Re: [PATCH] input: zforce_ts: add DT support for reset GPIO polarity

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

On Mon, Jun 15, 2015 at 07:54:25AM +0200, Dirk Behme wrote:
> From: Knut Wohlrab <Knut.Wohlrab@de.bosch.com>
> 
> According to
> 
> Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
> 
> the RST GPIO is supposed to provide a polarity flag parameter
> 
> gpios = <&GPIO_BANK GPIO_NUMBER GPIO_POLARITY>
> 
> with GPIO_POLARITY
> 
> reset active low  = 1 (GPIO_ACTIVE_LOW)
> reset active high = 0 (GPIO_ACTIVE_HIGH)
> 
> Example for GPIO_ACTIVE_LOW (1) reset GPIO:
> 
> 	zforce_ts@50 { /* Neonode zForce I2C */
> 		compatible = "neonode,zforce-ts";
> 		...
> 		gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>, /* INT */
> 			<&gpio1 29 GPIO_ACTIVE_LOW>; /* RST */
> 		...
> 	};
> 
> Add the missing polarity flag evaluation to the driver.
> 
> Signed-off-by: Knut Wohlrab <Knut.Wohlrab@de.bosch.com>
> Signed-off-by: Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>
> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
> ---
>  drivers/input/touchscreen/zforce_ts.c   | 27 +++++++++++++++++++++++----
>  include/linux/platform_data/zforce_ts.h |  3 +++
>  2 files changed, 26 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
> index 19880c7..125311d 100644
> --- a/drivers/input/touchscreen/zforce_ts.c
> +++ b/drivers/input/touchscreen/zforce_ts.c
> @@ -162,6 +162,20 @@ static int zforce_command(struct zforce_ts *ts, u8 cmd)
>  	return 0;
>  }
>  
> +static void zforce_reset_assert(struct zforce_ts *ts)
> +{
> +	const struct zforce_ts_platdata *pdata = ts->pdata;
> +
> +	gpio_set_value(pdata->gpio_rst, pdata->reset_active_low ? 0 : 1);

Instead of doing this I'd rather we converted the driver to use gpiod
that handles polarity automatically.

Thanks.

-- 
Dmitry