From: Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Dudley Du <dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
Cc: mark.rutland-5wv7dgnIgG8@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
bleung-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
jmmahler-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 2/3] input: cyapa: add of match device support and description document
Date: Thu, 30 Jul 2015 11:33:21 -0700 [thread overview]
Message-ID: <20150730183321.GI13165@dtor-ws> (raw)
In-Reply-To: <1437714359-2484-3-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
On Fri, Jul 24, 2015 at 01:05:58PM +0800, Dudley Du wrote:
> Add of_match_device mechanism support for Cypress trackpad device, and
> add the sample description document on how to adding the trackpad device node
> in the device tree.
>
> Signed-off-by: Dudley Du <dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
Applied, thank you.
> ---
> .../devicetree/bindings/input/cypress,cyapa.txt | 44 ++++++++++++++++++++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> drivers/input/mouse/cyapa.c | 10 +++++
> 3 files changed, 55 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/cypress,cyapa.txt
>
> diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
> new file mode 100644
> index 0000000..9be2b44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
> @@ -0,0 +1,44 @@
> +Cypress I2C Touchpad
> +
> +Required properties:
> +- compatible: must be "cypress,cyapa".
> +- reg: I2C address of the chip.
> +- interrupt-parent: a phandle for the interrupt controller (see interrupt
> + binding[0]).
> +- interrupts: interrupt to which the chip is connected (see interrupt
> + binding[0]).
> +
> +Optional properties:
> +- wakeup-source: touchpad can be used as a wakeup source.
> +- pinctrl-names: should be "default" (see pinctrl binding [1]).
> +- pinctrl-0: a phandle pointing to the pin settings for the device (see
> + pinctrl binding [1]).
> +- vcc-supply: a phandle for the regulator supplying 3.3V power.
> +
> +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> +
> +Example:
> + &i2c0 {
> + /* ... */
> +
> + /* Cypress Gen3 touchpad */
> + touchpad@67 {
> + compatible = "cypress,cyapa";
> + reg = <0x24>;
> + interrupt-parent = <&gpio>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
> + wakeup-source;
> + };
> +
> + /* Cypress Gen5 and later touchpad */
> + touchpad@24 {
> + compatible = "cypress,cyapa";
> + reg = <0x24>;
> + interrupt-parent = <&gpio>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */
> + wakeup-source;
> + };
> +
> + /* ... */
> + };
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index d444757..57c0f5f 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -54,6 +54,7 @@ cortina Cortina Systems, Inc.
> cosmic Cosmic Circuits
> crystalfontz Crystalfontz America, Inc.
> cubietech Cubietech, Ltd.
> +cypress Cypress Semiconductor Corporation
> dallas Maxim Integrated Products (formerly Dallas Semiconductor)
> davicom DAVICOM Semiconductor, Inc.
> delta Delta Electronics, Inc.
> diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
> index 2159c5e..3431510 100644
> --- a/drivers/input/mouse/cyapa.c
> +++ b/drivers/input/mouse/cyapa.c
> @@ -25,6 +25,7 @@
> #include <linux/uaccess.h>
> #include <linux/pm_runtime.h>
> #include <linux/acpi.h>
> +#include <linux/of.h>
> #include "cyapa.h"
>
>
> @@ -1486,11 +1487,20 @@ static const struct acpi_device_id cyapa_acpi_id[] = {
> MODULE_DEVICE_TABLE(acpi, cyapa_acpi_id);
> #endif
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id cyapa_of_match[] = {
> + { .compatible = "cypress,cyapa" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, cyapa_of_match);
> +#endif
> +
> static struct i2c_driver cyapa_driver = {
> .driver = {
> .name = "cyapa",
> .pm = &cyapa_pm_ops,
> .acpi_match_table = ACPI_PTR(cyapa_acpi_id),
> + .of_match_table = of_match_ptr(cyapa_of_match),
> },
>
> .probe = cyapa_probe,
> --
> 1.9.1
>
>
> ---------------------------------------------------------------
> This message and any attachments may contain Cypress (or its
> subsidiaries) confidential information. If it has been received
> in error, please advise the sender and immediately delete this
> message.
> ---------------------------------------------------------------
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-30 18:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-24 5:05 [PATCH 0/3] cyapa patches instruction Dudley Du
2015-07-24 5:05 ` [PATCH 1/3] input: cyapa: add regulator vcc support Dudley Du
2015-07-30 18:33 ` Dmitry Torokhov
2015-07-31 1:45 ` Dudley Du
2015-07-24 5:05 ` [PATCH 2/3] input: cyapa: add of match device support and description document Dudley Du
[not found] ` <1437714359-2484-3-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-07-30 18:33 ` Dmitry Torokhov [this message]
[not found] ` <1437714359-2484-1-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-07-24 5:05 ` [PATCH 3/3] input: cyapa: fix output unwanted warning issue Dudley Du
[not found] ` <1437714359-2484-4-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-07-30 18:33 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150730183321.GI13165@dtor-ws \
--to=dmitry.torokhov-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=bleung-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org \
--cc=jmmahler-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).