From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Himangi Saraogi <himangi774@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
julia.lawall@lip6.fr
Subject: Re: [PATCH] Input: touchscreen : Introduce the use of the managed version of kzalloc
Date: Thu, 29 May 2014 00:15:10 -0700 [thread overview]
Message-ID: <20140529071510.GF11817@core.coreip.homeip.net> (raw)
In-Reply-To: <20140528180214.GA5957@himangi-Dell>
On Wed, May 28, 2014 at 11:32:14PM +0530, Himangi Saraogi wrote:
> This patch moves most data allocated in the probe function from
> unmanaged interfaces to managed interfaces. The kfrees and error
> handling code is done away with. Also, the unnecesary labels are
> removed and the function mrstouch_remove is removed as it becomes
> empty after removing the no longer required function calls. Also,
> linux/device.h include is added to make sure the devm_*() routine
> declarations are unambiguously available.
>
> The following Coccinelle semantic patch was used for making a part of
> the change:
>
> @platform@
> identifier p, probefn, removefn;
> @@
> struct platform_driver p = {
> .probe = probefn,
> .remove = removefn,
> };
>
> @prb@
> identifier platform.probefn, pdev;
> expression e, e1, e2;
> @@
> probefn(struct platform_device *pdev, ...) {
> <+...
> - e = kzalloc(e1, e2)
> + e = devm_kzalloc(&pdev->dev, e1, e2)
> ...
> ?-kfree(e);
> ...+>
> }
>
> @rem depends on prb@
> identifier platform.removefn;
> expression e;
> @@
> removefn(...) {
> <...
> - kfree(e);
> ...>
> }
>
> Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
> Acked-by: Julia Lawall <julia.lawall@lip6.fr>
> ---
> drivers/input/touchscreen/intel-mid-touch.c | 39 ++++++++---------------------
> 1 file changed, 11 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
> index 4f6b156..b1b1e8b 100644
> --- a/drivers/input/touchscreen/intel-mid-touch.c
> +++ b/drivers/input/touchscreen/intel-mid-touch.c
> @@ -36,6 +36,7 @@
> #include <linux/irq.h>
> #include <linux/delay.h>
> #include <asm/intel_scu_ipc.h>
> +#include <linux/device.h>
>
> /* PMIC Interrupt registers */
> #define PMIC_REG_ID1 0x00 /* PMIC ID1 register */
> @@ -580,12 +581,12 @@ static int mrstouch_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> - tsdev = kzalloc(sizeof(struct mrstouch_dev), GFP_KERNEL);
> - input = input_allocate_device();
> + tsdev = devm_kzalloc(&pdev->dev, sizeof(struct mrstouch_dev),
> + GFP_KERNEL);
> + input = devm_input_allocate_device(&pdev->dev);
> if (!tsdev || !input) {
> dev_err(&pdev->dev, "unable to allocate memory\n");
> - err = -ENOMEM;
> - goto err_free_mem;
> + return -ENOMEM;
> }
>
> tsdev->dev = &pdev->dev;
> @@ -598,7 +599,7 @@ static int mrstouch_probe(struct platform_device *pdev)
> err = mrstouch_adc_init(tsdev);
> if (err) {
> dev_err(&pdev->dev, "ADC initialization failed\n");
> - goto err_free_mem;
> + return -ENOMEM;
> }
>
> input->name = "mrst_touchscreen";
> @@ -618,39 +619,22 @@ static int mrstouch_probe(struct platform_device *pdev)
> input_set_abs_params(tsdev->input, ABS_PRESSURE,
> MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
>
> - err = request_threaded_irq(tsdev->irq, NULL, mrstouch_pendet_irq,
> - IRQF_ONESHOT, "mrstouch", tsdev);
> + err = devm_request_threaded_irq(&pdev->dev, tsdev->irq, NULL,
> + mrstouch_pendet_irq, IRQF_ONESHOT,
> + "mrstouch", tsdev);
> if (err) {
> dev_err(tsdev->dev, "unable to allocate irq\n");
> - goto err_free_mem;
> + return -ENOMEM;
This is bad conversion. We used to report 'err' returned by
request_threaded_irq, but now we always report -ENOMEM. I fixed it up
here and in other places and applied.
> }
>
> err = input_register_device(tsdev->input);
> if (err) {
> dev_err(tsdev->dev, "unable to register input device\n");
> - goto err_free_irq;
> + return -ENOMEM;
> }
>
> platform_set_drvdata(pdev, tsdev);
> return 0;
> -
> -err_free_irq:
> - free_irq(tsdev->irq, tsdev);
> -err_free_mem:
> - input_free_device(input);
> - kfree(tsdev);
> - return err;
> -}
> -
> -static int mrstouch_remove(struct platform_device *pdev)
> -{
> - struct mrstouch_dev *tsdev = platform_get_drvdata(pdev);
> -
> - free_irq(tsdev->irq, tsdev);
> - input_unregister_device(tsdev->input);
> - kfree(tsdev);
> -
> - return 0;
> }
>
> static struct platform_driver mrstouch_driver = {
> @@ -659,7 +643,6 @@ static struct platform_driver mrstouch_driver = {
> .owner = THIS_MODULE,
> },
> .probe = mrstouch_probe,
> - .remove = mrstouch_remove,
> };
> module_platform_driver(mrstouch_driver);
>
> --
> 1.9.1
>
--
Dmitry
next prev parent reply other threads:[~2014-05-29 7:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-28 18:02 [PATCH] Input: touchscreen : Introduce the use of the managed version of kzalloc Himangi Saraogi
2014-05-29 7:15 ` Dmitry Torokhov [this message]
2014-05-29 7:20 ` Julia Lawall
2014-05-29 7:28 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140529071510.GF11817@core.coreip.homeip.net \
--to=dmitry.torokhov@gmail.com \
--cc=himangi774@gmail.com \
--cc=julia.lawall@lip6.fr \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).