From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>,
Sebastian Reichel <sre@kernel.org>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: Re: [PATCH v2 5/9] extcon/input/mfd/regulator: max77843: Switch to common max77693 state container
Date: Tue, 26 May 2015 10:46:49 -0700 [thread overview]
Message-ID: <20150526174649.GD10571@dtor-ws> (raw)
In-Reply-To: <1432446213-4886-6-git-send-email-k.kozlowski.k@gmail.com>
On Sun, May 24, 2015 at 02:43:29PM +0900, Krzysztof Kozlowski wrote:
> Switch to the same definition of state container as in MAX77693 drivers.
> This will allow usage of one regulator driver in both devices: MAX77693
> and MAX77843.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
For input:
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/extcon/extcon-max77843.c | 17 +++++++++--------
> drivers/input/misc/max77843-haptic.c | 3 ++-
> drivers/mfd/max77843.c | 20 +++++++++++---------
> drivers/regulator/max77843.c | 6 ++++--
> include/linux/mfd/max77693-common.h | 5 +++++
> include/linux/mfd/max77843-private.h | 20 --------------------
> 6 files changed, 31 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c
> index d78a64d7fc20..0f5910dcccb7 100644
> --- a/drivers/extcon/extcon-max77843.c
> +++ b/drivers/extcon/extcon-max77843.c
> @@ -16,6 +16,7 @@
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> #include <linux/mfd/max77843-private.h>
> +#include <linux/mfd/max77693-common.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/workqueue.h>
> @@ -32,7 +33,7 @@ enum max77843_muic_status {
>
> struct max77843_muic_info {
> struct device *dev;
> - struct max77843 *max77843;
> + struct max77693_dev *max77843;
> struct extcon_dev *edev;
>
> struct mutex mutex;
> @@ -198,7 +199,7 @@ static const struct regmap_irq_chip max77843_muic_irq_chip = {
> static int max77843_muic_set_path(struct max77843_muic_info *info,
> u8 val, bool attached)
> {
> - struct max77843 *max77843 = info->max77843;
> + struct max77693_dev *max77843 = info->max77843;
> int ret = 0;
> unsigned int ctrl1, ctrl2;
>
> @@ -539,7 +540,7 @@ static void max77843_muic_irq_work(struct work_struct *work)
> {
> struct max77843_muic_info *info = container_of(work,
> struct max77843_muic_info, irq_work);
> - struct max77843 *max77843 = info->max77843;
> + struct max77693_dev *max77843 = info->max77843;
> int ret = 0;
>
> mutex_lock(&info->mutex);
> @@ -615,7 +616,7 @@ static void max77843_muic_detect_cable_wq(struct work_struct *work)
> {
> struct max77843_muic_info *info = container_of(to_delayed_work(work),
> struct max77843_muic_info, wq_detcable);
> - struct max77843 *max77843 = info->max77843;
> + struct max77693_dev *max77843 = info->max77843;
> int chg_type, adc, ret;
> bool attached;
>
> @@ -656,7 +657,7 @@ err_cable_wq:
> static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
> enum max77843_muic_adc_debounce_time time)
> {
> - struct max77843 *max77843 = info->max77843;
> + struct max77693_dev *max77843 = info->max77843;
> int ret;
>
> switch (time) {
> @@ -681,7 +682,7 @@ static int max77843_muic_set_debounce_time(struct max77843_muic_info *info,
> return 0;
> }
>
> -static int max77843_init_muic_regmap(struct max77843 *max77843)
> +static int max77843_init_muic_regmap(struct max77693_dev *max77843)
> {
> int ret;
>
> @@ -720,7 +721,7 @@ err_muic_i2c:
>
> static int max77843_muic_probe(struct platform_device *pdev)
> {
> - struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
> + struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
> struct max77843_muic_info *info;
> unsigned int id;
> int i, ret;
> @@ -821,7 +822,7 @@ err_muic_irq:
> static int max77843_muic_remove(struct platform_device *pdev)
> {
> struct max77843_muic_info *info = platform_get_drvdata(pdev);
> - struct max77843 *max77843 = info->max77843;
> + struct max77693_dev *max77843 = info->max77843;
>
> cancel_work_sync(&info->irq_work);
> regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic);
> diff --git a/drivers/input/misc/max77843-haptic.c b/drivers/input/misc/max77843-haptic.c
> index dccbb465a055..92583dcc808b 100644
> --- a/drivers/input/misc/max77843-haptic.c
> +++ b/drivers/input/misc/max77843-haptic.c
> @@ -15,6 +15,7 @@
> #include <linux/init.h>
> #include <linux/input.h>
> #include <linux/mfd/max77843-private.h>
> +#include <linux/mfd/max77693-common.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/pwm.h>
> @@ -243,7 +244,7 @@ static void max77843_haptic_close(struct input_dev *dev)
>
> static int max77843_haptic_probe(struct platform_device *pdev)
> {
> - struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
> + struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
> struct max77843_haptic *haptic;
> int error;
>
> diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
> index a354ac677ec7..d4ce1303edf7 100644
> --- a/drivers/mfd/max77843.c
> +++ b/drivers/mfd/max77843.c
> @@ -18,6 +18,7 @@
> #include <linux/module.h>
> #include <linux/mfd/core.h>
> #include <linux/mfd/max77843-private.h>
> +#include <linux/mfd/max77693-common.h>
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
>
> @@ -71,7 +72,7 @@ static const struct regmap_irq_chip max77843_irq_chip = {
> };
>
> /* Charger and Charger regulator use same regmap. */
> -static int max77843_chg_init(struct max77843 *max77843)
> +static int max77843_chg_init(struct max77693_dev *max77843)
> {
> int ret;
>
> @@ -101,7 +102,7 @@ err_chg_i2c:
> static int max77843_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id)
> {
> - struct max77843 *max77843;
> + struct max77693_dev *max77843;
> unsigned int reg_data;
> int ret;
>
> @@ -113,6 +114,7 @@ static int max77843_probe(struct i2c_client *i2c,
> max77843->dev = &i2c->dev;
> max77843->i2c = i2c;
> max77843->irq = i2c->irq;
> + max77843->type = id->driver_data;
>
> max77843->regmap = devm_regmap_init_i2c(i2c,
> &max77843_regmap_config);
> @@ -123,7 +125,7 @@ static int max77843_probe(struct i2c_client *i2c,
>
> ret = regmap_add_irq_chip(max77843->regmap, max77843->irq,
> IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED,
> - 0, &max77843_irq_chip, &max77843->irq_data);
> + 0, &max77843_irq_chip, &max77843->irq_data_topsys);
> if (ret) {
> dev_err(&i2c->dev, "Failed to add TOPSYS IRQ chip\n");
> return ret;
> @@ -164,18 +166,18 @@ static int max77843_probe(struct i2c_client *i2c,
> return 0;
>
> err_pmic_id:
> - regmap_del_irq_chip(max77843->irq, max77843->irq_data);
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys);
>
> return ret;
> }
>
> static int max77843_remove(struct i2c_client *i2c)
> {
> - struct max77843 *max77843 = i2c_get_clientdata(i2c);
> + struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
>
> mfd_remove_devices(max77843->dev);
>
> - regmap_del_irq_chip(max77843->irq, max77843->irq_data);
> + regmap_del_irq_chip(max77843->irq, max77843->irq_data_topsys);
>
> i2c_unregister_device(max77843->i2c_chg);
>
> @@ -188,7 +190,7 @@ static const struct of_device_id max77843_dt_match[] = {
> };
>
> static const struct i2c_device_id max77843_id[] = {
> - { "max77843", },
> + { "max77843", TYPE_MAX77843, },
> { },
> };
> MODULE_DEVICE_TABLE(i2c, max77843_id);
> @@ -196,7 +198,7 @@ MODULE_DEVICE_TABLE(i2c, max77843_id);
> static int __maybe_unused max77843_suspend(struct device *dev)
> {
> struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> - struct max77843 *max77843 = i2c_get_clientdata(i2c);
> + struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
>
> disable_irq(max77843->irq);
> if (device_may_wakeup(dev))
> @@ -208,7 +210,7 @@ static int __maybe_unused max77843_suspend(struct device *dev)
> static int __maybe_unused max77843_resume(struct device *dev)
> {
> struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
> - struct max77843 *max77843 = i2c_get_clientdata(i2c);
> + struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
>
> if (device_may_wakeup(dev))
> disable_irq_wake(max77843->irq);
> diff --git a/drivers/regulator/max77843.c b/drivers/regulator/max77843.c
> index f4fd0d3cfa6e..93507c3aff23 100644
> --- a/drivers/regulator/max77843.c
> +++ b/drivers/regulator/max77843.c
> @@ -16,6 +16,7 @@
> #include <linux/regulator/driver.h>
> #include <linux/regulator/machine.h>
> #include <linux/mfd/max77843-private.h>
> +#include <linux/mfd/max77693-common.h>
> #include <linux/regulator/of_regulator.h>
>
> enum max77843_regulator_type {
> @@ -130,7 +131,8 @@ static const struct regulator_desc max77843_supported_regulators[] = {
> },
> };
>
> -static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
> +static struct regmap *max77843_get_regmap(struct max77693_dev *max77843,
> + int reg_id)
> {
> switch (reg_id) {
> case MAX77843_SAFEOUT1:
> @@ -145,7 +147,7 @@ static struct regmap *max77843_get_regmap(struct max77843 *max77843, int reg_id)
>
> static int max77843_regulator_probe(struct platform_device *pdev)
> {
> - struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
> + struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent);
> struct regulator_config config = {};
> int i;
>
> diff --git a/include/linux/mfd/max77693-common.h b/include/linux/mfd/max77693-common.h
> index 7da4cc38e982..095b121aa725 100644
> --- a/include/linux/mfd/max77693-common.h
> +++ b/include/linux/mfd/max77693-common.h
> @@ -15,6 +15,9 @@
> enum max77693_types {
> TYPE_MAX77693_UNKNOWN,
> TYPE_MAX77693,
> + TYPE_MAX77843,
> +
> + TYPE_MAX77693_NUM,
> };
>
> /*
> @@ -25,12 +28,14 @@ struct max77693_dev {
> struct i2c_client *i2c; /* 0xCC , PMIC, Charger, Flash LED */
> struct i2c_client *i2c_muic; /* 0x4A , MUIC */
> struct i2c_client *i2c_haptic; /* MAX77693: 0x90 , Haptic */
> + struct i2c_client *i2c_chg; /* MAX77843: 0xD2, Charger */
>
> enum max77693_types type;
>
> struct regmap *regmap;
> struct regmap *regmap_muic;
> struct regmap *regmap_haptic; /* Only MAX77693 */
> + struct regmap *regmap_chg; /* Only MAX77843 */
>
> struct regmap_irq_chip_data *irq_data_led;
> struct regmap_irq_chip_data *irq_data_topsys;
> diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h
> index 7178ace8379e..0121d9440340 100644
> --- a/include/linux/mfd/max77843-private.h
> +++ b/include/linux/mfd/max77843-private.h
> @@ -431,24 +431,4 @@ enum max77843_irq_muic {
> #define MAX77843_REG_SAFEOUTCTRL_SAFEOUT2_MASK \
> (0x3 << SAFEOUTCTRL_SAFEOUT2_SHIFT)
>
> -struct max77843 {
> - struct device *dev;
> -
> - struct i2c_client *i2c;
> - struct i2c_client *i2c_chg;
> - struct i2c_client *i2c_fuel;
> - struct i2c_client *i2c_muic;
> -
> - struct regmap *regmap;
> - struct regmap *regmap_chg;
> - struct regmap *regmap_fuel;
> - struct regmap *regmap_muic;
> -
> - struct regmap_irq_chip_data *irq_data;
> - struct regmap_irq_chip_data *irq_data_chg;
> - struct regmap_irq_chip_data *irq_data_fuel;
> - struct regmap_irq_chip_data *irq_data_muic;
> -
> - int irq;
> -};
> #endif /* __MAX77843_H__ */
> --
> 2.1.4
>
--
Dmitry
next prev parent reply other threads:[~2015-05-26 17:46 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-24 5:43 [PATCH v2 0/9] regulator/power/mfd/input/extcon: Merge max77843 into max77693 Krzysztof Kozlowski
2015-05-24 5:43 ` [PATCH v2 1/9] mfd/extcon: max77693: Remove unused extern declarations and max77693_dev members Krzysztof Kozlowski
2015-05-24 5:43 ` [PATCH v2 2/9] mfd: max77693: Store I2C device type as enum and add default unknown Krzysztof Kozlowski
2015-05-27 10:23 ` Lee Jones
2015-05-27 11:13 ` Krzysztof Kozłowski
2015-05-27 12:15 ` Lee Jones
2015-05-27 12:24 ` Lee Jones
2015-05-24 5:43 ` [PATCH v2 3/9] regulator: max77693: Support different register configurations Krzysztof Kozlowski
2015-05-24 5:43 ` [PATCH v2 4/9] extcon/input/mfd/power/regulator: max77693: Move state container to common header Krzysztof Kozlowski
2015-05-26 17:46 ` Dmitry Torokhov
2015-05-27 10:25 ` Lee Jones
2015-05-27 13:55 ` Chanwoo Choi
2015-05-24 5:43 ` [PATCH v2 5/9] extcon/input/mfd/regulator: max77843: Switch to common max77693 state container Krzysztof Kozlowski
2015-05-26 17:46 ` Dmitry Torokhov [this message]
2015-05-27 10:25 ` Lee Jones
2015-05-27 13:54 ` Chanwoo Choi
2015-05-24 5:43 ` [PATCH v2 6/9] mfd/extcon: max77693: Rename defines to allow inclusion with max77843 Krzysztof Kozlowski
2015-05-27 10:26 ` Lee Jones
2015-05-27 13:52 ` Chanwoo Choi
2015-05-24 5:43 ` [PATCH v2 7/9] mfd/extcon: max77843: Rename defines to allow inclusion with max77693 Krzysztof Kozlowski
2015-05-27 13:50 ` Chanwoo Choi
2015-05-27 23:42 ` Krzysztof Kozłowski
2015-05-29 11:06 ` Chanwoo Choi
2015-05-24 5:43 ` [PATCH v2 8/9] regulator: max77693: Add support for MAX77843 device Krzysztof Kozlowski
2015-05-24 5:43 ` [PATCH v2 9/9] regulator: Remove the max77843 driver Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150526174649.GD10571@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=dbaryshkov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=k.kozlowski.k@gmail.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=sameo@linux.intel.com \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).