From: Pavel Machek <pavel@ucw.cz>
To: "Pali Rohár" <pali.rohar@gmail.com>
Cc: kernel list <linux-kernel@vger.kernel.org>,
dmitry.torokhov@gmail.com, sre@kernel.org, B38611@freescale.com,
aaro.koskinen@iki.fi, jg1.han@samsung.com,
linux-input@vger.kernel.org
Subject: Re: 3.18.rc1: compile failure in tsc2005.c
Date: Thu, 23 Oct 2014 18:42:46 +0200 [thread overview]
Message-ID: <20141023164245.GA13718@amd> (raw)
In-Reply-To: <201410231501.04540@pali>
Hi!
Oops, ignore me, this is part of n900 changes that did not make it to
mainline.
> > I get this. Before I start patching it, perhaps someone has
> > fixed it already?
> >
> > CC drivers/input/touchscreen/tsc2005.o
> > drivers/input/touchscreen/tsc2005.c: In function
> > 'tsc2005_disable_store':
> > drivers/input/touchscreen/tsc2005.c:406:2: error: implicit
> > declaration of function 'strict_strtoul'
> > [-Werror=implicit-function-declaration] cc1: some warnings
> > being treated as errors
n> > scripts/Makefile.build:257: recipe for target
> > 'drivers/input/touchscreen/tsc2005.o' failed
> > make[3]: *** [drivers/input/touchscreen/tsc2005.o] Error 1
> > scripts/Makefile.build:402: recipe for target
> > 'drivers/input/touchscreen' failed
> > make[2]: *** [drivers/input/touchscreen] Error 2
> > scripts/Makefile.build:402: recipe for target 'drivers/input'
> > failed make[1]: *** [drivers/input] Error 2
> > make[1]: *** Waiting for unfinished jobs....
> > CC net/core/request_sock.o
>
> Hi, I read somewhere that strict_strtoul function was replaced by
> some kstrtol function... So maybe somebody forgot to fix tsc2005
> driver?
Yes.. there are four places in n900 patches that will need fixing.
This only applies to Pali's tree.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Pavel
commit 1f031685bd14a13242f78e7cc9cc1cd767aa3dbc
Author: Pavel <pavel@ucw.cz>
Date: Thu Oct 23 17:23:16 2014 +0200
Fix compilation by replacing strict_strtoul to kstrtoul
Signed-off-by: Pavel Machek <pavel@ucw.cz>
diff --git a/arch/arm/plat-omap/gpio-switch.c b/arch/arm/plat-omap/gpio-switch.c
index 394c45b..ceed4f3 100644
--- a/arch/arm/plat-omap/gpio-switch.c
+++ b/arch/arm/plat-omap/gpio-switch.c
@@ -197,7 +197,7 @@ static ssize_t gpio_sw_disable_store(struct device *dev,
struct gpio_switch *sw = dev_get_drvdata(dev);
unsigned long res;
- if (strict_strtoul(buf, 10, &res) < 0)
+ if (kstrtoul(buf, 10, &res) < 0)
return -EINVAL;
if (!!res == sw->disabled)
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index 422ec6e..ec1c276 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -403,7 +403,7 @@ static ssize_t tsc2005_disable_store(struct device *dev,
unsigned long val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtoul(buf, 10, &val);
if (error)
return error;
diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c
index 3a986f3..f697e5f 100644
--- a/drivers/net/wireless/ti/wl1251/main.c
+++ b/drivers/net/wireless/ti/wl1251/main.c
@@ -1506,7 +1506,7 @@ static ssize_t wl1251_sysfs_store_tx_mgmt_frm_rate(struct device *dev,
unsigned long res;
int ret;
- ret = strict_strtoul(buf, 10, &res);
+ ret = kstrtoul(buf, 10, &res);
if (ret < 0) {
wl1251_warning("incorrect value written to tx_mgmt_frm_rate");
@@ -1600,7 +1600,7 @@ static ssize_t wl1251_sysfs_store_bt_coex_mode(struct device *dev,
unsigned long res;
int ret;
- ret = strict_strtoul(buf, 10, &res);
+ ret = kstrtoul(buf, 10, &res);
if (ret < 0) {
wl1251_warning("incorrect value written to bt_coex_mode");
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
prev parent reply other threads:[~2014-10-23 16:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-23 12:53 3.18.rc1: compile failure in tsc2005.c Pavel Machek
2014-10-23 13:01 ` Pali Rohár
2014-10-23 15:47 ` Dmitry Torokhov
2014-10-23 16:07 ` Daniel Walter
2014-10-23 16:42 ` Pavel Machek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141023164245.GA13718@amd \
--to=pavel@ucw.cz \
--cc=B38611@freescale.com \
--cc=aaro.koskinen@iki.fi \
--cc=dmitry.torokhov@gmail.com \
--cc=jg1.han@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).