From: Lee Jones <lee.jones@linaro.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org
Subject: Re: [PATCH 1/2] input: keypad: tc3589x: localize platform data
Date: Fri, 27 Mar 2015 11:52:57 +0000 [thread overview]
Message-ID: <20150327115257.GD15988@x1> (raw)
In-Reply-To: <1426776765-18812-2-git-send-email-linus.walleij@linaro.org>
On Thu, 19 Mar 2015, Linus Walleij wrote:
> This driver can only get its platform data from the device tree,
> and all platforms using it does that. Localize the platform data
> for the keypad. A later patch will enforce the device tree / OF
> dependence.
>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Dmitry it would be great if you could ACK this patch so Lee can
> take it with the other patch through MFD.
> ---
> drivers/input/keyboard/tc3589x-keypad.c | 49 ++++++++++++++++++++++-----------
> include/linux/mfd/tc3589x.h | 23 ----------------
> 2 files changed, 33 insertions(+), 39 deletions(-)
Applied, thanks.
> diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
> index 563932500ff1..0ccc7de9b59d 100644
> --- a/drivers/input/keyboard/tc3589x-keypad.c
> +++ b/drivers/input/keyboard/tc3589x-keypad.c
> @@ -70,6 +70,28 @@
> #define TC3589x_KBD_INT_CLR 0x1
>
> /**
> + * struct tc35893_keypad_platform_data - platform specific keypad data
> + * @keymap_data: matrix scan code table for keycodes
> + * @krow: mask for available rows, value is 0xFF
> + * @kcol: mask for available columns, value is 0xFF
> + * @debounce_period: platform specific debounce time
> + * @settle_time: platform specific settle down time
> + * @irqtype: type of interrupt, falling or rising edge
> + * @enable_wakeup: specifies if keypad event can wake up system from sleep
> + * @no_autorepeat: flag for auto repetition
> + */
> +struct tc3589x_keypad_platform_data {
> + const struct matrix_keymap_data *keymap_data;
> + u8 krow;
> + u8 kcol;
> + u8 debounce_period;
> + u8 settle_time;
> + unsigned long irqtype;
> + bool enable_wakeup;
> + bool no_autorepeat;
> +};
> +
> +/**
> * struct tc_keypad - data structure used by keypad driver
> * @tc3589x: pointer to tc35893
> * @input: pointer to input device object
> @@ -360,23 +382,19 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
> struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
> struct tc_keypad *keypad;
> struct input_dev *input;
> - const struct tc3589x_keypad_platform_data *plat;
> int error, irq;
>
> - plat = tc3589x->pdata->keypad;
> - if (!plat) {
> - plat = tc3589x_keypad_of_probe(&pdev->dev);
> - if (IS_ERR(plat)) {
> - dev_err(&pdev->dev, "invalid keypad platform data\n");
> - return PTR_ERR(plat);
> - }
> - }
> -
> irq = platform_get_irq(pdev, 0);
> if (irq < 0)
> return irq;
>
> keypad = kzalloc(sizeof(struct tc_keypad), GFP_KERNEL);
> + keypad->board = tc3589x_keypad_of_probe(&pdev->dev);
> + if (IS_ERR(keypad->board)) {
> + dev_err(&pdev->dev, "invalid keypad platform data\n");
> + return PTR_ERR(keypad->board);
> + }
> +
> input = input_allocate_device();
> if (!keypad || !input) {
> dev_err(&pdev->dev, "failed to allocate keypad memory\n");
> @@ -384,7 +402,6 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
> goto err_free_mem;
> }
>
> - keypad->board = plat;
> keypad->input = input;
> keypad->tc3589x = tc3589x;
>
> @@ -395,7 +412,7 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
> input->open = tc3589x_keypad_open;
> input->close = tc3589x_keypad_close;
>
> - error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
> + error = matrix_keypad_build_keymap(keypad->board->keymap_data, NULL,
> TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
> NULL, input);
> if (error) {
> @@ -406,13 +423,13 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
> keypad->keymap = input->keycode;
>
> input_set_capability(input, EV_MSC, MSC_SCAN);
> - if (!plat->no_autorepeat)
> + if (!keypad->board->no_autorepeat)
> __set_bit(EV_REP, input->evbit);
>
> input_set_drvdata(input, keypad);
>
> error = request_threaded_irq(irq, NULL, tc3589x_keypad_irq,
> - plat->irqtype | IRQF_ONESHOT,
> + keypad->board->irqtype | IRQF_ONESHOT,
> "tc3589x-keypad", keypad);
> if (error < 0) {
> dev_err(&pdev->dev,
> @@ -428,8 +445,8 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
> }
>
> /* let platform decide if keypad is a wakeup source or not */
> - device_init_wakeup(&pdev->dev, plat->enable_wakeup);
> - device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup);
> + device_init_wakeup(&pdev->dev, keypad->board->enable_wakeup);
> + device_set_wakeup_capable(&pdev->dev, keypad->board->enable_wakeup);
>
> platform_set_drvdata(pdev, keypad);
>
> diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
> index c203c9c56776..468c31a27fcf 100644
> --- a/include/linux/mfd/tc3589x.h
> +++ b/include/linux/mfd/tc3589x.h
> @@ -140,36 +140,13 @@ extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
> #define TC_KPD_DEBOUNCE_PERIOD 0xA3
> #define TC_KPD_SETTLE_TIME 0xA3
>
> -/**
> - * struct tc35893_platform_data - data structure for platform specific data
> - * @keymap_data: matrix scan code table for keycodes
> - * @krow: mask for available rows, value is 0xFF
> - * @kcol: mask for available columns, value is 0xFF
> - * @debounce_period: platform specific debounce time
> - * @settle_time: platform specific settle down time
> - * @irqtype: type of interrupt, falling or rising edge
> - * @enable_wakeup: specifies if keypad event can wake up system from sleep
> - * @no_autorepeat: flag for auto repetition
> - */
> -struct tc3589x_keypad_platform_data {
> - const struct matrix_keymap_data *keymap_data;
> - u8 krow;
> - u8 kcol;
> - u8 debounce_period;
> - u8 settle_time;
> - unsigned long irqtype;
> - bool enable_wakeup;
> - bool no_autorepeat;
> -};
>
> /**
> * struct tc3589x_platform_data - TC3589x platform data
> * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
> - * @keypad: keypad-specific platform data
> */
> struct tc3589x_platform_data {
> unsigned int block;
> - const struct tc3589x_keypad_platform_data *keypad;
> };
>
> #endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-03-27 11:53 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-19 14:52 [PATCH 0/2] tc3589x OF only enforcement Linus Walleij
2015-03-19 14:52 ` [PATCH 1/2] input: keypad: tc3589x: localize platform data Linus Walleij
2015-03-19 16:38 ` Dmitry Torokhov
2015-03-27 16:47 ` Dmitry Torokhov
2015-03-30 7:08 ` Lee Jones
2015-04-07 13:07 ` Linus Walleij
2015-03-27 11:52 ` Lee Jones [this message]
2015-03-19 14:52 ` [PATCH 2/2] mfd: tc3589x: enforce device-tree only mode Linus Walleij
2015-03-19 17:00 ` Dmitry Torokhov
2015-03-20 8:21 ` Lee Jones
2015-03-27 11:53 ` Lee Jones
2015-03-27 9:04 ` [PATCH 0/2] tc3589x OF only enforcement Linus Walleij
2015-03-27 12:00 ` Lee Jones
2015-03-27 16:48 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150327115257.GD15988@x1 \
--to=lee.jones@linaro.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).