: [io 0x06a0-0x06af]
[ 0.324632] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.324685] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.324766] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.324846] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.324899] pnp 00:07: [io 0x0070-0x0077]
[ 0.324937] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.324968] pnp 00:08: [io 0x0060]
[ 0.324970] pnp 00:08: [io 0x0064]
[ 0.324976] pnp 00:08: [irq 1]
[ 0.325013] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.325027] pnp 00:09: [irq 12]
[ 0.325063] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.325364] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.325367] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 0.325369] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.325371] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.325373] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.325376] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.325378] pnp 00:0a: [mem 0xfeaff000-0xfeafffff]
[ 0.325380] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.325382] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.325384] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.325386] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.325388] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.325390] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.325453] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.325535] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.325618] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.325701] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.325784] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.325868] system 00:0a: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.325950] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.326036] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.326117] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.326199] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.326285] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.326370] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.326556] pnp 00:0b: [bus ff]
[ 0.326600] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.326970] pnp: PnP ACPI: found 12 devices
[ 0.327048] ACPI: ACPI bus type pnp unregistered
[ 0.334127] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.334132] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.334136] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
[ 0.334148] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03-03] add_size 1000
[ 0.334152] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.334164] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-08] add_size 200000
[ 0.334183] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.334186] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.334189] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.334192] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.334195] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.334197] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.334203] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7c000000-0x7c1fffff]
[ 0.334292] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.334401] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.334507] pci 0000:00:1c.4: BAR 15: assigned [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.334614] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.334695] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.334781] pci 0000:01:00.0: BAR 6: assigned [mem 0xad000000-0xad07ffff pref]
[ 0.334884] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.334961] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.335042] pci 0000:00:01.0: bridge window [mem 0xac000000-0xadefffff]
[ 0.335127] pci 0000:00:01.0: bridge window [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.335234] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.335312] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.335398] pci 0000:00:1c.0: bridge window [mem 0x7c000000-0x7c1fffff]
[ 0.335484] pci 0000:00:1c.0: bridge window [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.335594] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.335671] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.335759] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.335844] pci 0000:00:1c.1: bridge window [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.335955] pci 0000:00:1c.4: PCI bridge to [bus 08-08]
[ 0.336034] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.336122] pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.336207] pci 0000:00:1c.4: bridge window [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.336318] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.336446] pci 0000:00:1e.0: setting latency timer to 64
[ 0.336451] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.336453] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.336456] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.336458] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.336460] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.336462] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.336465] pci_bus 0000:00: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.336467] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.336469] pci_bus 0000:01: resource 1 [mem 0xac000000-0xadefffff]
[ 0.336472] pci_bus 0000:01: resource 2 [mem 0xae000000-0xbfffffff 64bit pref]
[ 0.336474] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.336476] pci_bus 0000:02: resource 1 [mem 0x7c000000-0x7c1fffff]
[ 0.336478] pci_bus 0000:02: resource 2 [mem 0x7c200000-0x7c3fffff 64bit pref]
[ 0.336481] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.336483] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.336485] pci_bus 0000:03: resource 2 [mem 0x7c400000-0x7c5fffff 64bit pref]
[ 0.336488] pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
[ 0.336490] pci_bus 0000:08: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.336492] pci_bus 0000:08: resource 2 [mem 0x7c600000-0x7c7fffff 64bit pref]
[ 0.336495] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.336497] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.336500] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.336502] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.336504] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.336506] pci_bus 0000:0a: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.336509] pci_bus 0000:0a: resource 10 [mem 0x7c000000-0xfeafffff]
[ 0.336576] NET: Registered protocol family 2
[ 0.336745] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.337318] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.338700] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.339107] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.339189] TCP: reno registered
[ 0.339269] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.339360] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.339563] NET: Registered protocol family 1
[ 0.339660] pci 0000:00:02.0: Boot video device
[ 0.339817] PCI: CLS 64 bytes, default 64
[ 0.339870] Unpacking initramfs...
[ 3.244045] Freeing initrd memory: 120896k freed
[ 3.271756] Simple Boot Flag at 0x36 set to 0x1
[ 3.272292] audit: initializing netlink socket (disabled)
[ 3.272382] type=2000 audit(1341659157.156:1): initialized
[ 3.286674] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.287241] VFS: Disk quotas dquot_6.5.2
[ 3.287337] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.287493] msgmni has been set to 3743
[ 3.287737] alg: No test for stdrng (krng)
[ 3.287835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.287953] io scheduler noop registered
[ 3.288025] io scheduler deadline registered
[ 3.288113] io scheduler cfq registered (default)
[ 3.288304] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.288523] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.288620] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.288704] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.289204] intel_idle: MWAIT substates: 0x120
[ 3.289206] intel_idle: v0.4 model 0x25
[ 3.289208] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.289247] GHES: HEST is not enabled!
[ 3.289377] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.289939] Linux agpgart interface v0.103
[ 3.290082] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 3.290279] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 3.291216] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 3.291441] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.291664] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.296342] i8042: Detected active multiplexing controller, rev 1.1
[ 3.298322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.300899] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.301004] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.301103] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.301202] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.301390] mousedev: PS/2 mouse device common for all mice
[ 3.301522] rtc_cmos 00:07: RTC can wake from S4
[ 3.301739] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.301850] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.301973] cpuidle: using governor ladder
[ 3.302086] cpuidle: using governor menu
[ 3.302281] TCP: cubic registered
[ 3.302437] NET: Registered protocol family 10
[ 3.302777] Mobile IPv6
[ 3.302846] NET: Registered protocol family 17
[ 3.302923] Registering the dns_resolver key type
[ 3.303291] PM: Hibernation image not present or could not be loaded.
[ 3.303305] registered taskstats version 1
[ 3.304017] rtc_cmos 00:07: setting system clock to 2012-07-07 11:05:58 UTC (1341659158)
[ 3.304335] Initializing network drop monitor service
[ 3.317425] Freeing unused kernel memory: 604k freed
[ 3.317609] Write protecting the kernel read-only data: 6144k
[ 3.319627] Freeing unused kernel memory: 496k freed
[ 3.322428] Freeing unused kernel memory: 720k freed
[ 3.348987] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.454092] udev[54]: starting version 164
[ 3.498037] SCSI subsystem initialized
[ 3.513101] usbcore: registered new interface driver usbfs
[ 3.513208] usbcore: registered new interface driver hub
[ 3.513391] usbcore: registered new device driver usb
[ 3.514374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.514507] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.514511] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 3.514617] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.514755] ehci_hcd 0000:00:1a.0: debug port 2
[ 3.518814] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 3.519829] libata version 3.00 loaded.
[ 3.538765] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0806000
[ 3.539143] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.539236] ACPI: Thermal Zone [TZ00] (59 C)
[ 3.547581] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.547704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.547815] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.547919] usb usb1: Product: EHCI Host Controller
[ 3.547999] usb usb1: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.548083] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.548431] hub 1-0:1.0: USB hub found
[ 3.548511] hub 1-0:1.0: 3 ports detected
[ 3.548671] ahci 0000:00:1f.2: version 3.0
[ 3.548748] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.548793] ahci: SSS flag set, parallel bus scan disabled
[ 3.548915] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[ 3.549023] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 3.549135] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.564193] scsi0 : ahci
[ 3.564464] scsi1 : ahci
[ 3.564730] scsi2 : ahci
[ 3.564987] scsi3 : ahci
[ 3.565242] scsi4 : ahci
[ 3.565469] scsi5 : ahci
[ 3.565665] ata1: DUMMY
[ 3.565747] ata2: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805180 irq 41
[ 3.565865] ata3: DUMMY
[ 3.565943] ata4: DUMMY
[ 3.566024] ata5: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805300 irq 41
[ 3.566144] ata6: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805380 irq 41
[ 3.566390] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.566397] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.566517] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.566694] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.570790] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.570817] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0806400
[ 3.579577] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.579701] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.579797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.579914] usb usb2: Product: EHCI Host Controller
[ 3.580001] usb usb2: Manufacturer: Linux 3.4.4debugpsmouse ehci_hcd
[ 3.580093] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.580449] hub 2-0:1.0: USB hub found
[ 3.580543] hub 2-0:1.0: 3 ports detected
[ 3.624021] atl1c 0000:08:00.0: version 1.0.1.0-NAPI
[ 3.859462] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.883462] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.937627] ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ205E, max UDMA/100
[ 3.937722] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.938762] ata2.00: configured for UDMA/100
[ 3.939209] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ20 PQ: 0 ANSI: 5
[ 3.991745] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.991837] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.992316] hub 1-1:1.0: USB hub found
[ 3.992491] hub 1-1:1.0: 6 ports detected
[ 4.103364] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 4.235651] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 4.235742] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.236219] hub 2-1:1.0: USB hub found
[ 4.236351] hub 2-1:1.0: 8 ports detected
[ 4.259304] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.262370] ata5.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 4.263676] ata5.00: configured for UDMA/100
[ 4.271302] Refined TSC clocksource calibration: 2127.999 MHz.
[ 4.271336] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 4.271496] Switching to clocksource tsc
[ 4.307376] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[ 4.403072] usb 1-1.1: New USB device found, idVendor=15d9, idProduct=0a4f
[ 4.403175] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.403282] usb 1-1.1: Product: USB OPTICAL MOUSE
[ 4.507287] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[ 4.591157] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.597687] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.597827] sd 1:0:0:0: [sda] Write Protect is off
[ 4.597901] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.597917] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.602749] usb 2-1.2: New USB device found, idVendor=0079, idProduct=0011
[ 4.602845] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.602957] usb 2-1.2: Product: USB Gamepad
[ 4.611154] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
[ 4.611543] generic-usb 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.1/input0
[ 4.611785] usbcore: registered new interface driver usbhid
[ 4.611870] usbhid: USB HID core driver
[ 4.675207] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd
[ 4.726642] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[ 4.728414] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.736609] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.736727] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.737040] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.740245] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.740360] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 4.782046] usb 2-1.4: New USB device found, idVendor=5986, idProduct=0294
[ 4.782140] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.782246] usb 2-1.4: Product: Lenovo EasyCamera
[ 4.782320] usb 2-1.4: Manufacturer: Bison Corp.
[ 5.543938] nbd: registered device at major 43
[ 5.559928] device-mapper: uevent: version 1.0.3
[ 5.560252] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.711851] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 17.536963] udev[369]: starting version 164
[ 17.843837] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 17.844431] ACPI: Lid Switch [LID]
[ 17.844563] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 17.844673] ACPI: Power Button [PWRB]
[ 17.844833] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 17.844936] ACPI: Sleep Button [SLPB]
[ 17.845145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 17.845556] ACPI: Power Button [PWRF]
[ 18.079584] intel ips 0000:00:1f.6: No CPUID match found.
[ 18.079665] intel ips 0000:00:1f.6: IPS not supported on this CPU
[ 18.126195] ACPI: Requesting acpi_cpufreq
[ 18.163997] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 18.186631] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 18.192903] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 18.276187] input: USB Gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
[ 18.276396] dragonrise 0003:0079:0011.0002: input,hidraw1: USB HID v1.10 Joystick [USB Gamepad ] on usb-0000:00:1d.0-1.2/input0
[ 18.448477] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 18.535547] ACPI: AC Adapter [ACAD] (on-line)
[ 18.902340] cfg80211: Calling CRDA to update world regulatory domain
[ 19.495754] psmouse serio4: alps: E6 report: 00 00 64
[ 19.521210] psmouse serio4: alps: E7 report: 73 03 50
[ 19.619902] ACPI: Battery Slot [BAT1] (battery present)
[ 19.622671] wmi: Mapper loaded
[ 19.765567] input: Ideapad extra buttons as /devices/platform/ideapad/input/input8
[ 19.934146] Linux media interface: v0.10
[ 19.935069] psmouse serio4: alps: E6 report: 00 00 64
[ 19.960457] psmouse serio4: alps: E7 report: 73 03 50
[ 20.000732] psmouse serio4: alps: Status: 10 00 0a
[ 20.026497] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input9
[ 20.042797] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input10
[ 20.059219] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 20.059430] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.128642] Linux video capture interface: v2.00
[ 20.593510] [drm] Initialized drm 1.1.0 20060810
[ 20.719237] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0294)
[ 20.721643] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input11
[ 20.721840] usbcore: registered new interface driver uvcvideo
[ 20.721916] USB Video Class driver (1.1.1)
[ 21.159986] i915 0000:00:02.0: setting latency timer to 64
[ 21.214361] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 21.214373] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 21.214459] [drm] Driver supports precise vblank timestamp query.
[ 21.214618] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 21.214726] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.214838] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 21.627715] fbcon: inteldrmfb (fb0) is primary device
[ 21.752240] ath: EEPROM regdomain: 0x65
[ 21.752244] ath: EEPROM indicates we should expect a direct regpair map
[ 21.752250] ath: Country alpha2 being used: 00
[ 21.752253] ath: Regpair used: 0x65
[ 21.778755] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 21.779204] Registered led device: ath9k-phy0
[ 21.779216] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010920000, irq=17
[ 21.875313] Console: switching to colour frame buffer device 170x48
[ 21.882817] fb0: inteldrmfb frame buffer device
[ 21.882820] drm: registered panic notifier
[ 21.883109] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120320/video-1147)
[ 21.883164] video: probe of LNXVIDEO:00 failed with error 5
[ 21.885789] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[ 21.885970] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 21.886100] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 21.886247] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 21.960568] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
[ 21.964914] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 21.965033] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 22.123821] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 22.166595] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 22.641608] loop: module loaded
[ 23.759344] fuse init (API version 7.18)
[ 24.781223] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.360823] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input16
[ 26.317349] Clocksource tsc unstable (delta = -555400892 ns)
[ 27.338689] atl1c 0000:08:00.0: irq 44 for MSI/MSI-X
[ 27.338709] Switching to clocksource hpet
[ 28.700870] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.397841] sshd (1952): /proc/1952/oom_adj is deprecated, please use /proc/1952/oom_score_adj instead.
[ 53.614877] wlan0: authenticate with ec:17:2f:2f:e9:b6
[ 53.628120] wlan0: send auth to ec:17:2f:2f:e9:b6 (try 1/3)
[ 53.630538] wlan0: authenticated
[ 53.638363] wlan0: associate with ec:17:2f:2f:e9:b6 (try 1/3)
[ 53.644330] wlan0: RX AssocResp from ec:17:2f:2f:e9:b6 (capab=0x431 status=0 aid=1)
[ 53.644339] wlan0: associated
[ 53.651270] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[-- Attachment #7: V2-00-inputdevices.txt --]
[-- Type: text/plain, Size: 4257 bytes --]
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=15d9 Product=0a4f Version=0111
N: Name=" USB OPTICAL MOUSE"
P: Phys=usb-0000:00:1a.0-1.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2
B: PROP=0
B: EV=21
B: SW=1
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
U: Uniq=
H: Handlers=kbd event4
B: PROP=0
B: EV=3
B: KEY=4000 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: PROP=0
B: EV=3
B: KEY=10000000000000 0
I: Bus=0003 Vendor=0079 Product=0011 Version=0110
N: Name="USB Gamepad "
P: Phys=usb-0000:00:1d.0-1.2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
U: Uniq=
H: Handlers=event6 js0
B: PROP=0
B: EV=1b
B: KEY=3ff00000000 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input7
U: Uniq=
H: Handlers=kbd event7
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/platform/ideapad/input/input8
U: Uniq=
H: Handlers=kbd rfkill event8
B: PROP=0
B: EV=13
B: KEY=1400800000000 300000 0 0
B: MSC=10
I: Bus=0011 Vendor=0002 Product=0008 Version=0000
N: Name="PS/2 Mouse"
P: Phys=isa0060/serio4/input1
S: Sysfs=/devices/platform/i8042/serio4/input/input9
U: Uniq=
H: Handlers=mouse1 event9
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=3
I: Bus=0011 Vendor=0002 Product=0008 Version=7335
N: Name="AlpsPS/2 ALPS GlidePoint"
P: Phys=isa0060/serio4/input0
S: Sysfs=/devices/platform/i8042/serio4/input/input10
U: Uniq=
H: Handlers=mouse2 event10
B: PROP=0
B: EV=b
B: KEY=420 70000 0 0 0 0
B: ABS=1000003
I: Bus=0003 Vendor=5986 Product=0294 Version=1403
N: Name="Lenovo EasyCamera"
P: Phys=usb-0000:00:1d.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input11
U: Uniq=
H: Handlers=kbd event11
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
I: Bus=0001 Vendor=10ec Product=0272 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=40001
B: SND=6
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
U: Uniq=
H: Handlers=event14
B: PROP=0
B: EV=21
B: SW=10
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
U: Uniq=
H: Handlers=event15
B: PROP=0
B: EV=21
B: SW=4
I: Bus=0003 Vendor=0000 Product=0000 Version=0004
N: Name="ACPI Virtual Keyboard Device"
P: Phys=
S: Sysfs=/devices/virtual/input/input16
U: Uniq=
H: Handlers=sysrq kbd rfkill event16
B: PROP=0
B: EV=3
B: KEY=ffffffffffffffff ffffffffffffffff ffffffffffffffff fffffffffffffffe
[-- Attachment #8: V2-00-xinputlist.txt --]
[-- Type: text/plain, Size: 4699 bytes --]
⎡ Virtual core pointer id=2 [master pointer (3)]
Reporting 3 classes:
Class originated from: 14
Buttons supported: 12
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None None None
Button state:
Class originated from: 14
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 14
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 4
Buttons supported: 10
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None
Button state:
Class originated from: 4
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 4
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
⎜ ↳ USB OPTICAL MOUSE id=10 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 10
Buttons supported: 7
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right
Button state:
Class originated from: 10
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 10
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎜ ↳ AlpsPS/2 ALPS GlidePoint id=13 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 13
Buttons supported: 12
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down Button Horiz Wheel Left Button Horiz Wheel Right None None None None None
Button state:
Class originated from: 13
Detail for Valuator 0:
Label: Rel X
Range: 0.000000 - 1023.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 13
Detail for Valuator 1:
Label: Rel Y
Range: 0.000000 - 767.000000
Resolution: 0 units/m
Mode: relative
⎜ ↳ PS/2 Mouse id=14 [slave pointer (2)]
Reporting 3 classes:
Class originated from: 14
Buttons supported: 5
Button labels: Button Left Button Middle Button Right Button Wheel Up Button Wheel Down
Button state:
Class originated from: 14
Detail for Valuator 0:
Label: Rel X
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
Class originated from: 14
Detail for Valuator 1:
Label: Rel Y
Range: -1.000000 - -1.000000
Resolution: 1 units/m
Mode: relative
⎣ Virtual core keyboard id=3 [master keyboard (2)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 5
Keycodes supported: 248
↳ Power Button id=6 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 6
Keycodes supported: 248
↳ Video Bus id=7 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 7
Keycodes supported: 248
↳ Power Button id=8 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 8
Keycodes supported: 248
↳ Sleep Button id=9 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 9
Keycodes supported: 248
↳ Lenovo EasyCamera id=11 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 11
Keycodes supported: 248
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 12
Keycodes supported: 248
↳ Ideapad extra buttons id=15 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 15
Keycodes supported: 248
↳ ACPI Virtual Keyboard Device id=16 [slave keyboard (3)]
Reporting 1 classes:
Class originated from: 16
Keycodes supported: 248
[-- Attachment #9: V2-00-Xorg.0.log --]
[-- Type: application/octet-stream, Size: 33617 bytes --]
[ 29.855]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 29.856] X Protocol Version 11, Revision 0
[ 29.856] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
[ 29.856] Current Operating System: Linux ldebian 3.4.4debugpsmouse #1 SMP Fri Jul 6 07:44:49 CST 2012 x86_64
[ 29.856] Kernel command line: root=/dev/sda7 acpi_backlight=vendor ro
[ 29.856] Build Date: 28 August 2011 09:39:43PM
[ 29.856] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <kibi@debian.org>)
[ 29.856] Current version of pixman: 0.24.0
[ 29.856] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 29.856] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 29.856] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 7 11:06:25 2012
[ 29.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 29.897] (==) No Layout section. Using the first Screen section.
[ 29.897] (==) No screen section available. Using defaults.
[ 29.901] (**) |-->Screen "Default Screen Section" (0)
[ 29.901] (**) | |-->Monitor "<default monitor>"
[ 29.901] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 29.901] (==) Automatically adding devices
[ 29.901] (==) Automatically enabling devices
[ 29.901] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 29.901] Entry deleted from font path.
[ 29.901] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 29.901] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 29.901] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 29.901] (II) Loader magic: 0x7d3ae0
[ 29.901] (II) Module ABI versions:
[ 29.901] X.Org ANSI C Emulation: 0.4
[ 29.901] X.Org Video Driver: 10.0
[ 29.901] X.Org XInput driver : 12.2
[ 29.901] X.Org Server Extension : 5.0
[ 29.902] (--) PCI:*(0:0:2:0) 8086:0046:17aa:3920 rev 24, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 29.902] (--) PCI: (0:1:0:0) 10de:0a70:17aa:3968 rev 162, Mem @ 0xac000000/16777216, 0xb0000000/268435456, 0xae000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 29.902] (II) Open ACPI successful (/var/run/acpid.socket)
[ 29.902] (II) LoadModule: "extmod"
[ 29.960] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 29.960] (II) Module extmod: vendor="X.Org Foundation"
[ 29.960] compiled for 1.10.4, module version = 1.0.0
[ 29.960] Module class: X.Org Server Extension
[ 29.960] ABI class: X.Org Server Extension, version 5.0
[ 29.960] (II) Loading extension SELinux
[ 29.960] (II) Loading extension MIT-SCREEN-SAVER
[ 29.960] (II) Loading extension XFree86-VidModeExtension
[ 29.960] (II) Loading extension XFree86-DGA
[ 29.961] (II) Loading extension DPMS
[ 29.961] (II) Loading extension XVideo
[ 29.961] (II) Loading extension XVideo-MotionCompensation
[ 29.961] (II) Loading extension X-Resource
[ 29.961] (II) LoadModule: "dbe"
[ 29.961] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 29.961] (II) Module dbe: vendor="X.Org Foundation"
[ 29.961] compiled for 1.10.4, module version = 1.0.0
[ 29.961] Module class: X.Org Server Extension
[ 29.961] ABI class: X.Org Server Extension, version 5.0
[ 29.961] (II) Loading extension DOUBLE-BUFFER
[ 29.961] (II) LoadModule: "glx"
[ 29.961] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.961] (II) Module glx: vendor="X.Org Foundation"
[ 29.961] compiled for 1.10.4, module version = 1.0.0
[ 29.961] ABI class: X.Org Server Extension, version 5.0
[ 29.961] (==) AIGLX enabled
[ 29.961] (II) Loading extension GLX
[ 29.961] (II) LoadModule: "record"
[ 29.961] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.961] (II) Module record: vendor="X.Org Foundation"
[ 29.961] compiled for 1.10.4, module version = 1.13.0
[ 29.961] Module class: X.Org Server Extension
[ 29.961] ABI class: X.Org Server Extension, version 5.0
[ 29.961] (II) Loading extension RECORD
[ 29.961] (II) LoadModule: "dri"
[ 29.961] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.962] (II) Module dri: vendor="X.Org Foundation"
[ 29.962] compiled for 1.10.4, module version = 1.0.0
[ 29.962] ABI class: X.Org Server Extension, version 5.0
[ 29.962] (II) Loading extension XFree86-DRI
[ 29.962] (II) LoadModule: "dri2"
[ 29.962] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.962] (II) Module dri2: vendor="X.Org Foundation"
[ 29.962] compiled for 1.10.4, module version = 1.2.0
[ 29.962] ABI class: X.Org Server Extension, version 5.0
[ 29.962] (II) Loading extension DRI2
[ 29.962] (==) Matched intel as autoconfigured driver 0
[ 29.962] (==) Matched vesa as autoconfigured driver 1
[ 29.962] (==) Matched fbdev as autoconfigured driver 2
[ 29.962] (==) Assigned the driver to the xf86ConfigLayout
[ 29.962] (II) LoadModule: "intel"
[ 29.962] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.962] (II) Module intel: vendor="X.Org Foundation"
[ 29.962] compiled for 1.10.4, module version = 2.15.0
[ 29.962] Module class: X.Org Video Driver
[ 29.962] ABI class: X.Org Video Driver, version 10.0
[ 29.962] (II) LoadModule: "vesa"
[ 29.962] (WW) Warning, couldn't open module vesa
[ 29.962] (II) UnloadModule: "vesa"
[ 29.962] (II) Unloading vesa
[ 29.963] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 29.963] (II) LoadModule: "fbdev"
[ 29.963] (WW) Warning, couldn't open module fbdev
[ 29.963] (II) UnloadModule: "fbdev"
[ 29.963] (II) Unloading fbdev
[ 29.963] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 29.963] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 29.963] (++) using VT number 7
[ 29.969] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 29.969] drmOpenDevice: node name is /dev/dri/card0
[ 29.969] drmOpenDevice: open result is 9, (OK)
[ 29.969] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 29.969] drmOpenDevice: node name is /dev/dri/card0
[ 29.969] drmOpenDevice: open result is 9, (OK)
[ 29.969] drmOpenByBusid: drmOpenMinor returns 9
[ 29.969] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 29.969] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 29.969] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 29.969] (==) intel(0): RGB weight 888
[ 29.969] (==) intel(0): Default visual is TrueColor
[ 29.969] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 29.969] (--) intel(0): Chipset: "Arrandale"
[ 29.969] (**) intel(0): Relaxed fencing enabled
[ 29.969] (**) intel(0): Framebuffer tiled
[ 29.969] (**) intel(0): Pixmaps tiled
[ 29.969] (**) intel(0): 3D buffers tiled
[ 29.969] (**) intel(0): SwapBuffers wait enabled
[ 29.969] (==) intel(0): video overlay key set to 0x101fe
[ 29.969] (II) intel(0): Output LVDS1 has no monitor section
[ 29.969] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[ 29.969] (II) intel(0): Output VGA1 has no monitor section
[ 29.969] (II) intel(0): EDID for output LVDS1
[ 29.969] (II) intel(0): Manufacturer: AUO Model: 402c Serial#: 0
[ 29.970] (II) intel(0): Year: 2010 Week: 0
[ 29.970] (II) intel(0): EDID Version: 1.3
[ 29.970] (II) intel(0): Digital Display Input
[ 29.970] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 29.970] (II) intel(0): Gamma: 2.20
[ 29.970] (II) intel(0): No DPMS capabilities specified
[ 29.970] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 29.970] (II) intel(0): First detailed timing is preferred mode
[ 29.970] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.325 greenY: 0.540
[ 29.970] (II) intel(0): blueX: 0.150 blueY: 0.145 whiteX: 0.313 whiteY: 0.329
[ 29.970] (II) intel(0): Manufacturer's mask: 0
[ 29.970] (II) intel(0): Supported detailed timing:
[ 29.970] (II) intel(0): clock: 69.3 MHz Image Size: 293 x 164 mm
[ 29.970] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1456 h_border: 0
[ 29.970] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 29.970] (II) intel(0): Unknown vendor-specific block f
[ 29.970] (II) intel(0): AUO
[ 29.970] (II) intel(0): B133XW04 V0
[ 29.970] (II) intel(0): EDID (in hex):
[ 29.970] (II) intel(0): 00ffffffffffff0006af2c4000000000
[ 29.970] (II) intel(0): 00140103801d10780a15859758538a26
[ 29.970] (II) intel(0): 25505400000001010101010101010101
[ 29.970] (II) intel(0): 010101010101121b565a500019303020
[ 29.970] (II) intel(0): 360025a4100000180000000f00000000
[ 29.970] (II) intel(0): 00000000000000000020000000fe0041
[ 29.970] (II) intel(0): 554f0a202020202020202020000000fe
[ 29.970] (II) intel(0): 004231333358573034205630200a0056
[ 29.970] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 29.970] (II) intel(0): Printing DDC gathered Modelines:
[ 29.970] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 29.970] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 29.970] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 29.970] (II) intel(0): Printing probed modes for output LVDS1
[ 29.970] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 29.970] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 29.970] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 29.970] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 29.970] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 29.970] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 29.970] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 29.970] (II) intel(0): EDID for output VGA1
[ 29.970] (II) intel(0): Output LVDS1 connected
[ 29.970] (II) intel(0): Output VGA1 disconnected
[ 29.970] (II) intel(0): Using exact sizes for initial modes
[ 29.970] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 29.970] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 29.970] (II) intel(0): Kernel page flipping support detected, enabling
[ 29.970] (**) intel(0): Display dimensions: (290, 160) mm
[ 29.970] (**) intel(0): DPI set to (119, 121)
[ 29.970] (II) Loading sub module "fb"
[ 29.970] (II) LoadModule: "fb"
[ 29.971] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.971] (II) Module fb: vendor="X.Org Foundation"
[ 29.971] compiled for 1.10.4, module version = 1.0.0
[ 29.971] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.971] (II) Loading sub module "dri2"
[ 29.971] (II) LoadModule: "dri2"
[ 29.971] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.971] (II) Module dri2: vendor="X.Org Foundation"
[ 29.971] compiled for 1.10.4, module version = 1.2.0
[ 29.971] ABI class: X.Org Server Extension, version 5.0
[ 29.971] (==) Depth 24 pixmap format is 32 bpp
[ 29.971] (II) intel(0): [DRI2] Setup complete
[ 29.971] (II) intel(0): [DRI2] DRI driver: i965
[ 29.971] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 29.978] (II) UXA(0): Driver registered support for the following operations:
[ 29.978] (II) solid
[ 29.978] (II) copy
[ 29.978] (II) composite (RENDER acceleration)
[ 29.979] (II) put_image
[ 29.979] (II) get_image
[ 29.979] (==) intel(0): Backing store disabled
[ 29.979] (==) intel(0): Silken mouse enabled
[ 29.979] (II) intel(0): Initializing HW Cursor
[ 30.040] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 30.040] (==) intel(0): DPMS enabled
[ 30.040] (==) intel(0): Intel XvMC decoder enabled
[ 30.040] (II) intel(0): Set up textured video
[ 30.040] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 30.040] (II) intel(0): direct rendering: DRI2 Enabled
[ 30.040] (==) intel(0): hotplug detection: "enabled"
[ 30.040] (--) RandR disabled
[ 30.040] (II) Initializing built-in extension Generic Event Extension
[ 30.040] (II) Initializing built-in extension SHAPE
[ 30.041] (II) Initializing built-in extension MIT-SHM
[ 30.041] (II) Initializing built-in extension XInputExtension
[ 30.041] (II) Initializing built-in extension XTEST
[ 30.041] (II) Initializing built-in extension BIG-REQUESTS
[ 30.041] (II) Initializing built-in extension SYNC
[ 30.041] (II) Initializing built-in extension XKEYBOARD
[ 30.041] (II) Initializing built-in extension XC-MISC
[ 30.041] (II) Initializing built-in extension SECURITY
[ 30.041] (II) Initializing built-in extension XINERAMA
[ 30.041] (II) Initializing built-in extension XFIXES
[ 30.041] (II) Initializing built-in extension RENDER
[ 30.041] (II) Initializing built-in extension RANDR
[ 30.041] (II) Initializing built-in extension COMPOSITE
[ 30.041] (II) Initializing built-in extension DAMAGE
[ 30.041] (II) SELinux: Disabled on system
[ 30.050] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 30.050] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 30.050] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 30.050] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 30.050] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 30.050] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 30.050] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 30.051] (II) intel(0): Setting screen physical size to 361 x 203
[ 30.144] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 30.144] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.144] (II) LoadModule: "evdev"
[ 30.144] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.144] (II) Module evdev: vendor="X.Org Foundation"
[ 30.144] compiled for 1.10.3, module version = 2.6.0
[ 30.144] Module class: X.Org XInput Driver
[ 30.144] ABI class: X.Org XInput driver, version 12.2
[ 30.144] (II) Using input driver 'evdev' for 'Power Button'
[ 30.144] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.144] (**) Power Button: always reports core events
[ 30.144] (**) Power Button: Device: "/dev/input/event5"
[ 30.144] (--) Power Button: Found keys
[ 30.144] (II) Power Button: Configuring as keyboard
[ 30.144] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 30.144] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.144] (**) Option "xkb_rules" "evdev"
[ 30.144] (**) Option "xkb_model" "pc105"
[ 30.144] (**) Option "xkb_layout" "us"
[ 30.146] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 30.146] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.146] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.146] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.146] (**) Video Bus: always reports core events
[ 30.146] (**) Video Bus: Device: "/dev/input/event12"
[ 30.146] (--) Video Bus: Found keys
[ 30.146] (II) Video Bus: Configuring as keyboard
[ 30.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12/event12"
[ 30.146] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 30.146] (**) Option "xkb_rules" "evdev"
[ 30.146] (**) Option "xkb_model" "pc105"
[ 30.146] (**) Option "xkb_layout" "us"
[ 30.154] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 30.154] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.154] (II) Using input driver 'evdev' for 'Power Button'
[ 30.154] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.154] (**) Power Button: always reports core events
[ 30.154] (**) Power Button: Device: "/dev/input/event3"
[ 30.154] (--) Power Button: Found keys
[ 30.154] (II) Power Button: Configuring as keyboard
[ 30.154] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 30.154] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.154] (**) Option "xkb_rules" "evdev"
[ 30.154] (**) Option "xkb_model" "pc105"
[ 30.154] (**) Option "xkb_layout" "us"
[ 30.154] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 30.155] (II) No input driver/identifier specified (ignoring)
[ 30.155] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 30.155] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 30.155] (II) Using input driver 'evdev' for 'Sleep Button'
[ 30.155] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.155] (**) Sleep Button: always reports core events
[ 30.155] (**) Sleep Button: Device: "/dev/input/event4"
[ 30.155] (--) Sleep Button: Found keys
[ 30.155] (II) Sleep Button: Configuring as keyboard
[ 30.155] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 30.155] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 30.155] (**) Option "xkb_rules" "evdev"
[ 30.155] (**) Option "xkb_model" "pc105"
[ 30.155] (**) Option "xkb_layout" "us"
[ 30.157] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 30.157] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 30.157] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 30.157] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.157] (**) USB OPTICAL MOUSE: always reports core events
[ 30.157] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 30.157] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 30.157] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 30.157] (--) USB OPTICAL MOUSE: Found relative axes
[ 30.157] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 30.157] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 30.157] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 30.157] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 30.157] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.157] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1"
[ 30.157] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE)
[ 30.157] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 30.157] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 30.157] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 30.157] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 30.157] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 30.157] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 30.157] (II) No input driver/identifier specified (ignoring)
[ 30.158] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 30.158] (II) No input driver/identifier specified (ignoring)
[ 30.159] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event14)
[ 30.159] (II) No input driver/identifier specified (ignoring)
[ 30.159] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event15)
[ 30.159] (II) No input driver/identifier specified (ignoring)
[ 30.161] (II) config/udev: Adding input device USB Gamepad (/dev/input/event6)
[ 30.161] (II) No input driver/identifier specified (ignoring)
[ 30.161] (II) config/udev: Adding input device USB Gamepad (/dev/input/js0)
[ 30.161] (II) No input driver/identifier specified (ignoring)
[ 30.161] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event11)
[ 30.161] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 30.161] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 30.161] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.161] (**) Lenovo EasyCamera: always reports core events
[ 30.161] (**) Lenovo EasyCamera: Device: "/dev/input/event11"
[ 30.161] (--) Lenovo EasyCamera: Found keys
[ 30.161] (II) Lenovo EasyCamera: Configuring as keyboard
[ 30.161] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input11/event11"
[ 30.161] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD)
[ 30.161] (**) Option "xkb_rules" "evdev"
[ 30.161] (**) Option "xkb_model" "pc105"
[ 30.161] (**) Option "xkb_layout" "us"
[ 30.165] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.165] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.165] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.165] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.165] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.165] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.165] (--) AT Translated Set 2 keyboard: Found keys
[ 30.165] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.165] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.165] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 30.165] (**) Option "xkb_rules" "evdev"
[ 30.165] (**) Option "xkb_model" "pc105"
[ 30.165] (**) Option "xkb_layout" "us"
[ 30.165] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event10)
[ 30.165] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 30.165] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 30.165] (II) LoadModule: "synaptics"
[ 30.165] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.223] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.223] compiled for 1.10.3, module version = 1.4.1
[ 30.223] Module class: X.Org XInput Driver
[ 30.223] ABI class: X.Org XInput driver, version 12.2
[ 30.223] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 30.223] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.223] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 30.223] (**) Option "Device" "/dev/input/event10"
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 30.223] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 30.223] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 30.224] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[ 30.224] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 30.224] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 30.225] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[ 30.225] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 30.225] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 30.225] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.225] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 30.225] (**) Option "Device" "/dev/input/mouse2"
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: invalid x-axis range. defaulting to 1615 - 5685
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: invalid y-axis range. defaulting to 1729 - 4171
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: invalid pressure range. defaulting to 0 - 256
[ 30.225] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 30.245] (EE) Query no Synaptics: 6003C8
[ 30.245] (--) AlpsPS/2 ALPS GlidePoint: no supported touchpad found
[ 30.245] (EE) AlpsPS/2 ALPS GlidePoint Unable to query/initialize Synaptics hardware.
[ 30.257] (EE) PreInit returned 11 for "AlpsPS/2 ALPS GlidePoint"
[ 30.257] (II) UnloadModule: "synaptics"
[ 30.257] (II) Unloading synaptics
[ 30.257] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event9)
[ 30.257] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 30.257] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 30.257] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.257] (**) PS/2 Mouse: always reports core events
[ 30.257] (**) PS/2 Mouse: Device: "/dev/input/event9"
[ 30.257] (--) PS/2 Mouse: Found 3 mouse buttons
[ 30.257] (--) PS/2 Mouse: Found relative axes
[ 30.257] (--) PS/2 Mouse: Found x and y relative axes
[ 30.257] (II) PS/2 Mouse: Configuring as mouse
[ 30.257] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 30.257] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.257] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event9"
[ 30.257] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 30.258] (II) PS/2 Mouse: initialized for relative axes.
[ 30.258] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 30.258] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 30.258] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 30.258] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 30.258] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[ 30.258] (II) No input driver/identifier specified (ignoring)
[ 30.258] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[ 30.258] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 30.258] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 30.258] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.258] (**) Ideapad extra buttons: always reports core events
[ 30.258] (**) Ideapad extra buttons: Device: "/dev/input/event8"
[ 30.258] (--) Ideapad extra buttons: Found keys
[ 30.258] (II) Ideapad extra buttons: Configuring as keyboard
[ 30.258] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input8/event8"
[ 30.258] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD)
[ 30.258] (**) Option "xkb_rules" "evdev"
[ 30.258] (**) Option "xkb_model" "pc105"
[ 30.258] (**) Option "xkb_layout" "us"
[ 30.259] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 30.259] (II) No input driver/identifier specified (ignoring)
[ 30.262] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event16)
[ 30.262] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 30.262] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 30.262] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.262] (**) ACPI Virtual Keyboard Device: always reports core events
[ 30.262] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event16"
[ 30.262] (--) ACPI Virtual Keyboard Device: Found keys
[ 30.262] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 30.262] (**) Option "config_info" "udev:/sys/devices/virtual/input/input16/event16"
[ 30.262] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 30.262] (**) Option "xkb_rules" "evdev"
[ 30.262] (**) Option "xkb_model" "pc105"
[ 30.262] (**) Option "xkb_layout" "us"
[ 31.285] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.285] (II) intel(0): Printing DDC gathered Modelines:
[ 31.285] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.287] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.287] (II) intel(0): Printing DDC gathered Modelines:
[ 31.287] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 31.308] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 31.308] (II) intel(0): Printing DDC gathered Modelines:
[ 31.308] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.013] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.013] (II) intel(0): Printing DDC gathered Modelines:
[ 48.013] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.015] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.015] (II) intel(0): Printing DDC gathered Modelines:
[ 48.015] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 48.016] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 48.016] (II) intel(0): Printing DDC gathered Modelines:
[ 48.016] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
[ 50.814] (II) intel(0): EDID vendor "AUO", prod id 16428
[ 50.814] (II) intel(0): Printing DDC gathered Modelines:
[ 50.814] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1456 768 771 777 793 -hsync -vsync (47.6 kHz)
next prev parent reply other threads:[~2012-07-07 5:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-06 3:39 Bug#679750: Lenovo G360: ALPS Touchpad Recognized as "PS/2 Generic Mouse"(with newly dmesg information) littlebat
2012-07-06 5:11 ` Seth Forshee
2012-07-07 5:35 ` littlebat [this message]
2012-07-09 14:45 ` Seth Forshee
2012-07-10 4:16 ` littlebat
2012-07-10 4:57 ` Seth Forshee
2012-07-10 6:33 ` Rik Theys
2012-07-15 2:15 ` littlebat
2012-07-19 19:47 ` Seth Forshee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120707133519.25bf82d4.dashing.meng@gmail.com \
--to=dashing.meng@gmail.com \
--cc=679750@bugs.debian.org \
--cc=jrnieder@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=rik.theys@gmail.com \
--cc=seth.forshee@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).