linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Vishnu Patekar
	<vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
	ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
	maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v4 2/5] ARM:sunxi:drivers:input Add support for A10/A20 PS2
Date: Sat, 17 Jan 2015 14:25:29 -0800	[thread overview]
Message-ID: <20150117222529.GC38334@dtor-ws> (raw)
In-Reply-To: <1421417021-3247-3-git-send-email-vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Hi Vishnu,

On Fri, Jan 16, 2015 at 07:33:38PM +0530, Vishnu Patekar wrote:
> Signed-off-by: VishnuPatekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  drivers/input/serio/Kconfig     |   11 ++
>  drivers/input/serio/Makefile    |    1 +
>  drivers/input/serio/sun4i-ps2.c |  330 +++++++++++++++++++++++++++++++++++++++
>  3 files changed, 342 insertions(+)
>  create mode 100644 drivers/input/serio/sun4i-ps2.c
> 
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index bc2d474..964afc5 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -281,4 +281,15 @@ config HYPERV_KEYBOARD
>  	  To compile this driver as a module, choose M here: the module will
>  	  be called hyperv_keyboard.
>  
> +config SERIO_SUN4I_PS2
> +	tristate "Allwinner A10 PS/2 controller support"
> +	default n
> +	depends on ARCH_SUNXI || COMPILE_TEST
> +	help
> +	  This selects support for the PS/2 Host Controller on
> +	  Allwinner A10.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called sun4i-ps2.
> +
>  endif
> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> index 815d874..c600089 100644
> --- a/drivers/input/serio/Makefile
> +++ b/drivers/input/serio/Makefile
> @@ -29,3 +29,4 @@ obj-$(CONFIG_SERIO_ARC_PS2)	+= arc_ps2.o
>  obj-$(CONFIG_SERIO_APBPS2)	+= apbps2.o
>  obj-$(CONFIG_SERIO_OLPC_APSP)	+= olpc_apsp.o
>  obj-$(CONFIG_HYPERV_KEYBOARD)	+= hyperv-keyboard.o
> +obj-$(CONFIG_SERIO_SUN4I_PS2)	+= sun4i-ps2.o
> diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
> new file mode 100644
> index 0000000..06b3fef
> --- /dev/null
> +++ b/drivers/input/serio/sun4i-ps2.c
> @@ -0,0 +1,330 @@
> +/*
> + *	Driver for Allwinner A10 PS2 host controller
> + *
> + *	Author: Vishnu Patekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> + *		Aaron.maoye <leafy.myeh-Q9AEpCAkrSgqDJ6do+/SaQ@public.gmane.org>
> + *
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/serio.h>
> +#include <linux/interrupt.h>
> +#include <linux/errno.h>
> +#include <linux/slab.h>
> +#include <linux/list.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +
> +#define DRIVER_NAME		"sun4i-ps2"
> +
> +/* register offset definitions */
> +#define PS2_REG_GCTL		0x00	/*  PS2 Module Global Control Reg */
> +#define PS2_REG_DATA		0x04	/*  PS2 Module Data Reg		*/
> +#define PS2_REG_LCTL		0x08	/*  PS2 Module Line Control Reg */
> +#define PS2_REG_LSTS		0x0C	/*  PS2 Module Line Status Reg	*/
> +#define PS2_REG_FCTL		0x10	/*  PS2 Module FIFO Control Reg */
> +#define PS2_REG_FSTS		0x14	/*  PS2 Module FIFO Status Reg	*/
> +#define PS2_REG_CLKDR		0x18	/*  PS2 Module Clock Divider Reg*/
> +
> +/*  PS2 GLOBAL CONTROL REGISTER PS2_GCTL */
> +#define PS2_GCTL_INTFLAG	BIT(4)
> +#define PS2_GCTL_INTEN		BIT(3)
> +#define PS2_GCTL_RESET		BIT(2)
> +#define PS2_GCTL_MASTER		BIT(1)
> +#define PS2_GCTL_BUSEN		BIT(0)
> +
> +/* PS2 LINE CONTROL REGISTER */
> +#define PS2_LCTL_NOACK		BIT(18)
> +#define PS2_LCTL_TXDTOEN	BIT(8)
> +#define PS2_LCTL_STOPERREN	BIT(3)
> +#define PS2_LCTL_ACKERREN	BIT(2)
> +#define PS2_LCTL_PARERREN	BIT(1)
> +#define PS2_LCTL_RXDTOEN	BIT(0)
> +
> +/* PS2 LINE STATUS REGISTER */
> +#define PS2_LSTS_TXTDO		BIT(8)
> +#define PS2_LSTS_STOPERR	BIT(3)
> +#define PS2_LSTS_ACKERR		BIT(2)
> +#define PS2_LSTS_PARERR		BIT(1)
> +#define PS2_LSTS_RXTDO		BIT(0)
> +
> +#define PS2_LINE_ERROR_BIT \
> +	(PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR | \
> +	PS2_LSTS_PARERR | PS2_LSTS_RXTDO)
> +
> +/* PS2 FIFO CONTROL REGISTER */
> +#define PS2_FCTL_TXRST		BIT(17)
> +#define PS2_FCTL_RXRST		BIT(16)
> +#define PS2_FCTL_TXUFIEN	BIT(10)
> +#define PS2_FCTL_TXOFIEN	BIT(9)
> +#define PS2_FCTL_TXRDYIEN	BIT(8)
> +#define PS2_FCTL_RXUFIEN	BIT(2)
> +#define PS2_FCTL_RXOFIEN	BIT(1)
> +#define PS2_FCTL_RXRDYIEN	BIT(0)
> +
> +/* PS2 FIFO STATUS REGISTER */
> +#define PS2_FSTS_TXUF		BIT(10)
> +#define PS2_FSTS_TXOF		BIT(9)
> +#define PS2_FSTS_TXRDY		BIT(8)
> +#define PS2_FSTS_RXUF		BIT(2)
> +#define PS2_FSTS_RXOF		BIT(1)
> +#define PS2_FSTS_RXRDY		BIT(0)
> +
> +#define PS2_FIFO_ERROR_BIT \
> +	(PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_RXUF | PS2_FSTS_RXOF)
> +
> +#define PS2_SAMPLE_CLK		1000000
> +#define PS2_SCLK		125000
> +
> +struct sun4i_ps2data {
> +	struct serio *serio;
> +	struct device *dev;
> +
> +	/* IO mapping base */
> +	void __iomem	*reg_base;
> +
> +	/* clock management */
> +	struct clk	*clk;
> +
> +	/* irq */
> +	spinlock_t	lock;
> +	int		irq;
> +};
> +
> +/*********************/
> +/* Interrupt handler */
> +/*********************/
> +static irqreturn_t sun4i_ps2_interrupt(int irq, void *dev_id)
> +{
> +	struct sun4i_ps2data *drvdata = dev_id;
> +	u32 intr_status;
> +	u32 fifo_status;
> +	unsigned char byte;
> +	unsigned int rxflags = 0;
> +	u32 rval;
> +
> +	spin_lock(&drvdata->lock);
> +
> +	/* Get the PS/2 interrupts and clear them */
> +	intr_status  = readl(drvdata->reg_base + PS2_REG_LSTS);
> +	fifo_status  = readl(drvdata->reg_base + PS2_REG_FSTS);
> +
> +	/*Check Line Status Register*/
> +	if (intr_status & PS2_LINE_ERROR_BIT) {
> +		rxflags = (intr_status & PS2_LINE_ERROR_BIT) ? SERIO_FRAME : 0;
> +		rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_PARITY : 0;
> +		rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_TIMEOUT : 0;
> +
> +		rval = PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR |
> +			PS2_LSTS_PARERR | PS2_LSTS_RXTDO;
> +		writel(rval, drvdata->reg_base + PS2_REG_LSTS);
> +	}
> +
> +	/*Check FIFO Status Register*/
> +	if (fifo_status & PS2_FIFO_ERROR_BIT) {
> +		rval = PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_TXRDY |
> +			PS2_FSTS_RXUF | PS2_FSTS_RXOF | PS2_FSTS_RXRDY;
> +		writel(rval, drvdata->reg_base + PS2_REG_FSTS);
> +	}
> +
> +	rval = (fifo_status >> 16) & 0x3;
> +	while (rval--) {
> +		byte = readl(drvdata->reg_base + PS2_REG_DATA) & 0xff;
> +		serio_interrupt(drvdata->serio, byte, rxflags);
> +	}
> +
> +	writel(intr_status, drvdata->reg_base + PS2_REG_LSTS);
> +	writel(fifo_status, drvdata->reg_base + PS2_REG_FSTS);
> +
> +	spin_unlock(&drvdata->lock);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +
> +static int sun4i_ps2_open(struct serio *pserio)
> +{
> +	struct sun4i_ps2data *drvdata = pserio->port_data;
> +	u32 src_clk = 0;
> +	u32 clk_scdf;
> +	u32 clk_pcdf;
> +	u32 rval;
> +	unsigned long flags;
> +
> +	/*Set Line Control And Enable Interrupt*/
> +	rval = PS2_LCTL_STOPERREN | PS2_LCTL_ACKERREN
> +		| PS2_LCTL_PARERREN | PS2_LCTL_RXDTOEN;
> +	writel(rval, drvdata->reg_base + PS2_REG_LCTL);
> +
> +	/*Reset FIFO*/
> +	rval = PS2_FCTL_TXRST | PS2_FCTL_RXRST | PS2_FCTL_TXUFIEN
> +		| PS2_FCTL_TXOFIEN | PS2_FCTL_RXUFIEN
> +		| PS2_FCTL_RXOFIEN | PS2_FCTL_RXRDYIEN;
> +
> +	writel(rval, drvdata->reg_base + PS2_REG_FCTL);
> +
> +	src_clk = clk_get_rate(drvdata->clk);
> +	/*Set Clock Divider Register*/
> +	clk_scdf = src_clk / PS2_SAMPLE_CLK - 1;
> +	clk_pcdf = PS2_SAMPLE_CLK / PS2_SCLK - 1;
> +	rval = (clk_scdf<<8) | clk_pcdf;
> +	writel(rval, drvdata->reg_base + PS2_REG_CLKDR);
> +
> +
> +	/*Set Global Control Register*/
> +	rval = PS2_GCTL_RESET | PS2_GCTL_INTEN | PS2_GCTL_MASTER
> +		| PS2_GCTL_BUSEN;
> +
> +	spin_lock_irqsave(&drvdata->lock, flags);
> +	writel(rval, drvdata->reg_base + PS2_REG_GCTL);
> +	spin_unlock_irqrestore(&drvdata->lock, flags);
> +
> +	return 0;
> +}
> +
> +static void sun4i_ps2_close(struct serio *pserio)
> +{
> +	struct sun4i_ps2data *drvdata = pserio->port_data;
> +
> +	synchronize_irq(drvdata->irq);

synchronize_irq() on it's own is not very useful. You also need to shut
off interrupts on the chip (I suppose by clearing PS2_GCTL_INTEN?)
before calling synchronize_irq.

> +}
> +
> +static int sun4i_ps2_write(struct serio *pserio, unsigned char val)
> +{
> +	unsigned long expire = jiffies + msecs_to_jiffies(10000);
> +	struct sun4i_ps2data *drvdata;
> +
> +	drvdata = (struct sun4i_ps2data *)pserio->port_data;
> +
> +	do {
> +		if (readl(drvdata->reg_base + PS2_REG_FSTS) & PS2_FSTS_TXRDY) {
> +			writel(val, drvdata->reg_base + PS2_REG_DATA);
> +			return 0;
> +		}
> +	} while (time_before(jiffies, expire));
> +
> +	return SERIO_TIMEOUT;
> +}
> +
> +static int sun4i_ps2_probe(struct platform_device *pdev)
> +{
> +	struct resource *res; /* IO mem resources */
> +	struct sun4i_ps2data *drvdata;
> +	struct serio *serio;
> +	struct device *dev = &pdev->dev;
> +	unsigned int irq;
> +	int error;
> +
> +	drvdata = devm_kzalloc(dev, sizeof(struct sun4i_ps2data), GFP_KERNEL);
> +	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
> +	if (!drvdata || !serio) {
> +		error = -ENOMEM;
> +		goto err_free_mem;
> +	}
> +
> +	spin_lock_init(&drvdata->lock);
> +
> +	/* IO */
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	drvdata->reg_base = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(drvdata->reg_base)) {
> +		dev_err(dev, "failed to map registers\n");
> +		error = PTR_ERR(drvdata->reg_base);
> +		goto err_free_mem;
> +	}
> +
> +	drvdata->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(drvdata->clk)) {
> +		error = PTR_ERR(drvdata->clk);
> +		dev_err(dev, "couldn't get clock %d\n", error);
> +		goto err_free_mem;
> +	}
> +
> +	error = clk_prepare_enable(drvdata->clk);
> +	if (error) {
> +		dev_err(dev, "failed to enable clock %d\n", error);
> +		goto err_free_mem;
> +	}
> +
> +	serio->id.type = SERIO_8042;
> +	serio->write = sun4i_ps2_write;
> +	serio->open = sun4i_ps2_open;
> +	serio->close = sun4i_ps2_close;
> +	serio->port_data = drvdata;
> +	serio->dev.parent = dev;
> +	strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
> +	strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
> +
> +	/* Get IRQ for the device */
> +	irq = platform_get_irq(pdev, 0);
> +	if (!irq) {
> +		dev_err(dev, "no IRQ found\n");
> +		error = -ENXIO;
> +		goto error_disable_clk;
> +	}
> +
> +	drvdata->irq = irq;
> +	drvdata->serio = serio;
> +	drvdata->dev = dev;
> +	error = devm_request_threaded_irq(dev, drvdata->irq,
> +		sun4i_ps2_interrupt, NULL, 0, DRIVER_NAME, drvdata);
> +
> +	if (error) {
> +		dev_err(drvdata->dev, "Interrupt alloc failed %d:error:%d\n",
> +			drvdata->irq, error);
> +		goto error_disable_clk;
> +	}
> +
> +	serio_register_port(serio);
> +	platform_set_drvdata(pdev, drvdata);
> +
> +	return 0;	/* success */
> +
> +error_disable_clk:
> +	clk_disable_unprepare(drvdata->clk);
> +
> +err_free_mem:
> +	kfree(serio);
> +	return error;
> +}
> +
> +static int sun4i_ps2_remove(struct platform_device *pdev)
> +{
> +	struct sun4i_ps2data *drvdata = platform_get_drvdata(pdev);
> +
> +	serio_unregister_port(drvdata->serio);
> +
> +	if (!IS_ERR(drvdata->clk))
> +		clk_disable_unprepare(drvdata->clk);
> +	kfree(drvdata->serio);

Serio is refcounted, you do not free it after its has been registered.
Overall I'd rather you did not use devm* interfaces here since you are
forced to mix managed and manually freed resources.

> +
> +	return 0;
> +}
> +
> +static const struct of_device_id sun4i_ps2_match[] = {
> +	{ .compatible = "allwinner,sun4i-a10-ps2", },
> +	{ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, sun4i_ps2_match);
> +
> +static struct platform_driver sun4i_ps2_driver = {
> +	.probe		= sun4i_ps2_probe,
> +	.remove		= sun4i_ps2_remove,
> +	.driver = {
> +		.name = DRIVER_NAME,
> +		.of_match_table = sun4i_ps2_match,
> +	},
> +};
> +module_platform_driver(sun4i_ps2_driver);
> +
> +MODULE_AUTHOR("Vishnu Patekar <vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
> +MODULE_AUTHOR("Aaron.maoye <leafy.myeh-Q9AEpCAkrSgqDJ6do+/SaQ@public.gmane.org>");
> +MODULE_DESCRIPTION("Allwinner A10/Sun4i PS/2 driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 1.7.9.5
> 

Thanks.

-- 
Dmitry

  parent reply	other threads:[~2015-01-17 22:25 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-16 14:03 [PATCH v4 0/5] ARM:sunxi:ps2 Added support for A10/A20 ps2 controller Vishnu Patekar
     [not found] ` <1421417021-3247-1-git-send-email-vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-16 14:03   ` [PATCH v4 1/5] sunxi:dts-bindings:input: bindings for A10/A20 ps2 Vishnu Patekar
2015-01-16 14:03   ` [PATCH v4 2/5] ARM:sunxi:drivers:input Add support for A10/A20 PS2 Vishnu Patekar
     [not found]     ` <1421417021-3247-3-git-send-email-vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-17 22:25       ` Dmitry Torokhov [this message]
2015-01-19  6:07         ` Vishnu Patekar
     [not found]           ` <CAEzqOZtOBOdpdUHvRqqf+d5GoR_8gpumZX9hfFntXDOzNog+mQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-20  0:35             ` Dmitry Torokhov
2015-01-21 11:22               ` [linux-sunxi] " Vishnu Patekar
     [not found]                 ` <CAEzqOZtdhOf7xipW8MmojZn+F6i045+=2xC0TPqt3jonmEGL5w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-22 20:07                   ` Dmitry Torokhov
2015-01-16 14:03   ` [PATCH v4 3/5] ARM: sunxi: dts: Add PS2 nodes to dtsi for A10 and A20 Vishnu Patekar
     [not found]     ` <1421417021-3247-4-git-send-email-vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-20 20:02       ` Maxime Ripard
2015-01-21 11:10         ` Vishnu Patekar
2015-01-22 15:50           ` Maxime Ripard
2015-01-16 14:03   ` [PATCH v4 4/5] ARM: sunxi: dts: Add A10/A20 PS2 pin muxing options Vishnu Patekar
     [not found]     ` <1421417021-3247-5-git-send-email-vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-20 20:03       ` Maxime Ripard
2015-01-16 14:03   ` [PATCH v4 5/5] ARM: sunxi: dts: Add PS2 nodes for A20 lime2 board Vishnu Patekar
     [not found]     ` <1421417021-3247-6-git-send-email-vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-20 17:02       ` Iain Paton
     [not found]         ` <54BE8A0E.30604-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-01-20 20:07           ` Maxime Ripard
2015-01-21 11:04             ` Vishnu Patekar
     [not found]               ` <CAEzqOZsWYQ+Aep6HBZXVtKGEJgKYAKJU2b0=nGvP0jPKECxn7g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-21 12:23                 ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150117222529.GC38334@dtor-ws \
    --to=dmitry.torokhov-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=vishnupatekar0510-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).