linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Hans de Goede <hdegoede@redhat.com>,
	linux-input@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 04/17] ARM: dts: sunxi: Add dtsi for AXP209 PMIC
Date: Tue, 6 Jan 2015 16:58:38 +0100	[thread overview]
Message-ID: <20150106155838.GS7853@lukather> (raw)
In-Reply-To: <1420511727-8242-5-git-send-email-wens@csie.org>

[-- Attachment #1: Type: text/plain, Size: 4152 bytes --]

Hi,

On Tue, Jan 06, 2015 at 10:35:14AM +0800, Chen-Yu Tsai wrote:
> The AXP209 PMIC is used with some Allwinner SoCs. This patch adds
> a dtsi file listing all the regulator nodes. The regulators are
> initialized based on their device node names.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  arch/arm/boot/dts/axp209.dtsi | 87 +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
>  create mode 100644 arch/arm/boot/dts/axp209.dtsi
> 
> diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
> new file mode 100644
> index 000000000000..3c38cbafe285
> --- /dev/null
> +++ b/arch/arm/boot/dts/axp209.dtsi
> @@ -0,0 +1,87 @@
> +/*
> + * Copyright 2015 Chen-Yu Tsai
> + *
> + * Chen-Yu Tsai <wens@csie.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + *     You should have received a copy of the GNU General Public
> + *     License along with this file; if not, write to the Free
> + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> + *     MA 02110-1301 USA
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/*
> + * AXP202/209 Integrated Power Management Chip
> + * http://www.x-powers.com/product/AXP20X.php
> + * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
> + */
> +
> +&axp209 {
> +	regulators {
> +		/* Default work frequency for buck regulators */
> +		x-powers,dcdc-freq = <1500>;
> +
> +		/* This section lists all the regulators */

I don't think this comment is necessary.

> +		reg_dcdc2: dcdc2 {
> +		};
> +
> +		reg_dcdc3: dcdc3 {
> +		};
> +
> +		reg_ldo1: ldo1 {
> +			/* LDO1 is a fixed output regulator */
> +			regulator-always-on;
> +			regulator-min-microvolt = <1300000>;
> +			regulator-max-microvolt = <1300000>;
> +		};
> +
> +		reg_ldo2: ldo2 {
> +		};
> +
> +		reg_ldo3: ldo3 {
> +		};
> +
> +		reg_ldo4: ldo4 {
> +		};
> +
> +		reg_ldo5: ldo5 {
> +		};

Some default names for the regulator would be great!

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2015-01-06 15:58 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-06  2:35 [PATCH 00/17] ARM: sunxi: Support cpufreq on sun[457]i Chen-Yu Tsai
2015-01-06  2:35 ` [PATCH 01/17] ARM: sunxi: Register cpufreq-dt for sun[45678]i Chen-Yu Tsai
2015-01-06 15:55   ` Maxime Ripard
2015-01-07  9:07     ` Chen-Yu Tsai
2015-01-07 10:01       ` Viresh Kumar
2015-01-07 10:23   ` Maxime Ripard
2015-01-06  2:35 ` [PATCH 02/17] clk: sunxi: Propagate rate changes to parent for mux clocks Chen-Yu Tsai
2015-01-06 16:00   ` Maxime Ripard
2015-01-06  2:35 ` [PATCH 03/17] Input: sun4i-ts: Add thermal zone sensor support Chen-Yu Tsai
2015-01-06 15:24   ` Eduardo Valentin
2015-01-07 16:24     ` Chen-Yu Tsai
2015-01-08 13:33       ` Chen-Yu Tsai
2015-01-09 18:07         ` Eduardo Valentin
2015-01-09 18:24           ` Chen-Yu Tsai
2015-01-06  2:35 ` [PATCH 04/17] ARM: dts: sunxi: Add dtsi for AXP209 PMIC Chen-Yu Tsai
2015-01-06 15:58   ` Maxime Ripard [this message]
2015-01-06 19:09     ` Chen-Yu Tsai
2015-01-06  2:35 ` [PATCH 05/17] ARM: dts: sunxi: Enable thermal sensor support for RTP on sun[457]i Chen-Yu Tsai
2015-01-06 15:25   ` Eduardo Valentin
2015-01-06 15:52   ` Maxime Ripard
2015-01-06  2:35 ` [PATCH 06/17] ARM: dts: sun7i: Add cpu clock reference and operating points to dtsi Chen-Yu Tsai
2015-01-06 16:07   ` Maxime Ripard
2015-01-06  2:35 ` [PATCH 07/17] ARM: dts: sun7i: Add cpu thermal zones " Chen-Yu Tsai
2015-01-06 15:28   ` Eduardo Valentin
2015-01-06  2:35 ` [PATCH 08/17] ARM: dts: sun7i: cubieboard2: add axp209 regulator nodes Chen-Yu Tsai
2015-01-06 16:11   ` Maxime Ripard
2015-01-06  2:35 ` [PATCH 09/17] ARM: dts: sun7i: cubietruck: " Chen-Yu Tsai
2015-01-06  2:35 ` [PATCH 10/17] ARM: dts: sun5i: Add cpu clock reference and operating points to dtsi Chen-Yu Tsai
2015-01-06  2:35 ` [PATCH 11/17] ARM: dts: sun5i: Add cpu thermal zones " Chen-Yu Tsai
2015-01-06 15:30   ` Eduardo Valentin
2015-01-06  2:35 ` [PATCH 12/17] ARM: dts: sun5i: hsg-h702: add axp209 regulator nodes Chen-Yu Tsai
2015-01-06  2:35 ` [PATCH 13/17] ARM: dts: sun4i: Add cpu clock reference and operating points to dtsi Chen-Yu Tsai
2015-01-06  2:35 ` [PATCH 14/17] ARM: dts: sun4i: Add cpu thermal zones " Chen-Yu Tsai
2015-01-06 15:29   ` Eduardo Valentin
2015-01-06  2:35 ` [PATCH 15/17] ARM: dts: sun4i: cubieboard: add axp209 regulator nodes Chen-Yu Tsai
2015-01-06  2:35 ` [PATCH 16/17] ARM: sunxi_defconfig: Enable TOUCHSCREEN_SUN4I, CPUFREQ_DT, CPU_THERMAL Chen-Yu Tsai
2015-01-06 15:32   ` Eduardo Valentin
2015-01-06 16:13   ` Maxime Ripard
2015-01-06  2:35 ` [PATCH 17/17] ARM: multi_v7_defconfig: Enable TOUCHSCREEN_SUN4I, CPU_THERMAL Chen-Yu Tsai
2015-01-06 15:31   ` Eduardo Valentin
2015-01-06 16:12   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150106155838.GS7853@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=edubezval@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).