From: Lee Jones <lee.jones@linaro.org>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, arnd@arndb.de,
linus.walleij@stericsson.com,
Jonas Aaberg <jonas.aberg@stericsson.com>,
linux-input@vger.kernel.org,
Philippe Langlais <philippe.langlais@linaro.org>
Subject: Re: [PATCH 1/2] input: gpio-keys: Disable hardware on suspend
Date: Mon, 26 Nov 2012 09:05:03 +0000 [thread overview]
Message-ID: <20121126090503.GB12782@gmail.com> (raw)
In-Reply-To: <20121125083229.GB21091@core.coreip.homeip.net>
> On Thu, Nov 22, 2012 at 01:23:36PM +0000, Lee Jones wrote:
> > From: Jonas Aaberg <jonas.aberg@stericsson.com>
> >
> > Disable hardware if active when suspending if the hw can not
> > wake the system from suspend.
>
> How about below instead (needs the other patch I have just sent out)?
Sorry Dmitry, I'm a little confused. What does this mean?
> Input: gpio-keys - disable hardware on suspend
>
> From: Jonas Aaberg <jonas.aberg@stericsson.com>
>
> Disable hardware if active when suspending if the hw can not
> wake the system from suspend.
>
> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
> Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/keyboard/gpio_keys.c | 27 ++++++++++++++++++++++-----
> 1 file changed, 22 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
> index c7764ca..79435de 100644
> --- a/drivers/input/keyboard/gpio_keys.c
> +++ b/drivers/input/keyboard/gpio_keys.c
> @@ -803,6 +803,7 @@ static int gpio_keys_remove(struct platform_device *pdev)
> static int gpio_keys_suspend(struct device *dev)
> {
> struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
> + struct input_dev *input = ddata->input;
> int i;
>
> if (device_may_wakeup(dev)) {
> @@ -811,6 +812,11 @@ static int gpio_keys_suspend(struct device *dev)
> if (bdata->button->wakeup)
> enable_irq_wake(bdata->irq);
> }
> + } else {
> + mutex_lock(&input->mutex);
> + if (input->users)
> + gpio_keys_close(input);
> + mutex_unlock(&input->mutex);
> }
>
> return 0;
> @@ -819,16 +825,27 @@ static int gpio_keys_suspend(struct device *dev)
> static int gpio_keys_resume(struct device *dev)
> {
> struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
> + struct input_dev *input = ddata->input;
> + int error = 0;
> int i;
>
> - for (i = 0; i < ddata->pdata->nbuttons; i++) {
> - struct gpio_button_data *bdata = &ddata->data[i];
> - if (bdata->button->wakeup && device_may_wakeup(dev))
> - disable_irq_wake(bdata->irq);
> + if (device_may_wakeup(dev)) {
> + for (i = 0; i < ddata->pdata->nbuttons; i++) {
> + struct gpio_button_data *bdata = &ddata->data[i];
> + if (bdata->button->wakeup)
> + disable_irq_wake(bdata->irq);
> + }
> + } else {
> + mutex_lock(&input->mutex);
> + if (input->users)
> + error = gpio_keys_open(input);
> + mutex_unlock(&input->mutex);
> }
>
> - gpio_keys_report_state(ddata);
> + if (error)
> + return error;
>
> + gpio_keys_report_state(ddata);
> return 0;
> }
> #endif
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2012-11-26 9:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-22 13:23 [PATCH 1/2] input: gpio-keys: Disable hardware on suspend Lee Jones
2012-11-22 13:23 ` [PATCH 2/2] input: gpio-keys: Add runtime support Lee Jones
2012-11-22 14:51 ` Lee Jones
2012-11-25 8:32 ` [PATCH 1/2] input: gpio-keys: Disable hardware on suspend Dmitry Torokhov
2012-11-26 9:05 ` Lee Jones [this message]
2012-11-26 9:32 ` Dmitry Torokhov
2012-12-01 17:01 ` Linus Walleij
-- strict thread matches above, loose matches on Subject: below --
2012-10-11 14:15 Lee Jones
2012-10-13 6:17 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121126090503.GB12782@gmail.com \
--to=lee.jones@linaro.org \
--cc=arnd@arndb.de \
--cc=dmitry.torokhov@gmail.com \
--cc=jonas.aberg@stericsson.com \
--cc=linus.walleij@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=philippe.langlais@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).