* [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size
@ 2014-07-17 23:14 Andrew Duggan
2014-07-17 23:14 ` [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices Andrew Duggan
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Andrew Duggan @ 2014-07-17 23:14 UTC (permalink / raw)
To: linux-input, linux-kernel; +Cc: Andrew Duggan, Jiri Kosina, Benjamin Tissoires
It is possible that the hid-rmi driver could get loaded onto a device which does not have the
expected report ids. This should not happen because it would indicate that the hid-rmi driver is
not compatible with that device. However, if it does happen it should return an error from probe
instead of dereferencing a null pointer.
related bug:
https://bugzilla.kernel.org/show_bug.cgi?id=80091
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
---
Added hid_err messages as suggested by Benjamin. This fixes the null pointer dereference from
bug 80091 while the next patch addresses the binding issue in hid-core.
drivers/hid/hid-rmi.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 3221a95..260be7a 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -848,6 +848,8 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
struct rmi_data *data = NULL;
int ret;
size_t alloc_size;
+ struct hid_report *input_report;
+ struct hid_report *output_report;
data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
if (!data)
@@ -866,12 +868,26 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
return ret;
}
- data->input_report_size = (hdev->report_enum[HID_INPUT_REPORT]
- .report_id_hash[RMI_ATTN_REPORT_ID]->size >> 3)
- + 1 /* report id */;
- data->output_report_size = (hdev->report_enum[HID_OUTPUT_REPORT]
- .report_id_hash[RMI_WRITE_REPORT_ID]->size >> 3)
- + 1 /* report id */;
+ input_report = hdev->report_enum[HID_INPUT_REPORT]
+ .report_id_hash[RMI_ATTN_REPORT_ID];
+ if (!input_report) {
+ hid_err(hdev, "device does not have expected input report\n");
+ ret = -ENODEV;
+ return ret;
+ }
+
+ data->input_report_size = (input_report->size >> 3) + 1 /* report id */;
+
+ output_report = hdev->report_enum[HID_OUTPUT_REPORT]
+ .report_id_hash[RMI_WRITE_REPORT_ID];
+ if (!output_report) {
+ hid_err(hdev, "device does not have expected output report\n");
+ ret = -ENODEV;
+ return ret;
+ }
+
+ data->output_report_size = (output_report->size >> 3)
+ + 1 /* report id */;
alloc_size = data->output_report_size + data->input_report_size;
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices
2014-07-17 23:14 [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size Andrew Duggan
@ 2014-07-17 23:14 ` Andrew Duggan
2014-07-18 13:07 ` Benjamin Tissoires
2014-07-29 9:29 ` Jiri Kosina
2014-07-18 13:03 ` [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size Benjamin Tissoires
2014-07-29 9:29 ` Jiri Kosina
2 siblings, 2 replies; 6+ messages in thread
From: Andrew Duggan @ 2014-07-17 23:14 UTC (permalink / raw)
To: linux-input, linux-kernel; +Cc: Andrew Duggan, Jiri Kosina, Benjamin Tissoires
On composite HID devices there may be multiple HID devices on separate interfaces, but hid-rmi
should only bind to the mouse interface. One example is the Dell Venue 11 Pro's keyboard dock
which contains a composite USB device with a HID touchpad and HID keyboard on separate intefaces.
Since the USB Vendor ID is Synaptic's, hid-core is currently trying to bind hid-rmi to all\of
the HID devices. This patch ensures that hid-rmi only binds to the mouse interface.
related bug:
https://bugzilla.kernel.org/show_bug.cgi?id=80091
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
---
drivers/hid/hid-core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8ed66fd..f10e768 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -783,7 +783,9 @@ static int hid_scan_report(struct hid_device *hid)
* Vendor specific handlings
*/
if ((hid->vendor == USB_VENDOR_ID_SYNAPTICS) &&
- (hid->group == HID_GROUP_GENERIC))
+ (hid->group == HID_GROUP_GENERIC) &&
+ /* only bind to the mouse interface of composite USB devices */
+ (hid->bus != BUS_USB || hid->type == HID_TYPE_USBMOUSE))
/* hid-rmi should take care of them, not hid-generic */
hid->group = HID_GROUP_RMI;
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size
2014-07-17 23:14 [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size Andrew Duggan
2014-07-17 23:14 ` [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices Andrew Duggan
@ 2014-07-18 13:03 ` Benjamin Tissoires
2014-07-29 9:29 ` Jiri Kosina
2 siblings, 0 replies; 6+ messages in thread
From: Benjamin Tissoires @ 2014-07-18 13:03 UTC (permalink / raw)
To: Andrew Duggan; +Cc: linux-input, linux-kernel, Jiri Kosina
On Jul 17 2014 or thereabouts, Andrew Duggan wrote:
> It is possible that the hid-rmi driver could get loaded onto a device which does not have the
> expected report ids. This should not happen because it would indicate that the hid-rmi driver is
> not compatible with that device. However, if it does happen it should return an error from probe
> instead of dereferencing a null pointer.
>
> related bug:
> https://bugzilla.kernel.org/show_bug.cgi?id=80091
>
> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
> ---
> Added hid_err messages as suggested by Benjamin. This fixes the null pointer dereference from
> bug 80091 while the next patch addresses the binding issue in hid-core.
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cheers,
Benjamin
>
> drivers/hid/hid-rmi.c | 28 ++++++++++++++++++++++------
> 1 file changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
> index 3221a95..260be7a 100644
> --- a/drivers/hid/hid-rmi.c
> +++ b/drivers/hid/hid-rmi.c
> @@ -848,6 +848,8 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
> struct rmi_data *data = NULL;
> int ret;
> size_t alloc_size;
> + struct hid_report *input_report;
> + struct hid_report *output_report;
>
> data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
> if (!data)
> @@ -866,12 +868,26 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
> return ret;
> }
>
> - data->input_report_size = (hdev->report_enum[HID_INPUT_REPORT]
> - .report_id_hash[RMI_ATTN_REPORT_ID]->size >> 3)
> - + 1 /* report id */;
> - data->output_report_size = (hdev->report_enum[HID_OUTPUT_REPORT]
> - .report_id_hash[RMI_WRITE_REPORT_ID]->size >> 3)
> - + 1 /* report id */;
> + input_report = hdev->report_enum[HID_INPUT_REPORT]
> + .report_id_hash[RMI_ATTN_REPORT_ID];
> + if (!input_report) {
> + hid_err(hdev, "device does not have expected input report\n");
> + ret = -ENODEV;
> + return ret;
> + }
> +
> + data->input_report_size = (input_report->size >> 3) + 1 /* report id */;
> +
> + output_report = hdev->report_enum[HID_OUTPUT_REPORT]
> + .report_id_hash[RMI_WRITE_REPORT_ID];
> + if (!output_report) {
> + hid_err(hdev, "device does not have expected output report\n");
> + ret = -ENODEV;
> + return ret;
> + }
> +
> + data->output_report_size = (output_report->size >> 3)
> + + 1 /* report id */;
>
> alloc_size = data->output_report_size + data->input_report_size;
>
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices
2014-07-17 23:14 ` [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices Andrew Duggan
@ 2014-07-18 13:07 ` Benjamin Tissoires
2014-07-29 9:29 ` Jiri Kosina
1 sibling, 0 replies; 6+ messages in thread
From: Benjamin Tissoires @ 2014-07-18 13:07 UTC (permalink / raw)
To: Andrew Duggan; +Cc: linux-input, linux-kernel, Jiri Kosina
On Jul 17 2014 or thereabouts, Andrew Duggan wrote:
> On composite HID devices there may be multiple HID devices on separate interfaces, but hid-rmi
> should only bind to the mouse interface. One example is the Dell Venue 11 Pro's keyboard dock
> which contains a composite USB device with a HID touchpad and HID keyboard on separate intefaces.
> Since the USB Vendor ID is Synaptic's, hid-core is currently trying to bind hid-rmi to all\of
> the HID devices. This patch ensures that hid-rmi only binds to the mouse interface.
>
> related bug:
> https://bugzilla.kernel.org/show_bug.cgi?id=80091
>
> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
> ---
As mentioned in a private mail, Andrew told me that for now, each
touchpad using hid-rmi he has seen are using the boot mouse protocol, so
this patch will give us some space and will not break existing current
setups.
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cheers,
Benjamin
> drivers/hid/hid-core.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> index 8ed66fd..f10e768 100644
> --- a/drivers/hid/hid-core.c
> +++ b/drivers/hid/hid-core.c
> @@ -783,7 +783,9 @@ static int hid_scan_report(struct hid_device *hid)
> * Vendor specific handlings
> */
> if ((hid->vendor == USB_VENDOR_ID_SYNAPTICS) &&
> - (hid->group == HID_GROUP_GENERIC))
> + (hid->group == HID_GROUP_GENERIC) &&
> + /* only bind to the mouse interface of composite USB devices */
> + (hid->bus != BUS_USB || hid->type == HID_TYPE_USBMOUSE))
> /* hid-rmi should take care of them, not hid-generic */
> hid->group = HID_GROUP_RMI;
>
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size
2014-07-17 23:14 [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size Andrew Duggan
2014-07-17 23:14 ` [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices Andrew Duggan
2014-07-18 13:03 ` [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size Benjamin Tissoires
@ 2014-07-29 9:29 ` Jiri Kosina
2 siblings, 0 replies; 6+ messages in thread
From: Jiri Kosina @ 2014-07-29 9:29 UTC (permalink / raw)
To: Andrew Duggan; +Cc: linux-input, linux-kernel, Benjamin Tissoires
On Thu, 17 Jul 2014, Andrew Duggan wrote:
> It is possible that the hid-rmi driver could get loaded onto a device which does not have the
> expected report ids. This should not happen because it would indicate that the hid-rmi driver is
> not compatible with that device. However, if it does happen it should return an error from probe
> instead of dereferencing a null pointer.
>
> related bug:
> https://bugzilla.kernel.org/show_bug.cgi?id=80091
>
> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Applied, thanks.
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices
2014-07-17 23:14 ` [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices Andrew Duggan
2014-07-18 13:07 ` Benjamin Tissoires
@ 2014-07-29 9:29 ` Jiri Kosina
1 sibling, 0 replies; 6+ messages in thread
From: Jiri Kosina @ 2014-07-29 9:29 UTC (permalink / raw)
To: Andrew Duggan; +Cc: linux-input, linux-kernel, Benjamin Tissoires
On Thu, 17 Jul 2014, Andrew Duggan wrote:
> On composite HID devices there may be multiple HID devices on separate interfaces, but hid-rmi
> should only bind to the mouse interface. One example is the Dell Venue 11 Pro's keyboard dock
> which contains a composite USB device with a HID touchpad and HID keyboard on separate intefaces.
> Since the USB Vendor ID is Synaptic's, hid-core is currently trying to bind hid-rmi to all\of
> the HID devices. This patch ensures that hid-rmi only binds to the mouse interface.
>
> related bug:
> https://bugzilla.kernel.org/show_bug.cgi?id=80091
>
> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Applied, thanks.
--
Jiri Kosina
SUSE Labs
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-07-29 9:29 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-17 23:14 [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size Andrew Duggan
2014-07-17 23:14 ` [PATCH] HID: rmi: only bind the hid-rmi driver to the mouse interface of composite USB devices Andrew Duggan
2014-07-18 13:07 ` Benjamin Tissoires
2014-07-29 9:29 ` Jiri Kosina
2014-07-18 13:03 ` [PATCH v2] HID: rmi: check that report ids exist in the report_id_hash before accessing their size Benjamin Tissoires
2014-07-29 9:29 ` Jiri Kosina
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).