linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>,
	Samuel Ortiz <sameo@linux.intel.com>,
	linux-input@vger.kernel.org, David Dajun Chen <dchen@diasemi.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [Patch v4 7/7] Onkey: DA9055 Onkey driver
Date: Tue, 23 Oct 2012 08:41:51 -0700	[thread overview]
Message-ID: <20121023154151.GA649@core.coreip.homeip.net> (raw)
In-Reply-To: <1350986392.23353.0.camel@dhruva>

On Tue, Oct 23, 2012 at 03:29:52PM +0530, Ashish Jangam wrote:
> Does this patch looks good?

Yes, I just need to pull mainline to get the DA9055 bits (will happen at
3.7-rc3) and I will apply it.

Thanks.

> On Fri, 2012-10-12 at 15:02 +0530, Ashish Jangam wrote:
> > This is the ONKEY driver of the Dialog DA9055 PMIC and depends on the DA9055 MFD
> > core driver.
> > 
> > This patch is functionally tested on SMDK6410 board.
> > 
> > Signed-off-by: David Dajun Chen <dchen@diasemi.com>
> > Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
> > ---
> > changes since v4:
> > - remove of devm_*irq API
> > changes since v3:
> > - used of module_platform_driver macro
> > - add regmap virtual irq function
> > changes since v2:
> > - add support for handling the button release case
> > ---
> >  drivers/input/misc/Kconfig        |   10 ++
> >  drivers/input/misc/Makefile       |    1 +
> >  drivers/input/misc/da9055_onkey.c |  171 +++++++++++++++++++++++++++++++++++++
> >  3 files changed, 182 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/input/misc/da9055_onkey.c
> > 
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index 7c0f1ec..6a45cb8 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -486,6 +486,16 @@ config INPUT_DA9052_ONKEY
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called da9052_onkey.
> >  
> > +config INPUT_DA9055_ONKEY
> > +	tristate "Dialog Semiconductor DA9055 ONKEY"
> > +	depends on MFD_DA9055
> > +	help
> > +	  Support the ONKEY of DA9055 PMICs as an input device
> > +	  reporting power button status.
> > +
> > +	  To compile this driver as a module, choose M here: the module
> > +	  will be called da9055_onkey.
> > +
> >  config INPUT_DM355EVM
> >  	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
> >  	depends on MFD_DM355EVM_MSP
> > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > index 83fe6f5..23347e3 100644
> > --- a/drivers/input/misc/Makefile
> > +++ b/drivers/input/misc/Makefile
> > @@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
> >  obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
> >  obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
> >  obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
> > +obj-$(CONFIG_INPUT_DA9055_ONKEY)	+= da9055_onkey.o
> >  obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
> >  obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
> >  obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)	+= gpio_tilt_polled.o
> > diff --git a/drivers/input/misc/da9055_onkey.c b/drivers/input/misc/da9055_onkey.c
> > new file mode 100644
> > index 0000000..217b5ee
> > --- /dev/null
> > +++ b/drivers/input/misc/da9055_onkey.c
> > @@ -0,0 +1,171 @@
> > +/*
> > + * ON pin driver for Dialog DA9055 PMICs
> > + *
> > + * Copyright(c) 2012 Dialog Semiconductor Ltd.
> > + *
> > + * Author: David Dajun Chen <dchen@diasemi.com>
> > + *
> > + * This program is free software; you can redistribute  it and/or modify it
> > + * under  the terms of  the GNU General  Public License as published by the
> > + * Free Software Foundation;  either version 2 of the  License, or (at your
> > + * option) any later version.
> > + */
> > +
> > +#include <linux/init.h>
> > +#include <linux/input.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include <linux/mfd/da9055/core.h>
> > +#include <linux/mfd/da9055/reg.h>
> > +
> > +struct da9055_onkey {
> > +	struct da9055 *da9055;
> > +	struct input_dev *input;
> > +	struct delayed_work work;
> > +};
> > +
> > +static void da9055_onkey_query(struct da9055_onkey *onkey)
> > +{
> > +	int key_stat;
> > +
> > +	key_stat = da9055_reg_read(onkey->da9055, DA9055_REG_STATUS_A);
> > +	if (key_stat < 0) {
> > +		dev_err(onkey->da9055->dev,
> > +			"Failed to read onkey event %d\n", key_stat);
> > +	} else {
> > +		key_stat &= DA9055_NOKEY_STS;
> > +		/*
> > +		 * Onkey status bit is cleared when onkey button is relased.
> > +		 */
> > +		if (!key_stat) {
> > +			input_report_key(onkey->input, KEY_POWER, 0);
> > +			input_sync(onkey->input);
> > +		}
> > +	}
> > +
> > +	/*
> > +	 * Interrupt is generated only when the ONKEY pin is asserted.
> > +	 * Hence the deassertion of the pin is simulated through work queue.
> > +	 */
> > +	if (key_stat)
> > +		schedule_delayed_work(&onkey->work, msecs_to_jiffies(10));
> > +
> > +}
> > +
> > +static void da9055_onkey_work(struct work_struct *work)
> > +{
> > +	struct da9055_onkey *onkey = container_of(work, struct da9055_onkey,
> > +						  work.work);
> > +
> > +	da9055_onkey_query(onkey);
> > +}
> > +
> > +static irqreturn_t da9055_onkey_irq(int irq, void *data)
> > +{
> > +	struct da9055_onkey *onkey = data;
> > +
> > +	input_report_key(onkey->input, KEY_POWER, 1);
> > +	input_sync(onkey->input);
> > +
> > +	da9055_onkey_query(onkey);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int __devinit da9055_onkey_probe(struct platform_device *pdev)
> > +{
> > +	struct input_dev *input_dev;
> > +	struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
> > +	struct da9055_onkey *onkey;
> > +	int irq, err;
> > +
> > +	irq = platform_get_irq_byname(pdev, "ONKEY");
> > +	if (irq < 0) {
> > +		dev_err(&pdev->dev,
> > +			"Failed to get an IRQ for input device, %d\n", irq);
> > +		return -EINVAL;
> > +	}
> > +
> > +	onkey = devm_kzalloc(&pdev->dev, sizeof(*onkey), GFP_KERNEL);
> > +	if (!onkey) {
> > +		dev_err(&pdev->dev, "Failed to allocate memory\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	input_dev = input_allocate_device();
> > +	if (!input_dev) {
> > +		dev_err(&pdev->dev, "Failed to allocate memory\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	onkey->input = input_dev;
> > +	onkey->da9055 = da9055;
> > +	input_dev->name = "da9055-onkey";
> > +	input_dev->phys = "da9055-onkey/input0";
> > +	input_dev->dev.parent = &pdev->dev;
> > +
> > +	input_dev->evbit[0] = BIT_MASK(EV_KEY);
> > +	__set_bit(KEY_POWER, input_dev->keybit);
> > +
> > +	INIT_DELAYED_WORK(&onkey->work, da9055_onkey_work);
> > +
> > +	irq = regmap_irq_get_virq(da9055->irq_data, irq);
> > +	err = request_threaded_irq(irq, NULL, da9055_onkey_irq,
> > +				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
> > +				   "ONKEY", onkey);
> > +	if (err < 0) {
> > +		dev_err(&pdev->dev,
> > +			"Failed to register ONKEY IRQ %d, error = %d\n",
> > +			irq, err);
> > +		goto free_onkey;
> > +	}
> > +
> > +	err = input_register_device(input_dev);
> > +	if (err) {
> > +		dev_err(&pdev->dev, "Unable to register input device, %d\n",
> > +			err);
> > +		goto free_irq;
> > +	}
> > +
> > +	platform_set_drvdata(pdev, onkey);
> > +
> > +	return 0;
> > +
> > +free_irq:
> > +	free_irq(irq, onkey);
> > +free_onkey:
> > +	cancel_delayed_work_sync(&onkey->work);
> > +	input_free_device(input_dev);
> > +
> > +	return err;
> > +}
> > +
> > +static int __devexit da9055_onkey_remove(struct platform_device *pdev)
> > +{
> > +	struct da9055_onkey *onkey = platform_get_drvdata(pdev);
> > +	int irq = platform_get_irq_byname(pdev, "ONKEY");
> > +
> > +	irq = regmap_irq_get_virq(onkey->da9055->irq_data, irq);
> > +	free_irq(irq, onkey);
> > +	cancel_delayed_work_sync(&onkey->work);
> > +	input_unregister_device(onkey->input);
> > +
> > +	return 0;
> > +}
> > +
> > +static struct platform_driver da9055_onkey_driver = {
> > +	.probe	= da9055_onkey_probe,
> > +	.remove	= __devexit_p(da9055_onkey_remove),
> > +	.driver = {
> > +		.name	= "da9055-onkey",
> > +		.owner	= THIS_MODULE,
> > +	},
> > +};
> > +
> > +module_platform_driver(da9055_onkey_driver);
> > +
> > +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
> > +MODULE_DESCRIPTION("Onkey driver for DA9055");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:da9055-onkey");
> 
> 

-- 
Dmitry

      reply	other threads:[~2012-10-23 15:41 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-12  9:32 [Patch v4 7/7] Onkey: DA9055 Onkey driver Ashish Jangam
2012-10-23  9:59 ` Ashish Jangam
2012-10-23 15:41   ` Dmitry Torokhov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121023154151.GA649@core.coreip.homeip.net \
    --to=dmitry.torokhov@gmail.com \
    --cc=ashish.jangam@kpitcummins.com \
    --cc=dchen@diasemi.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@slimlogic.co.uk \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).