From: <vencik@razdva.cz>
To: "Qiting Chen" <elaineee66@gmail.com>
Cc: linux-input@vger.kernel.org
Subject: Re: [PATCH] input: add support for ALPS v7 protocol device
Date: Wed, 19 Mar 2014 10:11:41 +0100 [thread overview]
Message-ID: <20140319101141.998512B7@razdva.cz> (raw)
In-Reply-To: <1395219353-27683-1-git-send-email-qiting.chen@cn.alps.com>
Hello,
by the E7 and EC identification, that's what I have on Toshiba Portege Z30-A-12N, too
(E7 = 0x73, 0x03, 0x0a, EC = 0x88, 0xb3, 0x22).
I was in process of creation of my own driver; you've overtaken me... :-)
Thanks,
Regards,
vencik
______________________________________________________________
> Od: Qiting Chen <elaineee66@gmail.com>
> Komu: <dmitry.torokhov@gmail.com>, <cernekee@gmail.com>, <dturvene@dahetral.com>
> Datum: 19.03.2014 09:57
> Předmět: [PATCH] input: add support for ALPS v7 protocol device
>
> CC: linux-input@vger.kernel.org, ndevos@redhat.com, jclift@redhat.com--cc, "Qiting Chen" <qiting.chen@cn.alps.com>
>Here is a patch of supporting ALPS v7 protocol device.
>ALPS v7 protocol device is a clickpad that is currently used on
>Lenovo S430/S435/S530, Lenovo Z410/Z510, HP Odie, HP Revolve 810 G1,
>as well as other machines with ALPS Touchpad of following infomation:
> Device ID = 0x73, 0x03, 0x0a
> Firmware ID = 0x88, 0xb*, 0x**
>
>A v7 protocol support patch is first relesed 2 months ago:
>http://www.spinics.net/lists/linux-input/msg29084.html
>After that some feedbacks were received from end user. Now this patch fixed the bugs
>reported by them:
>1) Fix cursor jump when doing a right click drag
>2) Fix cursor jitter when button clicking
>
>Signed-off-by: Qiting Chen <qiting.chen@cn.alps.com>
>---
> drivers/input/mouse/alps.c | 560 ++++++++++++++++++++++++++++++++++++++++++---
> drivers/input/mouse/alps.h | 132 +++++++++--
> 2 files changed, 641 insertions(+), 51 deletions(-)
>
>diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
>index fb15c64..383281f 100644
>--- a/drivers/input/mouse/alps.c
>+++ b/drivers/input/mouse/alps.c
>@@ -32,6 +32,13 @@
> #define ALPS_REG_BASE_RUSHMORE 0xc2c0
> #define ALPS_REG_BASE_PINNACLE 0x0000
>
>+#define LEFT_BUTTON_BIT 0x01
>+#define RIGHT_BUTTON_BIT 0x02
>+
>+#define V7_LARGE_MOVEMENT 130
>+#define V7_DEAD_ZONE_OFFSET_X 72
>+#define V7_DEAD_ZONE_OFFSET_Y 72
>+
> static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
> { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */
> { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
>@@ -99,6 +106,7 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
> #define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
> #define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
> 6-byte ALPS packet */
>+#define ALPS_BTNLESS 0x100 /* ALPS ClickPad flag */
>
> static const struct alps_model_info alps_model_data[] = {
> { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
>@@ -140,6 +148,20 @@ static void alps_set_abs_params_mt(struct alps_data *priv,
> * isn't valid per PS/2 spec.
> */
>
>+static unsigned int alps_pt_distance(struct alps_abs_data *pt0,
>+ struct alps_abs_data *pt1)
>+{
>+ int vect_x, vect_y;
>+
>+ if (!pt0 || !pt1)
>+ return 0;
>+
>+ vect_x = pt0->x - pt1->x;
>+ vect_y = pt0->y - pt1->y;
>+
>+ return int_sqrt(vect_x * vect_x + vect_y * vect_y);
>+}
>+
> /* Packet formats are described in Documentation/input/alps.txt */
>
> static bool alps_is_valid_first_byte(struct alps_data *priv,
>@@ -320,8 +342,8 @@ static void alps_process_bitmap_dolphin(struct alps_data *priv,
> end_bit = y_msb - 1;
> box_middle_y = (priv->y_max * (start_bit + end_bit)) /
> (2 * (priv->y_bits - 1));
>- *x1 = fields->x;
>- *y1 = fields->y;
>+ *x1 = fields->pt.x;
>+ *y1 = fields->pt.y;
> *x2 = 2 * box_middle_x - *x1;
> *y2 = 2 * box_middle_y - *y1;
> }
>@@ -461,6 +483,38 @@ static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers,
> alps_set_slot(dev, 1, num_fingers == 2, x2, y2);
> }
>
>+static void alps_report_coord_and_btn(struct psmouse *psmouse,
>+ struct alps_fields *f)
>+{
>+ struct input_dev *dev;
>+
>+ if (!psmouse || !f)
>+ return;
>+
>+ dev = psmouse->dev;
>+
>+ if (f->fingers) {
>+ input_report_key(dev, BTN_TOUCH, 1);
>+ alps_report_semi_mt_data(dev, f->fingers,
>+ f->pt_img[0].x, f->pt_img[0].y,
>+ f->pt_img[1].x, f->pt_img[1].y);
>+ input_mt_report_finger_count(dev, f->fingers);
>+
>+ input_report_abs(dev, ABS_X, f->pt_img[0].x);
>+ input_report_abs(dev, ABS_Y, f->pt_img[0].y);
>+ input_report_abs(dev, ABS_PRESSURE, f->pt_img[0].z);
>+ } else {
>+ input_report_key(dev, BTN_TOUCH, 0);
>+ input_mt_report_finger_count(dev, 0);
>+ input_report_abs(dev, ABS_PRESSURE, 0);
>+ }
>+
>+ input_report_key(dev, BTN_LEFT, f->btn.left);
>+ input_report_key(dev, BTN_RIGHT, f->btn.right);
>+
>+ input_sync(dev);
>+}
>+
> static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
> {
> struct alps_data *priv = psmouse->private;
>@@ -523,13 +577,13 @@ static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
>
> static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p)
> {
>- f->left = !!(p[3] & 0x01);
>- f->right = !!(p[3] & 0x02);
>- f->middle = !!(p[3] & 0x04);
>+ f->btn.left = !!(p[3] & 0x01);
>+ f->btn.right = !!(p[3] & 0x02);
>+ f->btn.middle = !!(p[3] & 0x04);
>
>- f->ts_left = !!(p[3] & 0x10);
>- f->ts_right = !!(p[3] & 0x20);
>- f->ts_middle = !!(p[3] & 0x40);
>+ f->btn.ts_left = !!(p[3] & 0x10);
>+ f->btn.ts_right = !!(p[3] & 0x20);
>+ f->btn.ts_middle = !!(p[3] & 0x40);
> }
>
> static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
>@@ -546,10 +600,10 @@ static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p,
> ((p[2] & 0x7f) << 1) |
> (p[4] & 0x01);
>
>- f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
>+ f->pt.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
> ((p[0] & 0x30) >> 4);
>- f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
>- f->z = p[5] & 0x7f;
>+ f->pt.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
>+ f->pt.z = p[5] & 0x7f;
>
> alps_decode_buttons_v3(f, p);
> }
>@@ -573,9 +627,9 @@ static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p,
> f->is_mp = !!(p[0] & 0x20);
>
> if (!f->is_mp) {
>- f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
>- f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
>- f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
>+ f->pt.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
>+ f->pt.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
>+ f->pt.z = (p[0] & 4) ? 0 : p[5] & 0x7f;
> alps_decode_buttons_v3(f, p);
> } else {
> f->fingers = ((p[0] & 0x6) >> 1 |
>@@ -687,7 +741,7 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
> * with x, y, and z all zero, so these seem to be flukes.
> * Ignore them.
> */
>- if (f.x && f.y && !f.z)
>+ if (f.pt.x && f.pt.y && !f.pt.z)
> return;
>
> /*
>@@ -695,12 +749,12 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
> * to rely on ST data.
> */
> if (!fingers) {
>- x1 = f.x;
>- y1 = f.y;
>- fingers = f.z > 0 ? 1 : 0;
>+ x1 = f.pt.x;
>+ y1 = f.pt.y;
>+ fingers = f.pt.z > 0 ? 1 : 0;
> }
>
>- if (f.z >= 64)
>+ if (f.pt.z >= 64)
> input_report_key(dev, BTN_TOUCH, 1);
> else
> input_report_key(dev, BTN_TOUCH, 0);
>@@ -709,22 +763,22 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
>
> input_mt_report_finger_count(dev, fingers);
>
>- input_report_key(dev, BTN_LEFT, f.left);
>- input_report_key(dev, BTN_RIGHT, f.right);
>- input_report_key(dev, BTN_MIDDLE, f.middle);
>+ input_report_key(dev, BTN_LEFT, f.btn.left);
>+ input_report_key(dev, BTN_RIGHT, f.btn.right);
>+ input_report_key(dev, BTN_MIDDLE, f.btn.middle);
>
>- if (f.z > 0) {
>- input_report_abs(dev, ABS_X, f.x);
>- input_report_abs(dev, ABS_Y, f.y);
>+ if (f.pt.z > 0) {
>+ input_report_abs(dev, ABS_X, f.pt.x);
>+ input_report_abs(dev, ABS_Y, f.pt.y);
> }
>- input_report_abs(dev, ABS_PRESSURE, f.z);
>+ input_report_abs(dev, ABS_PRESSURE, f.pt.z);
>
> input_sync(dev);
>
> if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
>- input_report_key(dev2, BTN_LEFT, f.ts_left);
>- input_report_key(dev2, BTN_RIGHT, f.ts_right);
>- input_report_key(dev2, BTN_MIDDLE, f.ts_middle);
>+ input_report_key(dev2, BTN_LEFT, f.btn.ts_left);
>+ input_report_key(dev2, BTN_RIGHT, f.btn.ts_right);
>+ input_report_key(dev2, BTN_MIDDLE, f.btn.ts_middle);
> input_sync(dev2);
> }
> }
>@@ -916,6 +970,364 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
> input_sync(dev);
> }
>
>+static bool alps_is_valid_package_v7(struct psmouse *psmouse)
>+{
>+ if ((psmouse->pktcnt == 3) && ((psmouse->packet[2] & 0x40) != 0x40))
>+ return false;
>+ if ((psmouse->pktcnt == 4) && ((psmouse->packet[3] & 0x48) != 0x48))
>+ return false;
>+ if ((psmouse->pktcnt == 6) && ((psmouse->packet[5] & 0x40) != 0x0))
>+ return false;
>+ return true;
>+}
>+
>+static int alps_drop_unsupported_packet_v7(struct psmouse *psmouse)
>+{
>+ struct alps_data *priv = psmouse->private;
>+ int drop = 1;
>+
>+ if (priv->r.v7.pkt_id == V7_PACKET_ID_NEW ||
>+ priv->r.v7.pkt_id == V7_PACKET_ID_TWO ||
>+ priv->r.v7.pkt_id == V7_PACKET_ID_MULTI ||
>+ priv->r.v7.pkt_id == V7_PACKET_ID_IDLE)
>+ drop = 0;
>+
>+ return drop;
>+}
>+
>+static unsigned char alps_get_packet_id_v7(char *byte)
>+{
>+ unsigned char packet_id;
>+
>+ if (byte[4] & 0x40)
>+ packet_id = V7_PACKET_ID_TWO;
>+ else if (byte[4] & 0x01)
>+ packet_id = V7_PACKET_ID_MULTI;
>+ else if ((byte[0] & 0x10) && !(byte[4] & 0x43))
>+ packet_id = V7_PACKET_ID_NEW;
>+ else
>+ packet_id = V7_PACKET_ID_IDLE;
>+
>+ return packet_id;
>+}
>+
>+static void alps_get_finger_coordinate_v7(struct alps_abs_data *pt,
>+ unsigned char *pkt,
>+ unsigned char pkt_id)
>+{
>+ if ((pkt_id == V7_PACKET_ID_TWO) ||
>+ (pkt_id == V7_PACKET_ID_MULTI) ||
>+ (pkt_id == V7_PACKET_ID_NEW)) {
>+ pt[0].x = ((pkt[2] & 0x80) << 4);
>+ pt[0].x |= ((pkt[2] & 0x3F) << 5);
>+ pt[0].x |= ((pkt[3] & 0x30) >> 1);
>+ pt[0].x |= (pkt[3] & 0x07);
>+ pt[0].y = (pkt[1] << 3) | (pkt[0] & 0x07);
>+
>+ pt[1].x = ((pkt[3] & 0x80) << 4);
>+ pt[1].x |= ((pkt[4] & 0x80) << 3);
>+ pt[1].x |= ((pkt[4] & 0x3F) << 4);
>+ pt[1].y = ((pkt[5] & 0x80) << 3);
>+ pt[1].y |= ((pkt[5] & 0x3F) << 4);
>+
>+ if (pkt_id == V7_PACKET_ID_TWO) {
>+ pt[1].x &= ~0x000F;
>+ pt[1].y |= 0x000F;
>+ } else if (pkt_id == V7_PACKET_ID_MULTI) {
>+ pt[1].x &= ~0x003F;
>+ pt[1].y &= ~0x0020;
>+ pt[1].y |= ((pkt[4] & 0x02) << 4);
>+ pt[1].y |= 0x001F;
>+ } else if (pkt_id == V7_PACKET_ID_NEW) {
>+ pt[1].x &= ~0x003F;
>+ pt[1].x |= (pkt[0] & 0x20);
>+ pt[1].y |= 0x000F;
>+ }
>+
>+ pt[0].y = 0x7FF - pt[0].y;
>+ pt[1].y = 0x7FF - pt[1].y;
>+
>+ pt[0].z = (pt[0].x && pt[0].y) ? 62 : 0;
>+ pt[1].z = (pt[1].x && pt[1].y) ? 62 : 0;
>+ }
>+}
>+
>+static void alps_decode_packet_v7(struct alps_fields *f,
>+ unsigned char *p,
>+ struct psmouse *psmouse)
>+{
>+ struct alps_data *priv = psmouse->private;
>+ static struct v7_raw prev_r;
>+
>+ priv->r.v7.pkt_id = alps_get_packet_id_v7(p);
>+
>+ alps_get_finger_coordinate_v7(f->pt_img, p, priv->r.v7.pkt_id);
>+
>+ priv->r.v7.rest_left = 0;
>+ priv->r.v7.rest_right = 0;
>+ priv->r.v7.additional_fingers = 0;
>+ priv->phy_btn = 0;
>+
>+ if (priv->r.v7.pkt_id == V7_PACKET_ID_TWO ||
>+ priv->r.v7.pkt_id == V7_PACKET_ID_MULTI) {
>+ priv->r.v7.rest_left = (p[0] & 0x10) >> 4;
>+ priv->r.v7.rest_right = (p[0] & 0x20) >> 5;
>+ }
>+
>+ if (priv->r.v7.pkt_id == V7_PACKET_ID_MULTI)
>+ priv->r.v7.additional_fingers = p[5] & 0x03;
>+
>+ priv->phy_btn = (p[0] & 0x80) >> 7;
>+
>+ if (priv->r.v7.pkt_id == V7_PACKET_ID_TWO) {
>+ if (f->pt_img[0].z != 0 && f->pt_img[1].z != 0)
>+ priv->r.v7.raw_fn = 2;
>+ else
>+ priv->r.v7.raw_fn = 1;
>+ } else if (priv->r.v7.pkt_id == V7_PACKET_ID_MULTI)
>+ priv->r.v7.raw_fn = 3 + priv->r.v7.additional_fingers;
>+ else if (priv->r.v7.pkt_id == V7_PACKET_ID_IDLE)
>+ priv->r.v7.raw_fn = 0;
>+ else if (priv->r.v7.pkt_id == V7_PACKET_ID_NEW)
>+ priv->r.v7.raw_fn = prev_r.raw_fn;
>+
>+ /* It is a trick to bypass firmware bug of older version
>+ that 'New' Packet is missed when finger number changed.
>+ We fake a 'New' Packet in such cases.*/
>+ if (priv->r.v7.pkt_id == V7_PACKET_ID_TWO ||
>+ priv->r.v7.pkt_id == V7_PACKET_ID_MULTI ||
>+ priv->r.v7.pkt_id == V7_PACKET_ID_IDLE) {
>+ if (priv->r.v7.raw_fn != prev_r.raw_fn)
>+ priv->r.v7.pkt_id = V7_PACKET_ID_NEW;
>+ }
>+
>+ memcpy(&prev_r, &priv->r.v7, sizeof(struct v7_raw));
>+}
>+
>+static void alps_set_each_pt_attr_v7(struct psmouse *psmouse,
>+ struct alps_abs_data *pt,
>+ struct alps_bl_pt_attr *pt_attr)
>+{
>+ struct alps_data *priv = psmouse->private;
>+ unsigned int dist;
>+
>+ if (!pt_attr->is_init_pt_got && pt->z != 0) {
>+ pt_attr->is_init_pt_got = 1;
>+ pt_attr->is_counted = 0;
>+ memcpy(&pt_attr->init_pt, pt, sizeof(pt_attr->init_pt));
>+ }
>+
>+ if (pt->z != 0) {
>+ if (pt->y < priv->resting_zone_y_min) {
>+ /* A finger is recognized as a non-resting finger
>+ if it's position is outside the resting finger zone.*/
>+ pt_attr->zone = ZONE_NORMAL;
>+ pt_attr->is_counted = 1;
>+ } else {
>+ /* A finger is recognized as a resting finger if it's
>+ position is inside the resting finger zone and there's
>+ no large movement from it's touch down position.*/
>+ pt_attr->zone = ZONE_RESTING;
>+
>+ if (pt->x > priv->x_max / 2)
>+ pt_attr->zone |= ZONE_RIGHT_BTN;
>+ else
>+ pt_attr->zone |= ZONE_LEFT_BTN;
>+
>+ /* A resting finger will turn to be a non-resting
>+ finger if it has made large movement from it's touch
>+ down position. A non-resting finger will never turn
>+ to a resting finger before it leaves the touchpad
>+ surface.*/
>+ if (pt_attr->is_init_pt_got) {
>+ dist = alps_pt_distance(pt, &pt_attr->init_pt);
>+
>+ if (dist > V7_LARGE_MOVEMENT)
>+ pt_attr->is_counted = 1;
>+ }
>+ }
>+ }
>+}
>+
>+static void alps_set_pt_attr_v7(struct psmouse *psmouse,
>+ struct alps_fields *f)
>+{
>+ struct alps_data *priv = psmouse->private;
>+ int i;
>+
>+ switch (priv->r.v7.pkt_id) {
>+ case V7_PACKET_ID_TWO:
>+ case V7_PACKET_ID_MULTI:
>+ for (i = 0; i < V7_IMG_PT_NUM; i++) {
>+ alps_set_each_pt_attr_v7(psmouse,
>+ &f->pt_img[i],
>+ &priv->pt_attr[i]);
>+ }
>+ break;
>+ default:
>+ /*All finger attributes are cleared when packet ID is
>+ 'IDLE', 'New'or other unknown IDs. An 'IDLE' packet
>+ indicates that there's no finger and no button activity.
>+ A 'NEW' packet indicates the finger position in packet
>+ is not continues from previous packet. Such as the
>+ condition there's finger placed or lifted. In these cases,
>+ finger attributes will be reset.*/
>+ memset(priv->pt_attr, 0, sizeof(priv->pt_attr[0]) * 2);
>+ break;
>+ }
>+}
>+
>+static void alps_cal_output_finger_num_v7(struct psmouse *psmouse,
>+ struct alps_fields *f)
>+{
>+ struct alps_data *priv = psmouse->private;
>+ unsigned int fn = 0;
>+ int i;
>+
>+ switch (priv->r.v7.pkt_id) {
>+ case V7_PACKET_ID_IDLE:
>+ case V7_PACKET_ID_NEW:
>+ /*No finger is reported when packet ID is 'IDLE' or 'New'.
>+ An 'IDLE' packet indicates that there's no finger on touchpad.
>+ A 'NEW' packet indicates there's finger placed or lifted.
>+ Finger position of 'New' packet is not continues from the
>+ previous packet.*/
>+ fn = 0;
>+ break;
>+ case V7_PACKET_ID_TWO:
>+ if (f->pt_img[0].z == 0) {
>+ /*The first finger slot is zero when a non-resting
>+ finger lifted and remaining only one resting finger
>+ on touchpad. Hardware report the remaining resting
>+ finger in second slot. This resting is ignored*/
>+ fn = 0;
>+ } else if (f->pt_img[1].z == 0) {
>+ /* The second finger slot is zero if there's
>+ only one finger*/
>+ fn = 1;
>+ } else {
>+ /*All non-resting fingers will be counted to report*/
>+ fn = 0;
>+ for (i = 0; i < V7_IMG_PT_NUM; i++) {
>+ if (priv->pt_attr[i].is_counted)
>+ fn++;
>+ }
>+
>+ /*In the case that both fingers are
>+ resting fingers, report the first one*/
>+ if (!priv->pt_attr[0].is_counted &&
>+ !priv->pt_attr[1].is_counted) {
>+ fn = 1;
>+ }
>+ }
>+ break;
>+ case V7_PACKET_ID_MULTI:
>+ /*A packet ID 'MULTI' indicats that at least 3 non-resting
>+ finger exist.*/
>+ fn = 3 + priv->r.v7.additional_fingers;
>+ break;
>+ }
>+
>+ f->fingers = fn;
>+}
>+
>+static void alps_button_dead_zone_filter(struct psmouse *psmouse,
>+ struct alps_fields *f,
>+ struct alps_fields *prev_f)
>+{
>+ struct alps_data *priv = psmouse->private;
>+ int dx, dy;
>+
>+ if (priv->prev_phy_btn == 0 && priv->phy_btn != 0) {
>+ memcpy(&priv->pt_attr[0].init_dead_pt,
>+ &f->pt_img[0],
>+ sizeof(struct alps_abs_data));
>+ }
>+
>+ if (priv->pt_attr[0].init_dead_pt.x != 0 &&
>+ priv->pt_attr[0].init_dead_pt.x != 0) {
>+ dx = f->pt_img[0].x - priv->pt_attr[0].init_dead_pt.x;
>+ dy = f->pt_img[0].y - priv->pt_attr[0].init_dead_pt.y;
>+ if ((abs(dx) > V7_DEAD_ZONE_OFFSET_X) ||
>+ (abs(dy) > V7_DEAD_ZONE_OFFSET_Y)) {
>+ memset(&priv->pt_attr[0].init_dead_pt, 0,
>+ sizeof(struct alps_abs_data));
>+ priv->btn_delay_cnt = 0;
>+ } else {
>+ memcpy(&f->pt_img[0],
>+ &prev_f->pt_img[0],
>+ sizeof(struct alps_abs_data));
>+ if (priv->prev_phy_btn == 0 && priv->phy_btn != 0)
>+ priv->btn_delay_cnt = 2;
>+ }
>+ }
>+
>+ if (priv->btn_delay_cnt > 0) {
>+ f->btn.left = 0;
>+ f->btn.right = 0;
>+ priv->btn_delay_cnt--;
>+ }
>+}
>+
>+static void alps_assign_buttons_v7(struct psmouse *psmouse,
>+ struct alps_fields *f,
>+ struct alps_fields *prev_f)
>+{
>+ struct alps_data *priv = psmouse->private;
>+
>+ if (priv->phy_btn) {
>+ if (!priv->prev_phy_btn) {
>+ /* Report a right click as long as there's finger on
>+ right button zone. Othrewise, report a left click.*/
>+ if (priv->r.v7.rest_right ||
>+ priv->pt_attr[0].zone & ZONE_RIGHT_BTN ||
>+ priv->pt_attr[1].zone & ZONE_RIGHT_BTN) {
>+ f->btn.right = 1;
>+ priv->pressed_btn_bits |= RIGHT_BUTTON_BIT;
>+ } else {
>+ f->btn.left = 1;
>+ priv->pressed_btn_bits |= LEFT_BUTTON_BIT;
>+ }
>+ } else {
>+ if (priv->pressed_btn_bits & RIGHT_BUTTON_BIT)
>+ f->btn.right = 1;
>+ if (priv->pressed_btn_bits & LEFT_BUTTON_BIT)
>+ f->btn.left = 1;
>+ }
>+ } else {
>+ priv->pressed_btn_bits = 0;
>+ f->btn.right = 0;
>+ f->btn.left = 0;
>+ }
>+
>+ alps_button_dead_zone_filter(psmouse, f, prev_f);
>+
>+ priv->prev_phy_btn = priv->phy_btn;
>+}
>+
>+static void alps_process_packet_v7(struct psmouse *psmouse)
>+{
>+ struct alps_data *priv = psmouse->private;
>+ struct alps_fields f = {0};
>+ static struct alps_fields prev_f;
>+ unsigned char *packet = psmouse->packet;
>+
>+ priv->decode_fields(&f, packet, psmouse);
>+
>+ if (alps_drop_unsupported_packet_v7(psmouse))
>+ return;
>+
>+ alps_set_pt_attr_v7(psmouse, &f);
>+
>+ alps_cal_output_finger_num_v7(psmouse, &f);
>+
>+ alps_assign_buttons_v7(psmouse, &f, &prev_f);
>+
>+ alps_report_coord_and_btn(psmouse, &f);
>+
>+ memcpy(&prev_f, &f, sizeof(struct alps_fields));
>+}
>+
> static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
> unsigned char packet[],
> bool report_buttons)
>@@ -1080,6 +1492,14 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
> return PSMOUSE_BAD_DATA;
> }
>
>+ if ((priv->proto_version == ALPS_PROTO_V7 &&
>+ !alps_is_valid_package_v7(psmouse))) {
>+ psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
>+ psmouse->pktcnt - 1,
>+ psmouse->packet[psmouse->pktcnt - 1]);
>+ return PSMOUSE_BAD_DATA;
>+ }
>+
> if (psmouse->pktcnt == psmouse->pktsize) {
> priv->process_packet(psmouse);
> return PSMOUSE_FULL_PACKET;
>@@ -1192,6 +1612,22 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,
> return 0;
> }
>
>+static int alps_check_valid_firmware_id(unsigned char id[])
>+{
>+ int valid = 1;
>+
>+ if (id[0] == 0x73)
>+ valid = 1;
>+ else if (id[0] == 0x88) {
>+ if ((id[1] == 0x07) ||
>+ (id[1] == 0x08) ||
>+ ((id[1] & 0xf0) == 0xB0))
>+ valid = 1;
>+ }
>+
>+ return valid;
>+}
>+
> static int alps_enter_command_mode(struct psmouse *psmouse)
> {
> unsigned char param[4];
>@@ -1201,8 +1637,7 @@ static int alps_enter_command_mode(struct psmouse *psmouse)
> return -1;
> }
>
>- if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) &&
>- param[0] != 0x73) {
>+ if (!alps_check_valid_firmware_id(param)) {
> psmouse_dbg(psmouse,
> "unknown response while entering command mode\n");
> return -1;
>@@ -1704,6 +2139,36 @@ error:
> return ret;
> }
>
>+static int alps_hw_init_v7(struct psmouse *psmouse)
>+{
>+ struct ps2dev *ps2dev = &psmouse->ps2dev;
>+ int reg_val, ret = -1;
>+
>+ if (alps_enter_command_mode(psmouse))
>+ goto error;
>+
>+ reg_val = alps_command_mode_read_reg(psmouse, 0xc2d9);
>+ if (reg_val == -1)
>+ goto error;
>+
>+ if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64))
>+ goto error;
>+
>+ reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4);
>+ if (reg_val == -1)
>+ goto error;
>+
>+ if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02))
>+ goto error;
>+
>+ alps_exit_command_mode(psmouse);
>+ return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
>+
>+error:
>+ alps_exit_command_mode(psmouse);
>+ return ret;
>+}
>+
> /* Must be in command mode when calling this function */
> static int alps_absolute_mode_v4(struct psmouse *psmouse)
> {
>@@ -1875,6 +2340,7 @@ static void alps_set_defaults(struct alps_data *priv)
> priv->set_abs_params = alps_set_abs_params_st;
> priv->x_max = 1023;
> priv->y_max = 767;
>+ priv->slot_number = 1;
> break;
> case ALPS_PROTO_V3:
> priv->hw_init = alps_hw_init_v3;
>@@ -1883,6 +2349,7 @@ static void alps_set_defaults(struct alps_data *priv)
> priv->decode_fields = alps_decode_pinnacle;
> priv->nibble_commands = alps_v3_nibble_commands;
> priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
>+ priv->slot_number = 2;
> break;
> case ALPS_PROTO_V4:
> priv->hw_init = alps_hw_init_v4;
>@@ -1890,6 +2357,7 @@ static void alps_set_defaults(struct alps_data *priv)
> priv->set_abs_params = alps_set_abs_params_mt;
> priv->nibble_commands = alps_v4_nibble_commands;
> priv->addr_command = PSMOUSE_CMD_DISABLE;
>+ priv->slot_number = 2;
> break;
> case ALPS_PROTO_V5:
> priv->hw_init = alps_hw_init_dolphin_v1;
>@@ -1905,6 +2373,7 @@ static void alps_set_defaults(struct alps_data *priv)
> priv->y_max = 660;
> priv->x_bits = 23;
> priv->y_bits = 12;
>+ priv->slot_number = 2;
> break;
> case ALPS_PROTO_V6:
> priv->hw_init = alps_hw_init_v6;
>@@ -1913,6 +2382,28 @@ static void alps_set_defaults(struct alps_data *priv)
> priv->nibble_commands = alps_v6_nibble_commands;
> priv->x_max = 2047;
> priv->y_max = 1535;
>+ priv->slot_number = 2;
>+ break;
>+ case ALPS_PROTO_V7:
>+ priv->hw_init = alps_hw_init_v7;
>+ priv->process_packet = alps_process_packet_v7;
>+ priv->decode_fields = alps_decode_packet_v7;
>+ priv->set_abs_params = alps_set_abs_params_mt;
>+ priv->nibble_commands = alps_v3_nibble_commands;
>+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
>+ priv->x_max = 0xfff;
>+ priv->y_max = 0x7ff;
>+ priv->resting_zone_y_min = 0x654;
>+ priv->byte0 = 0x48;
>+ priv->mask0 = 0x48;
>+ priv->flags = 0;
>+ priv->slot_number = 2;
>+
>+ priv->phy_btn = 0;
>+ priv->prev_phy_btn = 0;
>+ priv->btn_delay_cnt = 0;
>+ priv->pressed_btn_bits = 0;
>+ memset(priv->pt_attr, 0, sizeof(priv->pt_attr[0]) * 2);
> break;
> }
> }
>@@ -1982,6 +2473,11 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
> return -EIO;
> else
> return 0;
>+ } else if (ec[0] == 0x88 && (ec[1] & 0xf0) == 0xB0) {
>+ priv->proto_version = ALPS_PROTO_V7;
>+ alps_set_defaults(priv);
>+
>+ return 0;
> } else if (ec[0] == 0x88 && ec[1] == 0x08) {
> priv->proto_version = ALPS_PROTO_V3;
> alps_set_defaults(priv);
>@@ -2045,7 +2541,7 @@ static void alps_set_abs_params_mt(struct alps_data *priv,
> struct input_dev *dev1)
> {
> set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
>- input_mt_init_slots(dev1, 2, 0);
>+ input_mt_init_slots(dev1, priv->slot_number, 0);
> input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
> input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
>
>diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
>index 03f88b6..dedbd27 100644
>--- a/drivers/input/mouse/alps.h
>+++ b/drivers/input/mouse/alps.h
>@@ -18,11 +18,36 @@
> #define ALPS_PROTO_V4 4
> #define ALPS_PROTO_V5 5
> #define ALPS_PROTO_V6 6
>+#define ALPS_PROTO_V7 7
>+
>+#define MAX_IMG_PT_NUM 5
>+#define V7_IMG_PT_NUM 2
>+
>+#define ZONE_NORMAL 0x01
>+#define ZONE_RESTING 0x02
>+#define ZONE_LEFT_BTN 0x04
>+#define ZONE_RIGHT_BTN 0x08
>
> #define DOLPHIN_COUNT_PER_ELECTRODE 64
> #define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */
> #define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */
>
>+/*
>+ * enum V7_PACKET_ID - defines the packet type for V7
>+ * V7_PACKET_ID_IDLE: There's no finger and no button activity.
>+ * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad
>+ * or there's button activities.
>+ * V7_PACKET_ID_MULTI: There are at least three non-resting fingers.
>+ * V7_PACKET_ID_NEW: The finger position in slot is not continues from
>+ * previous packet.
>+*/
>+enum V7_PACKET_ID {
>+ V7_PACKET_ID_IDLE,
>+ V7_PACKET_ID_TWO,
>+ V7_PACKET_ID_MULTI,
>+ V7_PACKET_ID_NEW,
>+};
>+
> /**
> * struct alps_model_info - touchpad ID table
> * @signature: E7 response string to match.
>@@ -66,15 +91,7 @@ struct alps_nibble_commands {
> };
>
> /**
>- * struct alps_fields - decoded version of the report packet
>- * @x_map: Bitmap of active X positions for MT.
>- * @y_map: Bitmap of active Y positions for MT.
>- * @fingers: Number of fingers for MT.
>- * @x: X position for ST.
>- * @y: Y position for ST.
>- * @z: Z position for ST.
>- * @first_mp: Packet is the first of a multi-packet report.
>- * @is_mp: Packet is part of a multi-packet report.
>+ * struct alps_btn - decoded version of the button status
> * @left: Left touchpad button is active.
> * @right: Right touchpad button is active.
> * @middle: Middle touchpad button is active.
>@@ -82,16 +99,7 @@ struct alps_nibble_commands {
> * @ts_right: Right trackstick button is active.
> * @ts_middle: Middle trackstick button is active.
> */
>-struct alps_fields {
>- unsigned int x_map;
>- unsigned int y_map;
>- unsigned int fingers;
>- unsigned int x;
>- unsigned int y;
>- unsigned int z;
>- unsigned int first_mp:1;
>- unsigned int is_mp:1;
>-
>+struct alps_btn {
> unsigned int left:1;
> unsigned int right:1;
> unsigned int middle:1;
>@@ -102,6 +110,73 @@ struct alps_fields {
> };
>
> /**
>+ * struct alps_btn - decoded version of the X Y Z postion for ST.
>+ * @x: X position for ST.
>+ * @y: Y position for ST.
>+ * @z: Z position for ST.
>+ */
>+struct alps_abs_data {
>+ unsigned int x;
>+ unsigned int y;
>+ unsigned int z;
>+};
>+
>+/**
>+ * struct alps_fields - decoded version of the report packet
>+ * @fingers: Number of fingers for MT.
>+ * @pt: X Y Z postion for ST.
>+ * @pt: X Y Z postion for image MT.
>+ * @x_map: Bitmap of active X positions for MT.
>+ * @y_map: Bitmap of active Y positions for MT.
>+ * @first_mp: Packet is the first of a multi-packet report.
>+ * @is_mp: Packet is part of a multi-packet report.
>+ * @btn: Button activity status
>+ */
>+struct alps_fields {
>+ unsigned int fingers;
>+ struct alps_abs_data pt;
>+ struct alps_abs_data pt_img[MAX_IMG_PT_NUM];
>+ unsigned int x_map;
>+ unsigned int y_map;
>+ unsigned int first_mp:1;
>+ unsigned int is_mp:1;
>+ struct alps_btn btn;
>+};
>+
>+/**
>+ * struct v7_raw - data decoded from raw packet for V7.
>+ * @pkt_id: An id that specifies the type of packet.
>+ * @additional_fingers: Number of additional finger that is neighter included
>+ * in pt slot nor reflected in rest_left and rest_right flag of data packet.
>+ * @rest_left: There are fingers on left resting zone.
>+ * @rest_right: There are fingers on right resting zone.
>+ * @raw_fn: The number of finger on touchpad.
>+ */
>+struct v7_raw {
>+ unsigned char pkt_id;
>+ unsigned int additional_fingers;
>+ unsigned char rest_left;
>+ unsigned char rest_right;
>+ unsigned char raw_fn;
>+};
>+
>+/**
>+ * struct alps_bl_pt_attr - generic attributes of touch points for buttonless device
>+ * @zone: The part of touchpad that the touch point locates
>+ * @is_counted: The touch point is not a resting finger.
>+ * @is_init_pt_got: The touch down point is got.
>+ * @init_pt: The X Y Z position of the touch down point.
>+ * @init_dead_pt: The touch down point of a finger used by dead zone process.
>+ */
>+struct alps_bl_pt_attr {
>+ unsigned char zone;
>+ unsigned char is_counted;
>+ unsigned char is_init_pt_got;
>+ struct alps_abs_data init_pt;
>+ struct alps_abs_data init_dead_pt;
>+};
>+
>+/**
> * struct alps_data - private data structure for the ALPS driver
> * @dev2: "Relative" device used to report trackstick or mouse activity.
> * @phys: Physical path for the relative device.
>@@ -116,8 +191,10 @@ struct alps_fields {
> * @flags: Additional device capabilities (passthrough port, trackstick, etc.).
> * @x_max: Largest possible X position value.
> * @y_max: Largest possible Y position value.
>+ * @resting_zone_y_min: Smallest Y postion value of the bottom resting zone.
> * @x_bits: Number of X bits in the MT bitmap.
> * @y_bits: Number of Y bits in the MT bitmap.
>+ * @img_fingers: Number of image fingers.
> * @hw_init: Protocol-specific hardware init function.
> * @process_packet: Protocol-specific function to process a report packet.
> * @decode_fields: Protocol-specific function to read packet bitfields.
>@@ -132,6 +209,11 @@ struct alps_fields {
> * @fingers: Number of fingers from last MT report.
> * @quirks: Bitmap of ALPS_QUIRK_*.
> * @timer: Timer for flushing out the final report packet in the stream.
>+ * @v7: Data decoded from raw packet for V7
>+ * @phy_btn: Physical button is active.
>+ * @prev_phy_btn: Physical button of previous packet is active.
>+ * @pressed_btn_bits: Pressed positon of button zone
>+ * @pt_attr: Generic attributes of touch points for buttonless device.
> */
> struct alps_data {
> struct input_dev *dev2;
>@@ -145,8 +227,10 @@ struct alps_data {
> unsigned char flags;
> int x_max;
> int y_max;
>+ int resting_zone_y_min;
> int x_bits;
> int y_bits;
>+ unsigned char slot_number;
>
> int (*hw_init)(struct psmouse *psmouse);
> void (*process_packet)(struct psmouse *psmouse);
>@@ -161,6 +245,16 @@ struct alps_data {
> int fingers;
> u8 quirks;
> struct timer_list timer;
>+
>+ /* these are used for buttonless touchpad*/
>+ union {
>+ struct v7_raw v7;
>+ } r;
>+ unsigned char phy_btn;
>+ unsigned char prev_phy_btn;
>+ unsigned char btn_delay_cnt;
>+ unsigned char pressed_btn_bits;
>+ struct alps_bl_pt_attr pt_attr[MAX_IMG_PT_NUM];
> };
>
> #define ALPS_QUIRK_TRACKSTICK_BUTTONS 1 /* trakcstick buttons in trackstick packet */
>--
>1.8.3.2
>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-input" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-03-19 9:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-19 8:55 [PATCH] input: add support for ALPS v7 protocol device Qiting Chen
2014-03-19 9:11 ` vencik [this message]
2014-03-26 12:20 ` Václav Krpec
[not found] ` <CAKvfdtKRqaCVJiFQcF2Q+buSRpacLisaMz6eHK9GmXZbvz9bAA@mail.gmail.com>
2014-03-27 8:41 ` vencik
2014-03-27 9:47 ` vencik
2014-03-27 10:10 ` vencik
2014-03-28 3:36 ` Elaine Chen
2014-04-29 13:52 ` Václav Krpec
2014-04-14 3:05 ` Elaine Chen
2014-04-21 2:12 ` Elaine Chen
2014-04-22 5:26 ` Dmitry Torokhov
2014-04-22 5:42 ` Peter Hutterer
2014-04-22 6:11 ` Elaine Chen
2014-04-22 6:55 ` Peter Hutterer
2014-04-23 6:47 ` Elaine Chen
2014-04-23 19:57 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140319101141.998512B7@razdva.cz \
--to=vencik@razdva.cz \
--cc=elaineee66@gmail.com \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).