Re: [PATCH 0/4] iio: input: ti_am335x_adc: Add continuous sampling support round 5

["Zubair Lutfullah :" <zubair.lutfullah@gmail.com>]

On Wed, Aug 14, 2013 at 07:57:12PM +0100, Jonathan Cameron wrote:
> I'll actually look at these later, but please do put a version number
> in your cover letter patch subject.
> [PATCH V5 0/4] is pretty much the convention to reduce the chance of anyone
> looking at the wrong version.
Noted. 

I actually had round 4/5 at the end of the subjects..

Thanks
Zubair
> 
> Thanks,
> 
> Jonathan
> 
> On 08/13/13 21:04, Zubair Lutfullah wrote:
> > Round 5 updates. Fixed the define order in the header as guided by Lee.
> > 
> > Round 4 updates below.
> > 
> > Note: These apply to the fixes-togreg branch in IIO because of
> > a fix on the adc side in there.
> > 
> > The first few are for input which tweak the TSC driver to
> > allow ADC in continuous mode with irqs to work nicely together.
> > 
> > The last one is for iio which adds continuous mode to the adc side.
> > 
> > Received feedback on previous series.
> > 1. What if IRQs occur together?
> > This is handled now. Even if both assert.
> > They both work.
> > 
> > 2. IIO error handling wrong.
> > Fixed now.
> > 
> > 3. Headers wierd in IIO.
> > Fixed.
> > 
> > Apart from that, found a few bugs in continuous mode
> > here and there. And squashed them into the same patch.
> > 
> > Thanks
> > Zubair Lutfullah
> > 
> > Zubair Lutfullah (4):
> >   input: ti_am335x_tsc: correct step mask update after IRQ
> >   input: ti_am335x_tsc: Increase sequencer delay time
> >   input: ti_am335x_tsc: Enable shared IRQ for TSC, add overrun and
> >     underflow checks
> >   iio: ti_am335x_adc: Add continuous sampling and trigger support
> > 
> >  drivers/iio/adc/ti_am335x_adc.c           |  353 ++++++++++++++++++++++++-----
> >  drivers/input/touchscreen/ti_am335x_tsc.c |   45 +++-
> >  include/linux/mfd/ti_am335x_tscadc.h      |   14 ++
> >  3 files changed, 342 insertions(+), 70 deletions(-)
> >