From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>, Ping Cheng <pinglinux@gmail.com>,
Jason Gerecke <killertofu@gmail.com>,
Przemo Firszt <przemo@firszt.eu>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: Re: [PATCH v2 07/10] Input - wacom: handle Graphire BT tablets in wacom.ko
Date: Thu, 24 Jul 2014 12:35:09 -0700 [thread overview]
Message-ID: <20140724193509.GB26752@core.coreip.homeip.net> (raw)
In-Reply-To: <1406225645-32141-8-git-send-email-benjamin.tissoires@redhat.com>
Hi Benjamin,
On Thu, Jul 24, 2014 at 02:14:02PM -0400, Benjamin Tissoires wrote:
> First, merge the Graphire BT tablet.
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> ---
>
> changes in v2:
> - simplified because part of it has been splitted out in the previous commit.
>
> drivers/hid/hid-core.c | 1 -
> drivers/hid/hid-wacom.c | 1 -
> drivers/hid/wacom_sys.c | 42 +++++++++++++++++++++
> drivers/hid/wacom_wac.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++-
> drivers/hid/wacom_wac.h | 2 +
> 5 files changed, 140 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> index 7cff1c2..4db6804 100644
> --- a/drivers/hid/hid-core.c
> +++ b/drivers/hid/hid-core.c
> @@ -1920,7 +1920,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) },
> { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) },
> { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) },
> - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
> { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
> { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) },
> { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) },
> diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
> index 4874f4e..967c457 100644
> --- a/drivers/hid/hid-wacom.c
> +++ b/drivers/hid/hid-wacom.c
> @@ -952,7 +952,6 @@ static void wacom_remove(struct hid_device *hdev)
> }
>
> static const struct hid_device_id wacom_devices[] = {
> - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
> { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
>
> { }
> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
> index add76ec..8492177 100644
> --- a/drivers/hid/wacom_sys.c
> +++ b/drivers/hid/wacom_sys.c
> @@ -265,6 +265,48 @@ static int wacom_set_device_mode(struct hid_device *hdev, int report_id,
> static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed,
> struct wacom_features *features)
> {
> + struct wacom *wacom = hid_get_drvdata(hdev);
> + int limit, ret;
> + __u8 rep_data[2];
I think just u8 in kerneli proper.
> +
> + switch (features->type) {
> + case GRAPHIRE_BT:
> + rep_data[0] = 0x03 ; rep_data[1] = 0x00;
> + limit = 3;
> + do {
> + ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2,
> + HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
> + } while (ret < 0 && limit-- > 0);
> +
> + if (ret >= 0) {
> + if (speed == 0)
> + rep_data[0] = 0x05;
> + else
> + rep_data[0] = 0x06;
I am a fan of
rep_data[0] = speed == 0 ? 0x05 : 0x06;
as it takes 1 line vs 3.
> +
> + rep_data[1] = 0x00;
> + limit = 3;
> + do {
> + ret = hid_hw_raw_request(hdev, rep_data[0],
> + rep_data, 2, HID_FEATURE_REPORT,
> + HID_REQ_SET_REPORT);
> + } while (ret < 0 && limit-- > 0);
> +
> + if (ret >= 0) {
> + wacom->wacom_wac.bt_high_speed = speed;
> + return 0;
> + }
> + }
> +
> + /*
> + * Note that if the raw queries fail, it's not a hard failure
> + * and it is safe to continue
> + */
> + hid_warn(hdev, "failed to poke device, command %d, err %d\n",
> + rep_data[0], ret);
> + break;
> + }
> +
> return 0;
> }
>
> diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
> index 2c69326..06bc600 100644
> --- a/drivers/hid/wacom_wac.c
> +++ b/drivers/hid/wacom_wac.c
> @@ -30,6 +30,10 @@
> */
> #define WACOM_CONTACT_AREA_SCALE 2607
>
> +/*percent of battery capacity for Graphire
> + 8th value means AC online and show 100% capacity */
> +static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 };
> +
> static int wacom_penpartner_irq(struct wacom_wac *wacom)
> {
> unsigned char *data = wacom->data;
> @@ -263,11 +267,19 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
> unsigned char *data = wacom->data;
> struct input_dev *input = wacom->input;
> struct input_dev *pad_input = wacom->pad_input;
> + int battery_capacity, ps_connected;
> int prox;
> int rw = 0;
> int retval = 0;
>
> - if (data[0] != WACOM_REPORT_PENABLED) {
> + if (features->type == GRAPHIRE_BT) {
> + if (data[0] != WACOM_REPORT_PENABLED_BT) {
> + dev_dbg(input->dev.parent,
> + "%s: received unknown report #%d\n", __func__,
> + data[0]);
> + goto exit;
> + }
> + } else if (data[0] != WACOM_REPORT_PENABLED) {
> dev_dbg(input->dev.parent,
> "%s: received unknown report #%d\n", __func__, data[0]);
> goto exit;
> @@ -301,7 +313,12 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
> input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
> input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
> if (wacom->tool[0] != BTN_TOOL_MOUSE) {
> - input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8));
> + if (features->type == GRAPHIRE_BT)
> + input_report_abs(input, ABS_PRESSURE, data[6] |
> + (((__u16) (data[1] & 0x08)) << 5));
> + else
> + input_report_abs(input, ABS_PRESSURE, data[6] |
> + ((data[7] & 0x03) << 8));
> input_report_key(input, BTN_TOUCH, data[1] & 0x01);
> input_report_key(input, BTN_STYLUS, data[1] & 0x02);
> input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
> @@ -312,6 +329,23 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
> features->type == WACOM_MO) {
> input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f);
> rw = (data[7] & 0x04) - (data[7] & 0x03);
> + } else if (features->type == GRAPHIRE_BT) {
> + /* Compute distance between mouse and tablet */
> + rw = 44 - (data[6] >> 2);
> + if (rw < 0)
> + rw = 0;
> + else if (rw > 31)
> + rw = 31;
rw = clamp_val(rw, 0, 31);
?
> + input_report_abs(input, ABS_DISTANCE, rw);
> + if (((data[1] >> 5) & 3) == 2) {
> + /* Mouse with wheel */
> + input_report_key(input, BTN_MIDDLE,
> + data[1] & 0x04);
> + rw = (data[6] & 0x01) ? -1 :
> + (data[6] & 0x02) ? 1 : 0;
> + } else {
> + rw = 0;
> + }
> } else {
> input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f);
> rw = -(signed char)data[6];
> @@ -358,6 +392,31 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
> retval = 1;
> }
> break;
> + case GRAPHIRE_BT:
> + prox = data[7] & 0x03;
> + if (prox || wacom->id[1]) {
> + wacom->id[1] = PAD_DEVICE_ID;
> + input_report_key(pad_input, BTN_0, (data[7] & 0x02));
> + input_report_key(pad_input, BTN_1, (data[7] & 0x01));
> + if (!prox)
> + wacom->id[1] = 0;
> + input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
> + retval = 1;
> + }
> + break;
> + }
> +
> + /* Store current battery capacity and power supply state */
> + if (features->type == GRAPHIRE_BT) {
> + rw = (data[7] >> 2 & 0x07);
> + battery_capacity = batcap_gr[rw];
> + ps_connected = rw == 7;
> + if ((wacom->battery_capacity != battery_capacity) ||
> + (wacom->ps_connected != ps_connected)) {
> + wacom->battery_capacity = battery_capacity;
> + wacom->ps_connected = ps_connected;
> + wacom_notify_battery(wacom);
> + }
> }
> exit:
> return retval;
> @@ -1418,6 +1477,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
>
> case WACOM_G4:
> case GRAPHIRE:
> + case GRAPHIRE_BT:
> case WACOM_MO:
> sync = wacom_graphire_irq(wacom_wac);
> break;
> @@ -1654,6 +1714,27 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
> __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> break;
>
> + case GRAPHIRE_BT:
> + __clear_bit(ABS_MISC, input_dev->absbit);
> + input_set_abs_params(input_dev, ABS_DISTANCE, 0,
> + features->distance_max,
> + 0, 0);
> +
> + input_set_capability(input_dev, EV_REL, REL_WHEEL);
> +
> + __set_bit(BTN_LEFT, input_dev->keybit);
> + __set_bit(BTN_RIGHT, input_dev->keybit);
> + __set_bit(BTN_MIDDLE, input_dev->keybit);
> +
> + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
> + __set_bit(BTN_TOOL_PEN, input_dev->keybit);
> + __set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
> + __set_bit(BTN_STYLUS, input_dev->keybit);
> + __set_bit(BTN_STYLUS2, input_dev->keybit);
> +
> + __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> + break;
> +
> case WACOM_24HD:
> input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
> input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
> @@ -1848,6 +1929,11 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
> input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0);
>
> switch (features->type) {
> + case GRAPHIRE_BT:
> + __set_bit(BTN_0, input_dev->keybit);
> + __set_bit(BTN_1, input_dev->keybit);
> + break;
> +
> case WACOM_MO:
> __set_bit(BTN_BACK, input_dev->keybit);
> __set_bit(BTN_LEFT, input_dev->keybit);
> @@ -2017,6 +2103,9 @@ static const struct wacom_features wacom_features_0x00 =
> static const struct wacom_features wacom_features_0x10 =
> { "Wacom Graphire", 10206, 7422, 511, 63,
> GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
> +static const struct wacom_features wacom_features_0x81 =
> + { "Wacom Graphire BT", 16704, 12064, 511, 32,
> + GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
> static const struct wacom_features wacom_features_0x11 =
> { "Wacom Graphire2 4x5", 10206, 7422, 511, 63,
> GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
> @@ -2412,6 +2501,10 @@ static const struct wacom_features wacom_features_0x309 =
> HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
> .driver_data = (kernel_ulong_t)&wacom_features_##prod
>
> +#define BT_DEVICE_WACOM(prod) \
> + HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
> + .driver_data = (kernel_ulong_t)&wacom_features_##prod
> +
> #define USB_DEVICE_LENOVO(prod) \
> HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \
> .driver_data = (kernel_ulong_t)&wacom_features_##prod
> @@ -2469,6 +2562,7 @@ const struct hid_device_id wacom_ids[] = {
> { USB_DEVICE_WACOM(0x69) },
> { USB_DEVICE_WACOM(0x6A) },
> { USB_DEVICE_WACOM(0x6B) },
> + { BT_DEVICE_WACOM(0x81) },
> { USB_DEVICE_WACOM(0x84) },
> { USB_DEVICE_WACOM(0x90) },
> { USB_DEVICE_WACOM(0x93) },
> diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
> index 3aa55d9..0f3df34 100644
> --- a/drivers/hid/wacom_wac.h
> +++ b/drivers/hid/wacom_wac.h
> @@ -46,6 +46,7 @@
>
> /* wacom data packet report IDs */
> #define WACOM_REPORT_PENABLED 2
> +#define WACOM_REPORT_PENABLED_BT 3
> #define WACOM_REPORT_INTUOSREAD 5
> #define WACOM_REPORT_INTUOSWRITE 6
> #define WACOM_REPORT_INTUOSPAD 12
> @@ -73,6 +74,7 @@
> enum {
> PENPARTNER = 0,
> GRAPHIRE,
> + GRAPHIRE_BT,
> WACOM_G4,
> PTU,
> PL,
> --
> 2.0.1
>
--
Dmitry
next prev parent reply other threads:[~2014-07-24 19:35 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-24 18:13 [PATCH v2 00/10] Input - wacom: conversion to HID driver, series 2 Benjamin Tissoires
2014-07-24 18:13 ` [PATCH v2 01/10] Input - wacom: Support up to 2048 pressure levels with ISDv4 Benjamin Tissoires
2014-07-24 18:13 ` [PATCH v2 02/10] Input - wacom: put a flag when the led are initialized Benjamin Tissoires
2014-07-24 18:13 ` [PATCH v2 03/10] Input - wacom: enhance Wireless Receiver battery reporting Benjamin Tissoires
2014-07-24 18:13 ` [PATCH v2 04/10] Input - wacom: use a uniq name for the battery device Benjamin Tissoires
2014-07-24 18:14 ` [PATCH v2 05/10] Input - wacom: register an ac power supply for wireless devices Benjamin Tissoires
2014-07-24 18:14 ` [PATCH v2 06/10] Input - wacom: prepare the driver to include BT devices Benjamin Tissoires
2014-07-26 0:39 ` Dmitry Torokhov
2014-07-26 3:25 ` Benjamin Tissoires
2014-07-26 3:58 ` Dmitry Torokhov
2014-07-24 18:14 ` [PATCH v2 07/10] Input - wacom: handle Graphire BT tablets in wacom.ko Benjamin Tissoires
2014-07-24 19:35 ` Dmitry Torokhov [this message]
2014-07-24 19:43 ` Benjamin Tissoires
2014-07-24 19:58 ` Dmitry Torokhov
2014-07-24 20:11 ` Benjamin Tissoires
2014-07-24 18:14 ` [PATCH v2 08/10] Input - wacom: handle Intuos 4 BT " Benjamin Tissoires
2014-07-24 18:14 ` [PATCH v2 09/10] Input - wacom: add copyright note and bump version to 2.0 Benjamin Tissoires
2014-07-24 18:14 ` [PATCH v2 10/10] HID: remove hid-wacom Bluetooth driver Benjamin Tissoires
2014-07-25 12:42 ` [PATCH v2 00/10] Input - wacom: conversion to HID driver, series 2 Przemo Firszt
2014-07-25 12:58 ` Benjamin Tissoires
2014-07-25 13:30 ` Przemo Firszt
2014-07-25 14:54 ` Benjamin Tissoires
2014-07-25 19:26 ` Przemo Firszt
2014-07-25 19:32 ` Benjamin Tissoires
2014-07-25 22:13 ` Przemo Firszt
2014-07-25 23:15 ` Benjamin Tissoires
2014-07-26 11:55 ` Przemo Firszt
2014-07-25 23:20 ` [PATCH 11/10] Input - wacom: Check for bluetooth protocol while setting OLEDs Benjamin Tissoires
2014-07-26 12:05 ` Przemo Firszt
2014-07-26 1:41 ` [PATCH v2 00/10] Input - wacom: conversion to HID driver, series 2 Dmitry Torokhov
2014-07-26 3:21 ` Benjamin Tissoires
2014-07-26 3:56 ` Dmitry Torokhov
-- strict thread matches above, loose matches on Subject: below --
2014-07-24 20:43 [PATCH v2 07/10] Input - wacom: handle Graphire BT tablets in wacom.ko Ping Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140724193509.GB26752@core.coreip.homeip.net \
--to=dmitry.torokhov@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jkosina@suse.cz \
--cc=killertofu@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pinglinux@gmail.com \
--cc=przemo@firszt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).