[PATCHv8 00/15] HDMI CEC framework

[PATCHv8 00/15] HDMI CEC framework

[Hans Verkuil]

Hi all,

The eighth version of this patchset addresses comments on the mailing list
and many changes due to the work I did on the cec-compliance and cec-ctl
utilities and due to stress-testing that uncovered a serious core design
problem that required a partial rewrite.

As far as I am concerned this version is code complete and the only thing
missing is that the documentation is out-of-sync with the current
implementation.

So there will be a v9 fixing this, but since this may take some time I
decided to post a v8 so people can look at this.

Best regards,

	Hans

Changes since v7
================

- I thought that the core thread could handle out-of-order messages, but that
  turned out to be wrong. After careful analysis I realized that I had to
  rewrite this part in cec.c in order to make it work.
- Added new CEC-specific keys to input.h and use them in the CEC rc keymap.
  Replaced KEY_PLAY/PAUSE/STOP with KEY_PLAYCD/PAUSECD/STOPCD to clarify that
  these are media operations and not the Pause key on the keyboard.
- Added CEC_PHYS_ADDR_INVALID (0xffff)
- Added monitor support to monitor CEC traffic
- Replaced CAP_TRANSMIT and CAP_RECEIVE by a single CAP_IO.
- Replaced CAP_CDC by CAP_CDC_HPD since this only applies to the HPD part of
  the CDC messages.
- Add CAP_IS_SOURCE.
- Add ninputs field to cec_caps to export the number of inputs of the device.
- Drop CEC_LOG_ADDRS_FL_HANDLE_MSGS and the flags field (see next change for
  more info).
- Add CEC_CLAIM and CEC_RELEASE to explicitly start/stop processing CEC messages.
  This also implies ownership of the CEC interface, so other filehandles can
  only receive but not transmit.
- Reworked event handling: report adapter state changes, input changes and
  if the message receive queue is full.
- cec-funcs.h: added CDC HEC support.
- Renamed G/S_ADAP ioctls to ADAP_G/S: this made it clearer which ioctls deal
  with the adapter configuration and which deal with CEC messages/events.
- Clarified which CEC messages are passed on to userspace and which aren't.
  Specifically if CAP_ARC is set, then all ARC messages are handled by the kernel.
  If CAP_CDC_HPD is set, then all CDC hotplug messages are handled by the kernel.
  Otherwise these messages are passed on to userspace.

Changes since v6
================
- added cec-funcs.h to provide wrapper functions that fill in the cec_msg struct.
  This header is needed both by the kernel and by applications.
- fix a missing rc_unregister_device call.
- added CEC support for the adv7842 and cobalt drivers.
- added CEC operand defines. Rename CEC message defines to CEC_MSG_ and operand
  defines now use CEC_OP_.
- the CEC_VERSION defines are dropped since we now have the CEC_OP_VERSION defines.
- ditto: CEC_PRIM_DEVTYPE_ is now CEC_OP_PRIM_DEVTYPE.
- ditto: CEC_FL_ALL_DEVTYPE_ is now CEC_OP_ALL_DEVTYPE.
- cec-ioc-g-adap-log-addrs.xml: document cec_versions field.
- cec-ioc-g-caps.xml: drop vendor_id and version fields.
- add MAINTAINERS entry.
- add CDC support (not yet fully functional).
- add a second debug level for message debugging.
- fix a nasty kernel Oops in cec_transmit_msg while waiting for transmit completion
  (adap->tx_queue[idx].func wasn't set to NULL).
- add support for CEC_MSG_REPORT_FEATURES (CEC 2.0 only).
- correctly abort unsupported messages.
- add support for the device power status feature.
- add support for the audio return channel (preliminary).
- add support for the CDC hotplug message (preliminary).
- added osd_name to struct cec_log_addrs.
- reported physical addresses are stored internally.
- fix enabling/disabling the CEC adapter (internal fields weren't cleared correctly).
- zero reserved fields.
- return an error if you try to receive/transmit and the adapter isn't configured.
- when creating the adapter provide the owner module and the parent device.
- add a CEC_VENDOR_ID_NONE define to signal if no vendor ID was set.
- add new capabilities: RC (remote control), ARC (audio return channel) and CDC
  (Capability Discovery and Control).
- applications that want to handle messages for a logical address need to set the
  CEC_LOG_ADDRS_FL_HANDLE_MSGS flag. Otherwise the CEC core will be the one handling
  all messages.
- Each logical address has its own all_device_types value. So this should be an array,
  not a single value.
- I'm sure I've forgotten some changes...

Changes since v5
================
- drop struct cec_timeval in favour of a __u64 that keeps the timestamp in ns
- remove userspace documentation from Documentation/cec.txt as userspace API
  is described in the DocBook
- add missing documentation for the passthrough mode to the DocBook
- add information about the number of events that can be queued
- fix misspelling of reply
- fix behaviour of posting an event in cec_received_msg, such that the behaviour
  is consistent with the documentation

Changes since v4
================
- add sequence numbering to transmitted messages
- add sequence number handling to event hanlding
- add passthrough mode
- change reserved field sizes
- fixed CEC version defines and addec CEC 2.0 commands
- add DocBook documentation

Changes since v3
================
- remove the promiscuous mode
- rewrite the devicetree patches
- fixes, expansion and partial rewrite of the documentation
- reorder of API structures and addition of reserved fields
- use own struct to report time (32/64 bit safe)
- fix of handling events
- add cec.h to include/uapi/linux/Kbuild
- fixes in the adv76xx driver (add missing methods, change adv7604 to adv76xx)
- cleanup of debug messages in s5p-cec driver
- remove non necessary claiming of a gpio in the s5p-cec driver
- cleanup headers of the s5p-cec driver

Changes since v2
===============-
- added promiscuous mode
- added new key codes to the input framework
- add vendor ID reporting
- add the possibility to clear assigned logical addresses
- cleanup of the rc cec map

Changes since v1
================
- documentation edited and moved to the Documentation folder
- added key up/down message handling
- add missing CEC commands to the cec.h file

Background
==========

The work on a common CEC framework was started over three years ago by Hans
Verkuil. Unfortunately the work has stalled. As I have received the task of
creating a driver for the CEC interface module present on the Exynos range of
SoCs, I got in touch with Hans. He replied that the work stalled due to his
lack of time.

Original RFC by Hans Verkuil/Martin Bugge
=========================================
https://www.mail-archive.com/linux-media@vger.kernel.org/msg28735.html

Hans Verkuil (9):
  input.h: add BUS_CEC type
  cec: add HDMI CEC framework
  cec.txt: add CEC framework documentation
  DocBook/media: add CEC documentation
  v4l2-subdev: add HDMI CEC ops
  cec: adv7604: add cec support.
  cec: adv7842: add cec support
  cec: adv7511: add cec support.
  cobalt: add cec support

Kamil Debski (6):
  dts: exynos4*: add HDMI CEC pin definition to pinctrl
  dts: exynos4: add node for the HDMI CEC device
  dts: exynos4412-odroid*: enable the HDMI CEC device
  HID: add HDMI CEC specific keycodes
  rc: Add HDMI CEC protocol handling
  cec: s5p-cec: Add s5p-cec driver

 Documentation/DocBook/media/Makefile               |    2 +
 Documentation/DocBook/media/v4l/biblio.xml         |   10 +
 Documentation/DocBook/media/v4l/cec-api.xml        |   75 +
 Documentation/DocBook/media/v4l/cec-func-close.xml |   59 +
 Documentation/DocBook/media/v4l/cec-func-ioctl.xml |   73 +
 Documentation/DocBook/media/v4l/cec-func-open.xml  |   94 +
 Documentation/DocBook/media/v4l/cec-func-poll.xml  |   89 +
 .../DocBook/media/v4l/cec-ioc-adap-g-caps.xml      |  138 ++
 .../DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml |  306 ++++
 .../DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml |   78 +
 .../DocBook/media/v4l/cec-ioc-adap-g-state.xml     |   87 +
 .../DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml |   70 +
 .../DocBook/media/v4l/cec-ioc-dqevent.xml          |  125 ++
 .../DocBook/media/v4l/cec-ioc-g-monitor.xml        |   86 +
 .../DocBook/media/v4l/cec-ioc-g-passthrough.xml    |   81 +
 .../DocBook/media/v4l/cec-ioc-receive.xml          |  185 ++
 Documentation/DocBook/media_api.tmpl               |    8 +-
 Documentation/cec.txt                              |  166 ++
 .../devicetree/bindings/media/s5p-cec.txt          |   31 +
 MAINTAINERS                                        |   12 +
 arch/arm/boot/dts/exynos4.dtsi                     |   12 +
 arch/arm/boot/dts/exynos4210-pinctrl.dtsi          |    7 +
 arch/arm/boot/dts/exynos4210-universal_c210.dts    |    4 +
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi          |    7 +
 drivers/media/Kconfig                              |    6 +
 drivers/media/Makefile                             |    2 +
 drivers/media/cec.c                                | 1903 ++++++++++++++++++++
 drivers/media/i2c/adv7511.c                        |  359 +++-
 drivers/media/i2c/adv7604.c                        |  236 ++-
 drivers/media/i2c/adv7842.c                        |  250 ++-
 drivers/media/pci/cobalt/cobalt-driver.c           |   50 +-
 drivers/media/pci/cobalt/cobalt-driver.h           |    2 +
 drivers/media/pci/cobalt/cobalt-irq.c              |    3 +
 drivers/media/pci/cobalt/cobalt-v4l2.c             |  107 +-
 drivers/media/platform/Kconfig                     |   10 +
 drivers/media/platform/Makefile                    |    1 +
 drivers/media/platform/s5p-cec/Makefile            |    2 +
 drivers/media/platform/s5p-cec/exynos_hdmi_cec.h   |   37 +
 .../media/platform/s5p-cec/exynos_hdmi_cecctrl.c   |  208 +++
 drivers/media/platform/s5p-cec/regs-cec.h          |   96 +
 drivers/media/platform/s5p-cec/s5p_cec.c           |  277 +++
 drivers/media/platform/s5p-cec/s5p_cec.h           |   76 +
 drivers/media/rc/keymaps/Makefile                  |    1 +
 drivers/media/rc/keymaps/rc-cec.c                  |  174 ++
 drivers/media/rc/rc-main.c                         |    1 +
 include/media/adv7511.h                            |    6 +-
 include/media/cec.h                                |  178 ++
 include/media/rc-core.h                            |    1 +
 include/media/rc-map.h                             |    5 +-
 include/media/v4l2-subdev.h                        |    9 +
 include/uapi/linux/Kbuild                          |    2 +
 include/uapi/linux/cec-funcs.h                     | 1771 ++++++++++++++++++
 include/uapi/linux/cec.h                           |  781 ++++++++
 include/uapi/linux/input.h                         |   29 +
 54 files changed, 8341 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/DocBook/media/v4l/cec-api.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-func-close.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-func-ioctl.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-func-open.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-func-poll.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-receive.xml
 create mode 100644 Documentation/cec.txt
 create mode 100644 Documentation/devicetree/bindings/media/s5p-cec.txt
 create mode 100644 drivers/media/cec.c
 create mode 100644 drivers/media/platform/s5p-cec/Makefile
 create mode 100644 drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
 create mode 100644 drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
 create mode 100644 drivers/media/platform/s5p-cec/regs-cec.h
 create mode 100644 drivers/media/platform/s5p-cec/s5p_cec.c
 create mode 100644 drivers/media/platform/s5p-cec/s5p_cec.h
 create mode 100644 drivers/media/rc/keymaps/rc-cec.c
 create mode 100644 include/media/cec.h
 create mode 100644 include/uapi/linux/cec-funcs.h
 create mode 100644 include/uapi/linux/cec.h

-- 
2.1.4

[PATCHv8 01/15] dts: exynos4*: add HDMI CEC pin definition to pinctrl

[Hans Verkuil]

From: Kamil Debski <kamil@wypas.org>

Add pinctrl nodes for the HDMI CEC device to the Exynos4210 and
Exynos4x12 SoCs. These are required by the HDMI CEC device.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 7 +++++++
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 7 +++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index a7c2128..9331c62 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -820,6 +820,13 @@
 			samsung,pin-pud = <1>;
 			samsung,pin-drv = <0>;
 		};
+
+		hdmi_cec: hdmi-cec {
+			samsung,pins = "gpx3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index bac25c6..856b292 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -885,6 +885,13 @@
 			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
+
+		hdmi_cec: hdmi-cec {
+			samsung,pins = "gpx3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-- 
2.1.4

[PATCHv8 02/15] dts: exynos4: add node for the HDMI CEC device

[Hans Verkuil]

From: Kamil Debski <kamil@wypas.org>

This patch adds HDMI CEC node specific to the Exynos4210/4x12 SoC series.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b0d52b1..0d5319e 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -719,6 +719,18 @@
 		status = "disabled";
 	};
 
+	hdmicec: cec@100B0000 {
+		compatible = "samsung,s5p-cec";
+		reg = <0x100B0000 0x200>;
+		interrupts = <0 114 0>;
+		clocks = <&clock CLK_HDMI_CEC>;
+		clock-names = "hdmicec";
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_cec>;
+		status = "disabled";
+	};
+
 	mixer: mixer@12C10000 {
 		compatible = "samsung,exynos4210-mixer";
 		interrupts = <0 91 0>;
-- 
2.1.4

[PATCHv8 03/15] dts: exynos4412-odroid*: enable the HDMI CEC device

[Hans Verkuil]

From: Kamil Debski <kamil@wypas.org>

Add a dts node entry and enable the HDMI CEC device present in the Exynos4
family of SoCs.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos4210-universal_c210.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index d4f2b11..06df693 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -515,6 +515,10 @@
 		enable-active-high;
 	};
 
+	cec@100B0000 {
+		status = "okay";
+	};
+
 	hdmi_ddc: i2c-ddc {
 		compatible = "i2c-gpio";
 		gpios = <&gpe4 2 0 &gpe4 3 0>;
-- 
2.1.4

[PATCHv8 04/15] input.h: add BUS_CEC type

[Hans Verkuil]

Inputs can come in over the HDMI CEC bus, so add a new type for this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 include/uapi/linux/input.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index 731417c..a32bff1 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -972,6 +972,7 @@ struct input_keymap_entry {
 #define BUS_GSC			0x1A
 #define BUS_ATARI		0x1B
 #define BUS_SPI			0x1C
+#define BUS_CEC			0x1D
 
 /*
  * MT_TOOL types
-- 
2.1.4

[PATCHv8 05/15] HID: add HDMI CEC specific keycodes

[Hans Verkuil]

From: Kamil Debski <kamil@wypas.org>

Add HDMI CEC specific keycodes to the keycodes definition.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 include/uapi/linux/input.h | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index a32bff1..5e7019a 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -752,6 +752,34 @@ struct input_keymap_entry {
 #define KEY_KBDINPUTASSIST_ACCEPT		0x264
 #define KEY_KBDINPUTASSIST_CANCEL		0x265
 
+#define KEY_RIGHT_UP			0x266
+#define KEY_RIGHT_DOWN			0x267
+#define KEY_LEFT_UP			0x268
+#define KEY_LEFT_DOWN			0x269
+#define KEY_ROOT_MENU			0x26a /* Show Device's Root Menu */
+#define KEY_MEDIA_TOP_MENU		0x26b /* Show Top Menu of the Media (e.g. DVD) */
+#define KEY_NUMERIC_11			0x26c
+#define KEY_NUMERIC_12			0x26d
+/*
+ * Toggle Audio Description: refers to an audio service that helps blind and
+ * visually impaired consumers understand the action in a program. Note: in
+ * some countries this is referred to as "Video Description".
+ */
+#define KEY_AUDIO_DESC			0x26e
+#define KEY_3D_MODE			0x26f
+#define KEY_NEXT_FAVORITE		0x270
+#define KEY_STOP_RECORD			0x271
+#define KEY_PAUSE_RECORD		0x272
+#define KEY_VOD				0x273 /* Video on Demand */
+#define KEY_UNMUTE			0x274
+#define KEY_FASTREVERSE			0x275
+#define KEY_SLOWREVERSE			0x276
+/*
+ * Control a data application associated with the currently viewed channel,
+ * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.)
+ */
+#define KEY_DATA			0x275
+
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0
 #define BTN_TRIGGER_HAPPY2		0x2c1
-- 
2.1.4

[PATCHv8 06/15] rc: Add HDMI CEC protocol handling

[Hans Verkuil]

From: Kamil Debski <kamil@wypas.org>

Add handling of remote control events coming from the HDMI CEC bus.
This patch includes a new keymap that maps values found in the CEC
messages to the keys pressed and released. Also, a new protocol has
been added to the core.

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/rc/keymaps/Makefile |   1 +
 drivers/media/rc/keymaps/rc-cec.c | 174 ++++++++++++++++++++++++++++++++++++++
 drivers/media/rc/rc-main.c        |   1 +
 include/media/rc-core.h           |   1 +
 include/media/rc-map.h            |   5 +-
 5 files changed, 181 insertions(+), 1 deletion(-)
 create mode 100644 drivers/media/rc/keymaps/rc-cec.c

diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index fbbd3bb..9cffcc6 100644
--- a/drivers/media/rc/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-behold.o \
 			rc-behold-columbus.o \
 			rc-budget-ci-old.o \
+			rc-cec.o \
 			rc-cinergy-1400.o \
 			rc-cinergy.o \
 			rc-delock-61959.o \
diff --git a/drivers/media/rc/keymaps/rc-cec.c b/drivers/media/rc/keymaps/rc-cec.c
new file mode 100644
index 0000000..193cdca
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-cec.c
@@ -0,0 +1,174 @@
+/* Keytable for the CEC remote control
+ *
+ * Copyright (c) 2015 by Kamil Debski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+#include <linux/module.h>
+
+/* CEC Spec "High-Definition Multimedia Interface Specification" can be obtained
+ * here: http://xtreamerdev.googlecode.com/files/CEC_Specs.pdf
+ * The list of control codes is listed in Table 27: User Control Codes p. 95 */
+
+static struct rc_map_table cec[] = {
+	{ 0x00, KEY_OK },
+	{ 0x01, KEY_UP },
+	{ 0x02, KEY_DOWN },
+	{ 0x03, KEY_LEFT },
+	{ 0x04, KEY_RIGHT },
+	{ 0x05, KEY_RIGHT_UP },
+	{ 0x06, KEY_RIGHT_DOWN },
+	{ 0x07, KEY_LEFT_UP },
+	{ 0x08, KEY_LEFT_DOWN },
+	{ 0x09, KEY_ROOT_MENU }, /* CEC Spec: Device Root Menu - see Note 2 */
+	/* Note 2: This is the initial display that a device shows. It is
+	 * device-dependent and can be, for example, a contents menu, setup
+	 * menu, favorite menu or other menu. The actual menu displayed
+	 * may also depend on the device's current state. */
+	{ 0x0a, KEY_SETUP },
+	{ 0x0b, KEY_MENU }, /* CEC Spec: Contents Menu */
+	{ 0x0c, KEY_FAVORITES }, /* CEC Spec: Favorite Menu */
+	{ 0x0d, KEY_EXIT },
+	/* 0x0e-0x0f: Reserved */
+	{ 0x10, KEY_MEDIA_TOP_MENU },
+	{ 0x11, KEY_CONTEXT_MENU },
+	/* 0x12-0x1c: Reserved */
+	{ 0x1d, KEY_DIGITS }, /* CEC Spec: select/toggle a Number Entry Mode */
+	{ 0x1e, KEY_NUMERIC_11 },
+	{ 0x1f, KEY_NUMERIC_12 },
+	/* 0x20-0x29: Keys 0 to 9 */
+	{ 0x20, KEY_NUMERIC_0 },
+	{ 0x21, KEY_NUMERIC_1 },
+	{ 0x22, KEY_NUMERIC_2 },
+	{ 0x23, KEY_NUMERIC_3 },
+	{ 0x24, KEY_NUMERIC_4 },
+	{ 0x25, KEY_NUMERIC_5 },
+	{ 0x26, KEY_NUMERIC_6 },
+	{ 0x27, KEY_NUMERIC_7 },
+	{ 0x28, KEY_NUMERIC_8 },
+	{ 0x29, KEY_NUMERIC_9 },
+	{ 0x2a, KEY_DOT },
+	{ 0x2b, KEY_ENTER },
+	{ 0x2c, KEY_CLEAR },
+	/* 0x2d-0x2e: Reserved */
+	{ 0x2f, KEY_NEXT_FAVORITE }, /* CEC Spec: Next Favorite */
+	{ 0x30, KEY_CHANNELUP },
+	{ 0x31, KEY_CHANNELDOWN },
+	{ 0x32, KEY_PREVIOUS }, /* CEC Spec: Previous Channel */
+	{ 0x33, KEY_SOUND }, /* CEC Spec: Sound Select */
+	{ 0x34, KEY_VIDEO }, /* 0x34: CEC Spec: Input Select */
+	{ 0x35, KEY_INFO }, /* CEC Spec: Display Information */
+	{ 0x36, KEY_HELP },
+	{ 0x37, KEY_PAGEUP },
+	{ 0x38, KEY_PAGEDOWN },
+	/* 0x39-0x3f: Reserved */
+	{ 0x40, KEY_POWER },
+	{ 0x41, KEY_VOLUMEUP },
+	{ 0x42, KEY_VOLUMEDOWN },
+	{ 0x43, KEY_MUTE },
+	{ 0x44, KEY_PLAYCD },
+	{ 0x45, KEY_STOPCD },
+	{ 0x46, KEY_PAUSECD },
+	{ 0x47, KEY_RECORD },
+	{ 0x48, KEY_REWIND },
+	{ 0x49, KEY_FASTFORWARD },
+	{ 0x4a, KEY_EJECTCD }, /* CEC Spec: Eject */
+	{ 0x4b, KEY_FORWARD },
+	{ 0x4c, KEY_BACK },
+	{ 0x4d, KEY_STOP_RECORD }, /* CEC Spec: Stop-Record */
+	{ 0x4e, KEY_PAUSE_RECORD }, /* CEC Spec: Pause-Record */
+	/* 0x4f: Reserved */
+	{ 0x50, KEY_ANGLE },
+	{ 0x51, KEY_TV2 },
+	{ 0x52, KEY_VOD }, /* CEC Spec: Video on Demand */
+	{ 0x53, KEY_EPG },
+	{ 0x54, KEY_TIME }, /* CEC Spec: Timer */
+	{ 0x55, KEY_CONFIG },
+	/* The following codes are hard to implement at this moment, as they
+	 * carry an additional additional argument. Most likely changes to RC
+	 * framework are necessary.
+	 * For now they are interpreted by the CEC framework as non keycodes
+	 * and are passed as messages enabling user application to parse them.
+	 * */
+	/* 0x56: CEC Spec: Select Broadcast Type */
+	/* 0x57: CEC Spec: Select Sound presentation */
+	{ 0x58, KEY_AUDIO_DESC }, /* CEC 2.0 and up */
+	{ 0x59, KEY_WWW }, /* CEC 2.0 and up */
+	{ 0x5a, KEY_3D_MODE }, /* CEC 2.0 and up */
+	/* 0x5b-0x5f: Reserved */
+	{ 0x60, KEY_PLAYCD }, /* CEC Spec: Play Function */
+	{ 0x6005, KEY_FASTFORWARD },
+	{ 0x6006, KEY_FASTFORWARD },
+	{ 0x6007, KEY_FASTFORWARD },
+	{ 0x6015, KEY_SLOW },
+	{ 0x6016, KEY_SLOW },
+	{ 0x6017, KEY_SLOW },
+	{ 0x6009, KEY_FASTREVERSE },
+	{ 0x600a, KEY_FASTREVERSE },
+	{ 0x600b, KEY_FASTREVERSE },
+	{ 0x6019, KEY_SLOWREVERSE },
+	{ 0x601a, KEY_SLOWREVERSE },
+	{ 0x601b, KEY_SLOWREVERSE },
+	{ 0x6020, KEY_REWIND },
+	{ 0x6024, KEY_PLAYCD },
+	{ 0x6025, KEY_PAUSECD },
+	{ 0x61, KEY_PLAYPAUSE }, /* CEC Spec: Pause-Play Function */
+	{ 0x62, KEY_RECORD }, /* Spec: Record Function */
+	{ 0x63, KEY_PAUSE_RECORD }, /* CEC Spec: Pause-Record Function */
+	{ 0x64, KEY_STOPCD }, /* CEC Spec: Stop Function */
+	{ 0x65, KEY_MUTE }, /* CEC Spec: Mute Function */
+	{ 0x66, KEY_UNMUTE }, /* CEC Spec: Restore the volume */
+	/* The following codes are hard to implement at this moment, as they
+	 * carry an additional additional argument. Most likely changes to RC
+	 * framework are necessary.
+	 * For now they are interpreted by the CEC framework as non keycodes
+	 * and are passed as messages enabling user application to parse them.
+	 * */
+	/* 0x67: CEC Spec: Tune Function */
+	/* 0x68: CEC Spec: Seleect Media Function */
+	/* 0x69: CEC Spec: Select A/V Input Function */
+	/* 0x6a: CEC Spec: Select Audio Input Function */
+	{ 0x6b, KEY_POWER }, /* CEC Spec: Power Toggle Function */
+	{ 0x6c, KEY_SLEEP }, /* CEC Spec: Power Off Function */
+	{ 0x6d, KEY_WAKEUP }, /* CEC Spec: Power On Function */
+	/* 0x6e-0x70: Reserved */
+	{ 0x71, KEY_BLUE }, /* CEC Spec: F1 (Blue) */
+	{ 0x72, KEY_RED }, /* CEC Spec: F2 (Red) */
+	{ 0x73, KEY_GREEN }, /* CEC Spec: F3 (Green) */
+	{ 0x74, KEY_YELLOW }, /* CEC Spec: F4 (Yellow) */
+	{ 0x75, KEY_F5 },
+	{ 0x76, KEY_DATA }, /* CEC Spec: Data - see Note 3 */
+	/* Note 3: This is used, for example, to enter or leave a digital TV
+	 * data broadcast application. */
+	/* 0x77-0xff: Reserved */
+};
+
+static struct rc_map_list cec_map = {
+	.map = {
+		.scan		= cec,
+		.size		= ARRAY_SIZE(cec),
+		.rc_type	= RC_TYPE_CEC,
+		.name		= RC_MAP_CEC,
+	}
+};
+
+static int __init init_rc_map_cec(void)
+{
+	return rc_map_register(&cec_map);
+}
+
+static void __exit exit_rc_map_cec(void)
+{
+	rc_map_unregister(&cec_map);
+}
+
+module_init(init_rc_map_cec);
+module_exit(exit_rc_map_cec);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kamil Debski");
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index d08cedb..b5949bc 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -801,6 +801,7 @@ static struct {
 	{ RC_BIT_SHARP,		"sharp"		},
 	{ RC_BIT_MCE_KBD,	"mce_kbd"	},
 	{ RC_BIT_XMP,		"xmp"		},
+	{ RC_BIT_CEC,		"cec"		},
 };
 
 /**
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index 5642fbe..e2ba912 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -32,6 +32,7 @@ do {								\
 enum rc_driver_type {
 	RC_DRIVER_SCANCODE = 0,	/* Driver or hardware generates a scancode */
 	RC_DRIVER_IR_RAW,	/* Needs a Infra-Red pulse/space decoder */
+	RC_DRIVER_CEC,
 };
 
 /**
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index 7c4bbc4..d9f87d5 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -31,6 +31,7 @@ enum rc_type {
 	RC_TYPE_RC6_MCE		= 16,	/* MCE (Philips RC6-6A-32 subtype) protocol */
 	RC_TYPE_SHARP		= 17,	/* Sharp protocol */
 	RC_TYPE_XMP		= 18,	/* XMP protocol */
+	RC_TYPE_CEC		= 19,	/* CEC protocol */
 };
 
 #define RC_BIT_NONE		0
@@ -53,6 +54,7 @@ enum rc_type {
 #define RC_BIT_RC6_MCE		(1 << RC_TYPE_RC6_MCE)
 #define RC_BIT_SHARP		(1 << RC_TYPE_SHARP)
 #define RC_BIT_XMP		(1 << RC_TYPE_XMP)
+#define RC_BIT_CEC		(1 << RC_TYPE_CEC)
 
 #define RC_BIT_ALL	(RC_BIT_UNKNOWN | RC_BIT_OTHER | \
 			 RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ | \
@@ -61,7 +63,7 @@ enum rc_type {
 			 RC_BIT_NEC | RC_BIT_SANYO | RC_BIT_MCE_KBD | \
 			 RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | \
 			 RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE | RC_BIT_SHARP | \
-			 RC_BIT_XMP)
+			 RC_BIT_XMP | RC_BIT_CEC)
 
 
 #define RC_SCANCODE_UNKNOWN(x)			(x)
@@ -123,6 +125,7 @@ void rc_map_init(void);
 #define RC_MAP_BEHOLD_COLUMBUS           "rc-behold-columbus"
 #define RC_MAP_BEHOLD                    "rc-behold"
 #define RC_MAP_BUDGET_CI_OLD             "rc-budget-ci-old"
+#define RC_MAP_CEC                       "rc-cec"
 #define RC_MAP_CINERGY_1400              "rc-cinergy-1400"
 #define RC_MAP_CINERGY                   "rc-cinergy"
 #define RC_MAP_DELOCK_61959              "rc-delock-61959"
-- 
2.1.4

[PATCHv8 07/15] cec: add HDMI CEC framework

[Hans Verkuil]

The added HDMI CEC framework provides a generic kernel interface for
HDMI CEC devices.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: Merged CEC Updates commit by Hans Verkuil]
[k.debski@samsung.com: Merged Update author commit by Hans Verkuil]
[k.debski@samsung.com: change kthread handling when setting logical
address]
[k.debski@samsung.com: code cleanup and fixes]
[k.debski@samsung.com: add missing CEC commands to match spec]
[k.debski@samsung.com: add RC framework support]
[k.debski@samsung.com: move and edit documentation]
[k.debski@samsung.com: add vendor id reporting]
[k.debski@samsung.com: add possibility to clear assigned logical
addresses]
[k.debski@samsung.com: documentation fixes, clenaup and expansion]
[k.debski@samsung.com: reorder of API structs and add reserved fields]
[k.debski@samsung.com: fix handling of events and fix 32/64bit timespec
problem]
[k.debski@samsung.com: add cec.h to include/uapi/linux/Kbuild]
[k.debski@samsung.com: add sequence number handling]
[k.debski@samsung.com: add passthrough mode]
[k.debski@samsung.com: fix CEC defines, add missing CEC 2.0 commands]
minor additions]
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 MAINTAINERS                    |   12 +
 drivers/media/Kconfig          |    6 +
 drivers/media/Makefile         |    2 +
 drivers/media/cec.c            | 1903 ++++++++++++++++++++++++++++++++++++++++
 include/media/cec.h            |  178 ++++
 include/uapi/linux/Kbuild      |    2 +
 include/uapi/linux/cec-funcs.h | 1771 +++++++++++++++++++++++++++++++++++++
 include/uapi/linux/cec.h       |  781 +++++++++++++++++
 8 files changed, 4655 insertions(+)
 create mode 100644 drivers/media/cec.c
 create mode 100644 include/media/cec.h
 create mode 100644 include/uapi/linux/cec-funcs.h
 create mode 100644 include/uapi/linux/cec.h

diff --git a/MAINTAINERS b/MAINTAINERS
index e0946a0..2904a66 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2553,6 +2553,18 @@ F:	drivers/net/ieee802154/cc2520.c
 F:	include/linux/spi/cc2520.h
 F:	Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
 
+CEC DRIVER
+M:	Hans Verkuil <hans.verkuil@cisco.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+W:	http://linuxtv.org
+S:	Supported
+F:	drivers/media/cec.c
+F:	drivers/media/rc/keymaps/rc-cec.c
+F:	include/media/cec.h
+F:	include/uapi/linux/cec.h
+F:	include/uapi/linux/cec-funcs.h
+
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
 L:	linuxppc-dev@lists.ozlabs.org
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index 3ef3d6c..48e44f5 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -15,6 +15,12 @@ if MEDIA_SUPPORT
 
 comment "Multimedia core support"
 
+config CEC
+	tristate "CEC API (EXPERIMENTAL)"
+	select RC_CORE
+	---help---
+	  Enable the CEC API.
+
 #
 # Multimedia support - automatically enable V4L2 and DVB core
 #
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index e608bbc..db66014 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
+obj-$(CONFIG_CEC) += cec.o
+
 media-objs	:= media-device.o media-devnode.o media-entity.o
 
 #
diff --git a/drivers/media/cec.c b/drivers/media/cec.c
new file mode 100644
index 0000000..6c485d3
--- /dev/null
+++ b/drivers/media/cec.c
@@ -0,0 +1,1903 @@
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <media/cec.h>
+
+#define CEC_NUM_DEVICES	256
+#define CEC_NAME	"cec"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+#define dprintk(lvl, fmt, arg...)					\
+	do {								\
+		if (lvl <= debug)					\
+			pr_info("cec-%s: " fmt, adap->name, ## arg);	\
+	} while (0)
+
+static dev_t cec_dev_t;
+
+/* Active devices */
+static DEFINE_MUTEX(cec_devnode_lock);
+static DECLARE_BITMAP(cec_devnode_nums, CEC_NUM_DEVICES);
+
+/* dev to cec_devnode */
+#define to_cec_devnode(cd) container_of(cd, struct cec_devnode, dev)
+
+static inline struct cec_devnode *cec_devnode_data(struct file *filp)
+{
+	struct cec_fh *fh = filp->private_data;
+
+	return &fh->adap->devnode;
+}
+
+static bool cec_pa_are_adjacent(const struct cec_adapter *adap, u16 pa1, u16 pa2)
+{
+	u16 mask = 0xf000;
+	int i;
+
+	if (pa1 == CEC_PHYS_ADDR_INVALID || pa2 == CEC_PHYS_ADDR_INVALID)
+		return false;
+	for (i = 0; i < 3; i++) {
+		if ((pa1 & mask) != (pa2 & mask))
+			break;
+		mask = (mask >> 4) | 0xf000;
+	}
+	if ((pa1 & ~mask) || (pa2 & ~mask))
+		return false;
+	if (!(pa1 & mask) ^ !(pa2 & mask))
+		return true;
+	return false;
+}
+
+static bool cec_la_are_adjacent(const struct cec_adapter *adap, u8 la1, u8 la2)
+{
+	u16 pa1 = adap->phys_addrs[la1];
+	u16 pa2 = adap->phys_addrs[la2];
+
+	return cec_pa_are_adjacent(adap, pa1, pa2);
+}
+
+static int cec_log_addr2idx(const struct cec_adapter *adap, u8 log_addr)
+{
+	int i;
+
+	for (i = 0; i < adap->num_log_addrs; i++)
+		if (adap->log_addr[i] == log_addr)
+			return i;
+	return -1;
+}
+
+static unsigned cec_log_addr2dev(const struct cec_adapter *adap, u8 log_addr)
+{
+	int i = cec_log_addr2idx(adap, log_addr);
+
+	return adap->prim_device[i < 0 ? 0 : i];
+}
+
+/* Called when the last user of the cec device exits. */
+static void cec_devnode_release(struct device *cd)
+{
+	struct cec_devnode *cecdev = to_cec_devnode(cd);
+
+	mutex_lock(&cec_devnode_lock);
+
+	/* Delete the cdev on this minor as well */
+	cdev_del(&cecdev->cdev);
+
+	/* Mark device node number as free */
+	clear_bit(cecdev->minor, cec_devnode_nums);
+
+	mutex_unlock(&cec_devnode_lock);
+
+	/* Release cec_devnode and perform other cleanups as needed. */
+	if (cecdev->release)
+		cecdev->release(cecdev);
+}
+
+static struct bus_type cec_bus_type = {
+	.name = CEC_NAME,
+};
+
+static void cec_queue_msg_fh(struct cec_fh *fh, const struct cec_msg *msg)
+{
+	struct cec_msg_entry *entry;
+	struct cec_event *ev = &fh->events[CEC_EVENT_LOST_MSGS - 1];
+
+	mutex_lock(&fh->lock);
+	if (fh->queued_msgs == CEC_MAX_MSG_QUEUE_SZ)
+		goto lost_msgs;
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (entry == NULL)
+		goto lost_msgs;
+
+	entry->msg = *msg;
+	list_add(&entry->list, &fh->msgs);
+	fh->queued_msgs++;
+	mutex_unlock(&fh->lock);
+	wake_up_interruptible(&fh->wait);
+	return;
+
+lost_msgs:
+	if (ev->event == 0) {
+		ev->ts = ktime_get_ns();
+		ev->event = CEC_EVENT_LOST_MSGS;
+	}
+	mutex_unlock(&fh->lock);
+	wake_up_interruptible(&fh->wait);
+}
+
+static void cec_queue_msg_monitor(struct cec_adapter *adap,
+				  const struct cec_msg *msg)
+{
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.fhs_lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list) {
+		if (fh->monitor)
+			cec_queue_msg_fh(fh, msg);
+	}
+	mutex_unlock(&adap->devnode.fhs_lock);
+}
+
+static void cec_post_state_event_fh(struct cec_adapter *adap,
+				    struct cec_fh *fh, u64 ts)
+{
+	struct cec_event *ev = &fh->events[CEC_EVENT_STATE_CHANGE - 1];
+	struct cec_event_state_change *ch = &ev->state_change;
+
+	mutex_lock(&fh->lock);
+	ev->ts = ts;
+	ev->event = CEC_EVENT_STATE_CHANGE;
+	if (!adap->is_enabled)
+		ch->state = CEC_EVENT_STATE_DISABLED;
+	else if (adap->is_configuring)
+		ch->state = CEC_EVENT_STATE_CONFIGURING;
+	else if (adap->is_configured)
+		ch->state = CEC_EVENT_STATE_CONFIGURED;
+	else
+		ch->state = CEC_EVENT_STATE_UNCONFIGURED;
+	mutex_unlock(&fh->lock);
+	wake_up_interruptible(&fh->wait);
+}
+
+static void cec_post_state_event(struct cec_adapter *adap)
+{
+	u64 ts = ktime_get_ns();
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.fhs_lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		cec_post_state_event_fh(adap, fh, ts);
+	mutex_unlock(&adap->devnode.fhs_lock);
+}
+
+static void cec_data_completed(struct cec_data *data)
+{
+	if (data->blocking) {
+		/*
+		 * Someone is blocking so mark the message as completed
+		 * and call complete.
+		 */
+		data->completed = true;
+		complete(&data->c);
+	} else {
+		/*
+		 * No blocking, so just queue the message if needed and
+		 * free the memory.
+		 */
+		if (data->fh)
+			cec_queue_msg_fh(data->fh, &data->msg);
+		kfree(data);
+	}
+}
+
+/*
+ * Main CEC state machine
+ *
+ * Wait until the thread should be stopped, or we're not transmitting and
+ * a new transmit message is queued up, in which case we start transmitting
+ * that message. When the adapter finished transmitting the message it will
+ * call cec_transmit_done().
+ *
+ * If the adapter is disabled, then remove all queued messages instead.
+ */
+static int cec_thread_func(void *_adap)
+{
+	struct cec_adapter *adap = _adap;
+
+	for (;;) {
+		struct cec_data *data;
+		u32 timeout;
+
+		wait_event_interruptible(adap->kthread_waitq,
+			kthread_should_stop() ||
+			(!adap->transmitting &&
+			 !list_empty(&adap->transmit_queue)));
+
+		if (kthread_should_stop())
+			break;
+		mutex_lock(&adap->lock);
+
+		if (!adap->is_enabled) {
+			while (!list_empty(&adap->transmit_queue)) {
+				data = list_first_entry(&adap->transmit_queue,
+							struct cec_data, list);
+				list_del(&data->list);
+				data->msg.ts = ktime_get_ns();
+				data->msg.status = CEC_TX_STATUS_RETRY_TIMEOUT;
+				data->msg.reply = 0;
+				cec_data_completed(data);
+			}
+			goto unlock;
+		}
+
+		if (list_empty(&adap->transmit_queue))
+			goto unlock;
+
+		data = list_first_entry(&adap->transmit_queue,
+					struct cec_data, list);
+		list_del(&data->list);
+		adap->transmitting = data;
+		timeout = data->msg.len == 1 ? 200 : 1000;
+		adap->adap_transmit(adap, timeout, &data->msg);
+unlock:
+		mutex_unlock(&adap->lock);
+	}
+	return 0;
+}
+
+void cec_transmit_done(struct cec_adapter *adap, u32 status)
+{
+	dprintk(2, "cec_transmit_done\n");
+	mutex_lock(&adap->lock);
+	if (WARN_ON(adap->transmitting == NULL)) {
+		dprintk(0, "cec_transmit_done without an ongoing transmit!\n");
+	} else {
+		struct cec_data *data = adap->transmitting;
+		struct cec_msg *msg = &data->msg;
+
+		msg->ts = ktime_get_ns();
+		msg->status = status;
+		if (status || !adap->is_configured)
+			msg->reply = 0;
+		/* Queue transmitted message for monitoring purposes */
+		cec_queue_msg_monitor(adap, msg);
+		adap->transmitting = NULL;
+		if (msg->reply) {
+			/*
+			 * We want to wait for a reply, so queue the message to
+			 * the wait_queue and schedule a timeout task.
+			 */
+			if (msg->timeout == 0)
+				msg->timeout = 1000;
+			list_add_tail(&data->list, &adap->wait_queue);
+			schedule_delayed_work(&data->work,
+					      msecs_to_jiffies(msg->timeout));
+		} else {
+			cec_data_completed(data);
+		}
+		/*
+		 * Wake up the main thread to see if another message is ready
+		 * for transmitting.
+		 */
+		wake_up_interruptible(&adap->kthread_waitq);
+	}
+	mutex_unlock(&adap->lock);
+}
+EXPORT_SYMBOL_GPL(cec_transmit_done);
+
+/*
+ * Called when waiting for a reply times out.
+ */
+static void cec_wait_timeout(struct work_struct *work)
+{
+	struct cec_data *data = container_of(work, struct cec_data, work.work);
+	struct cec_adapter *adap = data->adap;
+
+	mutex_lock(&adap->lock);
+	if (list_empty(&data->list))
+		goto unlock;
+
+	list_del_init(&data->list);
+	data->msg.ts = ktime_get_ns();
+	data->msg.status = CEC_TX_STATUS_REPLY_TIMEOUT;
+	cec_data_completed(data);
+unlock:
+	mutex_unlock(&adap->lock);
+}
+
+static int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg,
+			       struct cec_fh *fh, bool block)
+{
+	struct cec_data *data;
+	int res = 0;
+
+	if (msg->len == 0 || msg->len > 16) {
+		dprintk(1, "cec_transmit_msg: invalid length %d\n", msg->len);
+		return -EINVAL;
+	}
+	if (msg->reply && (msg->len == 1 || (cec_msg_is_broadcast(msg)))) {
+		dprintk(1, "cec_transmit_msg: can't reply for poll or broadcast msg\n");
+		return -EINVAL;
+	}
+	if (msg->len > 1 && !cec_msg_is_broadcast(msg) &&
+	    cec_msg_initiator(msg) == cec_msg_destination(msg)) {
+		dprintk(1, "cec_transmit_msg: initiator == destination\n");
+		return -EINVAL;
+	}
+	if (cec_msg_initiator(msg) != 0xf &&
+	    cec_log_addr2idx(adap, cec_msg_initiator(msg)) < 0) {
+		dprintk(1, "cec_transmit_msg: initiator has unknown logical address\n");
+		return -EINVAL;
+	}
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	if (msg->len == 1)
+		dprintk(2, "cec_transmit_msg: 0x%02x%s\n",
+				msg->msg[0], !block ? " nb" : "");
+	else if (msg->reply)
+		dprintk(2, "cec_transmit_msg: 0x%02x 0x%02x (wait for 0x%02x)%s\n",
+				msg->msg[0], msg->msg[1],
+				msg->reply, !block ? " nb" : "");
+	else
+		dprintk(2, "cec_transmit_msg: 0x%02x 0x%02x%s\n",
+				msg->msg[0], msg->msg[1],
+				!block ? " nb" : "");
+
+	if (msg->len > 1 && msg->msg[1] == CEC_MSG_CDC_MESSAGE) {
+		msg->msg[2] = adap->phys_addr >> 8;
+		msg->msg[3] = adap->phys_addr & 0xff;
+	}
+	data->msg = *msg;
+	data->fh = fh;
+	data->adap = adap;
+	data->blocking = block;
+	init_completion(&data->c);
+	INIT_DELAYED_WORK(&data->work, cec_wait_timeout);
+
+	mutex_lock(&adap->lock);
+	if (adap->is_configured || adap->is_configuring) {
+		data->msg.sequence = adap->sequence++;
+		list_add_tail(&data->list, &adap->transmit_queue);
+		if (adap->transmitting == NULL)
+			wake_up_interruptible(&adap->kthread_waitq);
+	} else {
+		res = -ENONET;
+		kfree(data);
+	}
+	mutex_unlock(&adap->lock);
+	if (res || !block)
+		return res;
+	res = wait_for_completion_interruptible(&data->c);
+	mutex_lock(&adap->lock);
+	if (data->completed) {
+		*msg = data->msg;
+		kfree(data);
+		res = 0;
+	} else {
+		data->blocking = false;
+		data->fh = NULL;
+	}
+	mutex_unlock(&adap->lock);
+	return res;
+}
+
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
+		     bool block)
+{
+	return cec_transmit_msg_fh(adap, msg, NULL, block);
+}
+EXPORT_SYMBOL_GPL(cec_transmit_msg);
+
+static int cec_report_features(struct cec_adapter *adap, unsigned la_idx)
+{
+	struct cec_msg msg = { };
+	u8 *features = adap->features[la_idx];
+	bool op_is_dev_features = false;
+	unsigned idx;
+
+	if (adap->cec_version < CEC_OP_CEC_VERSION_2_0)
+		return 0;
+
+	/* Report Features */
+	msg.msg[0] = (adap->log_addr[la_idx] << 4) | 0x0f;
+	msg.len = 4;
+	msg.msg[1] = CEC_MSG_REPORT_FEATURES;
+	msg.msg[2] = adap->cec_version;
+	msg.msg[3] = adap->all_device_types[la_idx];
+
+	/* Write RC Profiles first, then Device Features */
+	for (idx = 0; idx < sizeof(adap->features[0]); idx++) {
+		msg.msg[msg.len++] = features[idx];
+		if ((features[idx] & CEC_OP_FEAT_EXT) == 0) {
+			if (op_is_dev_features)
+				break;
+			op_is_dev_features = true;
+		}
+	}
+	return cec_transmit_msg(adap, &msg, false);
+}
+
+static int cec_report_phys_addr(struct cec_adapter *adap, unsigned la_idx)
+{
+	struct cec_msg msg = { };
+
+	/* Report Physical Address */
+	msg.msg[0] = (adap->log_addr[la_idx] << 4) | 0x0f;
+	cec_msg_report_physical_addr(&msg, adap->phys_addr,
+				     adap->prim_device[la_idx]);
+	dprintk(2, "config: la %d pa %x.%x.%x.%x\n",
+			adap->log_addr[la_idx],
+			cec_phys_addr_exp(adap->phys_addr));
+	return cec_transmit_msg(adap, &msg, false);
+}
+
+static int cec_feature_abort_reason(struct cec_adapter *adap,
+				    struct cec_msg *msg, u8 reason)
+{
+	struct cec_msg tx_msg = { };
+
+	/*
+	 * Don't reply with CEC_MSG_FEATURE_ABORT to a CEC_MSG_FEATURE_ABORT
+	 * message!
+	 */
+	if (msg->msg[1] == CEC_MSG_FEATURE_ABORT)
+		return 0;
+	cec_msg_set_reply_to(&tx_msg, msg);
+	cec_msg_feature_abort(&tx_msg, msg->msg[1], reason);
+	return cec_transmit_msg(adap, &tx_msg, false);
+}
+
+static int cec_feature_abort(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	return cec_feature_abort_reason(adap, msg,
+					CEC_OP_ABORT_UNRECOGNIZED_OP);
+}
+
+static int cec_feature_refused(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	return cec_feature_abort_reason(adap, msg,
+					CEC_OP_ABORT_REFUSED);
+}
+
+/*
+ * Called when a CEC message is received. This function will do any
+ * necessary core processing. The is_reply bool is true if this message
+ * is a reply to an earlier transmit.
+ */
+static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg,
+			      bool is_reply)
+{
+	bool is_broadcast = cec_msg_is_broadcast(msg);
+	u8 dest_laddr = cec_msg_destination(msg);
+	u8 init_laddr = cec_msg_initiator(msg);
+	u8 devtype = cec_log_addr2dev(adap, dest_laddr);
+	int la_idx = cec_log_addr2idx(adap, dest_laddr);
+	bool is_directed = la_idx >= 0;
+	bool from_unregistered = init_laddr == 0xf;
+	u16 cdc_phys_addr;
+	struct cec_msg tx_cec_msg = { };
+	u8 *tx_msg = tx_cec_msg.msg;
+
+	dprintk(1, "cec_receive_notify: %02x %02x\n", msg->msg[0], msg->msg[1]);
+
+	if (!is_directed && !is_broadcast) {
+		if (adap->passthrough)
+			goto skip_processing;
+		return 0;
+	}
+
+	if (adap->received) {
+		/* Allow drivers to process the message first */
+		if (adap->received(adap, msg) != -ENOMSG)
+			return 0;
+	}
+
+	/*
+	 * ARC, CDC and REPORT_PHYSICAL_ADDR, CEC_MSG_USER_CONTROL_PRESSED and
+	 * CEC_MSG_USER_CONTROL_RELEASED messages always have to be
+	 * handled by the CEC core, even if the passthrough mode is on.
+	 * ARC and CDC messages will never be seen even if passthrough is
+	 * on, but the others are just passed on normally.
+	 */
+	switch (msg->msg[1]) {
+	case CEC_MSG_INITIATE_ARC:
+	case CEC_MSG_TERMINATE_ARC:
+	case CEC_MSG_REQUEST_ARC_INITIATION:
+	case CEC_MSG_REQUEST_ARC_TERMINATION:
+	case CEC_MSG_REPORT_ARC_INITIATED:
+	case CEC_MSG_REPORT_ARC_TERMINATED:
+		/* ARC messages are never passed through if CAP_ARC is set */
+
+		/* Abort/ignore if ARC is not supported */
+		if (!(adap->capabilities & CEC_CAP_ARC)) {
+			/* Just abort if nobody is listening */
+			if (is_directed && !is_reply && !adap->cec_owner)
+				return cec_feature_abort(adap, msg);
+			goto skip_processing;
+		}
+		/* Ignore if addressing is wrong */
+		if (is_broadcast || from_unregistered)
+			return 0;
+		break;
+
+	case CEC_MSG_CDC_MESSAGE:
+		switch (msg->msg[4]) {
+		case CEC_MSG_CDC_HPD_REPORT_STATE:
+		case CEC_MSG_CDC_HPD_SET_STATE:
+			/*
+			 * CDC_HPD messages are never passed through if
+			 * CAP_CDC_HPD is set
+			 */
+
+			/* Ignore if CDC_HPD is not supported */
+			if (!(adap->capabilities & CEC_CAP_CDC_HPD))
+				goto skip_processing;
+			/* or the addressing is wrong */
+			if (!is_broadcast)
+				return 0;
+			break;
+		default:
+			/* Other CDC messages are ignored */
+			goto skip_processing;
+		}
+		break;
+
+	case CEC_MSG_GET_CEC_VERSION:
+	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
+	case CEC_MSG_ABORT:
+	case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
+	case CEC_MSG_GIVE_PHYSICAL_ADDR:
+	case CEC_MSG_GIVE_OSD_NAME:
+	case CEC_MSG_GIVE_FEATURES:
+		/*
+		 * Skip processing these messages if the passthrough mode
+		 * is on.
+		 */
+		if (adap->passthrough)
+			goto skip_processing;
+		/* Ignore if addressing is wrong */
+		if (is_broadcast || from_unregistered)
+			return 0;
+		break;
+
+	case CEC_MSG_USER_CONTROL_PRESSED:
+	case CEC_MSG_USER_CONTROL_RELEASED:
+		/* Wrong addressing mode: don't process */
+		if (is_broadcast || from_unregistered)
+			goto skip_processing;
+		break;
+
+	case CEC_MSG_REPORT_PHYSICAL_ADDR:
+		/*
+		 * This message is always processed, regardless of the
+		 * passthrough setting.
+		 *
+		 * Exception: don't process if wrong addressing mode.
+		 */
+		if (!is_broadcast)
+			goto skip_processing;
+		break;
+
+	default:
+		break;
+	}
+
+	cec_msg_set_reply_to(&tx_cec_msg, msg);
+
+	switch (msg->msg[1]) {
+	/* The following messages are processed but still passed through */
+	case CEC_MSG_REPORT_PHYSICAL_ADDR:
+		adap->phys_addrs[init_laddr] =
+			(msg->msg[2] << 8) | msg->msg[3];
+		dprintk(1, "Reported physical address %04x for logical address %d\n",
+			adap->phys_addrs[init_laddr], init_laddr);
+		break;
+
+	case CEC_MSG_USER_CONTROL_PRESSED:
+		if (!(adap->capabilities & CEC_CAP_RC))
+			break;
+
+		switch (msg->msg[2]) {
+		/* Play function, this message can have variable length
+		 * depending on the specific play function that is used.
+		 */
+		case 0x60:
+			if (msg->len == 2)
+				rc_keydown(adap->rc, RC_TYPE_CEC,
+					   msg->msg[2], 0);
+			else
+				rc_keydown(adap->rc, RC_TYPE_CEC,
+					   msg->msg[2] << 8 | msg->msg[3], 0);
+			break;
+		/* Other function messages that are not handled.
+		 * Currently the RC framework does not allow to supply an
+		 * additional parameter to a keypress. These "keys" contain
+		 * other information such as channel number, an input number
+		 * etc.
+		 * For the time being these messages are not processed by the
+		 * framework and are simply forwarded to the user space.
+		 */
+		case 0x56: case 0x57:
+		case 0x67: case 0x68: case 0x69: case 0x6a:
+			break;
+		default:
+			rc_keydown(adap->rc, RC_TYPE_CEC, msg->msg[2], 0);
+			break;
+		}
+		break;
+
+	case CEC_MSG_USER_CONTROL_RELEASED:
+		if (!(adap->capabilities & CEC_CAP_RC))
+			break;
+		rc_keyup(adap->rc);
+		break;
+
+	/*
+	 * The remaining messages are only processed if the passthrough mode
+	 * is off.
+	 */
+	case CEC_MSG_GET_CEC_VERSION:
+		cec_msg_cec_version(&tx_cec_msg, adap->cec_version);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_GIVE_PHYSICAL_ADDR:
+		/* Do nothing for CEC switches using addr 15 */
+		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH && dest_laddr == 15)
+			return 0;
+		cec_msg_report_physical_addr(&tx_cec_msg, adap->phys_addr, devtype);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_GIVE_DEVICE_VENDOR_ID:
+		if (!(adap->capabilities & CEC_CAP_VENDOR_ID) ||
+		    adap->vendor_id == CEC_VENDOR_ID_NONE)
+			return cec_feature_abort(adap, msg);
+		cec_msg_device_vendor_id(&tx_cec_msg, adap->vendor_id);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_ABORT:
+		/* Do nothing for CEC switches */
+		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH)
+			return 0;
+		return cec_feature_refused(adap, msg);
+
+	case CEC_MSG_GIVE_DEVICE_POWER_STATUS:
+		/* Do nothing for CEC switches */
+		if (devtype == CEC_OP_PRIM_DEVTYPE_SWITCH)
+			return 0;
+		cec_msg_report_power_status(&tx_cec_msg, adap->pwr_state);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_GIVE_OSD_NAME: {
+		if (adap->osd_name[0] == 0)
+			return cec_feature_abort(adap, msg);
+		cec_msg_set_osd_name(&tx_cec_msg, adap->osd_name);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+	}
+
+	case CEC_MSG_GIVE_FEATURES:
+		if (adap->cec_version >= CEC_OP_CEC_VERSION_2_0)
+			return cec_report_features(adap, la_idx);
+		return 0;
+
+	case CEC_MSG_REQUEST_ARC_INITIATION:
+		if (!adap->is_source ||
+		    !cec_la_are_adjacent(adap, dest_laddr, init_laddr))
+			return cec_feature_refused(adap, msg);
+		cec_msg_initiate_arc(&tx_cec_msg, false);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_REQUEST_ARC_TERMINATION:
+		if (!adap->is_source ||
+		    !cec_la_are_adjacent(adap, dest_laddr, init_laddr))
+			return cec_feature_refused(adap, msg);
+		cec_msg_terminate_arc(&tx_cec_msg, false);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_INITIATE_ARC:
+		if (!adap->ninputs ||
+		    !cec_la_are_adjacent(adap, dest_laddr, init_laddr))
+			return cec_feature_refused(adap, msg);
+		if (adap->sink_initiate_arc && adap->sink_initiate_arc(adap))
+			return 0;
+		cec_msg_report_arc_initiated(&tx_cec_msg);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_TERMINATE_ARC:
+		if (!adap->ninputs ||
+		    !cec_la_are_adjacent(adap, dest_laddr, init_laddr))
+			return cec_feature_refused(adap, msg);
+		if (adap->sink_terminate_arc && adap->sink_terminate_arc(adap))
+			return 0;
+		cec_msg_report_arc_terminated(&tx_cec_msg);
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+
+	case CEC_MSG_REPORT_ARC_INITIATED:
+		if (!adap->is_source ||
+		    !cec_la_are_adjacent(adap, dest_laddr, init_laddr))
+			return cec_feature_refused(adap, msg);
+		if (adap->source_arc_initiated)
+			adap->source_arc_initiated(adap);
+		return 0;
+
+	case CEC_MSG_REPORT_ARC_TERMINATED:
+		if (!adap->is_source ||
+		    !cec_la_are_adjacent(adap, dest_laddr, init_laddr))
+			return cec_feature_refused(adap, msg);
+		if (adap->source_arc_terminated)
+			adap->source_arc_terminated(adap);
+		return 0;
+
+	case CEC_MSG_CDC_MESSAGE: {
+		unsigned shift;
+		unsigned input_port;
+
+		cdc_phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+		if (!cec_pa_are_adjacent(adap, cdc_phys_addr, adap->phys_addr))
+			return 0;
+
+		switch (msg->msg[4]) {
+		case CEC_MSG_CDC_HPD_REPORT_STATE:
+			/*
+			 * Ignore if we're not a sink or the message comes from
+			 * an upstream device.
+			 */
+			if (!adap->ninputs || cdc_phys_addr <= adap->phys_addr)
+				return 0;
+			adap->sink_cdc_hpd(adap, msg->msg[5] >> 4, msg->msg[5] & 0xf);
+			return 0;
+		case CEC_MSG_CDC_HPD_SET_STATE:
+			/* Ignore if we're not a source */
+			if (!adap->is_source)
+				return 0;
+			break;
+		default:
+			return 0;
+		}
+
+		input_port = msg->msg[5] >> 4;
+		for (shift = 0; shift < 16; shift += 4) {
+			if (cdc_phys_addr & (0xf000 >> shift))
+				continue;
+			cdc_phys_addr |= input_port << (12 - shift);
+			break;
+		}
+		if (cdc_phys_addr != adap->phys_addr)
+			return 0;
+
+		tx_cec_msg.len = 6;
+		/* broadcast reply */
+		tx_msg[0] = (adap->log_addr[0] << 4) | 0xf;
+		cec_msg_cdc_hpd_report_state(&tx_cec_msg,
+			     msg->msg[5] & 0xf,
+			     adap->source_cdc_hpd(adap, msg->msg[5] & 0xf));
+		return cec_transmit_msg(adap, &tx_cec_msg, false);
+	}
+
+	default:
+		/*
+		 * Unprocessed messages are aborted if userspace isn't doing
+		 * any processing either.
+		 */
+		if (is_directed && !is_reply && !adap->cec_owner)
+			return cec_feature_abort(adap, msg);
+		break;
+	}
+
+skip_processing:
+	if (!is_reply && adap->cec_owner)
+		cec_queue_msg_fh(adap->cec_owner, msg);
+	return 0;
+}
+
+void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg)
+{
+	struct cec_data *data;
+	bool is_reply = false;
+
+	mutex_lock(&adap->lock);
+	msg->ts = ktime_get_ns();
+	msg->status = CEC_RX_STATUS_READY;
+	msg->sequence = msg->reply = msg->timeout = 0;
+	memset(msg->reserved, 0, sizeof(msg->reserved));
+	dprintk(2, "cec_received_msg: %02x %02x\n", msg->msg[0], msg->msg[1]);
+	if (msg->len > 1 && msg->msg[1] != CEC_MSG_CDC_MESSAGE) {
+		u8 cmd = msg->msg[1];
+
+		if (cmd == CEC_MSG_FEATURE_ABORT)
+			cmd = msg->msg[2];
+		list_for_each_entry(data, &adap->wait_queue, list) {
+			struct cec_msg *dst = &data->msg;
+
+			if (cec_msg_initiator(msg) != cec_msg_destination(dst) ||
+			    cmd != dst->reply)
+				continue;
+			msg->sequence = dst->sequence;
+			*dst = *msg;
+			if (msg->msg[1] == CEC_MSG_FEATURE_ABORT) {
+				dst->reply = 0;
+				dst->status = CEC_TX_STATUS_FEATURE_ABORT;
+			}
+			list_del_init(&data->list);
+			if (!cancel_delayed_work(&data->work)) {
+				mutex_unlock(&adap->lock);
+				flush_scheduled_work();
+				mutex_lock(&adap->lock);
+			}
+			if (data->blocking || data->fh)
+				is_reply = true;
+			cec_data_completed(data);
+			break;
+		}
+	}
+	mutex_unlock(&adap->lock);
+	cec_queue_msg_monitor(adap, msg);
+
+	if (msg->len <= 1)
+		return;
+
+	cec_receive_notify(adap, msg, is_reply);
+}
+EXPORT_SYMBOL_GPL(cec_received_msg);
+
+static int cec_receive_msg(struct cec_fh *fh, struct cec_msg *msg, bool block)
+{
+	int res;
+
+	do {
+		mutex_lock(&fh->lock);
+		if (fh->queued_msgs) {
+			struct cec_msg_entry *entry =
+				list_first_entry(&fh->msgs,
+						 struct cec_msg_entry, list);
+
+			list_del(&entry->list);
+			*msg = entry->msg;
+			kfree(entry);
+			fh->queued_msgs--;
+			res = 0;
+		} else {
+			res = -EAGAIN;
+		}
+		mutex_unlock(&fh->lock);
+		if (!block || !res)
+			break;
+		if (msg->timeout) {
+			res = wait_event_interruptible_timeout(fh->wait,
+				fh->queued_msgs,
+				msecs_to_jiffies(msg->timeout));
+			if (res == 0)
+				res = -ETIMEDOUT;
+			else if (res > 0)
+				res = 0;
+		} else {
+			res = wait_event_interruptible(fh->wait,
+				fh->queued_msgs);
+		}
+	} while (!res);
+	return res;
+}
+
+static void cec_post_inputs_event_fh(struct cec_adapter *adap,
+				     struct cec_fh *fh, u64 ts)
+{
+	struct cec_event *ev = &fh->events[CEC_EVENT_INPUTS_CHANGE - 1];
+	struct cec_event_inputs_change *ch = &ev->inputs_change;
+
+	mutex_lock(&fh->lock);
+	if (ev->event == 0) {
+		ev->ts = ts;
+		ev->event = CEC_EVENT_INPUTS_CHANGE;
+	}
+	ch->changed_inputs |=
+		adap->connected_inputs ^ ch->connected_inputs;
+	ch->connected_inputs = adap->connected_inputs;
+	mutex_unlock(&fh->lock);
+	wake_up_interruptible(&fh->wait);
+}
+
+static void cec_post_inputs_event(struct cec_adapter *adap)
+{
+	u64 ts = ktime_get_ns();
+	struct cec_fh *fh;
+
+	mutex_lock(&adap->devnode.fhs_lock);
+	list_for_each_entry(fh, &adap->devnode.fhs, list)
+		cec_post_inputs_event_fh(adap, fh, ts);
+	mutex_unlock(&adap->devnode.fhs_lock);
+}
+
+int cec_enable(struct cec_adapter *adap, bool enable)
+{
+	int ret = 0;
+
+	mutex_lock(&adap->lock);
+	if (enable == adap->is_enabled)
+		goto unlock;
+	ret = adap->adap_enable(adap, enable);
+	if (ret)
+		goto unlock;
+	adap->is_configured = false;
+	adap->is_enabled = enable;
+	if (!enable) {
+		adap->num_log_addrs = 0;
+		memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs));
+		wake_up_interruptible(&adap->kthread_waitq);
+	}
+	cec_post_state_event(adap);
+unlock:
+	mutex_unlock(&adap->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cec_enable);
+
+struct cec_log_addrs_int {
+	struct cec_adapter *adap;
+	struct cec_log_addrs log_addrs;
+	struct completion c;
+	bool free_on_exit;
+	int err;
+};
+
+static int cec_config_log_addrs(struct cec_adapter *adap,
+				struct cec_log_addrs *log_addrs)
+{
+	static const u8 tv_log_addrs[] = {
+		0, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 record_log_addrs[] = {
+		1, 2, 9, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 tuner_log_addrs[] = {
+		3, 6, 7, 10, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 playback_log_addrs[] = {
+		4, 8, 11, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 audiosystem_log_addrs[] = {
+		5, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 specific_use_log_addrs[] = {
+		14, 12, 13, CEC_LOG_ADDR_INVALID
+	};
+	static const u8 unregistered_log_addrs[] = {
+		CEC_LOG_ADDR_INVALID
+	};
+	static const u8 *type2addrs[7] = {
+		[CEC_LOG_ADDR_TYPE_TV] = tv_log_addrs,
+		[CEC_LOG_ADDR_TYPE_RECORD] = record_log_addrs,
+		[CEC_LOG_ADDR_TYPE_TUNER] = tuner_log_addrs,
+		[CEC_LOG_ADDR_TYPE_PLAYBACK] = playback_log_addrs,
+		[CEC_LOG_ADDR_TYPE_AUDIOSYSTEM] = audiosystem_log_addrs,
+		[CEC_LOG_ADDR_TYPE_SPECIFIC] = specific_use_log_addrs,
+		[CEC_LOG_ADDR_TYPE_UNREGISTERED] = unregistered_log_addrs,
+	};
+	struct cec_msg msg = { };
+	u32 claimed_addrs = 0;
+	int i, j;
+	int err;
+
+	if (adap->phys_addr) {
+		/* The TV functionality can only map to physical address 0.
+		   For any other address, try the Specific functionality
+		   instead as per the spec. */
+		for (i = 0; i < log_addrs->num_log_addrs; i++)
+			if (log_addrs->log_addr_type[i] == CEC_LOG_ADDR_TYPE_TV)
+				log_addrs->log_addr_type[i] =
+						CEC_LOG_ADDR_TYPE_SPECIFIC;
+	}
+
+	dprintk(2, "physical address: %x.%x.%x.%x, claim %d logical addresses\n",
+			cec_phys_addr_exp(adap->phys_addr),
+			log_addrs->num_log_addrs);
+	strlcpy(adap->osd_name, log_addrs->osd_name, sizeof(adap->osd_name));
+	adap->num_log_addrs = 0;
+	cec_post_state_event(adap);
+
+	/* TODO: remember last used logical addr type to achieve
+	   faster logical address polling by trying that one first.
+	 */
+	for (i = 0; i < log_addrs->num_log_addrs; i++) {
+		const u8 *la_list = type2addrs[log_addrs->log_addr_type[i]];
+
+		if (kthread_should_stop()) {
+			err = -EINTR;
+			goto unconfigure;
+		}
+
+		for (j = 0; la_list[j] != CEC_LOG_ADDR_INVALID; j++) {
+			u8 log_addr = la_list[j];
+
+			if (claimed_addrs & (1 << log_addr))
+				continue;
+
+			/* Send polling message */
+			msg.len = 1;
+			msg.msg[0] = 0xf0 | log_addr;
+			msg.reply = 0;
+			err = cec_transmit_msg(adap, &msg, true);
+			if (err)
+				goto unconfigure;
+
+			if (msg.status == CEC_TX_STATUS_RETRY_TIMEOUT) {
+				unsigned idx = adap->num_log_addrs++;
+
+				/* Message not acknowledged, so this logical
+				   address is free to use. */
+				claimed_addrs |= 1 << log_addr;
+				adap->log_addr[idx] = log_addr;
+				log_addrs->log_addr[i] = log_addr;
+				adap->log_addr_type[idx] =
+					log_addrs->log_addr_type[i];
+				adap->prim_device[idx] =
+					log_addrs->primary_device_type[i];
+				adap->all_device_types[idx] =
+					log_addrs->all_device_types[i];
+				adap->phys_addrs[log_addr] = adap->phys_addr;
+				memcpy(adap->features[idx], log_addrs->features[i],
+				       sizeof(adap->features[idx]));
+				err = adap->adap_log_addr(adap, log_addr);
+				dprintk(2, "claim addr %d (%d)\n", log_addr,
+							adap->prim_device[idx]);
+				if (err)
+					goto unconfigure;
+
+				/*
+				 * Report Features must come first according
+				 * to CEC 2.0
+				 */
+				cec_report_features(adap, idx);
+				cec_report_phys_addr(adap, idx);
+				break;
+			}
+		}
+	}
+	if (adap->num_log_addrs == 0) {
+		if (log_addrs->num_log_addrs > 1)
+			dprintk(2, "could not claim last %d addresses\n",
+				log_addrs->num_log_addrs - 1);
+		adap->log_addr[0] = 15;
+		adap->log_addr_type[0] = CEC_LOG_ADDR_TYPE_UNREGISTERED;
+		adap->prim_device[0] = CEC_OP_PRIM_DEVTYPE_SWITCH;
+		adap->all_device_types[0] = CEC_OP_ALL_DEVTYPE_SWITCH;
+		err = adap->adap_log_addr(adap, 15);
+		dprintk(2, "claim addr %d (%d)\n", 15, adap->prim_device[0]);
+		if (err)
+			goto unconfigure;
+
+		adap->num_log_addrs = 1;
+		/* TODO: do we need to do this for an unregistered device? */
+		cec_report_phys_addr(adap, 0);
+	}
+	mutex_lock(&adap->lock);
+	adap->is_configured = true;
+	adap->is_configuring = false;
+	cec_post_state_event(adap);
+	mutex_unlock(&adap->lock);
+	return 0;
+
+unconfigure:
+	mutex_lock(&adap->lock);
+	adap->num_log_addrs = 0;
+	adap->is_configuring = false;
+	cec_post_state_event(adap);
+	mutex_unlock(&adap->lock);
+	return err;
+}
+
+static int cec_config_thread_func(void *arg)
+{
+	struct cec_log_addrs_int *cla_int = arg;
+	int err;
+
+	cla_int->err = err = cec_config_log_addrs(cla_int->adap,
+						  &cla_int->log_addrs);
+	cla_int->adap->kthread_config = NULL;
+	if (cla_int->free_on_exit)
+		kfree(cla_int);
+	else
+		complete(&cla_int->c);
+
+	return err;
+}
+
+int cec_claim_log_addrs(struct cec_adapter *adap,
+			struct cec_log_addrs *log_addrs, bool block)
+{
+	struct cec_log_addrs_int *cla_int;
+	int i;
+
+	if (!adap->is_enabled)
+		return -ENONET;
+
+	if (log_addrs->num_log_addrs > CEC_MAX_LOG_ADDRS) {
+		dprintk(1, "num_log_addrs > %d\n", CEC_MAX_LOG_ADDRS);
+		return -EINVAL;
+	}
+	if (log_addrs->num_log_addrs == 0) {
+		int err = adap->adap_log_addr(adap, CEC_LOG_ADDR_INVALID);
+
+		if (err)
+			return err;
+		mutex_lock(&adap->lock);
+		adap->is_configured = false;
+		adap->num_log_addrs = 0;
+		wake_up_interruptible(&adap->kthread_waitq);
+		cec_post_state_event(adap);
+		mutex_unlock(&adap->lock);
+		return 0;
+	}
+	if (log_addrs->cec_version != CEC_OP_CEC_VERSION_1_4 &&
+	    log_addrs->cec_version != CEC_OP_CEC_VERSION_2_0) {
+		dprintk(1, "unsupported CEC version\n");
+		return -EINVAL;
+	}
+	if (log_addrs->num_log_addrs > 1)
+		for (i = 0; i < log_addrs->num_log_addrs; i++)
+			if (log_addrs->log_addr_type[i] ==
+					CEC_LOG_ADDR_TYPE_UNREGISTERED) {
+				dprintk(1, "can't claim unregistered logical address\n");
+				return -EINVAL;
+			}
+	for (i = 0; i < log_addrs->num_log_addrs; i++) {
+		u8 *features = log_addrs->features[i];
+		bool op_is_dev_features = false;
+
+		if (log_addrs->primary_device_type[i] >
+					CEC_OP_PRIM_DEVTYPE_PROCESSOR) {
+			dprintk(1, "unknown primary device type\n");
+			return -EINVAL;
+		}
+		if (log_addrs->primary_device_type[i] == 2) {
+			dprintk(1, "invalid primary device type\n");
+			return -EINVAL;
+		}
+		if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
+			dprintk(1, "unknown logical address type\n");
+			return -EINVAL;
+		}
+		if (log_addrs->cec_version < CEC_OP_CEC_VERSION_2_0)
+			continue;
+
+		for (i = 0; i < sizeof(adap->features[0]); i++) {
+			if ((features[i] & 0x80) == 0) {
+				if (op_is_dev_features)
+					break;
+				op_is_dev_features = true;
+			}
+		}
+		if (!op_is_dev_features || i == sizeof(adap->features[0])) {
+			dprintk(1, "malformed features\n");
+			return -EINVAL;
+		}
+	}
+
+	/* For phys addr 0xffff only the Unregistered functionality is
+	   allowed. */
+	if (adap->phys_addr == CEC_PHYS_ADDR_INVALID &&
+	    (log_addrs->num_log_addrs > 1 ||
+	     log_addrs->log_addr_type[0] != CEC_LOG_ADDR_TYPE_UNREGISTERED)) {
+		dprintk(1, "physical addr 0xffff only allows unregistered logical address\n");
+		return -EINVAL;
+	}
+
+	cla_int = kzalloc(sizeof(*cla_int), GFP_KERNEL);
+	if (cla_int == NULL)
+		return -ENOMEM;
+	mutex_lock(&adap->lock);
+	if (adap->is_configuring || adap->is_configured) {
+		mutex_unlock(&adap->lock);
+		kfree(cla_int);
+		return -EBUSY;
+	}
+	adap->is_configuring = true;
+	mutex_unlock(&adap->lock);
+	init_completion(&cla_int->c);
+	cla_int->free_on_exit = !block;
+	cla_int->adap = adap;
+	cla_int->log_addrs = *log_addrs;
+	adap->kthread_config = kthread_run(cec_config_thread_func, cla_int,
+					   "ceccfg-%s", adap->name);
+	if (block) {
+		wait_for_completion(&cla_int->c);
+		*log_addrs = cla_int->log_addrs;
+		kfree(cla_int);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cec_claim_log_addrs);
+
+void cec_log_status(struct cec_adapter *adap)
+{
+	dprintk(0, "enabled: %d\n", adap->is_enabled);
+	dprintk(0, "configured: %d\n", adap->is_configured);
+	dprintk(0, "configuring: %d\n", adap->is_configuring);
+	dprintk(0, "phys_addr: %04x\n", adap->phys_addr);
+	dprintk(0, "number of LAs: %d\n", adap->num_log_addrs);
+	if (adap->cec_owner)
+		dprintk(0, "has owner\n");
+	if (adap->passthrough)
+		dprintk(0, "has passthrough\n");
+	if (mutex_is_locked(&adap->lock))
+		dprintk(0, "is locked\n");
+}
+EXPORT_SYMBOL_GPL(cec_log_status);
+
+void cec_connected_inputs(struct cec_adapter *adap, u16 connected_inputs)
+{
+	if (adap->connected_inputs != connected_inputs) {
+		adap->connected_inputs = connected_inputs;
+		if (cec_devnode_is_registered(&adap->devnode))
+			cec_post_inputs_event(adap);
+	}
+}
+EXPORT_SYMBOL_GPL(cec_connected_inputs);
+
+u8 cec_sink_cdc_hpd(struct cec_adapter *adap, u8 input_port, u8 cdc_hpd_state)
+{
+	struct cec_msg msg = { };
+	int err;
+
+	if (!adap->is_configured)
+		return CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE;
+
+	msg.msg[0] = (adap->log_addr[0] << 4) | 0xf;
+	cec_msg_cdc_hpd_set_state(&msg, input_port, cdc_hpd_state);
+	err = cec_transmit_msg(adap, &msg, false);
+	if (err)
+		return CEC_OP_HPD_ERROR_OTHER;
+	return CEC_OP_HPD_ERROR_NONE;
+}
+EXPORT_SYMBOL_GPL(cec_sink_cdc_hpd);
+
+static unsigned int cec_poll(struct file *filp,
+			       struct poll_table_struct *poll)
+{
+	struct cec_fh *fh = filp->private_data;
+	struct cec_adapter *adap = fh->adap;
+	unsigned res = 0;
+
+	if (!cec_devnode_is_registered(&adap->devnode))
+		return POLLERR | POLLHUP;
+	mutex_lock(&adap->lock);
+	if (adap->is_configured)
+		res |= POLLOUT | POLLWRNORM;
+	if (fh->queued_msgs)
+		res |= POLLIN | POLLRDNORM;
+	if (fh->events)
+		res |= POLLPRI;
+	poll_wait(filp, &fh->wait, poll);
+	mutex_unlock(&adap->lock);
+	return res;
+}
+
+static long cec_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	struct cec_fh *fh = filp->private_data;
+	struct cec_adapter *adap = fh->adap;
+	bool block = !(filp->f_flags & O_NONBLOCK);
+	void __user *parg = (void __user *)arg;
+	int err;
+
+	if (!cec_devnode_is_registered(&adap->devnode))
+		return -EIO;
+
+	switch (cmd) {
+	case CEC_ADAP_G_CAPS: {
+		struct cec_caps caps;
+
+		caps.available_log_addrs = adap->available_log_addrs;
+		caps.capabilities = adap->capabilities;
+		caps.ninputs = adap->ninputs;
+		memset(caps.reserved, 0, sizeof(caps.reserved));
+		if (copy_to_user(parg, &caps, sizeof(caps)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_TRANSMIT: {
+		struct cec_msg msg;
+
+		if (!(adap->capabilities & CEC_CAP_IO))
+			return -ENOTTY;
+		if (copy_from_user(&msg, parg, sizeof(msg)))
+			return -EFAULT;
+		memset(msg.reserved, 0, sizeof(msg.reserved));
+		if (!adap->is_configured)
+			return -ENONET;
+		if (fh->monitor)
+			return -EPERM;
+		if (adap->cec_owner && adap->cec_owner != fh)
+			return -EBUSY;
+		if (block || !msg.reply)
+			fh = NULL;
+
+		err = cec_transmit_msg_fh(adap, &msg, fh, block);
+		if (err)
+			return err;
+		if (copy_to_user(parg, &msg, sizeof(msg)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_RECEIVE: {
+		struct cec_msg msg;
+
+		if (!(adap->capabilities & CEC_CAP_IO))
+			return -ENOTTY;
+		if (copy_from_user(&msg, parg, sizeof(msg)))
+			return -EFAULT;
+		memset(msg.reserved, 0, sizeof(msg.reserved));
+		if (!adap->is_configured)
+			return -ENONET;
+		if (!fh->monitor && adap->cec_owner != fh)
+			return -EPERM;
+
+		err = cec_receive_msg(fh, &msg, block);
+		if (err)
+			return err;
+		if (copy_to_user(parg, &msg, sizeof(msg)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_DQEVENT: {
+		struct cec_event *ev = NULL;
+		u64 ts = ~0ULL;
+		unsigned i;
+
+		mutex_lock(&fh->lock);
+		for (i = 0; i < CEC_NUM_EVENTS; i++) {
+			if (fh->events[i].event &&
+			    fh->events[i].ts <= ts) {
+				ev = &fh->events[i];
+				ts = ev->ts;
+			}
+		}
+		err = -EAGAIN;
+		if (ev) {
+			if (copy_to_user((void __user *)arg, ev, sizeof(*ev))) {
+				err = -EFAULT;
+			} else {
+				if (ev->event == CEC_EVENT_INPUTS_CHANGE)
+					ev->inputs_change.changed_inputs = 0;
+				ev->event = 0;
+				err = 0;
+			}
+		}
+		mutex_unlock(&fh->lock);
+		return err;
+	}
+
+	case CEC_ADAP_G_STATE: {
+		u32 state = adap->is_enabled;
+
+		if (copy_to_user(parg, &state, sizeof(state)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_ADAP_S_STATE: {
+		u32 state;
+
+		if (!(adap->capabilities & CEC_CAP_STATE))
+			return -ENOTTY;
+		if (copy_from_user(&state, parg, sizeof(state)))
+			return -EFAULT;
+		if (state > CEC_ADAP_ENABLED)
+			return -EINVAL;
+		if (adap->is_configuring)
+			return -EBUSY;
+		if (state == adap->is_enabled)
+			return 0;
+		if (adap->cec_owner && adap->cec_owner != fh)
+			return -EBUSY;
+		cec_enable(adap, state);
+		break;
+	}
+
+	case CEC_ADAP_G_PHYS_ADDR: {
+		u16 phys_addr = adap->is_enabled ? adap->phys_addr :
+			CEC_PHYS_ADDR_INVALID;
+
+		if (copy_to_user(parg, &phys_addr, sizeof(adap->phys_addr)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_ADAP_S_PHYS_ADDR: {
+		u16 phys_addr;
+
+		if (!(adap->capabilities & CEC_CAP_PHYS_ADDR))
+			return -ENOTTY;
+		if (copy_from_user(&phys_addr, parg, sizeof(phys_addr)))
+			return -EFAULT;
+		if (adap->phys_addr == phys_addr)
+			return 0;
+		if (!adap->is_enabled)
+			return -ENONET;
+		if (adap->is_configuring || adap->is_configured)
+			return -EBUSY;
+		if (adap->cec_owner && adap->cec_owner != fh)
+			return -EBUSY;
+		adap->phys_addr = phys_addr;
+		break;
+	}
+
+	case CEC_ADAP_S_LOG_ADDRS: {
+		struct cec_log_addrs log_addrs;
+
+		if (!(adap->capabilities & CEC_CAP_LOG_ADDRS))
+			return -ENOTTY;
+		if (copy_from_user(&log_addrs, parg, sizeof(log_addrs)))
+			return -EFAULT;
+		if (adap->is_configuring)
+			return -EBUSY;
+		if (log_addrs.num_log_addrs && adap->is_configured)
+			return -EBUSY;
+		if (adap->cec_owner && adap->cec_owner != fh)
+			return -EBUSY;
+
+		memset(log_addrs.reserved, 0, sizeof(log_addrs.reserved));
+		err = cec_claim_log_addrs(adap, &log_addrs, block);
+		if (err)
+			return err;
+
+		if (filp->f_flags & O_NONBLOCK) {
+			if (copy_to_user(parg, &log_addrs, sizeof(log_addrs)))
+				return -EFAULT;
+			break;
+		}
+
+		/* fall through */
+	}
+
+	case CEC_ADAP_G_LOG_ADDRS: {
+		struct cec_log_addrs log_addrs = { adap->cec_version };
+		unsigned i;
+
+		mutex_lock(&adap->lock);
+		log_addrs.num_log_addrs = adap->num_log_addrs;
+		strlcpy(log_addrs.osd_name, adap->osd_name,
+			sizeof(log_addrs.osd_name));
+		for (i = 0; i < adap->num_log_addrs; i++) {
+			log_addrs.primary_device_type[i] = adap->prim_device[i];
+			log_addrs.log_addr_type[i] = adap->log_addr_type[i];
+			log_addrs.log_addr[i] = adap->log_addr[i];
+			log_addrs.all_device_types[i] = adap->all_device_types[i];
+			memcpy(log_addrs.features[i], adap->features[i],
+			       sizeof(log_addrs.features[i]));
+		}
+		mutex_unlock(&adap->lock);
+
+		if (copy_to_user(parg, &log_addrs, sizeof(log_addrs)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_ADAP_G_VENDOR_ID:
+		if (copy_to_user(parg, &adap->vendor_id,
+						sizeof(adap->vendor_id)))
+			return -EFAULT;
+		break;
+
+	case CEC_ADAP_S_VENDOR_ID: {
+		u32 vendor_id;
+
+		if (!(adap->capabilities & CEC_CAP_VENDOR_ID))
+			return -ENOTTY;
+		if (copy_from_user(&vendor_id, parg, sizeof(vendor_id)))
+			return -EFAULT;
+		/* Vendor ID is a 24 bit number, so check if the value is
+		 * within the correct range. */
+		if (vendor_id != CEC_VENDOR_ID_NONE &&
+		    (vendor_id & 0xff000000) != 0)
+			return -EINVAL;
+		if (adap->vendor_id == vendor_id)
+			return 0;
+		if (adap->is_configuring || adap->is_configured)
+			return -EBUSY;
+		if (adap->cec_owner && adap->cec_owner != fh)
+			return -EBUSY;
+		adap->vendor_id = vendor_id;
+		break;
+	}
+
+	case CEC_G_PASSTHROUGH: {
+		u32 passthrough = CEC_PASSTHROUGH_DISABLED;
+
+		if (!(adap->capabilities & CEC_CAP_PASSTHROUGH))
+			return -ENOTTY;
+		if (adap->cec_owner == fh)
+			passthrough = adap->passthrough;
+		if (copy_to_user(parg, &passthrough, sizeof(passthrough)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_G_MONITOR: {
+		u32 monitor = fh->monitor;
+
+		if (copy_to_user(parg, &monitor, sizeof(monitor)))
+			return -EFAULT;
+		break;
+	}
+
+	case CEC_S_MONITOR: {
+		u32 monitor;
+
+		if (copy_from_user(&monitor, parg, sizeof(monitor)))
+			return -EFAULT;
+		if (monitor > CEC_MONITOR_ENABLED)
+			return -EINVAL;
+		if (fh->monitor == monitor)
+			break;
+		if (adap->cec_owner == fh)
+			return -EBUSY;
+		fh->monitor = monitor;
+		break;
+	}
+
+	case CEC_CLAIM: {
+		u32 passthrough;
+
+		if (copy_from_user(&passthrough, parg, sizeof(passthrough)))
+			return -EFAULT;
+		if (passthrough > CEC_PASSTHROUGH_ENABLED)
+			return -EINVAL;
+		if (passthrough &&
+		    !(adap->capabilities & CEC_CAP_PASSTHROUGH))
+			return -EPERM;
+		if (adap->cec_owner && adap->cec_owner != fh)
+			return -EBUSY;
+		if (fh->monitor)
+			return -EBUSY;
+		mutex_lock(&adap->lock);
+		adap->passthrough = passthrough;
+		adap->cec_owner = fh;
+		mutex_unlock(&adap->lock);
+		break;
+	}
+
+	case CEC_RELEASE: {
+		if (adap->cec_owner && adap->cec_owner != fh)
+			return -EBUSY;
+		mutex_lock(&adap->lock);
+		adap->cec_owner = NULL;
+		adap->passthrough = 0;
+		mutex_unlock(&adap->lock);
+		break;
+	}
+
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+/* Override for the open function */
+static int cec_open(struct inode *inode, struct file *filp)
+{
+	struct cec_devnode *cecdev;
+	struct cec_fh *fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+
+	if (fh == NULL)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&fh->msgs);
+	mutex_init(&fh->lock);
+	init_waitqueue_head(&fh->wait);
+
+	/* Check if the cec device is available. This needs to be done with
+	 * the cec_devnode_lock held to prevent an open/unregister race:
+	 * without the lock, the device could be unregistered and freed between
+	 * the cec_devnode_is_registered() and get_device() calls, leading to
+	 * a crash.
+	 */
+	mutex_lock(&cec_devnode_lock);
+	cecdev = container_of(inode->i_cdev, struct cec_devnode, cdev);
+	/* return ENXIO if the cec device has been removed
+	   already or if it is not registered anymore. */
+	if (!cec_devnode_is_registered(cecdev)) {
+		mutex_unlock(&cec_devnode_lock);
+		kfree(fh);
+		return -ENXIO;
+	}
+	/* and increase the device refcount */
+	get_device(&cecdev->dev);
+	mutex_unlock(&cec_devnode_lock);
+
+	fh->adap = to_cec_adapter(cecdev);
+	filp->private_data = fh;
+	mutex_lock(&cecdev->fhs_lock);
+	list_add(&fh->list, &cecdev->fhs);
+	mutex_unlock(&cecdev->fhs_lock);
+	if (fh->adap->ninputs)
+		cec_post_inputs_event_fh(fh->adap, fh, ktime_get_ns());
+	cec_post_state_event_fh(fh->adap, fh, ktime_get_ns());
+
+	return 0;
+}
+
+/* Override for the release function */
+static int cec_release(struct inode *inode, struct file *filp)
+{
+	struct cec_devnode *cecdev = cec_devnode_data(filp);
+	struct cec_adapter *adap = to_cec_adapter(cecdev);
+	struct cec_fh *fh = filp->private_data;
+	int ret = 0;
+
+	if (adap->cec_owner == fh)
+		adap->cec_owner = NULL;
+
+	mutex_lock(&cecdev->fhs_lock);
+	list_del(&fh->list);
+	mutex_unlock(&cecdev->fhs_lock);
+
+	while (!list_empty(&fh->msgs)) {
+		struct cec_msg_entry *entry =
+			list_first_entry(&fh->msgs, struct cec_msg_entry, list);
+
+		list_del(&entry->list);
+		kfree(entry);
+	}
+	kfree(fh);
+
+	/* decrease the refcount unconditionally since the release()
+	   return value is ignored. */
+	put_device(&cecdev->dev);
+	filp->private_data = NULL;
+	return ret;
+}
+
+static const struct file_operations cec_devnode_fops = {
+	.owner = THIS_MODULE,
+	.open = cec_open,
+	.unlocked_ioctl = cec_ioctl,
+	.release = cec_release,
+	.poll = cec_poll,
+	.llseek = no_llseek,
+};
+
+/**
+ * cec_devnode_register - register a cec device node
+ * @cecdev: cec device node structure we want to register
+ *
+ * The registration code assigns minor numbers and registers the new device node
+ * with the kernel. An error is returned if no free minor number can be found,
+ * or if the registration of the device node fails.
+ *
+ * Zero is returned on success.
+ *
+ * Note that if the cec_devnode_register call fails, the release() callback of
+ * the cec_devnode structure is *not* called, so the caller is responsible for
+ * freeing any data.
+ */
+static int __must_check cec_devnode_register(struct cec_devnode *cecdev,
+		struct module *owner)
+{
+	int minor;
+	int ret;
+
+	/* Initialization */
+	INIT_LIST_HEAD(&cecdev->fhs);
+	mutex_init(&cecdev->fhs_lock);
+
+	/* Part 1: Find a free minor number */
+	mutex_lock(&cec_devnode_lock);
+	minor = find_next_zero_bit(cec_devnode_nums, CEC_NUM_DEVICES, 0);
+	if (minor == CEC_NUM_DEVICES) {
+		mutex_unlock(&cec_devnode_lock);
+		pr_err("could not get a free minor\n");
+		return -ENFILE;
+	}
+
+	set_bit(minor, cec_devnode_nums);
+	mutex_unlock(&cec_devnode_lock);
+
+	cecdev->minor = minor;
+
+	/* Part 2: Initialize and register the character device */
+	cdev_init(&cecdev->cdev, &cec_devnode_fops);
+	cecdev->cdev.owner = owner;
+
+	ret = cdev_add(&cecdev->cdev, MKDEV(MAJOR(cec_dev_t), cecdev->minor),
+									1);
+	if (ret < 0) {
+		pr_err("%s: cdev_add failed\n", __func__);
+		goto error;
+	}
+
+	/* Part 3: Register the cec device */
+	cecdev->dev.bus = &cec_bus_type;
+	cecdev->dev.devt = MKDEV(MAJOR(cec_dev_t), cecdev->minor);
+	cecdev->dev.release = cec_devnode_release;
+	if (cecdev->parent)
+		cecdev->dev.parent = cecdev->parent;
+	dev_set_name(&cecdev->dev, "cec%d", cecdev->minor);
+	ret = device_register(&cecdev->dev);
+	if (ret < 0) {
+		pr_err("%s: device_register failed\n", __func__);
+		goto error;
+	}
+
+	/* Part 4: Activate this minor. The char device can now be used. */
+	set_bit(CEC_FLAG_REGISTERED, &cecdev->flags);
+
+	return 0;
+
+error:
+	cdev_del(&cecdev->cdev);
+	clear_bit(cecdev->minor, cec_devnode_nums);
+	return ret;
+}
+
+/**
+ * cec_devnode_unregister - unregister a cec device node
+ * @cecdev: the device node to unregister
+ *
+ * This unregisters the passed device. Future open calls will be met with
+ * errors.
+ *
+ * This function can safely be called if the device node has never been
+ * registered or has already been unregistered.
+ */
+static void cec_devnode_unregister(struct cec_devnode *cecdev)
+{
+	/* Check if cecdev was ever registered at all */
+	if (!cec_devnode_is_registered(cecdev))
+		return;
+
+	mutex_lock(&cec_devnode_lock);
+	clear_bit(CEC_FLAG_REGISTERED, &cecdev->flags);
+	mutex_unlock(&cec_devnode_lock);
+	device_unregister(&cecdev->dev);
+}
+
+int cec_create_adapter(struct cec_adapter *adap, const char *name, u32 caps,
+		       u8 ninputs, struct module *owner, struct device *parent)
+{
+	int res = 0;
+
+	adap->owner = owner;
+	if (WARN_ON(!owner))
+		return -ENXIO;
+	adap->devnode.parent = parent;
+	if (WARN_ON(!parent))
+		return -ENXIO;
+	adap->name = name;
+	adap->phys_addr = CEC_PHYS_ADDR_INVALID;
+	adap->capabilities = caps;
+	adap->ninputs = ninputs;
+	adap->is_source = caps & CEC_CAP_IS_SOURCE;
+	if (WARN_ON(!adap->ninputs && !adap->is_source))
+		return -ENXIO;
+	adap->cec_version = CEC_OP_CEC_VERSION_2_0;
+	adap->vendor_id = CEC_VENDOR_ID_NONE;
+	adap->available_log_addrs = 1;
+	adap->sequence = 0;
+	memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs));
+	mutex_init(&adap->lock);
+	INIT_LIST_HEAD(&adap->transmit_queue);
+	INIT_LIST_HEAD(&adap->wait_queue);
+	adap->kthread = kthread_run(cec_thread_func, adap, "cec-%s", name);
+	init_waitqueue_head(&adap->kthread_waitq);
+	if (IS_ERR(adap->kthread)) {
+		pr_err("cec-%s: kernel_thread() failed\n", name);
+		return PTR_ERR(adap->kthread);
+	}
+	if (caps) {
+		res = cec_devnode_register(&adap->devnode, adap->owner);
+		if (res) {
+			kthread_stop(adap->kthread);
+			return res;
+		}
+	}
+
+	if (!(caps & CEC_CAP_RC))
+		return 0;
+
+	/* Prepare the RC input device */
+	adap->rc = rc_allocate_device();
+	if (!adap->rc) {
+		pr_err("cec-%s: failed to allocate memory for rc_dev\n", name);
+		cec_devnode_unregister(&adap->devnode);
+		kthread_stop(adap->kthread);
+		return -ENOMEM;
+	}
+
+	snprintf(adap->input_name, sizeof(adap->input_name), "RC for %s", name);
+	snprintf(adap->input_phys, sizeof(adap->input_phys), "%s/input0", name);
+	strlcpy(adap->input_drv, name, sizeof(adap->input_drv));
+
+	adap->rc->input_name = adap->input_name;
+	adap->rc->input_phys = adap->input_phys;
+	adap->rc->input_id.bustype = BUS_CEC;
+	adap->rc->input_id.vendor = 0;
+	adap->rc->input_id.product = 0;
+	adap->rc->input_id.version = 1;
+	adap->rc->dev.parent = adap->devnode.parent;
+	adap->rc->driver_name = adap->input_drv;
+	adap->rc->driver_type = RC_DRIVER_CEC;
+	adap->rc->allowed_protocols = RC_BIT_CEC;
+	adap->rc->priv = adap;
+	adap->rc->map_name = RC_MAP_CEC;
+	adap->rc->timeout = MS_TO_NS(100);
+
+	res = rc_register_device(adap->rc);
+
+	if (res) {
+		pr_err("cec-%s: failed to prepare input device\n", name);
+		cec_devnode_unregister(&adap->devnode);
+		rc_free_device(adap->rc);
+		kthread_stop(adap->kthread);
+	}
+
+	return res;
+}
+EXPORT_SYMBOL_GPL(cec_create_adapter);
+
+void cec_delete_adapter(struct cec_adapter *adap)
+{
+	if (adap->kthread == NULL)
+		return;
+	kthread_stop(adap->kthread);
+	if (adap->kthread_config)
+		kthread_stop(adap->kthread_config);
+	if (adap->is_enabled)
+		cec_enable(adap, false);
+	rc_unregister_device(adap->rc);
+	if (cec_devnode_is_registered(&adap->devnode))
+		cec_devnode_unregister(&adap->devnode);
+}
+EXPORT_SYMBOL_GPL(cec_delete_adapter);
+
+/*
+ *	Initialise cec for linux
+ */
+static int __init cec_devnode_init(void)
+{
+	int ret;
+
+	pr_info("Linux cec interface: v0.10\n");
+	ret = alloc_chrdev_region(&cec_dev_t, 0, CEC_NUM_DEVICES,
+				  CEC_NAME);
+	if (ret < 0) {
+		pr_warn("cec: unable to allocate major\n");
+		return ret;
+	}
+
+	ret = bus_register(&cec_bus_type);
+	if (ret < 0) {
+		unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
+		pr_warn("cec: bus_register failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void __exit cec_devnode_exit(void)
+{
+	bus_unregister(&cec_bus_type);
+	unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES);
+}
+
+subsys_initcall(cec_devnode_init);
+module_exit(cec_devnode_exit)
+
+MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
+MODULE_DESCRIPTION("Device node registration for cec drivers");
+MODULE_LICENSE("GPL");
diff --git a/include/media/cec.h b/include/media/cec.h
new file mode 100644
index 0000000..8f01c5d
--- /dev/null
+++ b/include/media/cec.h
@@ -0,0 +1,178 @@
+#ifndef _CEC_DEVNODE_H
+#define _CEC_DEVNODE_H
+
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/kthread.h>
+#include <linux/timer.h>
+#include <linux/cec-funcs.h>
+#include <media/rc-core.h>
+
+#define cec_phys_addr_exp(pa) \
+	((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf
+
+/*
+ * Flag to mark the cec_devnode struct as registered. Drivers must not touch
+ * this flag directly, it will be set and cleared by cec_devnode_register and
+ * cec_devnode_unregister.
+ */
+#define CEC_FLAG_REGISTERED	0
+
+/**
+ * struct cec_devnode - cec device node
+ * @parent:	parent device
+ * @minor:	device node minor number
+ * @flags:	flags, combination of the CEC_FLAG_* constants
+ *
+ * This structure represents a cec-related device node.
+ *
+ * The @parent is a physical device. It must be set by core or device drivers
+ * before registering the node.
+ */
+struct cec_devnode {
+	/* sysfs */
+	struct device dev;		/* cec device */
+	struct cdev cdev;		/* character device */
+	struct device *parent;		/* device parent */
+
+	/* device info */
+	int minor;
+	unsigned long flags;		/* Use bitops to access flags */
+	struct mutex fhs_lock;
+	struct list_head fhs;		/* cec_fh list */
+
+	/* callbacks */
+	void (*release)(struct cec_devnode *cecdev);
+};
+
+static inline int cec_devnode_is_registered(struct cec_devnode *cecdev)
+{
+	return test_bit(CEC_FLAG_REGISTERED, &cecdev->flags);
+}
+
+struct cec_adapter;
+struct cec_data;
+
+struct cec_data {
+	struct list_head list;
+	struct cec_adapter *adap;
+	struct cec_msg msg;
+	struct cec_fh *fh;
+	struct delayed_work work;
+	struct completion c;
+	bool blocking;
+	bool completed;
+};
+
+struct cec_msg_entry {
+	struct list_head	list;
+	struct cec_msg		msg;
+};
+
+#define CEC_NUM_EVENTS		CEC_EVENT_LOST_MSGS
+
+struct cec_fh {
+	struct list_head	list;
+	struct cec_adapter	*adap;
+	bool			monitor;
+
+	/* Events */
+	wait_queue_head_t	wait;
+	struct cec_event	events[CEC_NUM_EVENTS];
+	struct mutex		lock;
+	struct list_head	msgs; /* queued messages */
+	unsigned int		queued_msgs;
+};
+
+/*
+ * The minimum message length you can receive (excepting poll messages) is 2.
+ * With a transfer rate of at most 36 bytes per second this makes 18 messages
+ * per second worst case.
+ *
+ * We queue at most 10 seconds worth of messages.
+ */
+#define CEC_MAX_MSG_QUEUE_SZ		(18 * 10)
+
+struct cec_adapter {
+	struct module *owner;
+	const char *name;
+	struct cec_devnode devnode;
+	struct mutex lock;
+	struct rc_dev *rc;
+
+	struct list_head transmit_queue;
+	struct list_head wait_queue;
+	struct cec_data *transmitting;
+
+	struct task_struct *kthread_config;
+
+	struct task_struct *kthread;
+	wait_queue_head_t kthread_waitq;
+	wait_queue_head_t waitq;
+
+	/* Can be set by the main driver: */
+	u32 capabilities;
+	u8 available_log_addrs;
+	u8 pwr_state;
+	u16 phys_addr;
+	u32 vendor_id;
+	u8 cec_version;
+
+	u8 ninputs;
+	u16 connected_inputs;
+	bool is_source;
+	bool is_enabled;
+	bool is_configuring;
+	bool is_configured;
+	u8 num_log_addrs;
+	struct cec_fh *cec_owner;
+	u8 prim_device[CEC_MAX_LOG_ADDRS];
+	u8 log_addr_type[CEC_MAX_LOG_ADDRS];
+	u8 log_addr[CEC_MAX_LOG_ADDRS];
+	u8 all_device_types[CEC_MAX_LOG_ADDRS];
+	u8 features[CEC_MAX_LOG_ADDRS][12];
+	u16 phys_addrs[15];
+	char osd_name[15];
+	u8 passthrough;
+	u32 sequence;
+
+	char input_name[32];
+	char input_phys[32];
+	char input_drv[32];
+
+	int (*adap_enable)(struct cec_adapter *adap, bool enable);
+	int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
+	int (*adap_transmit)(struct cec_adapter *adap, u32 timeout_ms, struct cec_msg *msg);
+
+	int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
+
+	/* High-level callbacks */
+	u8 (*source_cdc_hpd)(struct cec_adapter *adap, u8 cdc_hpd_state);
+	u8 (*sink_cdc_hpd)(struct cec_adapter *adap, u8 cdc_hpd_state, u8 cdc_hpd_error);
+	int (*sink_initiate_arc)(struct cec_adapter *adap);
+	int (*sink_terminate_arc)(struct cec_adapter *adap);
+	int (*source_arc_initiated)(struct cec_adapter *adap);
+	int (*source_arc_terminated)(struct cec_adapter *adap);
+};
+
+#define to_cec_adapter(node) container_of(node, struct cec_adapter, devnode)
+
+int cec_create_adapter(struct cec_adapter *adap, const char *name, u32 caps,
+		       u8 ninputs, struct module *owner, struct device *parent);
+void cec_delete_adapter(struct cec_adapter *adap);
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg,
+		     bool block);
+int cec_claim_log_addrs(struct cec_adapter *adap,
+			struct cec_log_addrs *log_addrs, bool block);
+int cec_enable(struct cec_adapter *adap, bool enable);
+u8 cec_sink_cdc_hpd(struct cec_adapter *adap, u8 input_port, u8 cdc_hpd_state);
+void cec_log_status(struct cec_adapter *adap);
+
+/* Called by the adapter */
+void cec_transmit_done(struct cec_adapter *adap, u32 status);
+void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg);
+void cec_connected_inputs(struct cec_adapter *adap, u16 connected_inputs);
+
+#endif /* _CEC_DEVNODE_H */
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 1ff9942..fef06f9 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -81,6 +81,8 @@ header-y += capi.h
 header-y += cciss_defs.h
 header-y += cciss_ioctl.h
 header-y += cdrom.h
+header-y += cec.h
+header-y += cec-funcs.h
 header-y += cgroupstats.h
 header-y += chio.h
 header-y += cm4000_cs.h
diff --git a/include/uapi/linux/cec-funcs.h b/include/uapi/linux/cec-funcs.h
new file mode 100644
index 0000000..b27b045
--- /dev/null
+++ b/include/uapi/linux/cec-funcs.h
@@ -0,0 +1,1771 @@
+#ifndef _CEC_FUNCS_H
+#define _CEC_FUNCS_H
+
+#include <linux/cec.h>
+
+/* One Touch Play Feature */
+static inline void cec_msg_active_source(struct cec_msg *msg, __u16 phys_addr)
+{
+	msg->len = 4;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_ACTIVE_SOURCE;
+	msg->msg[2] = phys_addr >> 8;
+	msg->msg[3] = phys_addr & 0xff;
+}
+
+static inline void cec_ops_active_source(const struct cec_msg *msg,
+					 __u16 *phys_addr)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+}
+
+static inline void cec_msg_image_view_on(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_IMAGE_VIEW_ON;
+}
+
+static inline void cec_msg_text_view_on(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_TEXT_VIEW_ON;
+}
+
+
+/* Routing Control Feature */
+static inline void cec_msg_inactive_source(struct cec_msg *msg,
+					   __u16 phys_addr)
+{
+	msg->len = 4;
+	msg->msg[1] = CEC_MSG_INACTIVE_SOURCE;
+	msg->msg[2] = phys_addr >> 8;
+	msg->msg[3] = phys_addr & 0xff;
+}
+
+static inline void cec_ops_inactive_source(const struct cec_msg *msg,
+					   __u16 *phys_addr)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+}
+
+static inline void cec_msg_request_active_source(struct cec_msg *msg,
+						 bool reply)
+{
+	msg->len = 2;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_REQUEST_ACTIVE_SOURCE;
+	msg->reply = reply ? CEC_MSG_ACTIVE_SOURCE : 0;
+}
+
+static inline void cec_msg_routing_information(struct cec_msg *msg,
+					       __u16 phys_addr)
+{
+	msg->len = 4;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_ROUTING_INFORMATION;
+	msg->msg[2] = phys_addr >> 8;
+	msg->msg[3] = phys_addr & 0xff;
+}
+
+static inline void cec_ops_routing_information(const struct cec_msg *msg,
+					       __u16 *phys_addr)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+}
+
+static inline void cec_msg_routing_change(struct cec_msg *msg,
+					  bool reply,
+					  __u16 orig_phys_addr,
+					  __u16 new_phys_addr)
+{
+	msg->len = 6;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_ROUTING_CHANGE;
+	msg->msg[2] = orig_phys_addr >> 8;
+	msg->msg[3] = orig_phys_addr & 0xff;
+	msg->msg[4] = new_phys_addr >> 8;
+	msg->msg[5] = new_phys_addr & 0xff;
+	msg->reply = reply ? CEC_MSG_ROUTING_INFORMATION : 0;
+}
+
+static inline void cec_ops_routing_change(const struct cec_msg *msg,
+					  __u16 *orig_phys_addr,
+					  __u16 *new_phys_addr)
+{
+	*orig_phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*new_phys_addr = (msg->msg[4] << 8) | msg->msg[5];
+}
+
+static inline void cec_msg_set_stream_path(struct cec_msg *msg, __u16 phys_addr)
+{
+	msg->len = 4;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_SET_STREAM_PATH;
+	msg->msg[2] = phys_addr >> 8;
+	msg->msg[3] = phys_addr & 0xff;
+}
+
+static inline void cec_ops_set_stream_path(const struct cec_msg *msg,
+					   __u16 *phys_addr)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+}
+
+
+/* Standby Feature */
+static inline void cec_msg_standby(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_STANDBY;
+}
+
+
+/* One Touch Record Feature */
+static inline void cec_msg_record_off(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_RECORD_OFF;
+}
+
+struct cec_op_arib_data {
+	__u16 transport_id;
+	__u16 service_id;
+	__u16 orig_network_id;
+};
+
+struct cec_op_atsc_data {
+	__u16 transport_id;
+	__u16 program_number;
+};
+
+struct cec_op_dvb_data {
+	__u16 transport_id;
+	__u16 service_id;
+	__u16 orig_network_id;
+};
+
+struct cec_op_channel_data {
+	__u8 channel_number_fmt;
+	__u16 major;
+	__u16 minor;
+};
+
+struct cec_op_digital_service_id {
+	__u8 service_id_method;
+	__u8 dig_bcast_system;
+	union {
+		struct cec_op_arib_data arib;
+		struct cec_op_atsc_data atsc;
+		struct cec_op_dvb_data dvb;
+		struct cec_op_channel_data channel;
+	};
+};
+
+struct cec_op_record_src {
+	__u8 type;
+	union {
+		struct cec_op_digital_service_id digital;
+		struct {
+			__u8 ana_bcast_type;
+			__u16 ana_freq;
+			__u8 bcast_system;
+		} analog;
+		struct {
+			__u8 plug;
+		} ext_plug;
+		struct {
+			__u16 phys_addr;
+		} ext_phys_addr;
+	};
+};
+
+static inline void cec_set_digital_service_id(__u8 *msg,
+	      const struct cec_op_digital_service_id *digital)
+{
+	*msg++ = (digital->service_id_method << 7) | digital->dig_bcast_system;
+	if (digital->service_id_method == CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL) {
+		*msg++ = (digital->channel.channel_number_fmt << 2) |
+			 (digital->channel.major >> 8);
+		*msg++ = digital->channel.major && 0xff;
+		*msg++ = digital->channel.minor >> 8;
+		*msg++ = digital->channel.minor & 0xff;
+		*msg++ = 0;
+		*msg++ = 0;
+		return;
+	}
+	switch (digital->dig_bcast_system) {
+	case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN:
+	case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE:
+	case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT:
+	case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T:
+		*msg++ = digital->atsc.transport_id >> 8;
+		*msg++ = digital->atsc.transport_id & 0xff;
+		*msg++ = digital->atsc.program_number >> 8;
+		*msg++ = digital->atsc.program_number & 0xff;
+		*msg++ = 0;
+		*msg++ = 0;
+		break;
+	default:
+		*msg++ = digital->dvb.transport_id >> 8;
+		*msg++ = digital->dvb.transport_id & 0xff;
+		*msg++ = digital->dvb.service_id >> 8;
+		*msg++ = digital->dvb.service_id & 0xff;
+		*msg++ = digital->dvb.orig_network_id >> 8;
+		*msg++ = digital->dvb.orig_network_id & 0xff;
+		break;
+	}
+}
+
+static inline void cec_get_digital_service_id(const __u8 *msg,
+	      struct cec_op_digital_service_id *digital)
+{
+	digital->service_id_method = msg[0] >> 7;
+	digital->dig_bcast_system = msg[0] & 0x7f;
+	if (digital->service_id_method == CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL) {
+		digital->channel.channel_number_fmt = msg[1] >> 2;
+		digital->channel.major = ((msg[1] & 3) << 6) | msg[2];
+		digital->channel.minor = (msg[3] << 8) | msg[4];
+		return;
+	}
+	digital->dvb.transport_id = (msg[1] << 8) | msg[2];
+	digital->dvb.service_id = (msg[3] << 8) | msg[4];
+	digital->dvb.orig_network_id = (msg[5] << 8) | msg[6];
+}
+
+static inline void cec_msg_record_on_own(struct cec_msg *msg)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_RECORD_ON;
+	msg->msg[2] = CEC_OP_RECORD_SRC_OWN;
+}
+
+static inline void cec_msg_record_on_digital(struct cec_msg *msg,
+			     const struct cec_op_digital_service_id *digital)
+{
+	msg->len = 10;
+	msg->msg[1] = CEC_MSG_RECORD_ON;
+	msg->msg[2] = CEC_OP_RECORD_SRC_DIGITAL;
+	cec_set_digital_service_id(msg->msg + 3, digital);
+}
+
+static inline void cec_msg_record_on_analog(struct cec_msg *msg,
+					    __u8 ana_bcast_type,
+					    __u16 ana_freq,
+					    __u8 bcast_system)
+{
+	msg->len = 7;
+	msg->msg[1] = CEC_MSG_RECORD_ON;
+	msg->msg[2] = CEC_OP_RECORD_SRC_ANALOG;
+	msg->msg[3] = ana_bcast_type;
+	msg->msg[4] = ana_freq >> 8;
+	msg->msg[5] = ana_freq & 0xff;
+	msg->msg[6] = bcast_system;
+}
+
+static inline void cec_msg_record_on_plug(struct cec_msg *msg,
+					  __u8 plug)
+{
+	msg->len = 4;
+	msg->msg[1] = CEC_MSG_RECORD_ON;
+	msg->msg[2] = CEC_OP_RECORD_SRC_EXT_PLUG;
+	msg->msg[3] = plug;
+}
+
+static inline void cec_msg_record_on_phys_addr(struct cec_msg *msg,
+					       __u16 phys_addr)
+{
+	msg->len = 5;
+	msg->msg[1] = CEC_MSG_RECORD_ON;
+	msg->msg[2] = CEC_OP_RECORD_SRC_EXT_PHYS_ADDR;
+	msg->msg[3] = phys_addr >> 8;
+	msg->msg[4] = phys_addr & 0xff;
+}
+
+static inline void cec_msg_record_on(struct cec_msg *msg,
+				     const struct cec_op_record_src *rec_src)
+{
+	switch (rec_src->type) {
+	case CEC_OP_RECORD_SRC_OWN:
+		cec_msg_record_on_own(msg);
+		break;
+	case CEC_OP_RECORD_SRC_DIGITAL:
+		cec_msg_record_on_digital(msg, &rec_src->digital);
+		break;
+	case CEC_OP_RECORD_SRC_ANALOG:
+		cec_msg_record_on_analog(msg,
+					 rec_src->analog.ana_bcast_type,
+					 rec_src->analog.ana_freq,
+					 rec_src->analog.bcast_system);
+		break;
+	case CEC_OP_RECORD_SRC_EXT_PLUG:
+		cec_msg_record_on_plug(msg, rec_src->ext_plug.plug);
+		break;
+	case CEC_OP_RECORD_SRC_EXT_PHYS_ADDR:
+		cec_msg_record_on_phys_addr(msg,
+					    rec_src->ext_phys_addr.phys_addr);
+		break;
+	}
+}
+
+static inline void cec_ops_record_on(const struct cec_msg *msg,
+				     struct cec_op_record_src *rec_src)
+{
+	rec_src->type = msg->msg[2];
+	switch (rec_src->type) {
+	case CEC_OP_RECORD_SRC_OWN:
+		break;
+	case CEC_OP_RECORD_SRC_DIGITAL:
+		cec_get_digital_service_id(msg->msg + 3, &rec_src->digital);
+		break;
+	case CEC_OP_RECORD_SRC_ANALOG:
+		rec_src->analog.ana_bcast_type = msg->msg[3];
+		rec_src->analog.ana_freq =
+			(msg->msg[4] << 8) | msg->msg[5];
+		rec_src->analog.bcast_system = msg->msg[6];
+		break;
+	case CEC_OP_RECORD_SRC_EXT_PLUG:
+		rec_src->ext_plug.plug = msg->msg[3];
+		break;
+	case CEC_OP_RECORD_SRC_EXT_PHYS_ADDR:
+		rec_src->ext_phys_addr.phys_addr =
+			(msg->msg[3] << 8) | msg->msg[4];
+		break;
+	}
+}
+
+static inline void cec_msg_record_status(struct cec_msg *msg, __u8 rec_status)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_RECORD_STATUS;
+	msg->msg[2] = rec_status;
+}
+
+static inline void cec_ops_record_status(const struct cec_msg *msg,
+					 __u8 *rec_status)
+{
+	*rec_status = msg->msg[2];
+}
+
+static inline void cec_msg_record_tv_screen(struct cec_msg *msg,
+					    bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_RECORD_TV_SCREEN;
+	msg->reply = reply ? CEC_MSG_RECORD_ON : 0;
+}
+
+
+/* Timer Programming Feature */
+static inline void cec_msg_timer_status(struct cec_msg *msg,
+					__u8 timer_overlap_warning,
+					__u8 media_info,
+					__u8 prog_info,
+					__u8 prog_error,
+					__u8 duration_hr,
+					__u8 duration_min)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_TIMER_STATUS;
+	msg->msg[2] = (timer_overlap_warning << 7) |
+		(media_info << 5) |
+		(prog_info ? 0x10 : 0) |
+		(prog_info ? prog_info : prog_error);
+	if (prog_info == CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE ||
+	    prog_info == CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE ||
+	    prog_error == CEC_OP_PROG_ERROR_DUPLICATE) {
+		msg->len += 2;
+		msg->msg[3] = ((duration_hr / 10) << 4) | (duration_hr % 10);
+		msg->msg[4] = ((duration_min / 10) << 4) | (duration_min % 10);
+	}
+}
+
+static inline void cec_ops_timer_status(struct cec_msg *msg,
+					__u8 *timer_overlap_warning,
+					__u8 *media_info,
+					__u8 *prog_info,
+					__u8 *prog_error,
+					__u8 *duration_hr,
+					__u8 *duration_min)
+{
+	*timer_overlap_warning = msg->msg[2] >> 7;
+	*media_info = (msg->msg[2] >> 5) & 3;
+	if (msg->msg[2] & 0x10) {
+		*prog_info = msg->msg[2] & 0xf;
+		*prog_error = 0;
+	} else {
+		*prog_info = 0;
+		*prog_error = msg->msg[2] & 0xf;
+	}
+	if (*prog_info == CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE ||
+	    *prog_info == CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE ||
+	    *prog_error == CEC_OP_PROG_ERROR_DUPLICATE) {
+		*duration_hr = (msg->msg[3] >> 4) * 10 + (msg->msg[3] & 0xf);
+		*duration_min = (msg->msg[4] >> 4) * 10 + (msg->msg[4] & 0xf);
+	} else {
+		*duration_hr = *duration_min = 0;
+	}
+}
+
+static inline void cec_msg_timer_cleared_status(struct cec_msg *msg,
+						__u8 timer_cleared_status)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_TIMER_CLEARED_STATUS;
+	msg->msg[2] = timer_cleared_status;
+}
+
+static inline void cec_ops_timer_cleared_status(struct cec_msg *msg,
+						__u8 *timer_cleared_status)
+{
+	*timer_cleared_status = msg->msg[2];
+}
+
+static inline void cec_msg_clear_analogue_timer(struct cec_msg *msg,
+						bool reply,
+						__u8 day,
+						__u8 month,
+						__u8 start_hr,
+						__u8 start_min,
+						__u8 duration_hr,
+						__u8 duration_min,
+						__u8 recording_seq,
+						__u8 ana_bcast_type,
+						__u16 ana_freq,
+						__u8 bcast_system)
+{
+	msg->len = 13;
+	msg->msg[1] = CEC_MSG_CLEAR_ANALOGUE_TIMER;
+	msg->msg[2] = day;
+	msg->msg[3] = month;
+	/* Hours and minutes are in BCD format */
+	msg->msg[4] = ((start_hr / 10) << 4) | (start_hr % 10);
+	msg->msg[5] = ((start_min / 10) << 4) | (start_min % 10);
+	msg->msg[6] = ((duration_hr / 10) << 4) | (duration_hr % 10);
+	msg->msg[7] = ((duration_min / 10) << 4) | (duration_min % 10);
+	msg->msg[8] = recording_seq;
+	msg->msg[9] = ana_bcast_type;
+	msg->msg[10] = ana_freq >> 8;
+	msg->msg[11] = ana_freq & 0xff;
+	msg->msg[12] = bcast_system;
+	msg->reply = reply ? CEC_MSG_TIMER_CLEARED_STATUS : 0;
+}
+
+static inline void cec_ops_clear_analogue_timer(struct cec_msg *msg,
+						__u8 *day,
+						__u8 *month,
+						__u8 *start_hr,
+						__u8 *start_min,
+						__u8 *duration_hr,
+						__u8 *duration_min,
+						__u8 *recording_seq,
+						__u8 *ana_bcast_type,
+						__u16 *ana_freq,
+						__u8 *bcast_system)
+{
+	*day = msg->msg[2];
+	*month = msg->msg[3];
+	/* Hours and minutes are in BCD format */
+	*start_hr = (msg->msg[4] >> 4) * 10 + (msg->msg[4] & 0xf);
+	*start_min = (msg->msg[5] >> 4) * 10 + (msg->msg[5] & 0xf);
+	*duration_hr = (msg->msg[6] >> 4) * 10 + (msg->msg[6] & 0xf);
+	*duration_min = (msg->msg[7] >> 4) * 10 + (msg->msg[7] & 0xf);
+	*recording_seq = msg->msg[8];
+	*ana_bcast_type = msg->msg[9];
+	*ana_freq = (msg->msg[10] << 8) | msg->msg[11];
+	*bcast_system = msg->msg[12];
+}
+
+static inline void cec_msg_clear_digital_timer(struct cec_msg *msg,
+					       bool reply,
+					       __u8 day,
+					       __u8 month,
+					       __u8 start_hr,
+					       __u8 start_min,
+					       __u8 duration_hr,
+					       __u8 duration_min,
+					       __u8 recording_seq,
+					       const struct cec_op_digital_service_id *digital)
+{
+	msg->len = 16;
+	msg->reply = reply ? CEC_MSG_TIMER_CLEARED_STATUS : 0;
+	msg->msg[1] = CEC_MSG_CLEAR_DIGITAL_TIMER;
+	msg->msg[2] = day;
+	msg->msg[3] = month;
+	/* Hours and minutes are in BCD format */
+	msg->msg[4] = ((start_hr / 10) << 4) | (start_hr % 10);
+	msg->msg[5] = ((start_min / 10) << 4) | (start_min % 10);
+	msg->msg[6] = ((duration_hr / 10) << 4) | (duration_hr % 10);
+	msg->msg[7] = ((duration_min / 10) << 4) | (duration_min % 10);
+	msg->msg[8] = recording_seq;
+	cec_set_digital_service_id(msg->msg + 9, digital);
+}
+
+static inline void cec_ops_clear_digital_timer(struct cec_msg *msg,
+					       __u8 *day,
+					       __u8 *month,
+					       __u8 *start_hr,
+					       __u8 *start_min,
+					       __u8 *duration_hr,
+					       __u8 *duration_min,
+					       __u8 *recording_seq,
+					       struct cec_op_digital_service_id *digital)
+{
+	*day = msg->msg[2];
+	*month = msg->msg[3];
+	/* Hours and minutes are in BCD format */
+	*start_hr = (msg->msg[4] >> 4) * 10 + (msg->msg[4] & 0xf);
+	*start_min = (msg->msg[5] >> 4) * 10 + (msg->msg[5] & 0xf);
+	*duration_hr = (msg->msg[6] >> 4) * 10 + (msg->msg[6] & 0xf);
+	*duration_min = (msg->msg[7] >> 4) * 10 + (msg->msg[7] & 0xf);
+	*recording_seq = msg->msg[8];
+	cec_get_digital_service_id(msg->msg + 9, digital);
+}
+
+static inline void cec_msg_clear_ext_timer(struct cec_msg *msg,
+					   bool reply,
+					   __u8 day,
+					   __u8 month,
+					   __u8 start_hr,
+					   __u8 start_min,
+					   __u8 duration_hr,
+					   __u8 duration_min,
+					   __u8 recording_seq,
+					   __u8 ext_src_spec,
+					   __u8 plug,
+					   __u16 phys_addr)
+{
+	msg->len = 13;
+	msg->msg[1] = CEC_MSG_CLEAR_EXT_TIMER;
+	msg->msg[2] = day;
+	msg->msg[3] = month;
+	/* Hours and minutes are in BCD format */
+	msg->msg[4] = ((start_hr / 10) << 4) | (start_hr % 10);
+	msg->msg[5] = ((start_min / 10) << 4) | (start_min % 10);
+	msg->msg[6] = ((duration_hr / 10) << 4) | (duration_hr % 10);
+	msg->msg[7] = ((duration_min / 10) << 4) | (duration_min % 10);
+	msg->msg[8] = recording_seq;
+	msg->msg[9] = ext_src_spec;
+	msg->msg[10] = plug;
+	msg->msg[11] = phys_addr >> 8;
+	msg->msg[12] = phys_addr & 0xff;
+	msg->reply = reply ? CEC_MSG_TIMER_CLEARED_STATUS : 0;
+}
+
+static inline void cec_ops_clear_ext_timer(struct cec_msg *msg,
+					   __u8 *day,
+					   __u8 *month,
+					   __u8 *start_hr,
+					   __u8 *start_min,
+					   __u8 *duration_hr,
+					   __u8 *duration_min,
+					   __u8 *recording_seq,
+					   __u8 *ext_src_spec,
+					   __u8 *plug,
+					   __u16 *phys_addr)
+{
+	*day = msg->msg[2];
+	*month = msg->msg[3];
+	/* Hours and minutes are in BCD format */
+	*start_hr = (msg->msg[4] >> 4) * 10 + (msg->msg[4] & 0xf);
+	*start_min = (msg->msg[5] >> 4) * 10 + (msg->msg[5] & 0xf);
+	*duration_hr = (msg->msg[6] >> 4) * 10 + (msg->msg[6] & 0xf);
+	*duration_min = (msg->msg[7] >> 4) * 10 + (msg->msg[7] & 0xf);
+	*recording_seq = msg->msg[8];
+	*ext_src_spec = msg->msg[9];
+	*plug = msg->msg[10];
+	*phys_addr = (msg->msg[11] << 8) | msg->msg[12];
+}
+
+static inline void cec_msg_set_analogue_timer(struct cec_msg *msg,
+					      bool reply,
+					      __u8 day,
+					      __u8 month,
+					      __u8 start_hr,
+					      __u8 start_min,
+					      __u8 duration_hr,
+					      __u8 duration_min,
+					      __u8 recording_seq,
+					      __u8 ana_bcast_type,
+					      __u16 ana_freq,
+					      __u8 bcast_system)
+{
+	msg->len = 13;
+	msg->msg[1] = CEC_MSG_SET_ANALOGUE_TIMER;
+	msg->msg[2] = day;
+	msg->msg[3] = month;
+	/* Hours and minutes are in BCD format */
+	msg->msg[4] = ((start_hr / 10) << 4) | (start_hr % 10);
+	msg->msg[5] = ((start_min / 10) << 4) | (start_min % 10);
+	msg->msg[6] = ((duration_hr / 10) << 4) | (duration_hr % 10);
+	msg->msg[7] = ((duration_min / 10) << 4) | (duration_min % 10);
+	msg->msg[8] = recording_seq;
+	msg->msg[9] = ana_bcast_type;
+	msg->msg[10] = ana_freq >> 8;
+	msg->msg[11] = ana_freq & 0xff;
+	msg->msg[12] = bcast_system;
+	msg->reply = reply ? CEC_MSG_TIMER_STATUS : 0;
+}
+
+static inline void cec_ops_set_analogue_timer(struct cec_msg *msg,
+					      __u8 *day,
+					      __u8 *month,
+					      __u8 *start_hr,
+					      __u8 *start_min,
+					      __u8 *duration_hr,
+					      __u8 *duration_min,
+					      __u8 *recording_seq,
+					      __u8 *ana_bcast_type,
+					      __u16 *ana_freq,
+					      __u8 *bcast_system)
+{
+	*day = msg->msg[2];
+	*month = msg->msg[3];
+	/* Hours and minutes are in BCD format */
+	*start_hr = (msg->msg[4] >> 4) * 10 + (msg->msg[4] & 0xf);
+	*start_min = (msg->msg[5] >> 4) * 10 + (msg->msg[5] & 0xf);
+	*duration_hr = (msg->msg[6] >> 4) * 10 + (msg->msg[6] & 0xf);
+	*duration_min = (msg->msg[7] >> 4) * 10 + (msg->msg[7] & 0xf);
+	*recording_seq = msg->msg[8];
+	*ana_bcast_type = msg->msg[9];
+	*ana_freq = (msg->msg[10] << 8) | msg->msg[11];
+	*bcast_system = msg->msg[12];
+}
+
+static inline void cec_msg_set_digital_timer(struct cec_msg *msg,
+					     bool reply,
+					     __u8 day,
+					     __u8 month,
+					     __u8 start_hr,
+					     __u8 start_min,
+					     __u8 duration_hr,
+					     __u8 duration_min,
+					     __u8 recording_seq,
+					     const struct cec_op_digital_service_id *digital)
+{
+	msg->len = 16;
+	msg->reply = reply ? CEC_MSG_TIMER_STATUS : 0;
+	msg->msg[1] = CEC_MSG_SET_DIGITAL_TIMER;
+	msg->msg[2] = day;
+	msg->msg[3] = month;
+	/* Hours and minutes are in BCD format */
+	msg->msg[4] = ((start_hr / 10) << 4) | (start_hr % 10);
+	msg->msg[5] = ((start_min / 10) << 4) | (start_min % 10);
+	msg->msg[6] = ((duration_hr / 10) << 4) | (duration_hr % 10);
+	msg->msg[7] = ((duration_min / 10) << 4) | (duration_min % 10);
+	msg->msg[8] = recording_seq;
+	cec_set_digital_service_id(msg->msg + 9, digital);
+}
+
+static inline void cec_ops_set_digital_timer(struct cec_msg *msg,
+					     __u8 *day,
+					     __u8 *month,
+					     __u8 *start_hr,
+					     __u8 *start_min,
+					     __u8 *duration_hr,
+					     __u8 *duration_min,
+					     __u8 *recording_seq,
+					     struct cec_op_digital_service_id *digital)
+{
+	*day = msg->msg[2];
+	*month = msg->msg[3];
+	/* Hours and minutes are in BCD format */
+	*start_hr = (msg->msg[4] >> 4) * 10 + (msg->msg[4] & 0xf);
+	*start_min = (msg->msg[5] >> 4) * 10 + (msg->msg[5] & 0xf);
+	*duration_hr = (msg->msg[6] >> 4) * 10 + (msg->msg[6] & 0xf);
+	*duration_min = (msg->msg[7] >> 4) * 10 + (msg->msg[7] & 0xf);
+	*recording_seq = msg->msg[8];
+	cec_get_digital_service_id(msg->msg + 9, digital);
+}
+
+static inline void cec_msg_set_ext_timer(struct cec_msg *msg,
+					 bool reply,
+					 __u8 day,
+					 __u8 month,
+					 __u8 start_hr,
+					 __u8 start_min,
+					 __u8 duration_hr,
+					 __u8 duration_min,
+					 __u8 recording_seq,
+					 __u8 ext_src_spec,
+					 __u8 plug,
+					 __u16 phys_addr)
+{
+	msg->len = 13;
+	msg->msg[1] = CEC_MSG_SET_EXT_TIMER;
+	msg->msg[2] = day;
+	msg->msg[3] = month;
+	/* Hours and minutes are in BCD format */
+	msg->msg[4] = ((start_hr / 10) << 4) | (start_hr % 10);
+	msg->msg[5] = ((start_min / 10) << 4) | (start_min % 10);
+	msg->msg[6] = ((duration_hr / 10) << 4) | (duration_hr % 10);
+	msg->msg[7] = ((duration_min / 10) << 4) | (duration_min % 10);
+	msg->msg[8] = recording_seq;
+	msg->msg[9] = ext_src_spec;
+	msg->msg[10] = plug;
+	msg->msg[11] = phys_addr >> 8;
+	msg->msg[12] = phys_addr & 0xff;
+	msg->reply = reply ? CEC_MSG_TIMER_STATUS : 0;
+}
+
+static inline void cec_ops_set_ext_timer(struct cec_msg *msg,
+					 __u8 *day,
+					 __u8 *month,
+					 __u8 *start_hr,
+					 __u8 *start_min,
+					 __u8 *duration_hr,
+					 __u8 *duration_min,
+					 __u8 *recording_seq,
+					 __u8 *ext_src_spec,
+					 __u8 *plug,
+					 __u16 *phys_addr)
+{
+	*day = msg->msg[2];
+	*month = msg->msg[3];
+	/* Hours and minutes are in BCD format */
+	*start_hr = (msg->msg[4] >> 4) * 10 + (msg->msg[4] & 0xf);
+	*start_min = (msg->msg[5] >> 4) * 10 + (msg->msg[5] & 0xf);
+	*duration_hr = (msg->msg[6] >> 4) * 10 + (msg->msg[6] & 0xf);
+	*duration_min = (msg->msg[7] >> 4) * 10 + (msg->msg[7] & 0xf);
+	*recording_seq = msg->msg[8];
+	*ext_src_spec = msg->msg[9];
+	*plug = msg->msg[10];
+	*phys_addr = (msg->msg[11] << 8) | msg->msg[12];
+}
+
+static inline void cec_msg_set_timer_program_title(struct cec_msg *msg,
+						   const char *prog_title)
+{
+	unsigned len = strlen(prog_title);
+
+	if (len > 14)
+		len = 14;
+	msg->len = 2 + len;
+	msg->msg[1] = CEC_MSG_SET_TIMER_PROGRAM_TITLE;
+	memcpy(msg->msg + 2, prog_title, len);
+}
+
+static inline void cec_ops_set_timer_program_title(const struct cec_msg *msg,
+						   char *prog_title)
+{
+	unsigned len = msg->len - 2;
+
+	if (len > 14)
+		len = 14;
+	memcpy(prog_title, msg->msg + 2, len);
+	prog_title[len] = '\0';
+}
+
+/* System Information Feature */
+static inline void cec_msg_cec_version(struct cec_msg *msg, __u8 cec_version)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_CEC_VERSION;
+	msg->msg[2] = cec_version;
+}
+
+static inline void cec_ops_cec_version(const struct cec_msg *msg,
+				       __u8 *cec_version)
+{
+	*cec_version = msg->msg[2];
+}
+
+static inline void cec_msg_get_cec_version(struct cec_msg *msg,
+					   bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GET_CEC_VERSION;
+	msg->reply = reply ? CEC_MSG_CEC_VERSION : 0;
+}
+
+static inline void cec_msg_report_physical_addr(struct cec_msg *msg,
+						__u16 phys_addr, __u8 prim_devtype)
+{
+	msg->len = 5;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_REPORT_PHYSICAL_ADDR;
+	msg->msg[2] = phys_addr >> 8;
+	msg->msg[3] = phys_addr & 0xff;
+	msg->msg[4] = prim_devtype;
+}
+
+static inline void cec_ops_report_physical_addr(const struct cec_msg *msg,
+						__u16 *phys_addr, __u8 *prim_devtype)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*prim_devtype = msg->msg[4];
+}
+
+static inline void cec_msg_give_physical_addr(struct cec_msg *msg,
+					      bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GIVE_PHYSICAL_ADDR;
+	msg->reply = reply ? CEC_MSG_REPORT_PHYSICAL_ADDR : 0;
+}
+
+static inline void cec_msg_set_menu_language(struct cec_msg *msg,
+					     const char *language)
+{
+	msg->len = 5;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_SET_MENU_LANGUAGE;
+	memcpy(msg->msg + 2, language, 3);
+}
+
+static inline void cec_ops_set_menu_language(struct cec_msg *msg,
+					     char *language)
+{
+	memcpy(language, msg->msg + 2, 3);
+}
+
+static inline void cec_msg_get_menu_language(struct cec_msg *msg,
+					     bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GET_MENU_LANGUAGE;
+	msg->reply = reply ? CEC_MSG_SET_MENU_LANGUAGE : 0;
+}
+
+/*
+ * Assumes a single RC Profile byte and a single Device Features byte,
+ * i.e. no extended features are supported by this helper function.
+ */
+static inline void cec_msg_report_features(struct cec_msg *msg,
+					   __u8 cec_version, __u8 all_device_types,
+					   __u8 rc_profile, __u8 dev_features)
+{
+	msg->len = 6;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_REPORT_FEATURES;
+	msg->msg[2] = cec_version;
+	msg->msg[3] = all_device_types;
+	msg->msg[4] = rc_profile;
+	msg->msg[5] = dev_features;
+}
+
+static inline void cec_ops_report_features(const struct cec_msg *msg,
+					   __u8 *cec_version, __u8 *all_device_types,
+					   const __u8 **rc_profile, const __u8 **dev_features)
+{
+	const __u8 *p = &msg->msg[4];
+
+	*cec_version = msg->msg[2];
+	*all_device_types = msg->msg[3];
+	*rc_profile = p;
+	while (p < &msg->msg[14] && (*p & CEC_OP_FEAT_EXT))
+		p++;
+	if (!(*p & CEC_OP_FEAT_EXT)) {
+		*dev_features = p + 1;
+		while (p < &msg->msg[15] && (*p & CEC_OP_FEAT_EXT))
+			p++;
+	}
+	if (*p & CEC_OP_FEAT_EXT)
+		*rc_profile = *dev_features = NULL;
+}
+
+static inline void cec_msg_give_features(struct cec_msg *msg,
+					 bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GIVE_FEATURES;
+	msg->reply = reply ? CEC_MSG_REPORT_FEATURES : 0;
+}
+
+/* Deck Control Feature */
+static inline void cec_msg_deck_control(struct cec_msg *msg,
+					__u8 deck_control_mode)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_DECK_CONTROL;
+	msg->msg[2] = deck_control_mode;
+}
+
+static inline void cec_ops_deck_control(struct cec_msg *msg,
+					__u8 *deck_control_mode)
+{
+	*deck_control_mode = msg->msg[2];
+}
+
+static inline void cec_msg_deck_status(struct cec_msg *msg,
+				       __u8 deck_info)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_DECK_STATUS;
+	msg->msg[2] = deck_info;
+}
+
+static inline void cec_ops_deck_status(struct cec_msg *msg,
+				       __u8 *deck_info)
+{
+	*deck_info = msg->msg[2];
+}
+
+static inline void cec_msg_give_deck_status(struct cec_msg *msg,
+					    bool reply,
+					    __u8 status_req)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_GIVE_DECK_STATUS;
+	msg->msg[2] = status_req;
+	msg->reply = reply ? CEC_MSG_DECK_STATUS : 0;
+}
+
+static inline void cec_ops_give_deck_status(struct cec_msg *msg,
+					    __u8 *status_req)
+{
+	*status_req = msg->msg[2];
+}
+
+static inline void cec_msg_play(struct cec_msg *msg,
+				__u8 play_mode)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_PLAY;
+	msg->msg[2] = play_mode;
+}
+
+static inline void cec_ops_play(struct cec_msg *msg,
+				__u8 *play_mode)
+{
+	*play_mode = msg->msg[2];
+}
+
+
+/* Tuner Control Feature */
+struct cec_op_tuner_device_info {
+	__u8 rec_flag;
+	__u8 tuner_display_info;
+	bool is_analog;
+	union {
+		struct cec_op_digital_service_id digital;
+		struct {
+			__u8 ana_bcast_type;
+			__u16 ana_freq;
+			__u8 bcast_system;
+		} analog;
+	};
+};
+
+static inline void cec_msg_tuner_device_status_analog(struct cec_msg *msg,
+						      __u8 rec_flag,
+						      __u8 tuner_display_info,
+						      __u8 ana_bcast_type,
+						      __u16 ana_freq,
+						      __u8 bcast_system)
+{
+	msg->len = 7;
+	msg->msg[1] = CEC_MSG_TUNER_DEVICE_STATUS;
+	msg->msg[2] = (rec_flag << 7) | tuner_display_info;
+	msg->msg[3] = ana_bcast_type;
+	msg->msg[4] = ana_freq >> 8;
+	msg->msg[5] = ana_freq & 0xff;
+	msg->msg[6] = bcast_system;
+}
+
+static inline void cec_msg_tuner_device_status_digital(struct cec_msg *msg,
+		   __u8 rec_flag, __u8 tuner_display_info,
+		   const struct cec_op_digital_service_id *digital)
+{
+	msg->len = 10;
+	msg->msg[1] = CEC_MSG_TUNER_DEVICE_STATUS;
+	msg->msg[2] = (rec_flag << 7) | tuner_display_info;
+	cec_set_digital_service_id(msg->msg + 3, digital);
+}
+
+static inline void cec_msg_tuner_device_status(struct cec_msg *msg,
+			const struct cec_op_tuner_device_info *tuner_dev_info)
+{
+	if (tuner_dev_info->is_analog)
+		cec_msg_tuner_device_status_analog(msg,
+			tuner_dev_info->rec_flag,
+			tuner_dev_info->tuner_display_info,
+			tuner_dev_info->analog.ana_bcast_type,
+			tuner_dev_info->analog.ana_freq,
+			tuner_dev_info->analog.bcast_system);
+	else
+		cec_msg_tuner_device_status_digital(msg,
+			tuner_dev_info->rec_flag,
+			tuner_dev_info->tuner_display_info,
+			&tuner_dev_info->digital);
+}
+
+static inline void cec_ops_tuner_device_status(struct cec_msg *msg,
+					       struct cec_op_tuner_device_info *tuner_dev_info)
+{
+	tuner_dev_info->is_analog = msg->len < 10;
+	tuner_dev_info->rec_flag = msg->msg[2] >> 7;
+	tuner_dev_info->tuner_display_info = msg->msg[2] & 0x7f;
+	if (tuner_dev_info->is_analog) {
+		tuner_dev_info->analog.ana_bcast_type = msg->msg[3];
+		tuner_dev_info->analog.ana_freq = (msg->msg[4] << 8) | msg->msg[5];
+		tuner_dev_info->analog.bcast_system = msg->msg[6];
+		return;
+	}
+	cec_get_digital_service_id(msg->msg + 3, &tuner_dev_info->digital);
+}
+
+static inline void cec_msg_give_tuner_device_status(struct cec_msg *msg,
+						    bool reply,
+						    __u8 status_req)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_GIVE_TUNER_DEVICE_STATUS;
+	msg->msg[2] = status_req;
+	msg->reply = reply ? CEC_MSG_TUNER_DEVICE_STATUS : 0;
+}
+
+static inline void cec_ops_give_tuner_device_status(struct cec_msg *msg,
+						    __u8 *status_req)
+{
+	*status_req = msg->msg[2];
+}
+
+static inline void cec_msg_select_analogue_service(struct cec_msg *msg,
+						   __u8 ana_bcast_type,
+						   __u16 ana_freq,
+						   __u8 bcast_system)
+{
+	msg->len = 6;
+	msg->msg[1] = CEC_MSG_SELECT_ANALOGUE_SERVICE;
+	msg->msg[2] = ana_bcast_type;
+	msg->msg[3] = ana_freq >> 8;
+	msg->msg[4] = ana_freq & 0xff;
+	msg->msg[5] = bcast_system;
+}
+
+static inline void cec_ops_select_analogue_service(struct cec_msg *msg,
+						   __u8 *ana_bcast_type,
+						   __u16 *ana_freq,
+						   __u8 *bcast_system)
+{
+	*ana_bcast_type = msg->msg[2];
+	*ana_freq = (msg->msg[3] << 8) | msg->msg[4];
+	*bcast_system = msg->msg[5];
+}
+
+static inline void cec_msg_select_digital_service(struct cec_msg *msg,
+						  const struct cec_op_digital_service_id *digital)
+{
+	msg->len = 9;
+	msg->msg[1] = CEC_MSG_SELECT_DIGITAL_SERVICE;
+	cec_set_digital_service_id(msg->msg + 2, digital);
+}
+
+static inline void cec_ops_select_digital_service(struct cec_msg *msg,
+						  struct cec_op_digital_service_id *digital)
+{
+	cec_get_digital_service_id(msg->msg + 2, digital);
+}
+
+static inline void cec_msg_tuner_step_decrement(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_TUNER_STEP_DECREMENT;
+}
+
+static inline void cec_msg_tuner_step_increment(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_TUNER_STEP_INCREMENT;
+}
+
+
+/* Vendor Specific Commands Feature */
+static inline void cec_msg_device_vendor_id(struct cec_msg *msg, __u32 vendor_id)
+{
+	msg->len = 5;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_DEVICE_VENDOR_ID;
+	msg->msg[2] = vendor_id >> 16;
+	msg->msg[3] = (vendor_id >> 8) & 0xff;
+	msg->msg[4] = vendor_id & 0xff;
+}
+
+static inline void cec_ops_device_vendor_id(const struct cec_msg *msg,
+					    __u32 *vendor_id)
+{
+	*vendor_id = (msg->msg[2] << 16) | (msg->msg[3] << 8) | msg->msg[4];
+}
+
+static inline void cec_msg_give_device_vendor_id(struct cec_msg *msg,
+						 bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GIVE_DEVICE_VENDOR_ID;
+	msg->reply = reply ? CEC_MSG_DEVICE_VENDOR_ID : 0;
+}
+
+static inline void cec_msg_vendor_remote_button_up(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_VENDOR_REMOTE_BUTTON_UP;
+}
+
+
+/* OSD Display Feature */
+static inline void cec_msg_set_osd_string(struct cec_msg *msg,
+					  __u8 disp_ctl,
+					  const char *osd)
+{
+	unsigned len = strlen(osd);
+
+	if (len > 13)
+		len = 13;
+	msg->len = 3 + len;
+	msg->msg[1] = CEC_MSG_SET_OSD_STRING;
+	msg->msg[2] = disp_ctl;
+	memcpy(msg->msg + 3, osd, len);
+}
+
+static inline void cec_ops_set_osd_string(const struct cec_msg *msg,
+					  __u8 *disp_ctl,
+					  char *osd)
+{
+	unsigned len = msg->len - 3;
+
+	*disp_ctl = msg->msg[2];
+	if (len > 13)
+		len = 13;
+	memcpy(osd, msg->msg + 3, len);
+	osd[len] = '\0';
+}
+
+
+/* Device OSD Transfer Feature */
+static inline void cec_msg_set_osd_name(struct cec_msg *msg, const char *name)
+{
+	unsigned len = strlen(name);
+
+	if (len > 14)
+		len = 14;
+	msg->len = 2 + len;
+	msg->msg[1] = CEC_MSG_SET_OSD_NAME;
+	memcpy(msg->msg + 2, name, len);
+}
+
+static inline void cec_ops_set_osd_name(const struct cec_msg *msg,
+					char *name)
+{
+	unsigned len = msg->len - 2;
+
+	if (len > 14)
+		len = 14;
+	memcpy(name, msg->msg + 2, len);
+	name[len] = '\0';
+}
+
+static inline void cec_msg_give_osd_name(struct cec_msg *msg,
+					 bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GIVE_OSD_NAME;
+	msg->reply = reply ? CEC_MSG_SET_OSD_NAME : 0;
+}
+
+
+/* Device Menu Control Feature */
+static inline void cec_msg_menu_status(struct cec_msg *msg,
+				       __u8 menu_state)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_MENU_STATUS;
+	msg->msg[2] = menu_state;
+}
+
+static inline void cec_ops_menu_status(struct cec_msg *msg,
+				       __u8 *menu_state)
+{
+	*menu_state = msg->msg[2];
+}
+
+static inline void cec_msg_menu_request(struct cec_msg *msg,
+					bool reply,
+					__u8 menu_req)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_MENU_REQUEST;
+	msg->msg[2] = menu_req;
+	msg->reply = reply ? CEC_MSG_MENU_STATUS : 0;
+}
+
+static inline void cec_ops_menu_request(struct cec_msg *msg,
+					__u8 *menu_req)
+{
+	*menu_req = msg->msg[2];
+}
+
+static inline void cec_msg_user_control_pressed(struct cec_msg *msg,
+						__u8 ui_cmd)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_USER_CONTROL_PRESSED;
+	msg->msg[2] = ui_cmd;
+}
+
+static inline void cec_ops_user_control_pressed(struct cec_msg *msg,
+						__u8 *ui_cmd)
+{
+	*ui_cmd = msg->msg[2];
+}
+
+static inline void cec_msg_user_control_released(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_USER_CONTROL_RELEASED;
+}
+
+/* Remote Control Passthrough Feature */
+
+/* Power Status Feature */
+static inline void cec_msg_report_power_status(struct cec_msg *msg,
+					       __u8 pwr_state)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_REPORT_POWER_STATUS;
+	msg->msg[2] = pwr_state;
+}
+
+static inline void cec_ops_report_power_status(const struct cec_msg *msg,
+					       __u8 *pwr_state)
+{
+	*pwr_state = msg->msg[2];
+}
+
+static inline void cec_msg_give_device_power_status(struct cec_msg *msg,
+						    bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GIVE_DEVICE_POWER_STATUS;
+	msg->reply = reply ? CEC_MSG_REPORT_POWER_STATUS : 0;
+}
+
+/* General Protocol Messages */
+static inline void cec_msg_feature_abort(struct cec_msg *msg,
+					 __u8 abort_msg, __u8 reason)
+{
+	msg->len = 4;
+	msg->msg[1] = CEC_MSG_FEATURE_ABORT;
+	msg->msg[2] = abort_msg;
+	msg->msg[3] = reason;
+}
+
+static inline void cec_ops_feature_abort(const struct cec_msg *msg,
+					 __u8 *abort_msg, __u8 *reason)
+{
+	*abort_msg = msg->msg[2];
+	*reason = msg->msg[3];
+}
+
+/* This changes the current message into an abort message */
+static inline void cec_msg_reply_abort(struct cec_msg *msg, __u8 reason)
+{
+	cec_msg_set_reply_to(msg, msg);
+	msg->len = 4;
+	msg->msg[2] = msg->msg[1];
+	msg->msg[3] = reason;
+	msg->msg[1] = CEC_MSG_FEATURE_ABORT;
+}
+
+static inline void cec_msg_abort(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_ABORT;
+}
+
+
+/* System Audio Control Feature */
+static inline void cec_msg_report_audio_status(struct cec_msg *msg,
+					       __u8 aud_mute_status,
+					       __u8 aud_vol_status)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_REPORT_AUDIO_STATUS;
+	msg->msg[2] = (aud_mute_status << 7) | (aud_vol_status & 0x7f);
+}
+
+static inline void cec_ops_report_audio_status(const struct cec_msg *msg,
+					       __u8 *aud_mute_status,
+					       __u8 *aud_vol_status)
+{
+	*aud_mute_status = msg->msg[2] >> 7;
+	*aud_vol_status = msg->msg[2] & 0x7f;
+}
+
+static inline void cec_msg_give_audio_status(struct cec_msg *msg,
+					     bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GIVE_AUDIO_STATUS;
+	msg->reply = reply ? CEC_MSG_REPORT_AUDIO_STATUS : 0;
+}
+
+static inline void cec_msg_set_system_audio_mode(struct cec_msg *msg,
+						 __u8 sys_aud_status)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_SET_SYSTEM_AUDIO_MODE;
+	msg->msg[2] = sys_aud_status;
+}
+
+static inline void cec_ops_set_system_audio_mode(const struct cec_msg *msg,
+						 __u8 *sys_aud_status)
+{
+	*sys_aud_status = msg->msg[2];
+}
+
+static inline void cec_msg_system_audio_mode_request(struct cec_msg *msg,
+						     bool reply,
+						     __u16 phys_addr)
+{
+	msg->len = phys_addr == 0xffff ? 2 : 4;
+	msg->msg[1] = CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST;
+	msg->msg[2] = phys_addr >> 8;
+	msg->msg[3] = phys_addr & 0xff;
+	msg->reply = reply ? CEC_MSG_SET_SYSTEM_AUDIO_MODE : 0;
+
+}
+
+static inline void cec_ops_system_audio_mode_request(const struct cec_msg *msg,
+						     __u16 *phys_addr)
+{
+	if (msg->len < 4)
+		*phys_addr = 0xffff;
+	else
+		*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+}
+
+static inline void cec_msg_system_audio_mode_status(struct cec_msg *msg,
+						    __u8 sys_aud_status)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_SYSTEM_AUDIO_MODE_STATUS;
+	msg->msg[2] = sys_aud_status;
+}
+
+static inline void cec_ops_system_audio_mode_status(const struct cec_msg *msg,
+						    __u8 *sys_aud_status)
+{
+	*sys_aud_status = msg->msg[2];
+}
+
+static inline void cec_msg_give_system_audio_mode_status(struct cec_msg *msg,
+							 bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS;
+	msg->reply = reply ? CEC_MSG_SYSTEM_AUDIO_MODE_STATUS : 0;
+}
+
+static inline void cec_msg_report_short_audio_descriptor(struct cec_msg *msg,
+							 __u8 num_descriptors,
+							 const __u32 *descriptors)
+{
+	unsigned i;
+
+	msg->len = 2 + num_descriptors * 3;
+	msg->msg[1] = CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR;
+	for (i = 0; i < num_descriptors; i++) {
+		msg->msg[2 + i * 3] = (descriptors[i] >> 16) & 0xff;
+		msg->msg[3 + i * 3] = (descriptors[i] >> 8) & 0xff;
+		msg->msg[4 + i * 3] = descriptors[i] & 0xff;
+	}
+}
+
+static inline void cec_ops_report_short_audio_descriptor(const struct cec_msg *msg,
+							 __u8 *num_descriptors,
+							 __u32 *descriptors)
+{
+	unsigned i;
+
+	*num_descriptors = (msg->len - 2) / 3;
+	for (i = 0; i < *num_descriptors; i++)
+		descriptors[i] = (msg->msg[2 + i * 3] << 16) |
+			(msg->msg[3 + i * 3] << 8) |
+			msg->msg[4 + i * 3];
+}
+
+static inline void cec_msg_request_short_audio_descriptor(struct cec_msg *msg,
+							  __u8 audio_format_id,
+							  __u8 audio_format_code)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR;
+	msg->msg[2] = (audio_format_id << 6) | (audio_format_code & 0x3f);
+}
+
+static inline void cec_ops_request_short_audio_descriptor(const struct cec_msg *msg,
+							  __u8 *audio_format_id,
+							  __u8 *audio_format_code)
+{
+	*audio_format_id = msg->msg[2] >> 6;
+	*audio_format_code = msg->msg[2] & 0x3f;
+}
+
+
+/* Audio Rate Control Feature */
+static inline void cec_msg_set_audio_rate(struct cec_msg *msg,
+					  __u8 audio_rate)
+{
+	msg->len = 3;
+	msg->msg[1] = CEC_MSG_SET_AUDIO_RATE;
+	msg->msg[2] = audio_rate;
+}
+
+static inline void cec_ops_set_audio_rate(const struct cec_msg *msg,
+					  __u8 *audio_rate)
+{
+	*audio_rate = msg->msg[2];
+}
+
+
+/* Audio Return Channel Control Feature */
+static inline void cec_msg_report_arc_initiated(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_REPORT_ARC_INITIATED;
+}
+
+static inline void cec_msg_initiate_arc(struct cec_msg *msg,
+					bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_INITIATE_ARC;
+	msg->reply = reply ? CEC_MSG_REPORT_ARC_INITIATED : 0;
+}
+
+static inline void cec_msg_request_arc_initiation(struct cec_msg *msg,
+						  bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_REQUEST_ARC_INITIATION;
+	msg->reply = reply ? CEC_MSG_INITIATE_ARC : 0;
+}
+
+static inline void cec_msg_report_arc_terminated(struct cec_msg *msg)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_REPORT_ARC_TERMINATED;
+}
+
+static inline void cec_msg_terminate_arc(struct cec_msg *msg,
+					 bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_TERMINATE_ARC;
+	msg->reply = reply ? CEC_MSG_REPORT_ARC_TERMINATED : 0;
+}
+
+static inline void cec_msg_request_arc_termination(struct cec_msg *msg,
+						   bool reply)
+{
+	msg->len = 2;
+	msg->msg[1] = CEC_MSG_REQUEST_ARC_TERMINATION;
+	msg->reply = reply ? CEC_MSG_TERMINATE_ARC : 0;
+}
+
+
+/* Dynamic Audio Lipsync Feature */
+/* Only for CEC 2.0 and up */
+static inline void cec_msg_report_current_latency(struct cec_msg *msg,
+						  __u16 phys_addr,
+						  __u8 video_latency,
+						  __u8 low_latency_mode,
+						  __u8 audio_out_compensated,
+						  __u8 audio_out_delay)
+{
+	msg->len = 7;
+	msg->msg[1] = CEC_MSG_REPORT_CURRENT_LATENCY;
+	msg->msg[2] = phys_addr >> 8;
+	msg->msg[3] = phys_addr & 0xff;
+	msg->msg[4] = video_latency;
+	msg->msg[5] = (low_latency_mode << 2) | audio_out_compensated;
+	msg->msg[6] = audio_out_delay;
+}
+
+static inline void cec_ops_report_current_latency(const struct cec_msg *msg,
+						  __u16 *phys_addr,
+						  __u8 *video_latency,
+						  __u8 *low_latency_mode,
+						  __u8 *audio_out_compensated,
+						  __u8 *audio_out_delay)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*video_latency = msg->msg[4];
+	*low_latency_mode = (msg->msg[5] >> 2) & 1;
+	*audio_out_compensated = msg->msg[5] & 3;
+	*audio_out_delay = msg->msg[6];
+}
+
+static inline void cec_msg_request_current_latency(struct cec_msg *msg,
+						   bool reply,
+						   __u16 phys_addr)
+{
+	msg->len = 4;
+	msg->msg[1] = CEC_MSG_REQUEST_CURRENT_LATENCY;
+	msg->msg[2] = phys_addr >> 8;
+	msg->msg[3] = phys_addr & 0xff;
+	msg->reply = reply ? CEC_MSG_REPORT_CURRENT_LATENCY : 0;
+}
+
+static inline void cec_ops_request_current_latency(const struct cec_msg *msg,
+						   __u16 *phys_addr)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+}
+
+
+/* Capability Discovery and Control Feature */
+static inline void cec_msg_cdc_hec_inquire_state(struct cec_msg *msg,
+						 __u16 phys_addr1,
+						 __u16 phys_addr2)
+{
+	msg->len = 9;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HEC_INQUIRE_STATE;
+	msg->msg[5] = phys_addr1 >> 8;
+	msg->msg[6] = phys_addr1 & 0xff;
+	msg->msg[7] = phys_addr2 >> 8;
+	msg->msg[8] = phys_addr2 & 0xff;
+}
+
+static inline void cec_ops_cdc_hec_inquire_state(const struct cec_msg *msg,
+						 __u16 *phys_addr,
+						 __u16 *phys_addr1,
+						 __u16 *phys_addr2)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*phys_addr1 = (msg->msg[5] << 8) | msg->msg[6];
+	*phys_addr2 = (msg->msg[7] << 8) | msg->msg[8];
+}
+
+static inline void cec_msg_cdc_hec_report_state(struct cec_msg *msg,
+						__u16 target_phys_addr,
+						__u8 hec_func_state,
+						__u8 host_func_state,
+						__u8 enc_func_state,
+						__u8 cdc_errcode,
+						__u8 has_field,
+						__u16 hec_field)
+{
+	msg->len = has_field ? 10 : 8;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HEC_REPORT_STATE;
+	msg->msg[5] = target_phys_addr >> 8;
+	msg->msg[6] = target_phys_addr & 0xff;
+	msg->msg[7] = (hec_func_state << 6) |
+		      (host_func_state << 4) |
+		      (enc_func_state << 2) |
+		      cdc_errcode;
+	if (has_field) {
+		msg->msg[8] = hec_field >> 8;
+		msg->msg[9] = hec_field & 0xff;
+	}
+}
+
+static inline void cec_ops_cdc_hec_report_state(const struct cec_msg *msg,
+						__u16 *phys_addr,
+						__u16 *target_phys_addr,
+						__u8 *hec_func_state,
+						__u8 *host_func_state,
+						__u8 *enc_func_state,
+						__u8 *cdc_errcode,
+						__u8 *has_field,
+						__u16 *hec_field)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*target_phys_addr = (msg->msg[5] << 8) | msg->msg[6];
+	*hec_func_state = msg->msg[7] >> 6;
+	*host_func_state = (msg->msg[7] >> 4) & 3;
+	*enc_func_state = (msg->msg[7] >> 4) & 3;
+	*cdc_errcode = msg->msg[7] & 3;
+	*has_field = msg->len >= 10;
+	*hec_field = *has_field ? ((msg->msg[8] << 8) | msg->msg[9]) : 0;
+}
+
+static inline void cec_msg_cdc_hec_set_state(struct cec_msg *msg,
+					     __u16 phys_addr1,
+					     __u16 phys_addr2,
+					     __u8 hec_set_state,
+					     __u16 phys_addr3,
+					     __u16 phys_addr4,
+					     __u16 phys_addr5)
+{
+	msg->len = 10;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HEC_INQUIRE_STATE;
+	msg->msg[5] = phys_addr1 >> 8;
+	msg->msg[6] = phys_addr1 & 0xff;
+	msg->msg[7] = phys_addr2 >> 8;
+	msg->msg[8] = phys_addr2 & 0xff;
+	msg->msg[9] = hec_set_state;
+	if (phys_addr3 != CEC_PHYS_ADDR_INVALID) {
+		msg->msg[msg->len++] = phys_addr3 >> 8;
+		msg->msg[msg->len++] = phys_addr3 & 0xff;
+		if (phys_addr4 != CEC_PHYS_ADDR_INVALID) {
+			msg->msg[msg->len++] = phys_addr4 >> 8;
+			msg->msg[msg->len++] = phys_addr4 & 0xff;
+			if (phys_addr5 != CEC_PHYS_ADDR_INVALID) {
+				msg->msg[msg->len++] = phys_addr5 >> 8;
+				msg->msg[msg->len++] = phys_addr5 & 0xff;
+			}
+		}
+	}
+}
+
+static inline void cec_ops_cdc_hec_set_state(const struct cec_msg *msg,
+					     __u16 *phys_addr,
+					     __u16 *phys_addr1,
+					     __u16 *phys_addr2,
+					     __u8 *hec_set_state,
+					     __u16 *phys_addr3,
+					     __u16 *phys_addr4,
+					     __u16 *phys_addr5)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*phys_addr1 = (msg->msg[5] << 8) | msg->msg[6];
+	*phys_addr2 = (msg->msg[7] << 8) | msg->msg[8];
+	*hec_set_state = msg->msg[9];
+	*phys_addr3 = *phys_addr4 = *phys_addr5 = CEC_PHYS_ADDR_INVALID;
+	if (msg->len >= 12)
+		*phys_addr3 = (msg->msg[10] << 8) | msg->msg[11];
+	if (msg->len >= 14)
+		*phys_addr4 = (msg->msg[12] << 8) | msg->msg[13];
+	if (msg->len >= 16)
+		*phys_addr5 = (msg->msg[14] << 8) | msg->msg[15];
+}
+
+static inline void cec_msg_cdc_hec_set_state_adjacent(struct cec_msg *msg,
+						      __u16 phys_addr1,
+						      __u8 hec_set_state)
+{
+	msg->len = 8;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HEC_SET_STATE_ADJACENT;
+	msg->msg[5] = phys_addr1 >> 8;
+	msg->msg[6] = phys_addr1 & 0xff;
+	msg->msg[7] = hec_set_state;
+}
+
+static inline void cec_ops_cdc_hec_set_state_adjacent(const struct cec_msg *msg,
+						      __u16 *phys_addr,
+						      __u16 *phys_addr1,
+						      __u8 *hec_set_state)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*phys_addr1 = (msg->msg[5] << 8) | msg->msg[6];
+	*hec_set_state = msg->msg[7];
+}
+
+static inline void cec_msg_cdc_hec_request_deactivation(struct cec_msg *msg,
+							__u16 phys_addr1,
+							__u16 phys_addr2,
+							__u16 phys_addr3)
+{
+	msg->len = 11;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION;
+	msg->msg[5] = phys_addr1 >> 8;
+	msg->msg[6] = phys_addr1 & 0xff;
+	msg->msg[7] = phys_addr2 >> 8;
+	msg->msg[8] = phys_addr2 & 0xff;
+	msg->msg[9] = phys_addr3 >> 8;
+	msg->msg[10] = phys_addr3 & 0xff;
+}
+
+static inline void cec_ops_cdc_hec_request_deactivation(const struct cec_msg *msg,
+							__u16 *phys_addr,
+							__u16 *phys_addr1,
+							__u16 *phys_addr2,
+							__u16 *phys_addr3)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*phys_addr1 = (msg->msg[5] << 8) | msg->msg[6];
+	*phys_addr2 = (msg->msg[7] << 8) | msg->msg[8];
+	*phys_addr3 = (msg->msg[9] << 8) | msg->msg[10];
+}
+
+static inline void cec_msg_cdc_hec_notify_alive(struct cec_msg *msg)
+{
+	msg->len = 5;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HEC_NOTIFY_ALIVE;
+}
+
+static inline void cec_ops_cdc_hec_notify_alive(const struct cec_msg *msg,
+						__u16 *phys_addr)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+}
+
+static inline void cec_msg_cdc_hec_discover(struct cec_msg *msg)
+{
+	msg->len = 5;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HEC_DISCOVER;
+}
+
+static inline void cec_ops_cdc_hec_discover(const struct cec_msg *msg,
+					    __u16 *phys_addr)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+}
+
+static inline void cec_msg_cdc_hpd_set_state(struct cec_msg *msg,
+					     __u8 input_port,
+					     __u8 hpd_state)
+{
+	msg->len = 6;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HPD_SET_STATE;
+	msg->msg[5] = (input_port << 4) | hpd_state;
+}
+
+static inline void cec_ops_cdc_hpd_set_state(const struct cec_msg *msg,
+					    __u16 *phys_addr,
+					    __u8 *input_port,
+					    __u8 *hpd_state)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*input_port = msg->msg[5] >> 4;
+	*hpd_state = msg->msg[5] & 0xf;
+}
+
+static inline void cec_msg_cdc_hpd_report_state(struct cec_msg *msg,
+						__u8 hpd_state,
+						__u8 hpd_error)
+{
+	msg->len = 6;
+	msg->msg[0] |= 0xf; /* broadcast */
+	msg->msg[1] = CEC_MSG_CDC_MESSAGE;
+	/* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */
+	msg->msg[4] = CEC_MSG_CDC_HPD_REPORT_STATE;
+	msg->msg[5] = (hpd_state << 4) | hpd_error;
+}
+
+static inline void cec_ops_cdc_hpd_report_state(const struct cec_msg *msg,
+						__u16 *phys_addr,
+						__u8 *hpd_state,
+						__u8 *hpd_error)
+{
+	*phys_addr = (msg->msg[2] << 8) | msg->msg[3];
+	*hpd_state = msg->msg[5] >> 4;
+	*hpd_error = msg->msg[5] & 0xf;
+}
+
+#endif
diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h
new file mode 100644
index 0000000..3cc4b98
--- /dev/null
+++ b/include/uapi/linux/cec.h
@@ -0,0 +1,781 @@
+#ifndef _CEC_H
+#define _CEC_H
+
+#include <linux/types.h>
+
+struct cec_msg {
+	__u64 ts;
+	__u32 len;
+	__u32 status;
+	/*
+	 * timeout (in ms) is used to timeout CEC_RECEIVE.
+	 * Set to 0 if you want to wait forever.
+	 */
+	__u32 timeout;
+	/*
+	 * The framework assigns a sequence number to messages that are sent.
+	 * This can be used to track replies to previously sent messages.
+	 */
+	__u32 sequence;
+	__u8 msg[16];
+	/*
+	 * If non-zero, then wait for a reply with this opcode.
+	 * If there was an error when sending the msg or FeatureAbort
+	 * was returned, then reply is set to 0.
+	 * If reply is non-zero upon return, then len/msg are set to
+	 * the received message.
+	 * If reply is zero upon return and status has the
+	 * CEC_TX_STATUS_FEATURE_ABORT bit set, then len/msg are set to the
+	 * received feature abort message.
+	 * If reply is zero upon return and status has the
+	 * CEC_TX_STATUS_REPLY_TIMEOUT
+	 * bit set, then no reply was seen at all.
+	 * This field is ignored with CEC_RECEIVE.
+	 * If reply is non-zero for CEC_TRANSMIT and the message is a broadcast,
+	 * then -EINVAL is returned.
+	 * if reply is non-zero, then timeout is set to 1000 (the required
+	 * maximum response time).
+	 */
+	__u8 reply;
+	__u8 reserved[35];
+};
+
+static inline __u8 cec_msg_initiator(const struct cec_msg *msg)
+{
+	return msg->msg[0] >> 4;
+}
+
+static inline __u8 cec_msg_destination(const struct cec_msg *msg)
+{
+	return msg->msg[0] & 0xf;
+}
+
+static inline bool cec_msg_is_broadcast(const struct cec_msg *msg)
+{
+	return (msg->msg[0] & 0xf) == 0xf;
+}
+
+static inline void cec_msg_init(struct cec_msg *msg,
+				__u8 initiator, __u8 destination)
+{
+	memset(msg, 0, sizeof(*msg));
+	msg->msg[0] = (initiator << 4) | destination;
+	msg->len = 1;
+}
+
+/*
+ * Set the msg destination to the orig initiator and the msg initiator to the
+ * orig destination. Note that msg and orig may be the same pointer, in which
+ * case the change is done in place.
+ */
+static inline void cec_msg_set_reply_to(struct cec_msg *msg, struct cec_msg *orig)
+{
+	/* The destination becomes the initiator and vice versa */
+	msg->msg[0] = (cec_msg_destination(orig) << 4) | cec_msg_initiator(orig);
+}
+
+/* cec status field */
+#define CEC_TX_STATUS_OK		(0)
+#define CEC_TX_STATUS_ARB_LOST		(1 << 0)
+#define CEC_TX_STATUS_RETRY_TIMEOUT	(1 << 1)
+#define CEC_TX_STATUS_FEATURE_ABORT	(1 << 2)
+#define CEC_TX_STATUS_REPLY_TIMEOUT	(1 << 3)
+#define CEC_RX_STATUS_READY		(0)
+
+#define CEC_LOG_ADDR_INVALID		0xff
+#define CEC_PHYS_ADDR_INVALID		0xffff
+
+/* The maximum number of logical addresses one device can be assigned to.
+ * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
+ * Analog Devices CEC hardware supports 3. So let's go wild and go for 4. */
+#define CEC_MAX_LOG_ADDRS 4
+
+/* The logical address types that the CEC device wants to claim */
+#define CEC_LOG_ADDR_TYPE_TV		0
+#define CEC_LOG_ADDR_TYPE_RECORD	1
+#define CEC_LOG_ADDR_TYPE_TUNER		2
+#define CEC_LOG_ADDR_TYPE_PLAYBACK	3
+#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM	4
+#define CEC_LOG_ADDR_TYPE_SPECIFIC	5
+#define CEC_LOG_ADDR_TYPE_UNREGISTERED	6
+/* Switches should use UNREGISTERED.
+ * Processors should use SPECIFIC. */
+
+/*
+ * Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID
+ * should be disabled (CEC_S_VENDOR_ID)
+ */
+#define CEC_VENDOR_ID_NONE		0xffffffff
+
+/* The CEC adapter state */
+#define CEC_ADAP_DISABLED		0
+#define CEC_ADAP_ENABLED		1
+
+/* The passthrough mode state */
+#define CEC_PASSTHROUGH_DISABLED	0
+#define CEC_PASSTHROUGH_ENABLED		1
+
+/* The monitor state */
+#define CEC_MONITOR_DISABLED		0
+#define CEC_MONITOR_ENABLED		1
+
+/* Userspace has to configure the adapter state (enable/disable) */
+#define CEC_CAP_STATE		(1 << 0)
+/* Userspace has to configure the physical address */
+#define CEC_CAP_PHYS_ADDR	(1 << 1)
+/* Userspace has to configure the logical addresses */
+#define CEC_CAP_LOG_ADDRS	(1 << 2)
+/* Userspace can transmit and receive messages */
+#define CEC_CAP_IO		(1 << 3)
+/* Userspace has to configure the vendor id */
+#define CEC_CAP_VENDOR_ID	(1 << 4)
+/*
+ * Passthrough all messages instead of processing them.
+ * Note: ARC and CDC messages are always processed.
+ */
+#define CEC_CAP_PASSTHROUGH	(1 << 5)
+/* Supports remote control */
+#define CEC_CAP_RC		(1 << 6)
+/* Supports ARC */
+#define CEC_CAP_ARC		(1 << 7)
+/* Supports CDC HPD */
+#define CEC_CAP_CDC_HPD		(1 << 8)
+/* Is a source */
+#define CEC_CAP_IS_SOURCE	(1 << 9)
+
+struct cec_caps {
+	__u32 available_log_addrs;
+	__u32 capabilities;
+	__u8 ninputs;
+	__u8  reserved[39];
+};
+
+struct cec_log_addrs {
+	__u8 cec_version;
+	__u8 num_log_addrs;
+	__u8 primary_device_type[CEC_MAX_LOG_ADDRS];
+	__u8 log_addr_type[CEC_MAX_LOG_ADDRS];
+	__u8 log_addr[CEC_MAX_LOG_ADDRS];
+	char osd_name[15];
+
+	/* CEC 2.0 */
+	__u8 all_device_types[CEC_MAX_LOG_ADDRS];
+	__u8 features[CEC_MAX_LOG_ADDRS][12];
+
+	__u8 reserved[63];
+};
+
+/* Events */
+
+/* Event that occurs when the adapter state changes */
+#define CEC_EVENT_STATE_CHANGE	1
+/* Event that occurs when inputs are connected/disconnected */
+#define CEC_EVENT_INPUTS_CHANGE	2
+/* This event is sent when messages are lost because the application
+ * didn't empty the message queue in time */
+#define CEC_EVENT_LOST_MSGS	3
+
+#define CEC_EVENT_STATE_DISABLED	0
+#define CEC_EVENT_STATE_UNCONFIGURED	1
+#define CEC_EVENT_STATE_CONFIGURING	2
+#define CEC_EVENT_STATE_CONFIGURED	3
+
+struct cec_event_state_change {
+	/* current CEC adapter state */
+	__u8 state;
+};
+
+struct cec_event_inputs_change {
+	/* bit 0 == input port 0, bit 15 == input port 15 */
+	/* currently connected input ports */
+	__u16 connected_inputs;
+	/* input ports that changed state since last event */
+	__u16 changed_inputs;
+};
+
+struct cec_event {
+	__u64 ts;
+	__u32 event;
+	__u32 reserved[7];
+	union {
+		struct cec_event_state_change state_change;
+		struct cec_event_inputs_change inputs_change;
+		__u32 raw[16];
+	};
+};
+
+/* ioctls */
+
+/* Adapter capabilities */
+#define CEC_ADAP_G_CAPS		_IOWR('a',  0, struct cec_caps)
+
+/*
+   Configure the CEC adapter. It sets the device type and which
+   logical types it will try to claim. It will return which
+   logical addresses it could actually claim.
+   An error is returned if the adapter is disabled or if there
+   is no physical address assigned.
+ */
+
+#define CEC_ADAP_G_LOG_ADDRS	_IOR ('a',  1, struct cec_log_addrs)
+#define CEC_ADAP_S_LOG_ADDRS	_IOWR('a',  2, struct cec_log_addrs)
+
+/*
+   Enable/disable the adapter. The Set state ioctl may not
+   be available if that is handled internally.
+ */
+#define CEC_ADAP_G_STATE	_IOR ('a',  3, __u32)
+#define CEC_ADAP_S_STATE	_IOW ('a',  4, __u32)
+
+/*
+   phys_addr is either 0 (if this is the CEC root device)
+   or a valid physical address obtained from the sink's EDID
+   as read by this CEC device (if this is a source device)
+   or a physical address obtained and modified from a sink
+   EDID and used for a sink CEC device.
+   If nothing is connected, then phys_addr is 0xffff.
+   See HDMI 1.4b, section 8.7 (Physical Address).
+
+   The Set ioctl may not be available if that is handled
+   internally.
+ */
+#define CEC_ADAP_G_PHYS_ADDR	_IOR ('a',  5, __u16)
+#define CEC_ADAP_S_PHYS_ADDR	_IOW ('a',  6, __u16)
+
+/*
+   Read and set the vendor ID of the CEC adapter.
+ */
+#define CEC_ADAP_G_VENDOR_ID	_IOR ('a',  7, __u32)
+#define CEC_ADAP_S_VENDOR_ID	_IOW ('a',  8, __u32)
+
+/*
+   Read and set the monitor state of the filehandle.
+ */
+#define CEC_G_MONITOR		_IOR ('a',  9, __u32)
+#define CEC_S_MONITOR		_IOW ('a', 10, __u32)
+
+/*
+   Claim message handling and set passthrough mode,
+   release message handling and get passthrough mode for
+   this filehandle.
+ */
+#define CEC_CLAIM		_IOW ('a', 11, __u32)
+#define CEC_RELEASE		_IO  ('a', 12)
+#define CEC_G_PASSTHROUGH	_IOR ('a', 13, __u32)
+
+/* Transmit/receive a CEC command */
+#define CEC_TRANSMIT		_IOWR('a', 14, struct cec_msg)
+#define CEC_RECEIVE		_IOWR('a', 15, struct cec_msg)
+
+/* Dequeue CEC events */
+#define CEC_DQEVENT		_IOWR('a', 16, struct cec_event)
+
+/* Commands */
+
+/* One Touch Play Feature */
+#define CEC_MSG_ACTIVE_SOURCE				0x82
+#define CEC_MSG_IMAGE_VIEW_ON				0x04
+#define CEC_MSG_TEXT_VIEW_ON				0x0d
+
+
+/* Routing Control Feature */
+
+/*
+ * Has also:
+ *	CEC_MSG_ACTIVE_SOURCE
+ */
+
+#define CEC_MSG_INACTIVE_SOURCE				0x9d
+#define CEC_MSG_REQUEST_ACTIVE_SOURCE			0x85
+#define CEC_MSG_ROUTING_CHANGE				0x80
+#define CEC_MSG_ROUTING_INFORMATION			0x81
+#define CEC_MSG_SET_STREAM_PATH				0x86
+
+
+/* Standby Feature */
+#define CEC_MSG_STANDBY					0x36
+
+
+/* One Touch Record Feature */
+#define CEC_MSG_RECORD_OFF				0x0b
+#define CEC_MSG_RECORD_ON				0x09
+/* Record Source Type Operand (rec_src_type) */
+#define CEC_OP_RECORD_SRC_OWN				1
+#define CEC_OP_RECORD_SRC_DIGITAL			2
+#define CEC_OP_RECORD_SRC_ANALOG			3
+#define CEC_OP_RECORD_SRC_EXT_PLUG			4
+#define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR			5
+/* Service Identification Method Operand (service_id_method) */
+#define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID		0
+#define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL		1
+/* Digital Service Broadcast System Operand (dig_bcast_system) */
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN	0x00
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN	0x01
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN		0x02
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS		0x08
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS		0x09
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T		0x0a
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE	0x10
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT	0x11
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T		0x12
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C		0x18
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S		0x19
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2		0x1a
+#define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T		0x1b
+/* Analogue Broadcast Type Operand (ana_bcast_type) */
+#define CEC_OP_ANA_BCAST_TYPE_CABLE			0
+#define CEC_OP_ANA_BCAST_TYPE_SATELLITE			1
+#define CEC_OP_ANA_BCAST_TYPE_TERRESTRIAL		2
+/* Broadcast System Operand (bcast_system) */
+#define CEC_OP_BCAST_SYSTEM_PAL_BG			0x00
+#define CEC_OP_BCAST_SYSTEM_SECAM_LQ			0x01 /* SECAM L' */
+#define CEC_OP_BCAST_SYSTEM_PAL_M			0x02
+#define CEC_OP_BCAST_SYSTEM_NTSC_M			0x03
+#define CEC_OP_BCAST_SYSTEM_PAL_I			0x04
+#define CEC_OP_BCAST_SYSTEM_SECAM_DK			0x05
+#define CEC_OP_BCAST_SYSTEM_SECAM_BG			0x06
+#define CEC_OP_BCAST_SYSTEM_SECAM_L			0x07
+#define CEC_OP_BCAST_SYSTEM_PAL_DK			0x08
+#define CEC_OP_BCAST_SYSTEM_OTHER			0x1f
+/* Channel Number Format Operand (channel_number_fmt) */
+#define CEC_OP_CHANNEL_NUMBER_FMT_1_PART		0x01
+#define CEC_OP_CHANNEL_NUMBER_FMT_2_PART		0x02
+
+#define CEC_MSG_RECORD_STATUS				0x0a
+/* Record Status Operand (rec_status) */
+#define CEC_OP_RECORD_STATUS_CUR_SRC			0x01
+#define CEC_OP_RECORD_STATUS_DIG_SERVICE		0x02
+#define CEC_OP_RECORD_STATUS_ANA_SERVICE		0x03
+#define CEC_OP_RECORD_STATUS_EXT_INPUT			0x04
+#define CEC_OP_RECORD_STATUS_NO_DIG_SERVICE		0x05
+#define CEC_OP_RECORD_STATUS_NO_ANA_SERVICE		0x06
+#define CEC_OP_RECORD_STATUS_NO_SERVICE			0x07
+#define CEC_OP_RECORD_STATUS_INVALID_EXT_PLUG		0x09
+#define CEC_OP_RECORD_STATUS_INVALID_EXT_PHYS_ADDR	0x0a
+#define CEC_OP_RECORD_STATUS_UNSUP_CA			0x0b
+#define CEC_OP_RECORD_STATUS_NO_CA_ENTITLEMENTS		0x0c
+#define CEC_OP_RECORD_STATUS_CANT_COPY_SRC		0x0d
+#define CEC_OP_RECORD_STATUS_NO_MORE_COPIES		0x0e
+#define CEC_OP_RECORD_STATUS_NO_MEDIA			0x10
+#define CEC_OP_RECORD_STATUS_PLAYING			0x11
+#define CEC_OP_RECORD_STATUS_ALREADY_RECORDING		0x12
+#define CEC_OP_RECORD_STATUS_MEDIA_PROT			0x13
+#define CEC_OP_RECORD_STATUS_NO_SIGNAL			0x14
+#define CEC_OP_RECORD_STATUS_MEDIA_PROBLEM		0x15
+#define CEC_OP_RECORD_STATUS_NO_SPACE			0x16
+#define CEC_OP_RECORD_STATUS_PARENTAL_LOCK		0x17
+#define CEC_OP_RECORD_STATUS_TERMINATED_OK		0x1a
+#define CEC_OP_RECORD_STATUS_ALREADY_TERM		0x1b
+#define CEC_OP_RECORD_STATUS_OTHER			0x1f
+
+#define CEC_MSG_RECORD_TV_SCREEN			0x0f
+
+
+/* Timer Programming Feature */
+#define CEC_MSG_CLEAR_ANALOGUE_TIMER			0x33
+/* Recording Sequence Operand (recording_seq) */
+#define CEC_OP_REC_SEQ_SUNDAY				0x01
+#define CEC_OP_REC_SEQ_MONDAY				0x02
+#define CEC_OP_REC_SEQ_TUESDAY				0x04
+#define CEC_OP_REC_SEQ_WEDNESDAY			0x08
+#define CEC_OP_REC_SEQ_THURSDAY				0x10
+#define CEC_OP_REC_SEQ_FRIDAY				0x20
+#define CEC_OP_REC_SEQ_SATERDAY				0x40
+#define CEC_OP_REC_SEQ_ONCE_ONLY			0x00
+
+#define CEC_MSG_CLEAR_DIGITAL_TIMER			0x99
+
+#define CEC_MSG_CLEAR_EXT_TIMER				0xa1
+/* External Source Specifier Operand (ext_src_spec) */
+#define CEC_OP_EXT_SRC_PLUG				0x04
+#define CEC_OP_EXT_SRC_PHYS_ADDR			0x05
+
+#define CEC_MSG_SET_ANALOGUE_TIMER			0x34
+#define CEC_MSG_SET_DIGITAL_TIMER			0x97
+#define CEC_MSG_SET_EXT_TIMER				0xa2
+
+#define CEC_MSG_SET_TIMER_PROGRAM_TITLE			0x67
+#define CEC_MSG_TIMER_CLEARED_STATUS			0x43
+/* Timer Cleared Status Data Operand (timer_cleared_status) */
+#define CEC_OP_TIMER_CLR_STAT_RECORDING			0x00
+#define CEC_OP_TIMER_CLR_STAT_NO_MATCHING		0x01
+#define CEC_OP_TIMER_CLR_STAT_NO_INFO			0x02
+#define CEC_OP_TIMER_CLR_STAT_CLEARED			0x80
+
+#define CEC_MSG_TIMER_STATUS				0x35
+/* Timer Overlap Warning Operand (timer_overlap_warning) */
+#define CEC_OP_TIMER_OVERLAP_WARNING_NO_OVERLAP		0
+#define CEC_OP_TIMER_OVERLAP_WARNING_OVERLAP		1
+/* Media Info Operand (media_info) */
+#define CEC_OP_MEDIA_INFO_UNPROT_MEDIA			0
+#define CEC_OP_MEDIA_INFO_PROT_MEDIA			1
+#define CEC_OP_MEDIA_INFO_NO_MEDIA			2
+/* Programmed Indicator Operand (prog_indicator) */
+#define CEC_OP_PROG_IND_NOT_PROGRAMMED			0
+#define CEC_OP_PROG_IND_PROGRAMMED			1
+/* Programmed Info Operand (prog_info) */
+#define CEC_OP_PROG_INFO_ENOUGH_SPACE			0x08
+#define CEC_OP_PROG_INFO_NOT_ENOUGH_SPACE		0x09
+#define CEC_OP_PROG_INFO_MIGHT_NOT_BE_ENOUGH_SPACE	0x0b
+#define CEC_OP_PROG_INFO_NONE_AVAILABLE			0x0a
+/* Not Programmed Error Info Operand (prog_error) */
+#define CEC_OP_PROG_ERROR_NO_FREE_TIMER			0x01
+#define CEC_OP_PROG_ERROR_DATE_OUT_OF_RANGE		0x02
+#define CEC_OP_PROG_ERROR_REC_SEQ_ERROR			0x03
+#define CEC_OP_PROG_ERROR_INV_EXT_PLUG			0x04
+#define CEC_OP_PROG_ERROR_INV_EXT_PHYS_ADDR		0x05
+#define CEC_OP_PROG_ERROR_CA_UNSUPP			0x06
+#define CEC_OP_PROG_ERROR_INSUF_CA_ENTITLEMENTS		0x07
+#define CEC_OP_PROG_ERROR_RESOLUTION_UNSUPP		0x08
+#define CEC_OP_PROG_ERROR_PARENTAL_LOCK			0x09
+#define CEC_OP_PROG_ERROR_CLOCK_FAILURE			0x0a
+#define CEC_OP_PROG_ERROR_DUPLICATE			0x0e
+
+
+/* System Information Feature */
+#define CEC_MSG_CEC_VERSION				0x9e
+/* CEC Version Operand (cec_version) */
+#define CEC_OP_CEC_VERSION_1_3A				4
+#define CEC_OP_CEC_VERSION_1_4				5
+#define CEC_OP_CEC_VERSION_2_0				6
+
+#define CEC_MSG_GET_CEC_VERSION				0x9f
+#define CEC_MSG_GIVE_PHYSICAL_ADDR			0x83
+#define CEC_MSG_GET_MENU_LANGUAGE			0x91
+#define CEC_MSG_REPORT_PHYSICAL_ADDR			0x84
+/* Primary Device Type Operand (prim_devtype) */
+#define CEC_OP_PRIM_DEVTYPE_TV				0
+#define CEC_OP_PRIM_DEVTYPE_RECORD			1
+#define CEC_OP_PRIM_DEVTYPE_TUNER			3
+#define CEC_OP_PRIM_DEVTYPE_PLAYBACK			4
+#define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM			5
+#define CEC_OP_PRIM_DEVTYPE_SWITCH			6
+#define CEC_OP_PRIM_DEVTYPE_PROCESSOR			7
+
+#define CEC_MSG_SET_MENU_LANGUAGE			0x32
+#define CEC_MSG_REPORT_FEATURES				0xa6	/* HDMI 2.0 */
+/* All Device Types Operand (all_device_types) */
+#define CEC_OP_ALL_DEVTYPE_TV				0x80
+#define CEC_OP_ALL_DEVTYPE_RECORD			0x40
+#define CEC_OP_ALL_DEVTYPE_TUNER			0x20
+#define CEC_OP_ALL_DEVTYPE_PLAYBACK			0x10
+#define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM			0x08
+#define CEC_OP_ALL_DEVTYPE_SWITCH			0x04
+/* And if you wondering what happened to PROCESSOR devices: those should
+ * be mapped to a SWITCH. */
+
+/* Valid for RC Profile and Device Feature operands */
+#define CEC_OP_FEAT_EXT					0x80	/* Extension bit */
+/* RC Profile Operand (rc_profile) */
+#define CEC_OP_FEAT_RC_TV_PROFILE_NONE			0x00
+#define CEC_OP_FEAT_RC_TV_PROFILE_1			0x02
+#define CEC_OP_FEAT_RC_TV_PROFILE_2			0x06
+#define CEC_OP_FEAT_RC_TV_PROFILE_3			0x0a
+#define CEC_OP_FEAT_RC_TV_PROFILE_4			0x0e
+#define CEC_OP_FEAT_RC_SRC_HAS_DEV_ROOT_MENU		0x50
+#define CEC_OP_FEAT_RC_SRC_HAS_DEV_SETUP_MENU		0x48
+#define CEC_OP_FEAT_RC_SRC_HAS_CONTENTS_MENU		0x44
+#define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_TOP_MENU		0x42
+#define CEC_OP_FEAT_RC_SRC_HAS_MEDIA_CONTEXT_MENU	0x41
+/* Device Feature Operand (dev_features) */
+#define CEC_OP_FEAT_DEV_HAS_RECORD_TV_SCREEN		0x40
+#define CEC_OP_FEAT_DEV_HAS_SET_OSD_STRING		0x20
+#define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL		0x10
+#define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE		0x08
+#define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX			0x04
+#define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX		0x02
+
+#define CEC_MSG_GIVE_FEATURES				0xa5	/* HDMI 2.0 */
+
+
+/* Deck Control Feature */
+#define CEC_MSG_DECK_CONTROL				0x42
+/* Deck Control Mode Operand (deck_control_mode) */
+#define CEC_OP_DECK_CTL_MODE_SKIP_FWD			1
+#define CEC_OP_DECK_CTL_MODE_SKIP_REV			2
+#define CEC_OP_DECK_CTL_MODE_STOP			3
+#define CEC_OP_DECK_CTL_MODE_EJECT			4
+
+#define CEC_MSG_DECK_STATUS				0x1b
+/* Deck Info Operand (deck_info) */
+#define CEC_OP_DECK_INFO_PLAY				0x11
+#define CEC_OP_DECK_INFO_RECORD				0x12
+#define CEC_OP_DECK_INFO_PLAY_REV			0x13
+#define CEC_OP_DECK_INFO_STILL				0x14
+#define CEC_OP_DECK_INFO_SLOW				0x15
+#define CEC_OP_DECK_INFO_SLOW_REV			0x16
+#define CEC_OP_DECK_INFO_FAST_FWD			0x17
+#define CEC_OP_DECK_INFO_FAST_REV			0x18
+#define CEC_OP_DECK_INFO_NO_MEDIA			0x19
+#define CEC_OP_DECK_INFO_STOP				0x1a
+#define CEC_OP_DECK_INFO_SKIP_FWD			0x1b
+#define CEC_OP_DECK_INFO_SKIP_REV			0x1c
+#define CEC_OP_DECK_INFO_INDEX_SEARCH_FWD		0x1d
+#define CEC_OP_DECK_INFO_INDEX_SEARCH_REV		0x1e
+#define CEC_OP_DECK_INFO_OTHER				0x1f
+
+#define CEC_MSG_GIVE_DECK_STATUS			0x1a
+/* Status Request Operand (status_req) */
+#define CEC_OP_STATUS_REQ_ON				1
+#define CEC_OP_STATUS_REQ_OFF				2
+#define CEC_OP_STATUS_REQ_ONCE				3
+
+#define CEC_MSG_PLAY					0x41
+/* Play Mode Operand (play_mode) */
+#define CEC_OP_PLAY_MODE_PLAY_FWD			0x24
+#define CEC_OP_PLAY_MODE_PLAY_REV			0x20
+#define CEC_OP_PLAY_MODE_PLAY_STILL			0x25
+#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MIN		0x05
+#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MED		0x06
+#define CEC_OP_PLAY_MODE_PLAY_FAST_FWD_MAX		0x07
+#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MIN		0x09
+#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MED		0x0a
+#define CEC_OP_PLAY_MODE_PLAY_FAST_REV_MAX		0x0b
+#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MIN		0x15
+#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MED		0x16
+#define CEC_OP_PLAY_MODE_PLAY_SLOW_FWD_MAX		0x17
+#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MIN		0x19
+#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MED		0x1a
+#define CEC_OP_PLAY_MODE_PLAY_SLOW_REV_MAX		0x1b
+
+
+/* Tuner Control Feature */
+#define CEC_MSG_GIVE_TUNER_DEVICE_STATUS		0x08
+#define CEC_MSG_SELECT_ANALOGUE_SERVICE			0x92
+#define CEC_MSG_SELECT_DIGITAL_SERVICE			0x93
+#define CEC_MSG_TUNER_DEVICE_STATUS			0x07
+/* Recording Flag Operand (rec_flag) */
+#define CEC_OP_REC_FLAG_USED				0
+#define CEC_OP_REC_FLAG_NOT_USED			1
+/* Tuner Display Info Operand (tuner_display_info) */
+#define CEC_OP_TUNER_DISPLAY_INFO_DIGITAL		0
+#define CEC_OP_TUNER_DISPLAY_INFO_NONE			1
+#define CEC_OP_TUNER_DISPLAY_INFO_ANALOGUE		2
+
+#define CEC_MSG_TUNER_STEP_DECREMENT			0x06
+#define CEC_MSG_TUNER_STEP_INCREMENT			0x05
+
+
+/* Vendor Specific Commands Feature */
+
+/*
+ * Has also:
+ *	CEC_MSG_CEC_VERSION
+ *	CEC_MSG_GET_CEC_VERSION
+ */
+#define CEC_MSG_DEVICE_VENDOR_ID			0x87
+#define CEC_MSG_GIVE_DEVICE_VENDOR_ID			0x8c
+#define CEC_MSG_VENDOR_COMMAND				0x89
+#define CEC_MSG_VENDOR_COMMAND_WITH_ID			0xa0
+#define CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN		0x8a
+#define CEC_MSG_VENDOR_REMOTE_BUTTON_UP			0x8b
+
+
+/* OSD Display Feature */
+#define CEC_MSG_SET_OSD_STRING				0x64
+/* Display Control Operand (disp_ctl) */
+#define CEC_OP_DISP_CTL_DEFAULT				0x00
+#define CEC_OP_DISP_CTL_UNTIL_CLEARED			0x40
+#define CEC_OP_DISP_CTL_CLEAR				0x80
+
+
+/* Device OSD Transfer Feature */
+#define CEC_MSG_GIVE_OSD_NAME				0x46
+#define CEC_MSG_SET_OSD_NAME				0x47
+
+
+/* Device Menu Control Feature */
+#define CEC_MSG_MENU_REQUEST				0x8d
+/* Menu Request Type Operand (menu_req) */
+#define CEC_OP_MENU_REQUEST_ACTIVATE			0x00
+#define CEC_OP_MENU_REQUEST_DEACTIVATE			0x01
+#define CEC_OP_MENU_REQUEST_QUERY			0x02
+
+#define CEC_MSG_MENU_STATUS				0x8e
+/* Menu State Operand (menu_state) */
+#define CEC_OP_MENU_STATE_ACTIVATED			0x00
+#define CEC_OP_MENU_STATE_DEACTIVATED			0x01
+
+#define CEC_MSG_USER_CONTROL_PRESSED			0x44
+/* UI Broadcast Type Operand (ui_bcast_type) */
+#define CEC_OP_UI_BCAST_TYPE_TOGGLE_ALL			0x00
+#define CEC_OP_UI_BCAST_TYPE_TOGGLE_DIG_ANA		0x01
+#define CEC_OP_UI_BCAST_TYPE_ANALOGUE			0x10
+#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_T			0x20
+#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_CABLE		0x30
+#define CEC_OP_UI_BCAST_TYPE_ANALOGUE_SAT		0x40
+#define CEC_OP_UI_BCAST_TYPE_DIGITAL			0x50
+#define CEC_OP_UI_BCAST_TYPE_DIGITAL_T			0x60
+#define CEC_OP_UI_BCAST_TYPE_DIGITAL_CABLE		0x70
+#define CEC_OP_UI_BCAST_TYPE_DIGITAL_SAT		0x80
+#define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT		0x90
+#define CEC_OP_UI_BCAST_TYPE_DIGITAL_COM_SAT2		0x91
+#define CEC_OP_UI_BCAST_TYPE_IP				0xa0
+/* UI Sound Presentation Control Operand (ui_snd_pres_ctl) */
+#define CEC_OP_UI_SND_PRES_CTL_DUAL_MONO		0x10
+#define CEC_OP_UI_SND_PRES_CTL_KARAOKE			0x20
+#define CEC_OP_UI_SND_PRES_CTL_DOWNMIX			0x80
+#define CEC_OP_UI_SND_PRES_CTL_REVERB			0x90
+#define CEC_OP_UI_SND_PRES_CTL_EQUALIZER		0xa0
+#define CEC_OP_UI_SND_PRES_CTL_BASS_UP			0xb1
+#define CEC_OP_UI_SND_PRES_CTL_BASS_NEUTRAL		0xb2
+#define CEC_OP_UI_SND_PRES_CTL_BASS_DOWN		0xb3
+#define CEC_OP_UI_SND_PRES_CTL_TREBLE_UP		0xc1
+#define CEC_OP_UI_SND_PRES_CTL_TREBLE_NEUTRAL		0xc2
+#define CEC_OP_UI_SND_PRES_CTL_TREBLE_DOWN		0xc3
+
+#define CEC_MSG_USER_CONTROL_RELEASED			0x45
+
+
+/* Remote Control Passthrough Feature */
+
+/*
+ * Has also:
+ *	CEC_MSG_USER_CONTROL_PRESSED
+ *	CEC_MSG_USER_CONTROL_RELEASED
+ */
+
+
+/* Power Status Feature */
+#define CEC_MSG_GIVE_DEVICE_POWER_STATUS		0x8f
+#define CEC_MSG_REPORT_POWER_STATUS			0x90
+/* Power Status Operand (pwr_state) */
+#define CEC_OP_POWER_STATUS_ON				0
+#define CEC_OP_POWER_STATUS_STANDBY			1
+#define CEC_OP_POWER_STATUS_TO_ON			2
+#define CEC_OP_POWER_STATUS_TO_STANDBY			3
+
+
+/* General Protocol Messages */
+#define CEC_MSG_FEATURE_ABORT				0x00
+/* Abort Reason Operand (reason) */
+#define CEC_OP_ABORT_UNRECOGNIZED_OP			0
+#define CEC_OP_ABORT_INCORRECT_MODE			1
+#define CEC_OP_ABORT_NO_SOURCE				2
+#define CEC_OP_ABORT_INVALID_OP				3
+#define CEC_OP_ABORT_REFUSED				4
+#define CEC_OP_ABORT_UNDETERMINED			5
+
+#define CEC_MSG_ABORT					0xff
+
+
+/* System Audio Control Feature */
+
+/*
+ * Has also:
+ *	CEC_MSG_USER_CONTROL_PRESSED
+ *	CEC_MSG_USER_CONTROL_RELEASED
+ */
+#define CEC_MSG_GIVE_AUDIO_STATUS			0x71
+#define CEC_MSG_GIVE_SYSTEM_AUDIO_MODE_STATUS		0x7d
+#define CEC_MSG_REPORT_AUDIO_STATUS			0x7a
+/* Audio Mute Status Operand (aud_mute_status) */
+#define CEC_OP_AUD_MUTE_STATUS_OFF			0
+#define CEC_OP_AUD_MUTE_STATUS_ON			1
+
+#define CEC_MSG_REPORT_SHORT_AUDIO_DESCRIPTOR		0xa3
+#define CEC_MSG_REQUEST_SHORT_AUDIO_DESCRIPTOR		0xa4
+#define CEC_MSG_SET_SYSTEM_AUDIO_MODE			0x72
+/* System Audio Status Operand (sys_aud_status) */
+#define CEC_OP_SYS_AUD_STATUS_OFF			0
+#define CEC_OP_SYS_AUD_STATUS_ON			1
+
+#define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST		0x70
+#define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS		0x7e
+/* Audio Format ID Operand (audio_format_id) */
+#define CEC_OP_AUD_FMT_ID_CEA861			0
+#define CEC_OP_AUD_FMT_ID_CEA861_CXT			1
+
+
+/* Audio Rate Control Feature */
+#define CEC_MSG_SET_AUDIO_RATE				0x9a
+/* Audio Rate Operand (audio_rate) */
+#define CEC_OP_AUD_RATE_OFF				0
+#define CEC_OP_AUD_RATE_WIDE_STD			1
+#define CEC_OP_AUD_RATE_WIDE_FAST			2
+#define CEC_OP_AUD_RATE_WIDE_SLOW			3
+#define CEC_OP_AUD_RATE_NARROW_STD			4
+#define CEC_OP_AUD_RATE_NARROW_FAST			5
+#define CEC_OP_AUD_RATE_NARROW_SLOW			6
+
+
+/* Audio Return Channel Control Feature */
+#define CEC_MSG_INITIATE_ARC				0xc0
+#define CEC_MSG_REPORT_ARC_INITIATED			0xc1
+#define CEC_MSG_REPORT_ARC_TERMINATED			0xc2
+#define CEC_MSG_REQUEST_ARC_INITIATION			0xc3
+#define CEC_MSG_REQUEST_ARC_TERMINATION			0xc4
+#define CEC_MSG_TERMINATE_ARC				0xc5
+
+
+/* Dynamic Audio Lipsync Feature */
+/* Only for CEC 2.0 and up */
+#define CEC_MSG_REQUEST_CURRENT_LATENCY			0xa7
+#define CEC_MSG_REPORT_CURRENT_LATENCY			0xa8
+/* Low Latency Mode Operand (low_latency_mode) */
+#define CEC_OP_LOW_LATENCY_MODE_OFF			0
+#define CEC_OP_LOW_LATENCY_MODE_ON			1
+/* Audio Output Compensated Operand (audio_out_compensated) */
+#define CEC_OP_AUD_OUT_COMPENSATED_NA			0
+#define CEC_OP_AUD_OUT_COMPENSATED_DELAY		1
+#define CEC_OP_AUD_OUT_COMPENSATED_NO_DELAY		2
+#define CEC_OP_AUD_OUT_COMPENSATED_PARTIAL_DELAY	3
+
+
+/* Capability Discovery and Control Feature */
+#define CEC_MSG_CDC_MESSAGE				0xf8
+/* Ethernet-over-HDMI: nobody ever does this... */
+#define CEC_MSG_CDC_HEC_INQUIRE_STATE			0x00
+#define CEC_MSG_CDC_HEC_REPORT_STATE			0x01
+/* HEC Functionality State Operand (hec_func_state) */
+#define CEC_OP_HEC_FUNC_STATE_NOT_SUPPORTED		0
+#define CEC_OP_HEC_FUNC_STATE_INACTIVE			1
+#define CEC_OP_HEC_FUNC_STATE_ACTIVE			2
+#define CEC_OP_HEC_FUNC_STATE_ACTIVATION_FIELD		3
+/* Host Functionality State Operand (host_func_state) */
+#define CEC_OP_HOST_FUNC_STATE_NOT_SUPPORTED		0
+#define CEC_OP_HOST_FUNC_STATE_INACTIVE			1
+#define CEC_OP_HOST_FUNC_STATE_ACTIVE			2
+/* ENC Functionality State Operand (enc_func_state) */
+#define CEC_OP_ENC_FUNC_STATE_EXT_CON_NOT_SUPPORTED	0
+#define CEC_OP_ENC_FUNC_STATE_EXT_CON_INACTIVE		1
+#define CEC_OP_ENC_FUNC_STATE_EXT_CON_ACTIVE		2
+/* CDC Error Code Operand (cdc_errcode) */
+#define CEC_OP_CDC_ERROR_CODE_NONE			0
+#define CEC_OP_CDC_ERROR_CODE_CAP_UNSUPPORTED		1
+#define CEC_OP_CDC_ERROR_CODE_WRONG_STATE		2
+#define CEC_OP_CDC_ERROR_CODE_OTHER			3
+/* HEC Support Operand (hec_support) */
+#define CEC_OP_HEC_SUPPORT_NO				0
+#define CEC_OP_HEC_SUPPORT_YES				1
+/* HEC Activation Operand (hec_activation) */
+#define CEC_OP_HEC_ACTIVATION_ON			0
+#define CEC_OP_HEC_ACTIVATION_OFF			1
+
+#define CEC_MSG_CDC_HEC_SET_STATE_ADJACENT		0x02
+#define CEC_MSG_CDC_HEC_SET_STATE			0x03
+/* HEC Set State Operand (hec_set_state) */
+#define CEC_OP_HEC_SET_STATE_DEACTIVATE			0
+#define CEC_OP_HEC_SET_STATE_ACTIVATE			1
+
+#define CEC_MSG_CDC_HEC_REQUEST_DEACTIVATION		0x04
+#define CEC_MSG_CDC_HEC_NOTIFY_ALIVE			0x05
+#define CEC_MSG_CDC_HEC_DISCOVER			0x06
+/* Hotplug Detect messages */
+#define CEC_MSG_CDC_HPD_SET_STATE			0x10
+/* HPD State Operand (hpd_state) */
+#define CEC_OP_HPD_STATE_CP_EDID_DISABLE		0
+#define CEC_OP_HPD_STATE_CP_EDID_ENABLE			1
+#define CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE		2
+#define CEC_OP_HPD_STATE_EDID_DISABLE			3
+#define CEC_OP_HPD_STATE_EDID_ENABLE			4
+#define CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE		5
+#define CEC_MSG_CDC_HPD_REPORT_STATE			0x11
+/* HPD Error Code Operand (hpd_error) */
+#define CEC_OP_HPD_ERROR_NONE				0
+#define CEC_OP_HPD_ERROR_INITIATOR_NOT_CAPABLE		1
+#define CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE		2
+#define CEC_OP_HPD_ERROR_OTHER				3
+#define CEC_OP_HPD_ERROR_NONE_NO_VIDEO			4
+
+#endif
-- 
2.1.4

[PATCHv8 08/15] cec.txt: add CEC framework documentation

[Hans Verkuil]

From: Hans Verkuil <hansverk@cisco.com>

Document the new HDMI CEC framework.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: add DocBook documentation by Hans Verkuil, with
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 Documentation/cec.txt | 166 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 166 insertions(+)
 create mode 100644 Documentation/cec.txt

diff --git a/Documentation/cec.txt b/Documentation/cec.txt
new file mode 100644
index 0000000..b298249
--- /dev/null
+++ b/Documentation/cec.txt
@@ -0,0 +1,166 @@
+CEC Kernel Support
+==================
+
+The CEC framework provides a unified kernel interface for use with HDMI CEC
+hardware. It is designed to handle a multiple variants of hardware. Adding to
+the flexibility of the framework it enables to set which parts of the CEC
+protocol processing is handled by the hardware, by the driver and by the
+userspace application.
+
+
+The CEC Protocol
+----------------
+
+The CEC protocol enables consumer electronic devices to communicate with each
+other through the HDMI connection. The protocol uses logical addresses in the
+communication. The logical address is strictly connected with the functionality
+provided by the device. The TV acting as the communication hub is always
+assigned address 0. The physical address is determined by the physical
+connection between devices.
+
+The protocol enables control of compatible devices with a single remote.
+Synchronous power on/standby, instant playback with changing the content source
+on the TV.
+
+The Kernel Interface
+====================
+
+CEC Adapter
+-----------
+
+#define CEC_LOG_ADDR_INVALID 0xff
+
+/* The maximum number of logical addresses one device can be assigned to.
+ * The CEC 2.0 spec allows for only 2 logical addresses at the moment. The
+ * Analog Devices CEC hardware supports 3. So let's go wild and go for 4. */
+#define CEC_MAX_LOG_ADDRS 4
+
+/* The "Primary Device Type" */
+#define CEC_OP_PRIM_DEVTYPE_TV		0
+#define CEC_OP_PRIM_DEVTYPE_RECORD		1
+#define CEC_OP_PRIM_DEVTYPE_TUNER		3
+#define CEC_OP_PRIM_DEVTYPE_PLAYBACK		4
+#define CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM	5
+#define CEC_OP_PRIM_DEVTYPE_SWITCH		6
+#define CEC_OP_PRIM_DEVTYPE_VIDEOPROC	7
+
+/* The "All Device Types" flags (CEC 2.0) */
+#define CEC_OP_ALL_DEVTYPE_TV		(1 << 7)
+#define CEC_OP_ALL_DEVTYPE_RECORD	(1 << 6)
+#define CEC_OP_ALL_DEVTYPE_TUNER	(1 << 5)
+#define CEC_OP_ALL_DEVTYPE_PLAYBACK	(1 << 4)
+#define CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM	(1 << 3)
+#define CEC_OP_ALL_DEVTYPE_SWITCH	(1 << 2)
+/* And if you wondering what happened to VIDEOPROC devices: those should
+ * be mapped to a SWITCH. */
+
+/* The logical address types that the CEC device wants to claim */
+#define CEC_LOG_ADDR_TYPE_TV		0
+#define CEC_LOG_ADDR_TYPE_RECORD	1
+#define CEC_LOG_ADDR_TYPE_TUNER		2
+#define CEC_LOG_ADDR_TYPE_PLAYBACK	3
+#define CEC_LOG_ADDR_TYPE_AUDIOSYSTEM	4
+#define CEC_LOG_ADDR_TYPE_SPECIFIC	5
+#define CEC_LOG_ADDR_TYPE_UNREGISTERED	6
+/* Switches should use UNREGISTERED.
+ * Video processors should use SPECIFIC. */
+
+/* The CEC version */
+#define CEC_OP_CEC_VERSION_1_3A		4
+#define CEC_OP_CEC_VERSION_1_4		5
+#define CEC_OP_CEC_VERSION_2_0		6
+
+struct cec_adapter {
+	/* internal fields removed */
+
+	u16 phys_addr;
+	u32 capabilities;
+	u8 version;
+	u8 num_log_addrs;
+	u8 prim_device[CEC_MAX_LOG_ADDRS];
+	u8 log_addr_type[CEC_MAX_LOG_ADDRS];
+	u8 log_addr[CEC_MAX_LOG_ADDRS];
+
+	int (*adap_enable)(struct cec_adapter *adap, bool enable);
+	int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr);
+	int (*adap_transmit)(struct cec_adapter *adap, struct cec_msg *msg);
+	void (*adap_transmit_timed_out)(struct cec_adapter *adap);
+
+	void (*claimed_log_addr)(struct cec_adapter *adap, u8 idx);
+	int (*received)(struct cec_adapter *adap, struct cec_msg *msg);
+};
+
+int cec_create_adapter(struct cec_adapter *adap, u32 caps);
+void cec_delete_adapter(struct cec_adapter *adap);
+int cec_transmit_msg(struct cec_adapter *adap, struct cec_data *data, bool block);
+
+/* Called by the adapter */
+void cec_transmit_done(struct cec_adapter *adap, u32 status);
+void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg);
+
+int cec_receive_msg(struct cec_adapter *adap, struct cec_msg *msg, bool block);
+int cec_claim_log_addrs(struct cec_adapter *adap, struct cec_log_addrs *log_addrs, bool block);
+
+The device type defines are defined by the CEC standard.
+
+The cec_adapter structure represents the adapter. It has a number of
+operations that have to be implemented in the driver: adap_enable() enables
+or disables the physical adapter, adap_log_addr() tells the driver which
+logical address should be configured. This may be called multiple times
+to configure multiple logical addresses. Calling adap_enable(false) or
+adap_log_addr(CEC_LOG_ADDR_INVALID) will clear all configured logical
+addresses.
+
+The adap_transmit op will setup the hardware to send out the given CEC message.
+This will return without waiting for the transmission to finish. The
+adap_transmit_timed_out() function is called when the current transmission timed
+out and the hardware needs to be informed of this (the hardware should go back
+from transmitter to receiver mode).
+
+The adapter driver will also call into the adapter: it should call
+cec_transmit_done() when a cec transfer was finalized and cec_received_msg()
+when a new message was received.
+
+When a message is received the received() op is called.
+
+The driver has to call cec_create_adapter to initialize the structure. If
+the 'caps' argument is non-zero, then it will also create a /dev/cecX
+device node to allow userspace to interact with the CEC device. Userspace
+can request those capabilities with the CEC_G_CAPS ioctl.
+
+In order for a CEC adapter to be configured it needs a physical address.
+This is normally assigned by the driver. It is either 0.0.0.0 for a TV (aka
+video receiver) or it is derived from the EDID that the source received
+from the sink. This is normally set by the driver before enabling the CEC
+adapter, or it is set from userspace in the case of CEC USB dongles (although
+embedded systems might also want to set this manually).
+
+After enabling the CEC adapter it has to be configured.
+
+The userspace has to inform the CEC adapter of which type of device it requests
+the adapter to identify itself. After this information is set by userspace, the
+CEC framework will attempt to to find and claim a logical addresses matching the
+requested device type. If none are found, then it will fall back to logical
+address Unregistered (15). To clear the logical addresses list from the list the
+userspace application should set the num_log_addrs field of struct cec_log_addr
+to 0.
+
+The type of device is set from the userspace with the CEC_S_ADAP_LOG_ADDRS. In
+addition, claiming logical addresses can be initiated from the kernel side by
+calling the cec_claim_log_addrs function.
+
+Before the addresses are claimed it is possible to send and receive messages.
+Sending all messages is possible as it is up to the userspace to the source
+and destination addresses in the message payload. However, only broadcast
+messages can be received until a regular logical address is claimed.
+
+When a CEC message is received the CEC framework will take care of the CEC
+core messages CEC_MSG_GET_CEC_VERSION, CEC_MSG_GIVE_PHYS_ADDR and CEC_MSG_ABORT.
+Then it will call the received() op (if set), and finally it will queue it
+for handling by userspace if create_devnode was true, or send back
+FEATURE_ABORT if create_devnode was false.
+
+Drivers can also use the cec_transmit_msg() call to transmit a message. This
+can either be fire-and-forget (the CEC framework will queue up messages in a
+transmit queue), or a blocking wait until there is either an error or a
+reply to the message.
-- 
2.1.4

[PATCHv8 09/15] DocBook/media: add CEC documentation

[Hans Verkuil]

From: Hans Verkuil <hverkuil@xs4all.nl>

Add DocBook documentation for the CEC API.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: add documentation for passthrough mode]
[k.debski@samsung.com: minor fixes and change of reserved field sizes]
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 Documentation/DocBook/media/Makefile               |   2 +
 Documentation/DocBook/media/v4l/biblio.xml         |  10 +
 Documentation/DocBook/media/v4l/cec-api.xml        |  75 +++++
 Documentation/DocBook/media/v4l/cec-func-close.xml |  59 ++++
 Documentation/DocBook/media/v4l/cec-func-ioctl.xml |  73 +++++
 Documentation/DocBook/media/v4l/cec-func-open.xml  |  94 +++++++
 Documentation/DocBook/media/v4l/cec-func-poll.xml  |  89 ++++++
 .../DocBook/media/v4l/cec-ioc-adap-g-caps.xml      | 138 ++++++++++
 .../DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml | 306 +++++++++++++++++++++
 .../DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml |  78 ++++++
 .../DocBook/media/v4l/cec-ioc-adap-g-state.xml     |  87 ++++++
 .../DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml |  70 +++++
 .../DocBook/media/v4l/cec-ioc-dqevent.xml          | 125 +++++++++
 .../DocBook/media/v4l/cec-ioc-g-monitor.xml        |  86 ++++++
 .../DocBook/media/v4l/cec-ioc-g-passthrough.xml    |  81 ++++++
 .../DocBook/media/v4l/cec-ioc-receive.xml          | 185 +++++++++++++
 Documentation/DocBook/media_api.tmpl               |   8 +-
 17 files changed, 1564 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/DocBook/media/v4l/cec-api.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-func-close.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-func-ioctl.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-func-open.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-func-poll.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml
 create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-receive.xml

diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile
index 23996f8..5c89f4b 100644
--- a/Documentation/DocBook/media/Makefile
+++ b/Documentation/DocBook/media/Makefile
@@ -64,6 +64,7 @@ IOCTLS = \
 	$(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/net.h) \
 	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/video.h) \
 	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/cec.h) \
 	$(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
 
 DEFINES = \
@@ -100,6 +101,7 @@ STRUCTS = \
 	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/ && !/_old/)' $(srctree)/include/uapi/linux/dvb/net.h) \
 	$(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/video.h) \
 	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \
+	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/cec.h) \
 	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \
 	$(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h)
 
diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml
index fdee6b3..bed940b 100644
--- a/Documentation/DocBook/media/v4l/biblio.xml
+++ b/Documentation/DocBook/media/v4l/biblio.xml
@@ -324,6 +324,16 @@ in the frequency range from 87,5 to 108,0 MHz</title>
       <subtitle>Specification Version 1.4a</subtitle>
     </biblioentry>
 
+    <biblioentry id="hdmi2">
+      <abbrev>HDMI2</abbrev>
+      <authorgroup>
+	<corpauthor>HDMI Licensing LLC
+(<ulink url="http://www.hdmi.org">http://www.hdmi.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>High-Definition Multimedia Interface</title>
+      <subtitle>Specification Version 2.0</subtitle>
+    </biblioentry>
+
     <biblioentry id="dp">
       <abbrev>DP</abbrev>
       <authorgroup>
diff --git a/Documentation/DocBook/media/v4l/cec-api.xml b/Documentation/DocBook/media/v4l/cec-api.xml
new file mode 100644
index 0000000..7394116
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-api.xml
@@ -0,0 +1,75 @@
+<partinfo>
+  <authorgroup>
+    <author>
+      <firstname>Hans</firstname>
+      <surname>Verkuil</surname>
+      <affiliation><address><email>hans.verkuil@cisco.com</email></address></affiliation>
+      <contrib>Initial version.</contrib>
+    </author>
+  </authorgroup>
+  <copyright>
+    <year>2015</year>
+    <holder>Hans Verkuil</holder>
+  </copyright>
+
+  <revhistory>
+    <!-- Put document revisions here, newest first. -->
+    <revision>
+      <revnumber>1.0.0</revnumber>
+      <date>2015-04-27</date>
+      <authorinitials>hv</authorinitials>
+      <revremark>Initial revision</revremark>
+    </revision>
+  </revhistory>
+</partinfo>
+
+<title>CEC API</title>
+
+<chapter id="cec-api">
+  <title>CEC: Consumer Electronics Control</title>
+
+  <section id="cec-intro">
+    <title>Introduction</title>
+    <para>HDMI connectors provide a single pin for use by the Consumer Electronics
+    Control protocol. This protocol allows different devices connected by an HDMI cable
+    to communicate. The protocol for CEC version 1.4 is defined in supplements 1 (CEC)
+    and 2 (HEAC or HDMI Ethernet and Audio Return Channel) of the HDMI 1.4a
+    (<xref linkend="hdmi" />) specification and the extensions added to CEC version 2.0
+    are defined in chapter 11 of the HDMI 2.0 (<xref linkend="hdmi2" />) specification.
+    </para>
+
+    <para>The bitrate is very slow (effectively no more than 36 bytes per second) and
+    is based on the ancient AV.link protocol used in old SCART connectors. The protocol
+    closely resembles a crazy Rube Goldberg contraption and is an unholy mix of low and
+    high level messages. Some messages, especially those part of the HEAC protocol layered
+    on top of CEC, need to be handled by the kernel, others can be handled either by the
+    kernel or by userspace.</para>
+
+    <para>In addition, CEC can be implemented in HDMI receivers, transmitters and in USB
+    devices that have an HDMI input and an HDMI output and that control just the CEC pin.</para>
+
+    <para>Drivers that support CEC and that allow (or require) userspace to handle CEC
+    messages and/or configure the CEC adapter will create a CEC device node (/dev/cecX)
+    to give userspace access to the CEC adapter. The &CEC-ADAP-G-CAPS; ioctl will tell userspace
+    what it is allowed to do.</para>
+  </section>
+</chapter>
+
+<appendix id="cec-user-func">
+  <title>Function Reference</title>
+  <!-- Keep this alphabetically sorted. -->
+  &sub-cec-func-open;
+  &sub-cec-func-close;
+  &sub-cec-func-ioctl;
+  &sub-cec-func-poll;
+  <!-- All ioctls go here. -->
+  &sub-cec-ioc-adap-g-caps;
+  &sub-cec-ioc-adap-g-log-addrs;
+  &sub-cec-ioc-adap-g-phys-addr;
+  &sub-cec-ioc-adap-g-state;
+  &sub-cec-ioc-adap-g-vendor-id;
+  &sub-cec-ioc-dqevent;
+  &sub-cec-ioc-g-monitor;
+  &sub-cec-ioc-g-passthrough;
+  &sub-cec-ioc-receive;
+</appendix>
diff --git a/Documentation/DocBook/media/v4l/cec-func-close.xml b/Documentation/DocBook/media/v4l/cec-func-close.xml
new file mode 100644
index 0000000..c3978af
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-func-close.xml
@@ -0,0 +1,59 @@
+<refentry id="cec-func-close">
+  <refmeta>
+    <refentrytitle>cec close()</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>cec-close</refname>
+    <refpurpose>Close a cec device</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcsynopsisinfo>#include &lt;unistd.h&gt;</funcsynopsisinfo>
+      <funcprototype>
+	<funcdef>int <function>close</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>Closes the cec device. Resources associated with the file descriptor
+    are freed. The device configuration remain unchanged.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Return Value</title>
+
+    <para><function>close</function> returns 0 on success. On error, -1 is
+    returned, and <varname>errno</varname> is set appropriately. Possible error
+    codes are:</para>
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EBADF</errorcode></term>
+	<listitem>
+	  <para><parameter>fd</parameter> is not a valid open file descriptor.
+	  </para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-func-ioctl.xml b/Documentation/DocBook/media/v4l/cec-func-ioctl.xml
new file mode 100644
index 0000000..ad85973
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-func-ioctl.xml
@@ -0,0 +1,73 @@
+<refentry id="cec-func-ioctl">
+  <refmeta>
+    <refentrytitle>cec ioctl()</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>cec-ioctl</refname>
+    <refpurpose>Control a cec device</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcsynopsisinfo>#include &lt;sys/ioctl.h&gt;</funcsynopsisinfo>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>void *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC ioctl request code as defined in the cec.h header file,
+	  for example CEC_G_CAPS.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para>Pointer to a request-specific structure.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+    <para>The <function>ioctl()</function> function manipulates cec device
+    parameters. The argument <parameter>fd</parameter> must be an open file
+    descriptor.</para>
+    <para>The ioctl <parameter>request</parameter> code specifies the cec
+    function to be called. It has encoded in it whether the argument is an
+    input, output or read/write parameter, and the size of the argument
+    <parameter>argp</parameter> in bytes.</para>
+    <para>Macros and structures definitions specifying cec ioctl requests and
+    their parameters are located in the cec.h header file. All cec ioctl
+    requests, their respective function and parameters are specified in
+    <xref linkend="cec-user-func" />.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <para>Request-specific error codes are listed in the
+    individual requests descriptions.</para>
+    <para>When an ioctl that takes an output or read/write parameter fails,
+    the parameter remains unmodified.</para>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-func-open.xml b/Documentation/DocBook/media/v4l/cec-func-open.xml
new file mode 100644
index 0000000..d814847
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-func-open.xml
@@ -0,0 +1,94 @@
+<refentry id="cec-func-open">
+  <refmeta>
+    <refentrytitle>cec open()</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>cec-open</refname>
+    <refpurpose>Open a cec device</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcsynopsisinfo>#include &lt;fcntl.h&gt;</funcsynopsisinfo>
+      <funcprototype>
+	<funcdef>int <function>open</function></funcdef>
+	<paramdef>const char *<parameter>device_name</parameter></paramdef>
+	<paramdef>int <parameter>flags</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>device_name</parameter></term>
+	<listitem>
+	  <para>Device to be opened.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>flags</parameter></term>
+	<listitem>
+	  <para>Open flags. Access mode must be either <constant>O_RDONLY</constant>
+	  or <constant>O_RDWR</constant>. Other flags have no effect.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  <refsect1>
+    <title>Description</title>
+    <para>To open a cec device applications call <function>open()</function>
+    with the desired device name. The function has no side effects; the device
+    configuration remain unchanged.</para>
+    <para>When the device is opened in read-only mode, attempts to modify its
+    configuration will result in an error, and <varname>errno</varname> will be
+    set to <errorcode>EBADF</errorcode>.</para>
+  </refsect1>
+  <refsect1>
+    <title>Return Value</title>
+
+    <para><function>open</function> returns the new file descriptor on success.
+    On error, -1 is returned, and <varname>errno</varname> is set appropriately.
+    Possible error codes are:</para>
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EACCES</errorcode></term>
+	<listitem>
+	  <para>The requested access to the file is not allowed.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EMFILE</errorcode></term>
+	<listitem>
+	  <para>The  process  already  has  the  maximum number of files open.
+	  </para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>ENFILE</errorcode></term>
+	<listitem>
+	  <para>The system limit on the total number of open files has been
+	  reached.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>ENOMEM</errorcode></term>
+	<listitem>
+	  <para>Insufficient kernel memory was available.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>ENXIO</errorcode></term>
+	<listitem>
+	  <para>No device corresponding to this device special file exists.
+	  </para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-func-poll.xml b/Documentation/DocBook/media/v4l/cec-func-poll.xml
new file mode 100644
index 0000000..6853817
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-func-poll.xml
@@ -0,0 +1,89 @@
+<refentry id="cec-func-poll">
+  <refmeta>
+    <refentrytitle>cec poll()</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>cec-poll</refname>
+    <refpurpose>Wait for some event on a file descriptor</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcsynopsisinfo>#include &lt;sys/poll.h&gt;</funcsynopsisinfo>
+      <funcprototype>
+	<funcdef>int <function>poll</function></funcdef>
+	<paramdef>struct pollfd *<parameter>ufds</parameter></paramdef>
+	<paramdef>unsigned int <parameter>nfds</parameter></paramdef>
+	<paramdef>int <parameter>timeout</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>With the <function>poll()</function> function applications
+can wait for CEC events.</para>
+
+    <para>On success <function>poll()</function> returns the number of
+file descriptors that have been selected (that is, file descriptors
+for which the <structfield>revents</structfield> field of the
+respective <structname>pollfd</structname> structure is non-zero).
+CEC devices set the <constant>POLLIN</constant> and
+<constant>POLLRDNORM</constant> flags in the
+<structfield>revents</structfield> field if there are messages in the
+receive queue. If the transmit queue has room for new messages, the
+<constant>POLLOUT</constant> and <constant>POLLWRNORM</constant>
+flags are set. If there are events in the event queue, then the
+<constant>POLLPRI</constant> flag is set.
+When the function timed out it returns a value of zero, on
+failure it returns <returnvalue>-1</returnvalue> and the
+<varname>errno</varname> variable is set appropriately.
+</para>
+
+    <para>For more details see the
+<function>poll()</function> manual page.</para>
+  </refsect1>
+
+  <refsect1>
+    <title>Return Value</title>
+
+    <para>On success, <function>poll()</function> returns the number
+structures which have non-zero <structfield>revents</structfield>
+fields, or zero if the call timed out. On error
+<returnvalue>-1</returnvalue> is returned, and the
+<varname>errno</varname> variable is set appropriately:</para>
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EBADF</errorcode></term>
+	<listitem>
+	  <para>One or more of the <parameter>ufds</parameter> members
+specify an invalid file descriptor.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EFAULT</errorcode></term>
+	<listitem>
+	  <para><parameter>ufds</parameter> references an inaccessible
+memory area.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EINTR</errorcode></term>
+	<listitem>
+	  <para>The call was interrupted by a signal.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The <parameter>nfds</parameter> argument is greater
+than <constant>OPEN_MAX</constant>.</para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml
new file mode 100644
index 0000000..db20619
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml
@@ -0,0 +1,138 @@
+<refentry id="cec-ioc-adap-g-caps">
+  <refmeta>
+    <refentrytitle>ioctl CEC_ADAP_G_CAPS</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_ADAP_G_CAPS</refname>
+    <refpurpose>Query device capabilities</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct cec_caps *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_ADAP_G_CAPS</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>All cec devices must support the <constant>CEC_ADAP_G_CAPS</constant>
+    ioctl. To query device information, applications call the ioctl with a
+    pointer to a &cec-caps;. The driver fills the structure and returns
+    the information to the application.
+    The ioctl never fails.</para>
+
+    <table pgwide="1" frame="none" id="cec-caps">
+      <title>struct <structname>cec_caps</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>available_log_addrs</structfield></entry>
+	    <entry>How many logical addresses does the CEC adapter support. This will
+	    be at most <constant>CEC_MAX_LOG_ADDRS</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>capabilities</structfield></entry>
+	    <entry>The capabilities of the CEC adapter, see <xref
+		linkend="cec-capabilities" />.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>reserved</structfield>[40]</entry>
+	    <entry>Reserved for future extensions. Drivers must
+	    set this array to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="cec-capabilities">
+      <title>CEC Capabilities Flags</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_CAP_STATE</constant></entry>
+	    <entry>0x00000001</entry>
+	    <entry>Userspace has to configure the adapter state (enable or disable it) by
+	    calling &CEC-ADAP-S-STATE;.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_CAP_PHYS_ADDR</constant></entry>
+	    <entry>0x00000002</entry>
+	    <entry>Userspace has to configure the physical address by
+	    calling &CEC-ADAP-S-PHYS-ADDR;.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_CAP_LOG_ADDRS</constant></entry>
+	    <entry>0x00000004</entry>
+	    <entry>Userspace has to configure the logical addresses by
+	    calling &CEC-ADAP-S-LOG-ADDRS;.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_CAP_TRANSMIT</constant></entry>
+	    <entry>0x00000008</entry>
+	    <entry>Userspace can transmit messages by calling &CEC-TRANSMIT;.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_CAP_RECEIVE</constant></entry>
+	    <entry>0x00000010</entry>
+	    <entry>Userspace can receive messages by calling &CEC-RECEIVE;.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_CAP_VENDOR_ID</constant></entry>
+	    <entry>0x00000020</entry>
+	    <entry>Userspace has to configure the vendor ID by
+	    calling &CEC-ADAP-S-VENDOR-ID;.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_CAP_PASSTHROUGH</constant></entry>
+	    <entry>0x00000040</entry>
+	    <entry>Userspace can use the passthrough mode by
+	    calling &CEC-G-PASSTHROUGH;.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml
new file mode 100644
index 0000000..4d6575c
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml
@@ -0,0 +1,306 @@
+<refentry id="cec-ioc-adap-g-log-addrs">
+  <refmeta>
+    <refentrytitle>ioctl CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_ADAP_G_LOG_ADDRS</refname>
+    <refname>CEC_ADAP_S_LOG_ADDRS</refname>
+    <refpurpose>Get or set the logical addresses</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct cec_log_addrs *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To query the current CEC logical addresses applications call the
+<constant>CEC_ADAP_G_LOG_ADDRS</constant> ioctl with a pointer to a
+<structname>cec_log_addrs</structname> structure where the drivers stores the
+logical addresses.</para>
+
+    <para>To set new logical addresses applications fill in struct <structname>cec_log_addrs</structname>
+and call the <constant>CEC_ADAP_S_LOG_ADDRS</constant> ioctl with a pointer to this struct.
+The <constant>CEC_ADAP_S_LOG_ADDRS</constant> ioctl is only available if
+<constant>CEC_CAP_LOG_ADDRS</constant> is set. This ioctl will block until all
+requested logical addresses have been claimed.</para>
+
+    <table pgwide="1" frame="none" id="cec-log-addrs">
+      <title>struct <structname>cec_log_addrs</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>cec_version</structfield></entry>
+	    <entry>The CEC version that this adapter shall use. See
+	    <xref linkend="cec-versions" />.
+	    Used to implement the <constant>CEC_MSG_CEC_VERSION</constant> and
+	    <constant>CEC_MSG_REPORT_FEATURES</constant> messages. Note that
+	    <constant>CEC_OP_CEC_VERSION_1_3A</constant> is not allowed
+	    by the CEC framework.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>num_log_addrs</structfield></entry>
+	    <entry>Number of logical addresses to set up. Must be &le;
+	    <structfield>available_log_addrs</structfield> as returned by
+	    &CEC-ADAP-G-CAPS;. All arrays in this structure are only filled up to
+	    index <structfield>available_log_addrs</structfield>-1. The remaining
+	    array elements will be ignored. Note that the CEC 2.0 standard allows
+	    for a maximum of 2 logical addresses, although some hardware has support
+	    for more. <constant>CEC_MAX_LOG_ADDRS</constant> is 4. The driver will
+	    return the actual number of logical addresses it could claim, which may
+	    be less than what was requested. If this field is set to 0, then the
+	    CEC adapter shall clear all claimed logical addresses and all other
+	    fields will be ignored.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>primary_device_type</structfield>[CEC_MAX_LOG_ADDRS]</entry>
+	    <entry>Primary device type for each logical address. See
+	    <xref linkend="cec-prim-dev-types" /> for possible types.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>log_addr_type</structfield>[CEC_MAX_LOG_ADDRS]</entry>
+	    <entry>Logical address types. See <xref linkend="cec-log-addr-types" /> for
+	    possible types. The driver will update this with the actual logical address
+	    type that it claimed (e.g. it may have to fallback to
+	    <constant>CEC_LOG_ADDR_TYPE_UNREGISTERED</constant>).</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>log_addr</structfield>[CEC_MAX_LOG_ADDRS]</entry>
+	    <entry>The actual logical addresses that were claimed. This is set by the
+	    driver. If no logical address could be claimed, then it is set to
+	    <constant>CEC_LOG_ADDR_INVALID</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry>char</entry>
+	    <entry><structfield>osd_name</structfield>[15]</entry>
+	    <entry>The actual logical addresses that were claimed. This is set by the
+	    driver. If no logical address could be claimed, then it is set to
+	    <constant>CEC_LOG_ADDR_INVALID</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>all_device_types</structfield>[CEC_MAX_LOG_ADDRS]</entry>
+	    <entry>CEC 2.0 specific: all device types. See <xref linkend="cec-all-dev-types-flags" />.
+	    Used to implement the <constant>CEC_MSG_REPORT_FEATURES</constant> message.
+	    This field is ignored if <structfield>cec_version</structfield> &lt;
+	    <constant>CEC_OP_CEC_VERSION_2_0</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>features</structfield>[CEC_MAX_LOG_ADDRS][12]</entry>
+	    <entry>Features for each logical address. Used to implement the
+	    <constant>CEC_MSG_REPORT_FEATURES</constant> message. The 12 bytes include
+	    both the RC Profile and the Device Features.
+	    This field is ignored if <structfield>cec_version</structfield> &lt;
+	    <constant>CEC_OP_CEC_VERSION_2_0</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>reserved</structfield>[63]</entry>
+	    <entry>Reserved for future extensions. Drivers and applications must
+	    set this array to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="cec-versions">
+      <title>CEC Versions</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_OP_CEC_VERSION_1_3A</constant></entry>
+	    <entry>4</entry>
+	    <entry>CEC version according to the HDMI 1.3a standard.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_CEC_VERSION_1_4B</constant></entry>
+	    <entry>5</entry>
+	    <entry>CEC version according to the HDMI 1.4b standard.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_CEC_VERSION_2_0</constant></entry>
+	    <entry>6</entry>
+	    <entry>CEC version according to the HDMI 2.0 standard.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="cec-prim-dev-types">
+      <title>CEC Primary Device Types</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_OP_PRIM_DEVTYPE_TV</constant></entry>
+	    <entry>0</entry>
+	    <entry>Use for a TV.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_PRIM_DEVTYPE_RECORD</constant></entry>
+	    <entry>1</entry>
+	    <entry>Use for a recording device.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_PRIM_DEVTYPE_TUNER</constant></entry>
+	    <entry>3</entry>
+	    <entry>Use for a device with a tuner.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_PRIM_DEVTYPE_PLAYBACK</constant></entry>
+	    <entry>4</entry>
+	    <entry>Use for a playback device.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM</constant></entry>
+	    <entry>5</entry>
+	    <entry>Use for an audio system (e.g. an audio/video receiver).</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_PRIM_DEVTYPE_SWITCH</constant></entry>
+	    <entry>6</entry>
+	    <entry>Use for a CEC switch.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_PRIM_DEVTYPE_VIDEOPROC</constant></entry>
+	    <entry>7</entry>
+	    <entry>Use for a video processor device.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="cec-log-addr-types">
+      <title>CEC Logical Address Types</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_LOG_ADDR_TYPE_TV</constant></entry>
+	    <entry>0</entry>
+	    <entry>Use for a TV.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_LOG_ADDR_TYPE_RECORD</constant></entry>
+	    <entry>1</entry>
+	    <entry>Use for a recording device.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_LOG_ADDR_TYPE_TUNER</constant></entry>
+	    <entry>2</entry>
+	    <entry>Use for a tuner device.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_LOG_ADDR_TYPE_PLAYBACK</constant></entry>
+	    <entry>3</entry>
+	    <entry>Use for a playback device.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_LOG_ADDR_TYPE_AUDIOSYSTEM</constant></entry>
+	    <entry>4</entry>
+	    <entry>Use for an audio system device.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_LOG_ADDR_TYPE_SPECIFIC</constant></entry>
+	    <entry>5</entry>
+	    <entry>Use for a second TV or for a video processor device.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_LOG_ADDR_TYPE_UNREGISTERED</constant></entry>
+	    <entry>6</entry>
+	    <entry>Fallback if all relevant logical addresses are claimed, or for
+	    pure CEC switches or CDC-only devices (CDC: Capability Discovery and Control).</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="cec-all-dev-types-flags">
+      <title>CEC All Device Types Flags</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_OP_ALL_DEVTYPE_TV</constant></entry>
+	    <entry>0x80</entry>
+	    <entry>This supports the TV type.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_ALL_DEVTYPE_RECORD</constant></entry>
+	    <entry>0x40</entry>
+	    <entry>This supports the Recording type.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_ALL_DEVTYPE_TUNER</constant></entry>
+	    <entry>0x20</entry>
+	    <entry>This supports the Tuner type.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_ALL_DEVTYPE_PLAYBACK</constant></entry>
+	    <entry>0x10</entry>
+	    <entry>This supports the Playback type.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM</constant></entry>
+	    <entry>0x08</entry>
+	    <entry>This supports the Audio System type.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_OP_ALL_DEVTYPE_SWITCH</constant></entry>
+	    <entry>0x04</entry>
+	    <entry>This supports the CEC Switch or Video Processing type.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml
new file mode 100644
index 0000000..4d2827c
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml
@@ -0,0 +1,78 @@
+<refentry id="cec-ioc-adap-g-phys-addr">
+  <refmeta>
+    <refentrytitle>ioctl CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_ADAP_G_PHYS_ADDR</refname>
+    <refname>CEC_ADAP_S_PHYS_ADDR</refname>
+    <refpurpose>Get or set the physical address</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>__u16 *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To query the current physical address applications call the
+<constant>CEC_ADAP_G_PHYS_ADDR</constant> ioctl with a pointer to an __u16
+where the driver stores the physical address.</para>
+
+    <para>To set a new physical address applications store the physical address in
+an __u16 and call the <constant>CEC_ADAP_S_PHYS_ADDR</constant> ioctl with a
+pointer to this integer. <constant>CEC_ADAP_S_PHYS_ADDR</constant> is only
+available if <constant>CEC_CAP_PHYS_ADDR</constant> is set.</para>
+
+    <para>The physical address is a 16-bit number where each group of 4 bits
+represent a digit of the physical address a.b.c.d where the most significant
+4 bits represent 'a'. The CEC root device (usually the TV) has address 0.0.0.0.
+Every device that is hooked up to an input of the TV has address a.0.0.0 (where
+'a' is &ge; 1), devices hooked up to those in turn have addresses a.b.0.0, etc.
+So a topology of up to 5 devices deep is supported. The physical address a
+device shall use is stored in the EDID of the sink.</para>
+
+<para>For example, the EDID for each HDMI input of the TV will have a different
+physical address of the form a.0.0.0 that the sources will read out and use as
+their physical address.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml
new file mode 100644
index 0000000..19d1d45
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml
@@ -0,0 +1,87 @@
+<refentry id="cec-ioc-adap-g-state">
+  <refmeta>
+    <refentrytitle>ioctl CEC_ADAP_G_STATE, CEC_ADAP_S_STATE</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_ADAP_G_STATE</refname>
+    <refname>CEC_ADAP_S_STATE</refname>
+    <refpurpose>Get or set the adapter state</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>__u32 *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_ADAP_G_STATE, CEC_ADAP_S_STATE</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To query the current adapter state applications call the
+<constant>CEC_ADAP_G_STATE</constant> ioctl with a pointer to an __u32
+where the driver stores the state.</para>
+
+    <para>To set the adapter state applications store the CEC adapter state
+in an __u32 and call the <constant>CEC_ADAP_S_STATE</constant> ioctl with a
+pointer to this integer. <constant>CEC_ADAP_S_STATE</constant> is only
+available if <constant>CEC_CAP_STATE</constant> is set.</para>
+
+    <para>Available states are:</para>
+
+    <table pgwide="1" frame="none" id="cec-adap-states">
+      <title>Adapter States</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_ADAP_DISABLED</constant></entry>
+	    <entry>0</entry>
+	    <entry>The adapter is disabled.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_ADAP_ENABLED</constant></entry>
+	    <entry>1</entry>
+	    <entry>The adapter is enabled.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml
new file mode 100644
index 0000000..0bf7731
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml
@@ -0,0 +1,70 @@
+<refentry id="cec-ioc-adap-g-vendor-id">
+  <refmeta>
+    <refentrytitle>ioctl CEC_ADAP_G_VENDOR_ID, CEC_ADAP_S_VENDOR_ID</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_ADAP_G_VENDOR_ID</refname>
+    <refname>CEC_ADAP_S_VENDOR_ID</refname>
+    <refpurpose>Get or set adapter vendor ID</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>__u32 *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_ADAP_G_VENDOR_ID, CEC_ADAP_S_VENDOR_ID</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To query the current CEC adapter vendor ID applications call the
+<constant>CEC_ADAP_G_VENDOR_ID</constant> ioctl with a pointer to an __u32
+where the driver stores the vendor ID.</para>
+
+    <para>To set a new CEC adapter vendor ID applications store the vendor ID in
+an __u32 and call the <constant>CEC_ADAP_S_VENDOR_ID</constant> ioctl with a
+pointer to this integer. <constant>CEC_ADAP_S_VENDOR_ID</constant> is only
+available if <constant>CEC_CAP_VENDOR_ID</constant> is set.</para>
+
+    <para>The vendor ID is a 24-bit number that identifies the specific
+vendor or entity. Based on this ID vendor specific commands may be
+defined.</para>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml b/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml
new file mode 100644
index 0000000..cbde320
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml
@@ -0,0 +1,125 @@
+<refentry id="cec-ioc-g-event">
+  <refmeta>
+    <refentrytitle>ioctl CEC_G_EVENT</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_G_EVENT</refname>
+    <refpurpose>Get a CEC event</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct cec_event *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_G_EVENT</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>CEC devices can send asynchronous events. These can be retrieved by calling
+    the <constant>CEC_G_EVENT</constant> ioctl. If the file descriptor is in non-blocking
+    mode and no event is pending, then it will return -1 and set errno to the &EAGAIN;.</para>
+
+    <para>There can be up to 40 events queued up. If more events are added, then the oldest event will be discarded.</para>
+
+    <table pgwide="1" frame="none" id="cec-event">
+      <title>struct <structname>cec_event</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u64</entry>
+	    <entry><structfield>ts</structfield></entry>
+	    <entry>Timestamp of the event in ns.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>event</structfield></entry>
+	    <entry>The event, see <xref linkend="cec-events" />.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>sequence</structfield></entry>
+	    <entry>For the <constant>CEC_EVENT_GOT_REPLY</constant> event this
+	    holds the sequence number of message that requested the reply.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>reserved</structfield>[8]</entry>
+	    <entry>Reserved for future extensions. Drivers must
+	    set this array to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="cec-events">
+      <title>CEC Events</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_EVENT_CONNECT</constant></entry>
+	    <entry>1</entry>
+	    <entry>Generated when the HDMI cable is connected.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_EVENT_READY</constant></entry>
+	    <entry>2</entry>
+	    <entry>Generated when all logical addresses are claimed.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_EVENT_DISCONNECT</constant></entry>
+	    <entry>3</entry>
+	    <entry>Generated when the HDMI cable is disconnected.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_EVENT_GOT_REPLY</constant></entry>
+	    <entry>4</entry>
+	    <entry>Generated when a reply is received for a previously sent
+	    message. Generated only if a reply was requested and only if the
+	    message was sent in non-blocking mode.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml b/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml
new file mode 100644
index 0000000..6883003
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml
@@ -0,0 +1,86 @@
+<refentry id="cec-ioc-g-monitor">
+  <refmeta>
+    <refentrytitle>ioctl CEC_G_MONITOR, CEC_S_MONITOR</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_G_MONITOR</refname>
+    <refname>CEC_S_MONITOR</refname>
+    <refpurpose>Get or set the monitor mode</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>__u32 *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_G_MONITOR, CEC_S_MONITOR</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To query the current state of the monitor mode of the current file
+    descriptor applications call the <constant>CEC_G_MONITOR</constant> ioctl
+    with a pointer to an __u32 where the driver stores the state.</para>
+
+    <para>To set the state of the monitor mode of the current file descriptor
+    applications store the monitor mode state in an __u32 and call the
+    <constant>CEC_S_MONITOR</constant> ioctl with a pointer to this integer.</para>
+
+    <para>Available states are:</para>
+
+    <table pgwide="1" frame="none" id="cec-monitor-states">
+      <title>Monitor States</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_MONITOR_DISABLED</constant></entry>
+	    <entry>0</entry>
+	    <entry>The monitor mode is disabled.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_MONITOR_ENABLED</constant></entry>
+	    <entry>1</entry>
+	    <entry>The monitor mode is enabled.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml b/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml
new file mode 100644
index 0000000..127d65e
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml
@@ -0,0 +1,81 @@
+<refentry id="cec-ioc-g-passthrough">
+  <refmeta>
+    <refentrytitle>ioctl CEC_G_PASSTHROUGH</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_G_PASSTHROUGH</refname>
+    <refpurpose>Get the passthrough mode</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>__u32 *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_G_PASSTHROUGH</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To query the current state of the passthrough mode of the current file
+    descriptor the applications call the <constant>CEC_G_PASSTHROUGH</constant> ioctl
+    with a pointer to an __u32 where the driver stores the state.</para>
+
+    <para>Available states are:</para>
+
+    <table pgwide="1" frame="none" id="cec-passthrough-states">
+      <title>Passthrough States</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_PASSTHROUGH_DISABLED</constant></entry>
+	    <entry>0</entry>
+	    <entry>The passthrough mode is disabled.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_PASSTHROUGH_ENABLED</constant></entry>
+	    <entry>1</entry>
+	    <entry>The passthrough is enabled.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/cec-ioc-receive.xml b/Documentation/DocBook/media/v4l/cec-ioc-receive.xml
new file mode 100644
index 0000000..4b793df
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/cec-ioc-receive.xml
@@ -0,0 +1,185 @@
+<refentry id="cec-ioc-receive">
+  <refmeta>
+    <refentrytitle>ioctl CEC_RECEIVE, CEC_TRANSMIT</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>CEC_RECEIVE</refname>
+    <refname>CEC_TRANSMIT</refname>
+    <refpurpose>Receive or transmit a CEC message</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct cec_msg *<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>File descriptor returned by
+	  <link linkend='cec-func-open'><function>open()</function></link>.</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>CEC_RECEIVE, CEC_TRANSMIT</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <para>To receive a CEC message the application has to fill in the
+    <structname>cec_msg</structname> structure and pass it to the
+    <constant>CEC_RECEIVE</constant> ioctl. <constant>CEC_RECEIVE</constant> is
+    only available if <constant>CEC_CAP_RECEIVE</constant> is set. If the
+    file descriptor is in non-blocking mode and there are no received
+    messages pending, then it will return -1 and set errno to the &EAGAIN;.
+    If the file descriptor is in blocking mode and <structfield>timeout</structfield>
+    is non-zero and no message arrived within <structfield>timeout</structfield>
+    milliseconds, then it will return -1 and set errno to the &ETIMEDOUT;.</para>
+
+    <para>To send a CEC message the application has to fill in the
+    <structname>cec_msg</structname> structure and pass it to the
+    <constant>CEC_TRANSMIT</constant> ioctl. <constant>CEC_TRANSMIT</constant> is
+    only available if <constant>CEC_CAP_TRANSMIT</constant> is set.
+    If there is no more room in the transmit queue, then it will return
+    -1 and set errno to the &EBUSY;.</para>
+
+    <table pgwide="1" frame="none" id="cec-msg">
+      <title>struct <structname>cec_msg</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u64</entry>
+	    <entry><structfield>ts</structfield></entry>
+	    <entry>Timestamp of when the message was transmitted in ns in the case
+	    of <constant>CEC_TRANSMIT</constant> with <structfield>reply</structfield>
+	    set to 0, or the timestamp of the received message in all other cases.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>len</structfield></entry>
+	    <entry>The length of the message. For <constant>CEC_TRANSMIT</constant> this
+	    is filled in by the application. The driver will fill this in for
+	    <constant>CEC_RECEIVE</constant> and for <constant>CEC_TRANSMIT</constant>
+	    it will be filled in with the length of the reply message if
+	    <structfield>reply</structfield> was set.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>status</structfield></entry>
+	    <entry>The status of the message. When used with <constant>CEC_RECEIVE</constant>
+	    this is always set to <constant>CEC_RX_STATUS_READY</constant>. When
+	    used with <constant>CEC_TRANSMIT</constant> see <xref linkend="cec-tx-status" />
+	    for the possible status values.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>timeout</structfield></entry>
+	    <entry>The timeout in milliseconds. This is the time we wait for a message to
+	    be received. If it is set to 0, then we wait indefinitely.
+	    It is ignored by <constant>CEC_TRANSMIT</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>msg</structfield>[16]</entry>
+	    <entry>The message payload. For <constant>CEC_TRANSMIT</constant> this
+	    is filled in by the application. The driver will fill this in for
+	    <constant>CEC_RECEIVE</constant> and for <constant>CEC_TRANSMIT</constant>
+	    it will be filled in with the payload of the reply message if
+	    <structfield>reply</structfield> was set.</entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>reply</structfield></entry>
+	    <entry>Wait until this message is replied. If <structfield>reply</structfield>
+	    is 0, then don't wait for a reply but return after transmitting the
+	    message. If there was an error as indicated by a non-zero <structfield>status</structfield>
+	    field, then <structfield>reply</structfield> is set to 0 by the driver.
+	    Ignored by <constant>CEC_RECEIVE</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>sequence</structfield></entry>
+	    <entry>The sequence number is automatically assigned by the CEC
+	    framework for all transmitted messages. It can be later used by the
+	    framework to generate an event if a reply for a message was
+	    requested and the message was transmitted in a non-blocking mode.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry>__u8</entry>
+	    <entry><structfield>reserved</structfield>[35]</entry>
+	    <entry>Reserved for future extensions. Drivers and applications must
+	    set this array to zero.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="cec-tx-status">
+      <title>CEC Transmit Status</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>CEC_TX_STATUS_OK</constant></entry>
+	    <entry>0x00</entry>
+	    <entry>The message was transmitted successfully.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_TX_STATUS_ARB_LOST</constant></entry>
+	    <entry>0x01</entry>
+	    <entry>CEC line arbitration was lost.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_TX_STATUS_RETRY_TIMEOUT</constant></entry>
+	    <entry>0x02</entry>
+	    <entry>The transmit timed out. The timeout period is 200 ms for a polling
+	    message and 1 second for other messages as specified by the CEC protocol.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_TX_STATUS_FEATURE_ABORT</constant></entry>
+	    <entry>0x04</entry>
+	    <entry>The message was transmitted successfully but the reply was
+	    <constant>CEC_MSG_FEATURE_ABORT</constant>.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>CEC_TX_STATUS_REPLY_TIMEOUT</constant></entry>
+	    <entry>0x08</entry>
+	    <entry>The message was transmitted successfully but the reply was never
+	    received within the 1 second timeout period (this timeout value is
+	    specified by the CEC protocol).</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl
index f3f5fe5..3f76d41 100644
--- a/Documentation/DocBook/media_api.tmpl
+++ b/Documentation/DocBook/media_api.tmpl
@@ -38,7 +38,7 @@
 	<title>LINUX MEDIA INFRASTRUCTURE API</title>
 
 	<copyright>
-		<year>2009-2014</year>
+		<year>2009-2015</year>
 		<holder>LinuxTV Developers</holder>
 	</copyright>
 
@@ -75,7 +75,7 @@
 	    </mediaobject>
 	</figure>
 	<para>The media infrastructure API was designed to control such
-	    devices. It is divided into four parts.</para>
+	    devices. It is divided into five parts.</para>
 	<para>The first part covers radio, video capture and output,
 		cameras, analog TV devices and codecs.</para>
 	<para>The second part covers the
@@ -87,6 +87,7 @@
 		<xref linkend="fe-delivery-system-t" />.</para>
 	<para>The third part covers the Remote Controller API.</para>
 	<para>The fourth part covers the Media Controller API.</para>
+	<para>The fifth part covers the CEC (Consumer Electronics Control) API.</para>
 	<para>It should also be noted that a media device may also have audio
 	      components, like mixers, PCM capture, PCM playback, etc, which
 	      are controlled via ALSA API.</para>
@@ -107,6 +108,9 @@
 <part id="media_common">
 &sub-media-controller;
 </part>
+<part id="cec">
+&sub-cec-api;
+</part>
 
 <chapter id="gen_errors">
 &sub-gen-errors;
-- 
2.1.4

[PATCHv8 10/15] v4l2-subdev: add HDMI CEC ops

[Hans Verkuil]

Add CEC callbacks to the v4l2_subdev_video_ops. These are the low-level CEC
ops that subdevs that support CEC have to implement.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil]
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 include/media/v4l2-subdev.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 370fc38..1b04d94 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -42,6 +42,10 @@
 
 #define	V4L2_DEVICE_NOTIFY_EVENT		_IOW('v', 2, struct v4l2_event)
 
+#define V4L2_SUBDEV_CEC_TX_DONE			_IOW('v', 3, u32)
+#define V4L2_SUBDEV_CEC_RX_MSG			_IOW('v', 4, struct cec_msg)
+#define V4L2_SUBDEV_CEC_CONN_INPUTS		_IOW('v', 5, u16)
+
 struct v4l2_device;
 struct v4l2_ctrl_handler;
 struct v4l2_event;
@@ -51,6 +55,7 @@ struct v4l2_subdev;
 struct v4l2_subdev_fh;
 struct tuner_setup;
 struct v4l2_mbus_frame_desc;
+struct cec_msg;
 
 /* decode_vbi_line */
 struct v4l2_decode_vbi_line {
@@ -339,6 +344,10 @@ struct v4l2_subdev_video_ops {
 			     const struct v4l2_mbus_config *cfg);
 	int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
 			   unsigned int *size);
+	unsigned (*cec_available_log_addrs)(struct v4l2_subdev *sd);
+	int (*cec_enable)(struct v4l2_subdev *sd, bool enable);
+	int (*cec_log_addr)(struct v4l2_subdev *sd, u8 logical_addr);
+	int (*cec_transmit)(struct v4l2_subdev *sd, u32 timeout_ms, struct cec_msg *msg);
 };
 
 /*
-- 
2.1.4

[PATCHv8 11/15] cec: adv7604: add cec support.

[Hans Verkuil]

From: Hans Verkuil <hverkuil@xs4all.nl>

Add CEC support to the adv7604 driver.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil]
[k.debski@samsung.com: add missing methods cec/io_write_and_or]
[k.debski@samsung.com: change adv7604 to adv76xx in added functions]
[hansverk@cisco.com: use _clr_set instead of _and_or]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/i2c/adv7604.c | 236 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 232 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 5631ec0..20b0838 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -40,6 +40,7 @@
 #include <linux/regmap.h>
 
 #include <media/adv7604.h>
+#include <media/cec.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-event.h>
@@ -80,6 +81,8 @@ MODULE_LICENSE("GPL");
 
 #define ADV76XX_OP_SWAP_CB_CR				(1 << 0)
 
+#define ADV76XX_MAX_ADDRS (3)
+
 enum adv76xx_type {
 	ADV7604,
 	ADV7611,
@@ -184,6 +187,10 @@ struct adv76xx_state {
 	u16 spa_port_a[2];
 	struct v4l2_fract aspect_ratio;
 	u32 rgb_quantization_range;
+	u8   cec_addr[ADV76XX_MAX_ADDRS];
+	u8   cec_valid_addrs;
+	bool cec_enabled_adap;
+
 	struct workqueue_struct *work_queues;
 	struct delayed_work delayed_work_enable_hotplug;
 	bool restart_stdi_once;
@@ -430,7 +437,8 @@ static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
 	return regmap_write(state->regmap[ADV76XX_PAGE_IO], reg, val);
 }
 
-static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
+static inline int io_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
+				   u8 val)
 {
 	return io_write(sd, reg, (io_read(sd, reg) & ~mask) | val);
 }
@@ -463,6 +471,12 @@ static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
 	return regmap_write(state->regmap[ADV76XX_PAGE_CEC], reg, val);
 }
 
+static inline int cec_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask,
+				   u8 val)
+{
+	return cec_write(sd, reg, (cec_read(sd, reg) & ~mask) | val);
+}
+
 static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
 {
 	struct adv76xx_state *state = to_state(sd);
@@ -550,8 +564,13 @@ static inline int edid_write_block(struct v4l2_subdev *sd,
 
 static void adv76xx_set_hpd(struct adv76xx_state *state, unsigned int hpd)
 {
+	u16 connected_inputs;
 	unsigned int i;
 
+	connected_inputs = hpd & state->info->read_cable_det(&state->sd);
+	v4l2_subdev_notify(&state->sd, V4L2_SUBDEV_CEC_CONN_INPUTS,
+			   &connected_inputs);
+
 	for (i = 0; i < state->info->num_dv_ports; ++i)
 		gpiod_set_value_cansleep(state->hpd_gpio[i], hpd & BIT(i));
 
@@ -891,9 +910,12 @@ static int adv76xx_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
 {
 	struct adv76xx_state *state = to_state(sd);
 	const struct adv76xx_chip_info *info = state->info;
+	u16 cable_det = info->read_cable_det(sd);
+	u16 connected_inputs = state->edid.present & cable_det;
+
+	v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_CONN_INPUTS, &connected_inputs);
 
-	return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl,
-				info->read_cable_det(sd));
+	return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, cable_det);
 }
 
 static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
@@ -1914,6 +1936,186 @@ static int adv76xx_set_format(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static void adv76xx_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
+{
+	if ((cec_read(sd, 0x11) & 0x01) == 0) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
+		return;
+	}
+
+	if (tx_raw_status & 0x02) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: arbitration lost\n",
+			 __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_ARB_LOST);
+		return;
+	}
+	if (tx_raw_status & 0x04) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_RETRY_TIMEOUT);
+		return;
+	}
+	if (tx_raw_status & 0x01) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_OK);
+		return;
+	}
+}
+
+static void adv76xx_cec_isr(struct v4l2_subdev *sd, bool *handled)
+{
+	u8 cec_irq;
+
+	/* cec controller */
+	cec_irq = io_read(sd, 0x4d) & 0x0f;
+	if (!cec_irq)
+		return;
+
+	v4l2_dbg(1, debug, sd, "%s: cec: irq 0x%x\n", __func__, cec_irq);
+	adv76xx_cec_tx_raw_status(sd, cec_irq);
+	if (cec_irq & 0x08) {
+		struct cec_msg msg;
+
+		msg.len = cec_read(sd, 0x25) & 0x1f;
+		if (msg.len > 16)
+			msg.len = 16;
+
+		if (msg.len) {
+			u8 i;
+
+			for (i = 0; i < msg.len; i++)
+				msg.msg[i] = cec_read(sd, i + 0x15);
+			cec_write(sd, 0x26, 0x01); /* re-enable rx */
+			v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_RX_MSG, &msg);
+		}
+	}
+
+	/* note: the bit order is swapped between 0x4d and 0x4e */
+	cec_irq = ((cec_irq & 0x08) >> 3) | ((cec_irq & 0x04) >> 1) |
+		  ((cec_irq & 0x02) << 1) | ((cec_irq & 0x01) << 3);
+	io_write(sd, 0x4e, cec_irq);
+
+	if (handled)
+		*handled = true;
+}
+
+static unsigned adv76xx_cec_available_log_addrs(struct v4l2_subdev *sd)
+{
+	return ADV76XX_MAX_ADDRS;
+}
+
+static int adv76xx_cec_enable(struct v4l2_subdev *sd, bool enable)
+{
+	struct adv76xx_state *state = to_state(sd);
+
+	if (!state->cec_enabled_adap && enable) {
+		cec_write_clr_set(sd, 0x2a, 0x01, 0x01);	/* power up cec */
+		cec_write(sd, 0x2c, 0x01);	/* cec soft reset */
+		cec_write_clr_set(sd, 0x11, 0x01, 0);  /* initially disable tx */
+		/* enabled irqs: */
+		/* tx: ready */
+		/* tx: arbitration lost */
+		/* tx: retry timeout */
+		/* rx: ready */
+		io_write_clr_set(sd, 0x50, 0x0f, 0x0f);
+		cec_write(sd, 0x26, 0x01);            /* enable rx */
+	} else if (state->cec_enabled_adap && !enable) {
+		/* disable cec interrupts */
+		io_write_clr_set(sd, 0x50, 0x0f, 0x00);
+		/* disable address mask 1-3 */
+		cec_write_clr_set(sd, 0x27, 0x70, 0x00);
+		/* power down cec section */
+		cec_write_clr_set(sd, 0x2a, 0x01, 0x00);
+		state->cec_valid_addrs = 0;
+	}
+	state->cec_enabled_adap = enable;
+	adv76xx_s_detect_tx_5v_ctrl(sd);
+	return 0;
+}
+
+static int adv76xx_cec_log_addr(struct v4l2_subdev *sd, u8 addr)
+{
+	struct adv76xx_state *state = to_state(sd);
+	unsigned i, free_idx = ADV76XX_MAX_ADDRS;
+
+	if (!state->cec_enabled_adap)
+		return -EIO;
+
+	if (addr == CEC_LOG_ADDR_INVALID) {
+		cec_write_clr_set(sd, 0x27, 0x70, 0);
+		state->cec_valid_addrs = 0;
+		return 0;
+	}
+
+	for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
+		bool is_valid = state->cec_valid_addrs & (1 << i);
+
+		if (free_idx == ADV76XX_MAX_ADDRS && !is_valid)
+			free_idx = i;
+		if (is_valid && state->cec_addr[i] == addr)
+			return 0;
+	}
+	if (i == ADV76XX_MAX_ADDRS) {
+		i = free_idx;
+		if (i == ADV76XX_MAX_ADDRS)
+			return -ENXIO;
+	}
+	state->cec_addr[i] = addr;
+	state->cec_valid_addrs |= 1 << i;
+
+	switch (i) {
+	case 0:
+		/* enable address mask 0 */
+		cec_write_clr_set(sd, 0x27, 0x10, 0x10);
+		/* set address for mask 0 */
+		cec_write_clr_set(sd, 0x28, 0x0f, addr);
+		break;
+	case 1:
+		/* enable address mask 1 */
+		cec_write_clr_set(sd, 0x27, 0x20, 0x20);
+		/* set address for mask 1 */
+		cec_write_clr_set(sd, 0x28, 0xf0, addr << 4);
+		break;
+	case 2:
+		/* enable address mask 2 */
+		cec_write_clr_set(sd, 0x27, 0x40, 0x40);
+		/* set address for mask 1 */
+		cec_write_clr_set(sd, 0x29, 0x0f, addr);
+		break;
+	}
+	return 0;
+}
+
+static int adv76xx_cec_transmit(struct v4l2_subdev *sd, u32 timeout_ms, struct cec_msg *msg)
+{
+	u8 len = msg->len;
+	unsigned i;
+
+	if (len == 1)
+		/* allow for one retry for polling */
+		cec_write_clr_set(sd, 0x12, 0x07, 1);
+	else
+		/* allow for three retries */
+		cec_write_clr_set(sd, 0x12, 0x07, 3);
+
+	if (len > 16) {
+		v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
+		return -EINVAL;
+	}
+
+	/* write data */
+	for (i = 0; i < len; i++)
+		cec_write(sd, i, msg->msg[i]);
+
+	/* set length (data + header) */
+	cec_write(sd, 0x10, len);
+	/* start transmit, enable tx */
+	cec_write(sd, 0x11, 0x01);
+	return 0;
+}
+
 static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 {
 	struct adv76xx_state *state = to_state(sd);
@@ -1959,6 +2161,9 @@ static int adv76xx_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 			*handled = true;
 	}
 
+	/* cec */
+	adv76xx_cec_isr(sd, handled);
+
 	/* tx 5v detect */
 	tx_5v = io_read(sd, 0x70) & info->cable_det_mask;
 	if (tx_5v) {
@@ -2266,8 +2471,19 @@ static int adv76xx_log_status(struct v4l2_subdev *sd)
 			((edid_enabled & 0x02) ? "Yes" : "No"),
 			((edid_enabled & 0x04) ? "Yes" : "No"),
 			((edid_enabled & 0x08) ? "Yes" : "No"));
-	v4l2_info(sd, "CEC: %s\n", !!(cec_read(sd, 0x2a) & 0x01) ?
+	v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
 			"enabled" : "disabled");
+	if (state->cec_enabled_adap) {
+		int i;
+
+		for (i = 0; i < ADV76XX_MAX_ADDRS; i++) {
+			bool is_valid = state->cec_valid_addrs & (1 << i);
+
+			if (is_valid)
+				v4l2_info(sd, "CEC Logical Address: 0x%x\n",
+					  state->cec_addr[i]);
+		}
+	}
 
 	v4l2_info(sd, "-----Signal status-----\n");
 	cable_det = info->read_cable_det(sd);
@@ -2400,6 +2616,10 @@ static const struct v4l2_subdev_video_ops adv76xx_video_ops = {
 	.s_dv_timings = adv76xx_s_dv_timings,
 	.g_dv_timings = adv76xx_g_dv_timings,
 	.query_dv_timings = adv76xx_query_dv_timings,
+	.cec_available_log_addrs = adv76xx_cec_available_log_addrs,
+	.cec_enable = adv76xx_cec_enable,
+	.cec_log_addr = adv76xx_cec_log_addr,
+	.cec_transmit = adv76xx_cec_transmit,
 };
 
 static const struct v4l2_subdev_pad_ops adv76xx_pad_ops = {
@@ -3249,6 +3469,14 @@ static int adv76xx_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct adv76xx_state *state = to_state(sd);
 
+	/* disable interrupts */
+	io_write(sd, 0x40, 0);
+	io_write(sd, 0x41, 0);
+	io_write(sd, 0x46, 0);
+	io_write(sd, 0x6e, 0);
+	io_write(sd, 0x73, 0);
+	adv76xx_cec_enable(sd, false);
+
 	cancel_delayed_work(&state->delayed_work_enable_hotplug);
 	destroy_workqueue(state->work_queues);
 	v4l2_async_unregister_subdev(sd);
-- 
2.1.4

[PATCHv8 12/15] cec: adv7842: add cec support

[Hans Verkuil]

Add CEC support to the adv7842 driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/i2c/adv7842.c | 250 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 233 insertions(+), 17 deletions(-)

diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index b7269b8..73c67c4 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -39,6 +39,7 @@
 #include <linux/workqueue.h>
 #include <linux/v4l2-dv-timings.h>
 #include <linux/hdmi.h>
+#include <media/cec.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-event.h>
 #include <media/v4l2-ctrls.h>
@@ -79,6 +80,8 @@ MODULE_LICENSE("GPL");
 
 #define ADV7842_OP_SWAP_CB_CR				(1 << 0)
 
+#define ADV7842_MAX_ADDRS (3)
+
 /*
 **********************************************************************
 *
@@ -142,6 +145,10 @@ struct adv7842_state {
 	struct v4l2_ctrl *free_run_color_ctrl_manual;
 	struct v4l2_ctrl *free_run_color_ctrl;
 	struct v4l2_ctrl *rgb_quantization_range_ctrl;
+
+	u8   cec_addr[ADV7842_MAX_ADDRS];
+	u8   cec_valid_addrs;
+	bool cec_enabled_adap;
 };
 
 /* Unsupported timings. This device cannot support 720p30. */
@@ -418,9 +425,9 @@ static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
 	return adv_smbus_write_byte_data(state->i2c_cec, reg, val);
 }
 
-static inline int cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
+static inline int cec_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
 {
-	return cec_write(sd, reg, (cec_read(sd, reg) & mask) | val);
+	return cec_write(sd, reg, (cec_read(sd, reg) & ~mask) | val);
 }
 
 static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
@@ -696,6 +703,18 @@ adv7842_get_dv_timings_cap(struct v4l2_subdev *sd)
 
 /* ----------------------------------------------------------------------- */
 
+static u16 adv7842_read_cable_det(struct v4l2_subdev *sd)
+{
+	u8 reg = io_read(sd, 0x6f);
+	u16 val = 0;
+
+	if (reg & 0x02)
+		val |= 1; /* port A */
+	if (reg & 0x01)
+		val |= 2; /* port B */
+	return val;
+}
+
 static void adv7842_delayed_work_enable_hotplug(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
@@ -703,8 +722,13 @@ static void adv7842_delayed_work_enable_hotplug(struct work_struct *work)
 			struct adv7842_state, delayed_work_enable_hotplug);
 	struct v4l2_subdev *sd = &state->sd;
 	int present = state->hdmi_edid.present;
+	u16 connected_inputs;
 	u8 mask = 0;
 
+	connected_inputs = present & adv7842_read_cable_det(sd);
+	v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_CONN_INPUTS,
+			   &connected_inputs);
+
 	v4l2_dbg(2, debug, sd, "%s: enable hotplug on ports: 0x%x\n",
 			__func__, present);
 
@@ -983,20 +1007,16 @@ static int adv7842_s_register(struct v4l2_subdev *sd,
 static int adv7842_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
 {
 	struct adv7842_state *state = to_state(sd);
-	int prev = v4l2_ctrl_g_ctrl(state->detect_tx_5v_ctrl);
-	u8 reg_io_6f = io_read(sd, 0x6f);
-	int val = 0;
+	u16 cable_det = adv7842_read_cable_det(sd);
+	u16 connected_inputs;
 
-	if (reg_io_6f & 0x02)
-		val |= 1; /* port A */
-	if (reg_io_6f & 0x01)
-		val |= 2; /* port B */
+	v4l2_dbg(1, debug, sd, "%s: 0x%x\n", __func__, cable_det);
 
-	v4l2_dbg(1, debug, sd, "%s: 0x%x -> 0x%x\n", __func__, prev, val);
+	connected_inputs = state->hdmi_edid.present & cable_det;
+	v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_CONN_INPUTS,
+			   &connected_inputs);
 
-	if (val != prev)
-		return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, val);
-	return 0;
+	return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, cable_det);
 }
 
 static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
@@ -2157,6 +2177,182 @@ static void adv7842_irq_enable(struct v4l2_subdev *sd, bool enable)
 	}
 }
 
+static void adv7842_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
+{
+	if ((cec_read(sd, 0x11) & 0x01) == 0) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
+		return;
+	}
+
+	if (tx_raw_status & 0x02) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: arbitration lost\n",
+			 __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_ARB_LOST);
+		return;
+	}
+	if (tx_raw_status & 0x04) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_RETRY_TIMEOUT);
+		return;
+	}
+	if (tx_raw_status & 0x01) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_OK);
+		return;
+	}
+}
+
+static void adv7842_cec_isr(struct v4l2_subdev *sd, bool *handled)
+{
+	u8 cec_irq;
+
+	/* cec controller */
+	cec_irq = io_read(sd, 0x93) & 0x0f;
+	if (!cec_irq)
+		return;
+
+	v4l2_dbg(1, debug, sd, "%s: cec: irq 0x%x\n", __func__, cec_irq);
+	adv7842_cec_tx_raw_status(sd, cec_irq);
+	if (cec_irq & 0x08) {
+		struct cec_msg msg;
+
+		msg.len = cec_read(sd, 0x25) & 0x1f;
+		if (msg.len > 16)
+			msg.len = 16;
+
+		if (msg.len) {
+			u8 i;
+
+			for (i = 0; i < msg.len; i++)
+				msg.msg[i] = cec_read(sd, i + 0x15);
+			cec_write(sd, 0x26, 0x01); /* re-enable rx */
+			v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_RX_MSG, &msg);
+		}
+	}
+
+	io_write(sd, 0x94, cec_irq);
+
+	if (handled)
+		*handled = true;
+}
+
+static unsigned adv7842_cec_available_log_addrs(struct v4l2_subdev *sd)
+{
+	return ADV7842_MAX_ADDRS;
+}
+
+static int adv7842_cec_enable(struct v4l2_subdev *sd, bool enable)
+{
+	struct adv7842_state *state = to_state(sd);
+
+	if (!state->cec_enabled_adap && enable) {
+		cec_write_clr_set(sd, 0x2a, 0x01, 0x01);	/* power up cec */
+		cec_write(sd, 0x2c, 0x01);	/* cec soft reset */
+		cec_write_clr_set(sd, 0x11, 0x01, 0);  /* initially disable tx */
+		/* enabled irqs: */
+		/* tx: ready */
+		/* tx: arbitration lost */
+		/* tx: retry timeout */
+		/* rx: ready */
+		io_write_clr_set(sd, 0x96, 0x0f, 0x0f);
+		cec_write(sd, 0x26, 0x01);            /* enable rx */
+	} else if (state->cec_enabled_adap && !enable) {
+		/* disable cec interrupts */
+		io_write_clr_set(sd, 0x96, 0x0f, 0x00);
+		/* disable address mask 1-3 */
+		cec_write_clr_set(sd, 0x27, 0x70, 0x00);
+		/* power down cec section */
+		cec_write_clr_set(sd, 0x2a, 0x01, 0x00);
+		state->cec_valid_addrs = 0;
+	}
+	state->cec_enabled_adap = enable;
+	return 0;
+}
+
+static int adv7842_cec_log_addr(struct v4l2_subdev *sd, u8 addr)
+{
+	struct adv7842_state *state = to_state(sd);
+	unsigned i, free_idx = ADV7842_MAX_ADDRS;
+
+	if (!state->cec_enabled_adap)
+		return -EIO;
+
+	if (addr == CEC_LOG_ADDR_INVALID) {
+		cec_write_clr_set(sd, 0x27, 0x70, 0);
+		state->cec_valid_addrs = 0;
+		return 0;
+	}
+
+	for (i = 0; i < ADV7842_MAX_ADDRS; i++) {
+		bool is_valid = state->cec_valid_addrs & (1 << i);
+
+		if (free_idx == ADV7842_MAX_ADDRS && !is_valid)
+			free_idx = i;
+		if (is_valid && state->cec_addr[i] == addr)
+			return 0;
+	}
+	if (i == ADV7842_MAX_ADDRS) {
+		i = free_idx;
+		if (i == ADV7842_MAX_ADDRS)
+			return -ENXIO;
+	}
+	state->cec_addr[i] = addr;
+	state->cec_valid_addrs |= 1 << i;
+
+	switch (i) {
+	case 0:
+		/* enable address mask 0 */
+		cec_write_clr_set(sd, 0x27, 0x10, 0x10);
+		/* set address for mask 0 */
+		cec_write_clr_set(sd, 0x28, 0x0f, addr);
+		break;
+	case 1:
+		/* enable address mask 1 */
+		cec_write_clr_set(sd, 0x27, 0x20, 0x20);
+		/* set address for mask 1 */
+		cec_write_clr_set(sd, 0x28, 0xf0, addr << 4);
+		break;
+	case 2:
+		/* enable address mask 2 */
+		cec_write_clr_set(sd, 0x27, 0x40, 0x40);
+		/* set address for mask 1 */
+		cec_write_clr_set(sd, 0x29, 0x0f, addr);
+		break;
+	}
+	return 0;
+}
+
+static int adv7842_cec_transmit(struct v4l2_subdev *sd, u32 timeout_ms, struct cec_msg *msg)
+{
+	u8 len = msg->len;
+	unsigned i;
+
+	if (len == 1)
+		/* allow for one retry for polling */
+		cec_write_clr_set(sd, 0x12, 0x07, 1);
+	else
+		/* allow for three retries */
+		cec_write_clr_set(sd, 0x12, 0x07, 3);
+
+	if (len > 16) {
+		v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
+		return -EINVAL;
+	}
+
+	/* write data */
+	for (i = 0; i < len; i++)
+		cec_write(sd, i, msg->msg[i]);
+
+	/* set length (data + header) */
+	cec_write(sd, 0x10, len);
+	/* start transmit, enable tx */
+	cec_write(sd, 0x11, 0x01);
+	return 0;
+}
+
 static int adv7842_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 {
 	struct adv7842_state *state = to_state(sd);
@@ -2228,6 +2424,9 @@ static int adv7842_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 			*handled = true;
 	}
 
+	/* cec */
+	adv7842_cec_isr(sd, handled);
+
 	/* tx 5v detect */
 	if (irq_status[2] & 0x3) {
 		v4l2_dbg(1, debug, sd, "%s: irq tx_5v\n", __func__);
@@ -2308,10 +2507,12 @@ static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
 	case ADV7842_EDID_PORT_A:
 	case ADV7842_EDID_PORT_B:
 		memset(&state->hdmi_edid.edid, 0, 256);
-		if (e->blocks)
+		if (e->blocks) {
 			state->hdmi_edid.present |= 0x04 << e->pad;
-		else
+		} else {
 			state->hdmi_edid.present &= ~(0x04 << e->pad);
+			adv7842_s_detect_tx_5v_ctrl(sd);
+		}
 		memcpy(&state->hdmi_edid.edid, e->edid, 128 * e->blocks);
 		err = edid_write_hdmi_segment(sd, e->pad);
 		break;
@@ -2496,8 +2697,19 @@ static int adv7842_cp_log_status(struct v4l2_subdev *sd)
 	v4l2_info(sd, "HPD A %s, B %s\n",
 		  reg_io_0x21 & 0x02 ? "enabled" : "disabled",
 		  reg_io_0x21 & 0x01 ? "enabled" : "disabled");
-	v4l2_info(sd, "CEC %s\n", !!(cec_read(sd, 0x2a) & 0x01) ?
+	v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
 			"enabled" : "disabled");
+	if (state->cec_enabled_adap) {
+		int i;
+
+		for (i = 0; i < ADV7842_MAX_ADDRS; i++) {
+			bool is_valid = state->cec_valid_addrs & (1 << i);
+
+			if (is_valid)
+				v4l2_info(sd, "CEC Logical Address: 0x%x\n",
+					  state->cec_addr[i]);
+		}
+	}
 
 	v4l2_info(sd, "-----Signal status-----\n");
 	if (state->hdmi_port_a) {
@@ -3045,6 +3257,10 @@ static const struct v4l2_subdev_video_ops adv7842_video_ops = {
 	.s_dv_timings = adv7842_s_dv_timings,
 	.g_dv_timings = adv7842_g_dv_timings,
 	.query_dv_timings = adv7842_query_dv_timings,
+	.cec_available_log_addrs = adv7842_cec_available_log_addrs,
+	.cec_enable = adv7842_cec_enable,
+	.cec_log_addr = adv7842_cec_log_addr,
+	.cec_transmit = adv7842_cec_transmit,
 };
 
 static const struct v4l2_subdev_pad_ops adv7842_pad_ops = {
@@ -3341,7 +3557,7 @@ static int adv7842_remove(struct i2c_client *client)
 	struct adv7842_state *state = to_state(sd);
 
 	adv7842_irq_enable(sd, false);
-
+	adv7842_cec_enable(sd, false);
 	cancel_delayed_work(&state->delayed_work_enable_hotplug);
 	destroy_workqueue(state->work_queues);
 	v4l2_device_unregister_subdev(sd);
-- 
2.1.4

[PATCHv8 13/15] cec: adv7511: add cec support.

[Hans Verkuil]

Add CEC support to the adv7511 driver.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil]
Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/i2c/adv7511.c | 359 +++++++++++++++++++++++++++++++++++++++++++-
 include/media/adv7511.h     |   6 +-
 2 files changed, 353 insertions(+), 12 deletions(-)

diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c
index e4900df..645d4ba 100644
--- a/drivers/media/i2c/adv7511.c
+++ b/drivers/media/i2c/adv7511.c
@@ -33,6 +33,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-dv-timings.h>
 #include <media/adv7511.h>
+#include <media/cec.h>
 
 static int debug;
 module_param(debug, int, 0644);
@@ -59,6 +60,8 @@ MODULE_LICENSE("GPL v2");
 #define ADV7511_MIN_PIXELCLOCK 20000000
 #define ADV7511_MAX_PIXELCLOCK 225000000
 
+#define ADV7511_MAX_ADDRS (3)
+
 /*
 **********************************************************************
 *
@@ -90,12 +93,19 @@ struct adv7511_state {
 	struct v4l2_ctrl_handler hdl;
 	int chip_revision;
 	u8 i2c_edid_addr;
-	u8 i2c_cec_addr;
 	u8 i2c_pktmem_addr;
+	u8 i2c_cec_addr;
+
+	struct i2c_client *i2c_cec;
+	u8   cec_addr[ADV7511_MAX_ADDRS];
+	u8   cec_valid_addrs;
+	bool cec_enabled_adap;
+
 	/* Is the adv7511 powered on? */
 	bool power_on;
 	/* Did we receive hotplug and rx-sense signals? */
 	bool have_monitor;
+	bool enabled_irq;
 	/* timings from s_dv_timings */
 	struct v4l2_dv_timings dv_timings;
 	u32 fmt_code;
@@ -225,7 +235,7 @@ static int adv_smbus_read_i2c_block_data(struct i2c_client *client,
 	return ret;
 }
 
-static inline void adv7511_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf)
+static void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
 	int i;
@@ -240,6 +250,34 @@ static inline void adv7511_edid_rd(struct v4l2_subdev *sd, u16 len, u8 *buf)
 		v4l2_err(sd, "%s: i2c read error\n", __func__);
 }
 
+static inline int adv7511_cec_read(struct v4l2_subdev *sd, u8 reg)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	return i2c_smbus_read_byte_data(state->i2c_cec, reg);
+}
+
+static int adv7511_cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	int ret;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		ret = i2c_smbus_write_byte_data(state->i2c_cec, reg, val);
+		if (ret == 0)
+			return 0;
+	}
+	v4l2_err(sd, "%s: I2C Write Problem\n", __func__);
+	return ret;
+}
+
+static inline int adv7511_cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask,
+				   u8 val)
+{
+	return adv7511_cec_write(sd, reg, (adv7511_cec_read(sd, reg) & mask) | val);
+}
+
 static int adv7511_pktmem_rd(struct v4l2_subdev *sd, u8 reg)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
@@ -413,16 +451,28 @@ static const struct v4l2_ctrl_ops adv7511_ctrl_ops = {
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static void adv7511_inv_register(struct v4l2_subdev *sd)
 {
+	struct adv7511_state *state = get_adv7511_state(sd);
+
 	v4l2_info(sd, "0x000-0x0ff: Main Map\n");
+	if (state->i2c_cec)
+		v4l2_info(sd, "0x100-0x1ff: CEC Map\n");
 }
 
 static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
 {
+	struct adv7511_state *state = get_adv7511_state(sd);
+
 	reg->size = 1;
 	switch (reg->reg >> 8) {
 	case 0:
 		reg->val = adv7511_rd(sd, reg->reg & 0xff);
 		break;
+	case 1:
+		if (state->i2c_cec) {
+			reg->val = adv7511_cec_read(sd, reg->reg & 0xff);
+			break;
+		}
+		/* fall through */
 	default:
 		v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
 		adv7511_inv_register(sd);
@@ -433,10 +483,18 @@ static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *
 
 static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
 {
+	struct adv7511_state *state = get_adv7511_state(sd);
+
 	switch (reg->reg >> 8) {
 	case 0:
 		adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff);
 		break;
+	case 1:
+		if (state->i2c_cec) {
+			adv7511_cec_write(sd, reg->reg & 0xff, reg->val & 0xff);
+			break;
+		}
+		/* fall through */
 	default:
 		v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
 		adv7511_inv_register(sd);
@@ -524,6 +582,7 @@ static int adv7511_log_status(struct v4l2_subdev *sd)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
 	struct adv7511_state_edid *edid = &state->edid;
+	int i;
 
 	static const char * const states[] = {
 		"in reset",
@@ -593,7 +652,23 @@ static int adv7511_log_status(struct v4l2_subdev *sd)
 	else
 		v4l2_info(sd, "no timings set\n");
 	v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr);
+
+	if (state->i2c_cec == NULL)
+		return 0;
+
 	v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr);
+
+	v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
+			"enabled" : "disabled");
+	if (state->cec_enabled_adap) {
+		for (i = 0; i < ADV7511_MAX_ADDRS; i++) {
+			bool is_valid = state->cec_valid_addrs & (1 << i);
+
+			if (is_valid)
+				v4l2_info(sd, "CEC Logical Address: 0x%x\n",
+					  state->cec_addr[i]);
+		}
+	}
 	v4l2_info(sd, "i2c pktmem addr: 0x%x\n", state->i2c_pktmem_addr);
 	return 0;
 }
@@ -651,15 +726,138 @@ static int adv7511_s_power(struct v4l2_subdev *sd, int on)
 	return true;
 }
 
+static unsigned adv7511_cec_available_log_addrs(struct v4l2_subdev *sd)
+{
+	return ADV7511_MAX_ADDRS;
+}
+
+static int adv7511_cec_enable(struct v4l2_subdev *sd, bool enable)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+
+	if (state->i2c_cec == NULL)
+		return -EIO;
+
+	if (!state->cec_enabled_adap && enable) {
+		/* power up cec section */
+		adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x01);
+		/* legacy mode and clear all rx buffers */
+		adv7511_cec_write(sd, 0x4a, 0x07);
+		adv7511_cec_write(sd, 0x4a, 0);
+		adv7511_cec_write_and_or(sd, 0x11, 0xfe, 0); /* initially disable tx */
+		/* enabled irqs: */
+		/* tx: ready */
+		/* tx: arbitration lost */
+		/* tx: retry timeout */
+		/* rx: ready 1 */
+		if (state->enabled_irq)
+			adv7511_wr_and_or(sd, 0x95, 0xc0, 0x39);
+	} else if (state->cec_enabled_adap && !enable) {
+		if (state->enabled_irq)
+			adv7511_wr_and_or(sd, 0x95, 0xc0, 0x00);
+		/* disable address mask 1-3 */
+		adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0x00);
+		/* power down cec section */
+		adv7511_cec_write_and_or(sd, 0x4e, 0xfc, 0x00);
+		state->cec_valid_addrs = 0;
+	}
+	state->cec_enabled_adap = enable;
+	return 0;
+}
+
+static int adv7511_cec_log_addr(struct v4l2_subdev *sd, u8 addr)
+{
+	struct adv7511_state *state = get_adv7511_state(sd);
+	unsigned i, free_idx = ADV7511_MAX_ADDRS;
+
+	if (!state->cec_enabled_adap)
+		return -EIO;
+
+	if (addr == CEC_LOG_ADDR_INVALID) {
+		adv7511_cec_write_and_or(sd, 0x4b, 0x8f, 0);
+		state->cec_valid_addrs = 0;
+		return 0;
+	}
+
+	for (i = 0; i < ADV7511_MAX_ADDRS; i++) {
+		bool is_valid = state->cec_valid_addrs & (1 << i);
+
+		if (free_idx == ADV7511_MAX_ADDRS && !is_valid)
+			free_idx = i;
+		if (is_valid && state->cec_addr[i] == addr)
+			return 0;
+	}
+	if (i == ADV7511_MAX_ADDRS) {
+		i = free_idx;
+		if (i == ADV7511_MAX_ADDRS)
+			return -ENXIO;
+	}
+	state->cec_addr[i] = addr;
+	state->cec_valid_addrs |= 1 << i;
+
+	switch (i) {
+	case 0:
+		/* enable address mask 0 */
+		adv7511_cec_write_and_or(sd, 0x4b, 0xef, 0x10);
+		/* set address for mask 0 */
+		adv7511_cec_write_and_or(sd, 0x4c, 0xf0, addr);
+		break;
+	case 1:
+		/* enable address mask 1 */
+		adv7511_cec_write_and_or(sd, 0x4b, 0xdf, 0x20);
+		/* set address for mask 1 */
+		adv7511_cec_write_and_or(sd, 0x4c, 0x0f, addr << 4);
+		break;
+	case 2:
+		/* enable address mask 2 */
+		adv7511_cec_write_and_or(sd, 0x4b, 0xbf, 0x40);
+		/* set address for mask 1 */
+		adv7511_cec_write_and_or(sd, 0x4d, 0xf0, addr);
+		break;
+	}
+	return 0;
+}
+
+static int adv7511_cec_transmit(struct v4l2_subdev *sd, u32 timeout_ms, struct cec_msg *msg)
+{
+	u8 len = msg->len;
+	unsigned i;
+
+	v4l2_dbg(1, debug, sd, "%s: len %d\n", __func__, len);
+
+	if (len > 16) {
+		v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
+		return -EINVAL;
+	}
+
+	/* blocking, clear cec tx irq status */
+	adv7511_wr_and_or(sd, 0x97, 0xc7, 0x38);
+
+	/* write data */
+	for (i = 0; i < len; i++)
+		adv7511_cec_write(sd, i, msg->msg[i]);
+
+	/* set length (data + header) */
+	adv7511_cec_write(sd, 0x10, len);
+	/* start transmit, enable tx */
+	adv7511_cec_write(sd, 0x11, 0x01);
+	return 0;
+}
+
 /* Enable interrupts */
 static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
 {
+	struct adv7511_state *state = get_adv7511_state(sd);
 	u8 irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT;
 	u8 irqs_rd;
 	int retries = 100;
 
 	v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable");
 
+	if (state->enabled_irq == enable)
+		return;
+	state->enabled_irq = enable;
+
 	/* The datasheet says that the EDID ready interrupt should be
 	   disabled if there is no hotplug. */
 	if (!enable)
@@ -667,6 +865,9 @@ static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
 	else if (adv7511_have_hotplug(sd))
 		irqs |= MASK_ADV7511_EDID_RDY_INT;
 
+	if (state->cec_enabled_adap)
+		adv7511_wr_and_or(sd, 0x95, 0xc0, enable ? 0x39 : 0x00);
+
 	/*
 	 * This i2c write can fail (approx. 1 in 1000 writes). But it
 	 * is essential that this register is correct, so retry it
@@ -685,24 +886,82 @@ static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable)
 	v4l2_err(sd, "Could not set interrupts: hw failure?\n");
 }
 
+static void adv_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
+{
+	if ((adv7511_cec_read(sd, 0x11) & 0x01) == 0) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
+		return;
+	}
+
+	if (tx_raw_status & 0x10) {
+		v4l2_dbg(1, debug, sd,
+			 "%s: tx raw: arbitration lost\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_ARB_LOST);
+		return;
+	}
+	if (tx_raw_status & 0x08) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_RETRY_TIMEOUT);
+		return;
+	}
+	if (tx_raw_status & 0x20) {
+		v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE,
+				   (void *)CEC_TX_STATUS_OK);
+		return;
+	}
+}
+
 /* Interrupt handler */
 static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
 {
 	u8 irq_status;
+	u8 cec_irq;
 
 	/* disable interrupts to prevent a race condition */
 	adv7511_set_isr(sd, false);
 	irq_status = adv7511_rd(sd, 0x96);
+	cec_irq = adv7511_rd(sd, 0x97);
 	/* clear detected interrupts */
 	adv7511_wr(sd, 0x96, irq_status);
+	adv7511_wr(sd, 0x97, cec_irq);
 
-	v4l2_dbg(1, debug, sd, "%s: irq 0x%x\n", __func__, irq_status);
+	v4l2_dbg(1, debug, sd, "%s: irq 0x%x, cec-irq 0x%x\n", __func__,
+		 irq_status, cec_irq);
 
 	if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT))
 		adv7511_check_monitor_present_status(sd);
 	if (irq_status & MASK_ADV7511_EDID_RDY_INT)
 		adv7511_check_edid_status(sd);
 
+	if (cec_irq & 0x38)
+		adv_cec_tx_raw_status(sd, cec_irq);
+
+	if (cec_irq & 1) {
+		struct cec_msg msg;
+
+		msg.len = adv7511_cec_read(sd, 0x25) & 0x1f;
+
+		v4l2_dbg(1, debug, sd, "%s: cec msg len %d\n", __func__,
+			 msg.len);
+
+		if (msg.len > 16)
+			msg.len = 16;
+
+		if (msg.len) {
+			u8 i;
+
+			for (i = 0; i < msg.len; i++)
+				msg.msg[i] = adv7511_cec_read(sd, i + 0x15);
+
+			adv7511_cec_write(sd, 0x4a, 1); /* toggle to re-enable rx 1 */
+			adv7511_cec_write(sd, 0x4a, 0);
+			v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_RX_MSG, &msg);
+		}
+	}
+
 	/* enable interrupts */
 	adv7511_set_isr(sd, true);
 
@@ -806,6 +1065,10 @@ static const struct v4l2_subdev_video_ops adv7511_video_ops = {
 	.s_stream = adv7511_s_stream,
 	.s_dv_timings = adv7511_s_dv_timings,
 	.g_dv_timings = adv7511_g_dv_timings,
+	.cec_available_log_addrs = adv7511_cec_available_log_addrs,
+	.cec_enable = adv7511_cec_enable,
+	.cec_log_addr = adv7511_cec_log_addr,
+	.cec_transmit = adv7511_cec_transmit,
 };
 
 /* ------------------------------ AUDIO OPS ------------------------------ */
@@ -1193,6 +1456,7 @@ static void adv7511_edid_handler(struct work_struct *work)
 	/* We failed to read the EDID, so send an event for this. */
 	ed.present = false;
 	ed.segment = adv7511_rd(sd, 0xc4);
+	ed.phys_addr = 0xffff;
 	v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed);
 	v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__);
 }
@@ -1333,10 +1597,36 @@ static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment)
 	return !memcmp(data, hdmi_header, sizeof(hdmi_header));
 }
 
+static int get_edid_spa_location(const u8 *edid)
+{
+	u8 d;
+
+	if (edid[0x7e] != 1 || edid[0x80] != 0x02 || edid[0x81] != 0x03)
+		return -1;
+
+	/* search Vendor Specific Data Block (tag 3) */
+	d = edid[0x82] & 0x7f;
+	if (d > 4) {
+		int i = 0x84;
+		int end = 0x80 + d;
+
+		do {
+			u8 tag = edid[i] >> 5;
+			u8 len = edid[i] & 0x1f;
+
+			if (tag == 3 && len >= 5)
+				return i + 4;
+			i += len + 1;
+		} while (i < end);
+	}
+	return -1;
+}
+
 static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
 	u8 edidRdy = adv7511_rd(sd, 0xc5);
+	int offset;
 
 	v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n",
 			 __func__, EDID_MAX_RETRIES - state->edid.read_retries);
@@ -1382,6 +1672,12 @@ static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
 
 		v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments);
 		state->edid.complete = true;
+		offset = get_edid_spa_location(state->edid.data);
+		if (offset > 0)
+			ed.phys_addr = (state->edid.data[offset] << 8) |
+					state->edid.data[offset + 1];
+		else
+			ed.phys_addr = 0xffff;
 
 		/* report when we have all segments
 		   but report only for segment 0
@@ -1403,11 +1699,14 @@ static void adv7511_init_setup(struct v4l2_subdev *sd)
 {
 	struct adv7511_state *state = get_adv7511_state(sd);
 	struct adv7511_state_edid *edid = &state->edid;
+	u32 cec_clk = state->pdata.cec_clk;
+	u8 ratio;
 
 	v4l2_dbg(1, debug, sd, "%s\n", __func__);
 
 	/* clear all interrupts */
 	adv7511_wr(sd, 0x96, 0xff);
+	adv7511_wr(sd, 0x97, 0xff);
 	/*
 	 * Stop HPD from resetting a lot of registers.
 	 * It might leave the chip in a partly un-initialized state,
@@ -1419,6 +1718,25 @@ static void adv7511_init_setup(struct v4l2_subdev *sd)
 	adv7511_set_isr(sd, false);
 	adv7511_s_stream(sd, false);
 	adv7511_s_audio_stream(sd, false);
+
+	if (state->i2c_cec == NULL)
+		return;
+
+	v4l2_dbg(1, debug, sd, "%s: cec_clk %d\n", __func__, cec_clk);
+
+	/* cec soft reset */
+	adv7511_cec_write(sd, 0x50, 0x01);
+	adv7511_cec_write(sd, 0x50, 0x00);
+
+	/* legacy mode */
+	adv7511_cec_write(sd, 0x4a, 0x00);
+
+	if (cec_clk % 750000 != 0)
+		v4l2_err(sd, "%s: cec_clk %d, not multiple of 750 Khz\n",
+			 __func__, cec_clk);
+
+	ratio = (cec_clk / 750000) - 1;
+	adv7511_cec_write(sd, 0x4e, ratio << 2);
 }
 
 static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id)
@@ -1495,26 +1813,47 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *
 	chip_id[0] = adv7511_rd(sd, 0xf5);
 	chip_id[1] = adv7511_rd(sd, 0xf6);
 	if (chip_id[0] != 0x75 || chip_id[1] != 0x11) {
-		v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], chip_id[1]);
+		v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0],
+			 chip_id[1]);
 		err = -EIO;
 		goto err_entity;
 	}
 
-	state->i2c_edid = i2c_new_dummy(client->adapter, state->i2c_edid_addr >> 1);
+	state->i2c_edid = i2c_new_dummy(client->adapter,
+					state->i2c_edid_addr >> 1);
 	if (state->i2c_edid == NULL) {
 		v4l2_err(sd, "failed to register edid i2c client\n");
 		err = -ENOMEM;
 		goto err_entity;
 	}
 
+	adv7511_wr(sd, 0xe1, state->i2c_cec_addr);
+	if (state->pdata.cec_clk < 3000000 ||
+	    state->pdata.cec_clk > 100000000) {
+		v4l2_err(sd, "%s: cec_clk %u outside range, disabling cec\n",
+				__func__, state->pdata.cec_clk);
+		state->pdata.cec_clk = 0;
+	}
+
+	if (state->pdata.cec_clk) {
+		state->i2c_cec = i2c_new_dummy(client->adapter,
+					       state->i2c_cec_addr >> 1);
+		if (state->i2c_cec == NULL) {
+			v4l2_err(sd, "failed to register cec i2c client\n");
+			goto err_unreg_edid;
+		}
+		adv7511_wr(sd, 0xe2, 0x00); /* power up cec section */
+	} else {
+		adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */
+	}
+
 	state->i2c_pktmem = i2c_new_dummy(client->adapter, state->i2c_pktmem_addr >> 1);
 	if (state->i2c_pktmem == NULL) {
 		v4l2_err(sd, "failed to register pktmem i2c client\n");
 		err = -ENOMEM;
-		goto err_unreg_edid;
+		goto err_unreg_cec;
 	}
 
-	adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */
 	state->work_queue = create_singlethread_workqueue(sd->name);
 	if (state->work_queue == NULL) {
 		v4l2_err(sd, "could not create workqueue\n");
@@ -1534,6 +1873,9 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *
 
 err_unreg_pktmem:
 	i2c_unregister_device(state->i2c_pktmem);
+err_unreg_cec:
+	if (state->i2c_cec)
+		i2c_unregister_device(state->i2c_cec);
 err_unreg_edid:
 	i2c_unregister_device(state->i2c_edid);
 err_entity:
@@ -1555,9 +1897,12 @@ static int adv7511_remove(struct i2c_client *client)
 	v4l2_dbg(1, debug, sd, "%s removed @ 0x%x (%s)\n", client->name,
 		 client->addr << 1, client->adapter->name);
 
+	adv7511_set_isr(sd, false);
 	adv7511_init_setup(sd);
 	cancel_delayed_work(&state->edid_handler);
 	i2c_unregister_device(state->i2c_edid);
+	if (state->i2c_cec)
+		i2c_unregister_device(state->i2c_cec);
 	i2c_unregister_device(state->i2c_pktmem);
 	destroy_workqueue(state->work_queue);
 	v4l2_device_unregister_subdev(sd);
diff --git a/include/media/adv7511.h b/include/media/adv7511.h
index d83b91d..61c3d71 100644
--- a/include/media/adv7511.h
+++ b/include/media/adv7511.h
@@ -32,11 +32,7 @@ struct adv7511_monitor_detect {
 struct adv7511_edid_detect {
 	int present;
 	int segment;
-};
-
-struct adv7511_cec_arg {
-	void *arg;
-	u32 f_flags;
+	uint16_t phys_addr;
 };
 
 struct adv7511_platform_data {
-- 
2.1.4

[PATCHv8 14/15] cec: s5p-cec: Add s5p-cec driver

[Hans Verkuil]

From: Kamil Debski <kamil@wypas.org>

Add CEC interface driver present in the Samsung Exynos range of
SoCs.

The following files were based on work by SangPil Moon:
- exynos_hdmi_cec.h
- exynos_hdmi_cecctl.c

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 .../devicetree/bindings/media/s5p-cec.txt          |  31 +++
 drivers/media/platform/Kconfig                     |  10 +
 drivers/media/platform/Makefile                    |   1 +
 drivers/media/platform/s5p-cec/Makefile            |   2 +
 drivers/media/platform/s5p-cec/exynos_hdmi_cec.h   |  37 +++
 .../media/platform/s5p-cec/exynos_hdmi_cecctrl.c   | 208 ++++++++++++++++
 drivers/media/platform/s5p-cec/regs-cec.h          |  96 +++++++
 drivers/media/platform/s5p-cec/s5p_cec.c           | 277 +++++++++++++++++++++
 drivers/media/platform/s5p-cec/s5p_cec.h           |  76 ++++++
 9 files changed, 738 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/s5p-cec.txt
 create mode 100644 drivers/media/platform/s5p-cec/Makefile
 create mode 100644 drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
 create mode 100644 drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
 create mode 100644 drivers/media/platform/s5p-cec/regs-cec.h
 create mode 100644 drivers/media/platform/s5p-cec/s5p_cec.c
 create mode 100644 drivers/media/platform/s5p-cec/s5p_cec.h

diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
new file mode 100644
index 0000000..925ab4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/s5p-cec.txt
@@ -0,0 +1,31 @@
+* Samsung HDMI CEC driver
+
+The HDMI CEC module is present is Samsung SoCs and its purpose is to
+handle communication between HDMI connected devices over the CEC bus.
+
+Required properties:
+  - compatible : value should be following
+	"samsung,s5p-cec"
+
+  - reg : Physical base address of the IP registers and length of memory
+	  mapped region.
+
+  - interrupts : HDMI CEC interrupt number to the CPU.
+  - clocks : from common clock binding: handle to HDMI CEC clock.
+  - clock-names : from common clock binding: must contain "hdmicec",
+		  corresponding to entry in the clocks property.
+  - samsung,syscon-phandle - phandle to the PMU system controller
+
+Example:
+
+hdmicec: cec@100B0000 {
+	compatible = "samsung,s5p-cec";
+	reg = <0x100B0000 0x200>;
+	interrupts = <0 114 0>;
+	clocks = <&clock CLK_HDMI_CEC>;
+	clock-names = "hdmicec";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index dc75694..c5828de 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -157,6 +157,16 @@ config VIDEO_MEM2MEM_DEINTERLACE
 	help
 	    Generic deinterlacing V4L2 driver.
 
+config VIDEO_SAMSUNG_S5P_CEC
+	tristate "Samsung S5P CEC driver"
+	depends on CEC && VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
+	default n
+	---help---
+	  This is a driver for Samsung S5P HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
 config VIDEO_SAMSUNG_S5P_G2D
 	tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
 	depends on VIDEO_DEV && VIDEO_V4L2
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index efa0295..957af5f 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE)	+= m2m-deinterlace.o
 
 obj-$(CONFIG_VIDEO_S3C_CAMIF) 		+= s3c-camif/
 obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS) 	+= exynos4-is/
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC)	+= s5p-cec/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG)	+= s5p-jpeg/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC)	+= s5p-mfc/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV)	+= s5p-tv/
diff --git a/drivers/media/platform/s5p-cec/Makefile b/drivers/media/platform/s5p-cec/Makefile
new file mode 100644
index 0000000..0e2cf45
--- /dev/null
+++ b/drivers/media/platform/s5p-cec/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC)	+= s5p-cec.o
+s5p-cec-y += s5p_cec.o exynos_hdmi_cecctrl.o
diff --git a/drivers/media/platform/s5p-cec/exynos_hdmi_cec.h b/drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
new file mode 100644
index 0000000..d008695
--- /dev/null
+++ b/drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
@@ -0,0 +1,37 @@
+/* drivers/media/platform/s5p-cec/exynos_hdmi_cec.h
+ *
+ * Copyright (c) 2010, 2014 Samsung Electronics
+ *		http://www.samsung.com/
+ *
+ * Header file for interface of Samsung Exynos hdmi cec hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EXYNOS_HDMI_CEC_H_
+#define _EXYNOS_HDMI_CEC_H_ __FILE__
+
+#include <linux/regmap.h>
+#include <linux/miscdevice.h>
+#include "s5p_cec.h"
+
+void s5p_cec_set_divider(struct s5p_cec_dev *cec);
+void s5p_cec_enable_rx(struct s5p_cec_dev *cec);
+void s5p_cec_mask_rx_interrupts(struct s5p_cec_dev *cec);
+void s5p_cec_unmask_rx_interrupts(struct s5p_cec_dev *cec);
+void s5p_cec_mask_tx_interrupts(struct s5p_cec_dev *cec);
+void s5p_cec_unmask_tx_interrupts(struct s5p_cec_dev *cec);
+void s5p_cec_reset(struct s5p_cec_dev *cec);
+void s5p_cec_tx_reset(struct s5p_cec_dev *cec);
+void s5p_cec_rx_reset(struct s5p_cec_dev *cec);
+void s5p_cec_threshold(struct s5p_cec_dev *cec);
+void s5p_cec_copy_packet(struct s5p_cec_dev *cec, char *data, size_t count);
+void s5p_cec_set_addr(struct s5p_cec_dev *cec, u32 addr);
+u32 s5p_cec_get_status(struct s5p_cec_dev *cec);
+void s5p_clr_pending_tx(struct s5p_cec_dev *cec);
+void s5p_clr_pending_rx(struct s5p_cec_dev *cec);
+void s5p_cec_get_rx_buf(struct s5p_cec_dev *cec, u32 size, u8 *buffer);
+
+#endif /* _EXYNOS_HDMI_CEC_H_ */
diff --git a/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c b/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
new file mode 100644
index 0000000..134e50b
--- /dev/null
+++ b/drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
@@ -0,0 +1,208 @@
+/* drivers/media/platform/s5p-cec/exynos_hdmi_cecctrl.c
+ *
+ * Copyright (c) 2009, 2014 Samsung Electronics
+ *		http://www.samsung.com/
+ *
+ * cec ftn file for Samsung TVOUT driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/device.h>
+
+#include "exynos_hdmi_cec.h"
+#include "regs-cec.h"
+
+#define S5P_HDMI_FIN			24000000
+#define CEC_DIV_RATIO			320000
+
+#define CEC_MESSAGE_BROADCAST_MASK	0x0F
+#define CEC_MESSAGE_BROADCAST		0x0F
+#define CEC_FILTER_THRESHOLD		0x15
+
+void s5p_cec_set_divider(struct s5p_cec_dev *cec)
+{
+	u32 div_ratio, div_val;
+	unsigned int reg;
+
+	div_ratio  = S5P_HDMI_FIN / CEC_DIV_RATIO - 1;
+
+	if (regmap_read(cec->pmu, EXYNOS_HDMI_PHY_CONTROL, &reg)) {
+		dev_err(cec->dev, "failed to read phy control\n");
+		return;
+	}
+
+	reg = (reg & ~(0x3FF << 16)) | (div_ratio << 16);
+
+	if (regmap_write(cec->pmu, EXYNOS_HDMI_PHY_CONTROL, reg)) {
+		dev_err(cec->dev, "failed to write phy control\n");
+		return;
+	}
+
+	div_val = CEC_DIV_RATIO * 0.00005 - 1;
+
+	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_3);
+	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_2);
+	writeb(0x0, cec->reg + S5P_CEC_DIVISOR_1);
+	writeb(div_val, cec->reg + S5P_CEC_DIVISOR_0);
+}
+
+void s5p_cec_enable_rx(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_RX_CTRL);
+	reg |= S5P_CEC_RX_CTRL_ENABLE;
+	writeb(reg, cec->reg + S5P_CEC_RX_CTRL);
+}
+
+void s5p_cec_mask_rx_interrupts(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
+	reg |= S5P_CEC_IRQ_RX_DONE;
+	reg |= S5P_CEC_IRQ_RX_ERROR;
+	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
+}
+
+void s5p_cec_unmask_rx_interrupts(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
+	reg &= ~S5P_CEC_IRQ_RX_DONE;
+	reg &= ~S5P_CEC_IRQ_RX_ERROR;
+	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
+}
+
+void s5p_cec_mask_tx_interrupts(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
+	reg |= S5P_CEC_IRQ_TX_DONE;
+	reg |= S5P_CEC_IRQ_TX_ERROR;
+	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
+
+}
+
+void s5p_cec_unmask_tx_interrupts(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	reg = readb(cec->reg + S5P_CEC_IRQ_MASK);
+	reg &= ~S5P_CEC_IRQ_TX_DONE;
+	reg &= ~S5P_CEC_IRQ_TX_ERROR;
+	writeb(reg, cec->reg + S5P_CEC_IRQ_MASK);
+}
+
+void s5p_cec_reset(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	writeb(S5P_CEC_RX_CTRL_RESET, cec->reg + S5P_CEC_RX_CTRL);
+	writeb(S5P_CEC_TX_CTRL_RESET, cec->reg + S5P_CEC_TX_CTRL);
+
+	reg = readb(cec->reg + 0xc4);
+	reg &= ~0x1;
+	writeb(reg, cec->reg + 0xc4);
+}
+
+void s5p_cec_tx_reset(struct s5p_cec_dev *cec)
+{
+	writeb(S5P_CEC_TX_CTRL_RESET, cec->reg + S5P_CEC_TX_CTRL);
+}
+
+void s5p_cec_rx_reset(struct s5p_cec_dev *cec)
+{
+	u8 reg;
+
+	writeb(S5P_CEC_RX_CTRL_RESET, cec->reg + S5P_CEC_RX_CTRL);
+
+	reg = readb(cec->reg + 0xc4);
+	reg &= ~0x1;
+	writeb(reg, cec->reg + 0xc4);
+}
+
+void s5p_cec_threshold(struct s5p_cec_dev *cec)
+{
+	writeb(CEC_FILTER_THRESHOLD, cec->reg + S5P_CEC_RX_FILTER_TH);
+	writeb(0, cec->reg + S5P_CEC_RX_FILTER_CTRL);
+}
+
+void s5p_cec_copy_packet(struct s5p_cec_dev *cec, char *data, size_t count)
+{
+	char debug[40];
+	int i = 0;
+	u8 reg;
+
+	while (i < count) {
+		writeb(data[i], cec->reg + (S5P_CEC_TX_BUFF0 + (i * 4)));
+		sprintf(debug + i * 2, "%02x ", data[i]);
+		i++;
+	}
+
+	writeb(count, cec->reg + S5P_CEC_TX_BYTES);
+	reg = readb(cec->reg + S5P_CEC_TX_CTRL);
+	reg |= S5P_CEC_TX_CTRL_START;
+
+	if ((data[0] & CEC_MESSAGE_BROADCAST_MASK) == CEC_MESSAGE_BROADCAST) {
+		dev_dbg(cec->dev, "Broadcast");
+		reg |= S5P_CEC_TX_CTRL_BCAST;
+	} else {
+		dev_dbg(cec->dev, "No Broadcast");
+		reg &= ~S5P_CEC_TX_CTRL_BCAST;
+	}
+
+	reg |= 0x50;
+	writeb(reg, cec->reg + S5P_CEC_TX_CTRL);
+	dev_dbg(cec->dev, "cec-tx: cec count(%d): %s", count, debug);
+}
+
+void s5p_cec_set_addr(struct s5p_cec_dev *cec, u32 addr)
+{
+	writeb(addr & 0x0F, cec->reg + S5P_CEC_LOGIC_ADDR);
+}
+
+u32 s5p_cec_get_status(struct s5p_cec_dev *cec)
+{
+	u32 status = 0;
+
+	status = readb(cec->reg + S5P_CEC_STATUS_0);
+	status |= readb(cec->reg + S5P_CEC_STATUS_1) << 8;
+	status |= readb(cec->reg + S5P_CEC_STATUS_2) << 16;
+	status |= readb(cec->reg + S5P_CEC_STATUS_3) << 24;
+
+	dev_dbg(cec->dev, "status = 0x%x!\n", status);
+
+	return status;
+}
+
+void s5p_clr_pending_tx(struct s5p_cec_dev *cec)
+{
+	writeb(S5P_CEC_IRQ_TX_DONE | S5P_CEC_IRQ_TX_ERROR,
+					cec->reg + S5P_CEC_IRQ_CLEAR);
+}
+
+void s5p_clr_pending_rx(struct s5p_cec_dev *cec)
+{
+	writeb(S5P_CEC_IRQ_RX_DONE | S5P_CEC_IRQ_RX_ERROR,
+					cec->reg + S5P_CEC_IRQ_CLEAR);
+}
+
+void s5p_cec_get_rx_buf(struct s5p_cec_dev *cec, u32 size, u8 *buffer)
+{
+	u32 i = 0;
+	char debug[40];
+
+	while (i < size) {
+		buffer[i] = readb(cec->reg + S5P_CEC_RX_BUFF0 + (i * 4));
+		sprintf(debug + i * 2, "%02x ", buffer[i]);
+		i++;
+	}
+	dev_dbg(cec->dev, "cec-rx: cec size(%d): %s", size, debug);
+}
diff --git a/drivers/media/platform/s5p-cec/regs-cec.h b/drivers/media/platform/s5p-cec/regs-cec.h
new file mode 100644
index 0000000..b2e7e12
--- /dev/null
+++ b/drivers/media/platform/s5p-cec/regs-cec.h
@@ -0,0 +1,96 @@
+/* drivers/media/platform/s5p-cec/regs-cec.h
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *		http://www.samsung.com/
+ *
+ *  register header file for Samsung TVOUT driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __EXYNOS_REGS__H
+#define __EXYNOS_REGS__H
+
+/*
+ * Register part
+ */
+#define S5P_CEC_STATUS_0			(0x0000)
+#define S5P_CEC_STATUS_1			(0x0004)
+#define S5P_CEC_STATUS_2			(0x0008)
+#define S5P_CEC_STATUS_3			(0x000C)
+#define S5P_CEC_IRQ_MASK			(0x0010)
+#define S5P_CEC_IRQ_CLEAR			(0x0014)
+#define S5P_CEC_LOGIC_ADDR			(0x0020)
+#define S5P_CEC_DIVISOR_0			(0x0030)
+#define S5P_CEC_DIVISOR_1			(0x0034)
+#define S5P_CEC_DIVISOR_2			(0x0038)
+#define S5P_CEC_DIVISOR_3			(0x003C)
+
+#define S5P_CEC_TX_CTRL				(0x0040)
+#define S5P_CEC_TX_BYTES			(0x0044)
+#define S5P_CEC_TX_STAT0			(0x0060)
+#define S5P_CEC_TX_STAT1			(0x0064)
+#define S5P_CEC_TX_BUFF0			(0x0080)
+#define S5P_CEC_TX_BUFF1			(0x0084)
+#define S5P_CEC_TX_BUFF2			(0x0088)
+#define S5P_CEC_TX_BUFF3			(0x008C)
+#define S5P_CEC_TX_BUFF4			(0x0090)
+#define S5P_CEC_TX_BUFF5			(0x0094)
+#define S5P_CEC_TX_BUFF6			(0x0098)
+#define S5P_CEC_TX_BUFF7			(0x009C)
+#define S5P_CEC_TX_BUFF8			(0x00A0)
+#define S5P_CEC_TX_BUFF9			(0x00A4)
+#define S5P_CEC_TX_BUFF10			(0x00A8)
+#define S5P_CEC_TX_BUFF11			(0x00AC)
+#define S5P_CEC_TX_BUFF12			(0x00B0)
+#define S5P_CEC_TX_BUFF13			(0x00B4)
+#define S5P_CEC_TX_BUFF14			(0x00B8)
+#define S5P_CEC_TX_BUFF15			(0x00BC)
+
+#define S5P_CEC_RX_CTRL				(0x00C0)
+#define S5P_CEC_RX_STAT0			(0x00E0)
+#define S5P_CEC_RX_STAT1			(0x00E4)
+#define S5P_CEC_RX_BUFF0			(0x0100)
+#define S5P_CEC_RX_BUFF1			(0x0104)
+#define S5P_CEC_RX_BUFF2			(0x0108)
+#define S5P_CEC_RX_BUFF3			(0x010C)
+#define S5P_CEC_RX_BUFF4			(0x0110)
+#define S5P_CEC_RX_BUFF5			(0x0114)
+#define S5P_CEC_RX_BUFF6			(0x0118)
+#define S5P_CEC_RX_BUFF7			(0x011C)
+#define S5P_CEC_RX_BUFF8			(0x0120)
+#define S5P_CEC_RX_BUFF9			(0x0124)
+#define S5P_CEC_RX_BUFF10			(0x0128)
+#define S5P_CEC_RX_BUFF11			(0x012C)
+#define S5P_CEC_RX_BUFF12			(0x0130)
+#define S5P_CEC_RX_BUFF13			(0x0134)
+#define S5P_CEC_RX_BUFF14			(0x0138)
+#define S5P_CEC_RX_BUFF15			(0x013C)
+
+#define S5P_CEC_RX_FILTER_CTRL			(0x0180)
+#define S5P_CEC_RX_FILTER_TH			(0x0184)
+
+/*
+ * Bit definition part
+ */
+#define S5P_CEC_IRQ_TX_DONE			(1<<0)
+#define S5P_CEC_IRQ_TX_ERROR			(1<<1)
+#define S5P_CEC_IRQ_RX_DONE			(1<<4)
+#define S5P_CEC_IRQ_RX_ERROR			(1<<5)
+
+#define S5P_CEC_TX_CTRL_START			(1<<0)
+#define S5P_CEC_TX_CTRL_BCAST			(1<<1)
+#define S5P_CEC_TX_CTRL_RETRY			(0x04<<4)
+#define S5P_CEC_TX_CTRL_RESET			(1<<7)
+
+#define S5P_CEC_RX_CTRL_ENABLE			(1<<0)
+#define S5P_CEC_RX_CTRL_RESET			(1<<7)
+
+#define S5P_CEC_LOGIC_ADDR_MASK			(0xF)
+
+/* PMU Registers for PHY */
+#define EXYNOS_HDMI_PHY_CONTROL			0x700
+
+#endif	/* __EXYNOS_REGS__H	*/
diff --git a/drivers/media/platform/s5p-cec/s5p_cec.c b/drivers/media/platform/s5p-cec/s5p_cec.c
new file mode 100644
index 0000000..0bf84a7
--- /dev/null
+++ b/drivers/media/platform/s5p-cec/s5p_cec.c
@@ -0,0 +1,277 @@
+/* drivers/media/platform/s5p-cec/s5p_cec.c
+ *
+ * Samsung S5P CEC driver
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver is based on the "cec interface driver for exynos soc" by
+ * SangPil Moon.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/workqueue.h>
+#include <media/cec.h>
+
+#include "exynos_hdmi_cec.h"
+#include "regs-cec.h"
+#include "s5p_cec.h"
+
+#define CEC_NAME	"s5p-cec"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "debug level (0-2)");
+
+static int s5p_cec_enable(struct cec_adapter *adap, bool enable)
+{
+	struct s5p_cec_dev *cec = container_of(adap, struct s5p_cec_dev, adap);
+	int ret;
+
+	if (enable) {
+		ret = pm_runtime_get_sync(cec->dev);
+
+		s5p_cec_reset(cec);
+
+		s5p_cec_set_divider(cec);
+		s5p_cec_threshold(cec);
+
+		s5p_cec_unmask_tx_interrupts(cec);
+		s5p_cec_unmask_rx_interrupts(cec);
+		s5p_cec_enable_rx(cec);
+	} else {
+		s5p_cec_mask_tx_interrupts(cec);
+		s5p_cec_mask_rx_interrupts(cec);
+		pm_runtime_disable(cec->dev);
+	}
+
+	return 0;
+}
+
+static int s5p_cec_log_addr(struct cec_adapter *adap, u8 addr)
+{
+	struct s5p_cec_dev *cec = container_of(adap, struct s5p_cec_dev, adap);
+
+	s5p_cec_set_addr(cec, addr);
+	return 0;
+}
+
+static int s5p_cec_transmit(struct cec_adapter *adap, u32 timeout_ms, struct cec_msg *msg)
+{
+	struct s5p_cec_dev *cec = container_of(adap, struct s5p_cec_dev, adap);
+
+	s5p_cec_copy_packet(cec, msg->msg, msg->len);
+	return 0;
+}
+
+static irqreturn_t s5p_cec_irq_handler(int irq, void *priv)
+{
+	struct s5p_cec_dev *cec = priv;
+	u32 status = 0;
+
+	status = s5p_cec_get_status(cec);
+
+	dev_dbg(cec->dev, "irq received\n");
+
+	if (status & CEC_STATUS_TX_DONE) {
+		if (status & CEC_STATUS_TX_ERROR) {
+			dev_dbg(cec->dev, "CEC_STATUS_TX_ERROR set\n");
+			cec->tx = STATE_ERROR;
+		} else {
+			dev_dbg(cec->dev, "CEC_STATUS_TX_DONE\n");
+			cec->tx = STATE_DONE;
+		}
+		s5p_clr_pending_tx(cec);
+	}
+
+	if (status & CEC_STATUS_RX_DONE) {
+		if (status & CEC_STATUS_RX_ERROR) {
+			dev_dbg(cec->dev, "CEC_STATUS_RX_ERROR set\n");
+			s5p_cec_rx_reset(cec);
+			s5p_cec_enable_rx(cec);
+		} else {
+			dev_dbg(cec->dev, "CEC_STATUS_RX_DONE set\n");
+			if (cec->rx != STATE_IDLE)
+				dev_dbg(cec->dev, "Buffer overrun (worker did not process previous message)\n");
+			cec->rx = STATE_BUSY;
+			cec->msg.len = status >> 24;
+			cec->msg.status = CEC_RX_STATUS_READY;
+			s5p_cec_get_rx_buf(cec, cec->msg.len,
+					cec->msg.msg);
+			cec->rx = STATE_DONE;
+			s5p_cec_enable_rx(cec);
+		}
+		/* Clear interrupt pending bit */
+		s5p_clr_pending_rx(cec);
+	}
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t s5p_cec_irq_handler_thread(int irq, void *priv)
+{
+	struct s5p_cec_dev *cec = priv;
+
+	dev_dbg(cec->dev, "irq processing thread\n");
+	switch (cec->tx) {
+	case STATE_DONE:
+		cec_transmit_done(&cec->adap, CEC_TX_STATUS_OK);
+		cec->tx = STATE_IDLE;
+		break;
+	case STATE_ERROR:
+		cec_transmit_done(&cec->adap, CEC_TX_STATUS_RETRY_TIMEOUT);
+		cec->tx = STATE_IDLE;
+		break;
+	case STATE_BUSY:
+		dev_err(cec->dev, "state set to busy, this should not occur here\n");
+		break;
+	default:
+		break;
+	}
+
+	switch (cec->rx) {
+	case STATE_DONE:
+		cec_received_msg(&cec->adap, &cec->msg);
+		cec->rx = STATE_IDLE;
+	default:
+		break;
+	};
+
+	return IRQ_HANDLED;
+}
+
+static int s5p_cec_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct s5p_cec_dev *cec;
+	int ret;
+
+	cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	cec->dev = dev;
+
+	cec->irq = platform_get_irq(pdev, 0);
+	if (IS_ERR_VALUE(cec->irq))
+		return cec->irq;
+
+	ret = devm_request_threaded_irq(dev, cec->irq, s5p_cec_irq_handler,
+		s5p_cec_irq_handler_thread, 0, pdev->name, cec);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	cec->clk = devm_clk_get(dev, "hdmicec");
+	if (IS_ERR(cec->clk))
+		return PTR_ERR(cec->clk);
+
+	cec->pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
+						 "samsung,syscon-phandle");
+	if (IS_ERR(cec->pmu))
+		return -EPROBE_DEFER;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cec->reg = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cec->reg))
+		return PTR_ERR(cec->reg);
+
+	cec->adap.available_log_addrs = 1;
+	cec->adap.adap_enable = s5p_cec_enable;
+	cec->adap.adap_log_addr = s5p_cec_log_addr;
+	cec->adap.adap_transmit = s5p_cec_transmit;
+	cec_create_adapter(&cec->adap, CEC_NAME, CEC_CAP_STATE |
+		CEC_CAP_PHYS_ADDR | CEC_CAP_LOG_ADDRS | CEC_CAP_IO |
+		CEC_CAP_IS_SOURCE,
+		0, THIS_MODULE, &pdev->dev);
+
+	platform_set_drvdata(pdev, cec);
+	pm_runtime_enable(dev);
+
+	dev_dbg(dev, "successfuly probed\n");
+	return 0;
+}
+
+static int s5p_cec_remove(struct platform_device *pdev)
+{
+	struct s5p_cec_dev *cec = platform_get_drvdata(pdev);
+
+	cec_delete_adapter(&cec->adap);
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static int s5p_cec_runtime_suspend(struct device *dev)
+{
+	struct s5p_cec_dev *cec = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(cec->clk);
+	return 0;
+}
+
+static int s5p_cec_runtime_resume(struct device *dev)
+{
+	struct s5p_cec_dev *cec = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(cec->clk);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int s5p_cec_suspend(struct device *dev)
+{
+	if (pm_runtime_suspended(dev))
+		return 0;
+	return s5p_cec_runtime_suspend(dev);
+}
+
+static int s5p_cec_resume(struct device *dev)
+{
+	if (pm_runtime_suspended(dev))
+		return 0;
+	return s5p_cec_runtime_resume(dev);
+}
+
+static const struct dev_pm_ops s5p_cec_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(s5p_cec_suspend, s5p_cec_resume)
+	SET_RUNTIME_PM_OPS(s5p_cec_runtime_suspend, s5p_cec_runtime_resume,
+			   NULL)
+};
+
+static const struct of_device_id s5p_cec_match[] = {
+	{
+		.compatible	= "samsung,s5p-cec",
+	},
+	{},
+};
+
+static struct platform_driver s5p_cec_pdrv = {
+	.probe	= s5p_cec_probe,
+	.remove	= s5p_cec_remove,
+	.driver	= {
+		.name		= CEC_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= s5p_cec_match,
+		.pm		= &s5p_cec_pm_ops,
+	},
+};
+
+module_platform_driver(s5p_cec_pdrv);
+
+MODULE_AUTHOR("Kamil Debski <kamil@wypas.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Samsung S5P CEC driver");
diff --git a/drivers/media/platform/s5p-cec/s5p_cec.h b/drivers/media/platform/s5p-cec/s5p_cec.h
new file mode 100644
index 0000000..d6ffd92
--- /dev/null
+++ b/drivers/media/platform/s5p-cec/s5p_cec.h
@@ -0,0 +1,76 @@
+/* drivers/media/platform/s5p-cec/s5p_cec.h
+ *
+ * Samsung S5P HDMI CEC driver
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _S5P_CEC_H_
+#define _S5P_CEC_H_ __FILE__
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/workqueue.h>
+#include <media/cec.h>
+
+#include "exynos_hdmi_cec.h"
+#include "regs-cec.h"
+#include "s5p_cec.h"
+
+#define CEC_NAME	"s5p-cec"
+
+#define CEC_STATUS_TX_RUNNING		(1 << 0)
+#define CEC_STATUS_TX_TRANSFERRING	(1 << 1)
+#define CEC_STATUS_TX_DONE		(1 << 2)
+#define CEC_STATUS_TX_ERROR		(1 << 3)
+#define CEC_STATUS_TX_BYTES		(0xFF << 8)
+#define CEC_STATUS_RX_RUNNING		(1 << 16)
+#define CEC_STATUS_RX_RECEIVING		(1 << 17)
+#define CEC_STATUS_RX_DONE		(1 << 18)
+#define CEC_STATUS_RX_ERROR		(1 << 19)
+#define CEC_STATUS_RX_BCAST		(1 << 20)
+#define CEC_STATUS_RX_BYTES		(0xFF << 24)
+
+#define CEC_WORKER_TX_DONE		(1 << 0)
+#define CEC_WORKER_RX_MSG		(1 << 1)
+
+/* CEC Rx buffer size */
+#define CEC_RX_BUFF_SIZE		16
+/* CEC Tx buffer size */
+#define CEC_TX_BUFF_SIZE		16
+
+enum cec_state {
+	STATE_IDLE,
+	STATE_BUSY,
+	STATE_DONE,
+	STATE_ERROR
+};
+
+struct s5p_cec_dev {
+	struct cec_adapter	adap;
+	struct clk		*clk;
+	struct device		*dev;
+	struct mutex		lock;
+	struct regmap           *pmu;
+	int			irq;
+	void __iomem		*reg;
+
+	enum cec_state		rx;
+	enum cec_state		tx;
+	struct cec_msg		msg;
+};
+
+#endif /* _S5P_CEC_H_ */
-- 
2.1.4

[PATCHv8 15/15] cobalt: add cec support

[Hans Verkuil]

Add CEC support to the cobalt driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/pci/cobalt/cobalt-driver.c |  50 +++++++++++++--
 drivers/media/pci/cobalt/cobalt-driver.h |   2 +
 drivers/media/pci/cobalt/cobalt-irq.c    |   3 +
 drivers/media/pci/cobalt/cobalt-v4l2.c   | 107 +++++++++++++++++++++++++++++--
 4 files changed, 151 insertions(+), 11 deletions(-)

diff --git a/drivers/media/pci/cobalt/cobalt-driver.c b/drivers/media/pci/cobalt/cobalt-driver.c
index 8fed61e..920c9de 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.c
+++ b/drivers/media/pci/cobalt/cobalt-driver.c
@@ -76,6 +76,7 @@ static u8 edid[256] = {
 	0x0A, 0x0A, 0x0A, 0x0A, 0x00, 0x00, 0x00, 0x10,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x68,
+
 	0x02, 0x03, 0x1a, 0xc0, 0x48, 0xa2, 0x10, 0x04,
 	0x02, 0x01, 0x21, 0x14, 0x13, 0x23, 0x09, 0x07,
 	0x07, 0x65, 0x03, 0x0c, 0x00, 0x10, 0x00, 0xe2,
@@ -149,17 +150,57 @@ static void cobalt_notify(struct v4l2_subdev *sd,
 	struct cobalt *cobalt = to_cobalt(sd->v4l2_dev);
 	unsigned sd_nr = cobalt_get_sd_nr(sd);
 	struct cobalt_stream *s = &cobalt->streams[sd_nr];
-	bool hotplug = arg ? *((int *)arg) : false;
 
-	if (s->is_output)
+	switch (notification) {
+	case V4L2_SUBDEV_CEC_TX_DONE:
+		cec_transmit_done(&s->cec_adap, (unsigned long)arg);
+		return;
+	case V4L2_SUBDEV_CEC_RX_MSG:
+		cec_received_msg(&s->cec_adap, arg);
+		return;
+	case V4L2_SUBDEV_CEC_CONN_INPUTS:
+		cec_connected_inputs(&s->cec_adap, *(u16 *)arg);
+		return;
+	default:
+		break;
+	}
+
+	if (s->is_output) {
+		switch (notification) {
+		case ADV7511_EDID_DETECT: {
+			struct adv7511_edid_detect *ed = arg;
+
+			s->cec_adap.phys_addr = ed->phys_addr;
+			if (!ed->present) {
+				cec_enable(&s->cec_adap, false);
+				break;
+			}
+			cec_enable(&s->cec_adap, true);
+			break;
+		}
+		case ADV7511_MONITOR_DETECT: {
+			struct adv7511_monitor_detect *md = arg;
+
+			if (!md->present) {
+				cec_enable(&s->cec_adap, false);
+				break;
+			}
+			break;
+		}
+		}
 		return;
+	}
 
 	switch (notification) {
-	case ADV76XX_HOTPLUG:
+	case ADV76XX_HOTPLUG: {
+		bool hotplug = arg ? *((int *)arg) : false;
+
 		cobalt_s_bit_sysctrl(cobalt,
 			COBALT_SYS_CTRL_HPD_TO_CONNECTOR_BIT(sd_nr), hotplug);
+		cec_connected_inputs(&s->cec_adap, hotplug);
 		cobalt_dbg(1, "Set hotplug for adv %d to %d\n", sd_nr, hotplug);
 		break;
+	}
 	case V4L2_DEVICE_NOTIFY_EVENT:
 		cobalt_dbg(1, "Format changed for adv %d\n", sd_nr);
 		v4l2_event_queue(&s->vdev, arg);
@@ -627,8 +668,9 @@ static int cobalt_subdevs_hsma_init(struct cobalt *cobalt)
 	s->sd = v4l2_i2c_new_subdev_board(&cobalt->v4l2_dev,
 			s->i2c_adap, &adv7842_info, NULL);
 	if (s->sd) {
-		int err = v4l2_subdev_call(s->sd, pad, set_edid, &cobalt_edid);
+		int err;
 
+		err = v4l2_subdev_call(s->sd, pad, set_edid, &cobalt_edid);
 		if (err)
 			return err;
 		err = v4l2_subdev_call(s->sd, pad, set_fmt, NULL,
diff --git a/drivers/media/pci/cobalt/cobalt-driver.h b/drivers/media/pci/cobalt/cobalt-driver.h
index c206df9..151c80f 100644
--- a/drivers/media/pci/cobalt/cobalt-driver.h
+++ b/drivers/media/pci/cobalt/cobalt-driver.h
@@ -31,6 +31,7 @@
 #include <linux/workqueue.h>
 #include <linux/mutex.h>
 
+#include <media/cec.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
@@ -221,6 +222,7 @@ struct cobalt_stream {
 	struct list_head bufs;
 	struct i2c_adapter *i2c_adap;
 	struct v4l2_subdev *sd;
+	struct cec_adapter cec_adap;
 	struct mutex lock;
 	spinlock_t irqlock;
 	struct v4l2_dv_timings timings;
diff --git a/drivers/media/pci/cobalt/cobalt-irq.c b/drivers/media/pci/cobalt/cobalt-irq.c
index dd4bff9..0963d96 100644
--- a/drivers/media/pci/cobalt/cobalt-irq.c
+++ b/drivers/media/pci/cobalt/cobalt-irq.c
@@ -233,6 +233,9 @@ void cobalt_irq_log_status(struct cobalt *cobalt)
 	u32 mask;
 	int i;
 
+	cobalt_info("irq: edge=%08x mask=%08x\n",
+		    cobalt_read_bar1(cobalt, COBALT_SYS_STAT_EDGE),
+		    cobalt_read_bar1(cobalt, COBALT_SYS_STAT_MASK));
 	cobalt_info("irq: adv1=%u adv2=%u advout=%u none=%u full=%u\n",
 		    cobalt->irq_adv1, cobalt->irq_adv2, cobalt->irq_advout,
 		    cobalt->irq_none, cobalt->irq_full_fifo);
diff --git a/drivers/media/pci/cobalt/cobalt-v4l2.c b/drivers/media/pci/cobalt/cobalt-v4l2.c
index 9756fd3..557202b 100644
--- a/drivers/media/pci/cobalt/cobalt-v4l2.c
+++ b/drivers/media/pci/cobalt/cobalt-v4l2.c
@@ -602,6 +602,7 @@ static int cobalt_log_status(struct file *file, void *priv_fh)
 	cobalt_pcie_status_show(cobalt);
 	cobalt_cpld_status(cobalt);
 	cobalt_irq_log_status(cobalt);
+	cec_log_status(&s->cec_adap);
 	v4l2_subdev_call(s->sd, core, log_status);
 	if (!s->is_output) {
 		cobalt_video_input_status_show(s);
@@ -1161,6 +1162,64 @@ static const struct v4l2_file_operations cobalt_empty_fops = {
 	.release = v4l2_fh_release,
 };
 
+static inline struct v4l2_subdev *adap_to_sd(struct cec_adapter *adap)
+{
+	struct cobalt_stream *s = container_of(adap, struct cobalt_stream, cec_adap);
+
+	return s->sd;
+}
+
+static int cobalt_cec_enable(struct cec_adapter *adap, bool enable)
+{
+	return v4l2_subdev_call(adap_to_sd(adap), video, cec_enable, enable);
+}
+
+static int cobalt_cec_log_addr(struct cec_adapter *adap, u8 log_addr)
+{
+	return v4l2_subdev_call(adap_to_sd(adap), video, cec_log_addr,
+				log_addr);
+}
+
+static int cobalt_cec_transmit(struct cec_adapter *adap, u32 timeout_ms, struct cec_msg *msg)
+{
+	return v4l2_subdev_call(adap_to_sd(adap), video, cec_transmit, timeout_ms, msg);
+}
+
+static u8 cobalt_cec_cdc_hpd(struct cec_adapter *adap, u8 cdc_hpd_state)
+{
+	switch (cdc_hpd_state) {
+	case CEC_OP_HPD_STATE_EDID_DISABLE:
+	case CEC_OP_HPD_STATE_EDID_ENABLE:
+	case CEC_OP_HPD_STATE_EDID_DISABLE_ENABLE:
+		return CEC_OP_HPD_ERROR_NONE;
+	case CEC_OP_HPD_STATE_CP_EDID_DISABLE:
+	case CEC_OP_HPD_STATE_CP_EDID_ENABLE:
+	case CEC_OP_HPD_STATE_CP_EDID_DISABLE_ENABLE:
+	default:
+		return CEC_OP_HPD_ERROR_INITIATOR_WRONG_STATE;
+	}
+}
+
+static int cobalt_sink_initiate_arc(struct cec_adapter *adap)
+{
+	return 0;
+}
+
+static int cobalt_sink_terminate_arc(struct cec_adapter *adap)
+{
+	return 0;
+}
+
+static int cobalt_source_arc_initiated(struct cec_adapter *adap)
+{
+	return 0;
+}
+
+static int cobalt_source_arc_terminated(struct cec_adapter *adap)
+{
+	return 0;
+}
+
 static int cobalt_node_register(struct cobalt *cobalt, int node)
 {
 	static const struct v4l2_dv_timings dv1080p60 =
@@ -1168,7 +1227,7 @@ static int cobalt_node_register(struct cobalt *cobalt, int node)
 	struct cobalt_stream *s = cobalt->streams + node;
 	struct video_device *vdev = &s->vdev;
 	struct vb2_queue *q = &s->q;
-	int ret;
+	int ret = 0;
 
 	mutex_init(&s->lock);
 	spin_lock_init(&s->irqlock);
@@ -1195,6 +1254,30 @@ static int cobalt_node_register(struct cobalt *cobalt, int node)
 	if (!s->is_audio) {
 		if (s->is_dummy)
 			cobalt_warn("Setting up dummy video node %d\n", node);
+		if (s->sd) {
+			u32 caps = CEC_CAP_IO | CEC_CAP_LOG_ADDRS |
+				CEC_CAP_PASSTHROUGH | CEC_CAP_RC |
+				CEC_CAP_ARC | CEC_CAP_VENDOR_ID;
+			u8 nsinks = 0;
+
+			s->cec_adap.adap_enable = cobalt_cec_enable;
+			s->cec_adap.adap_log_addr = cobalt_cec_log_addr;
+			s->cec_adap.adap_transmit = cobalt_cec_transmit;
+			s->cec_adap.source_cdc_hpd = cobalt_cec_cdc_hpd;
+			s->cec_adap.sink_initiate_arc = cobalt_sink_initiate_arc;
+			s->cec_adap.sink_terminate_arc = cobalt_sink_terminate_arc;
+			s->cec_adap.source_arc_initiated = cobalt_source_arc_initiated;
+			s->cec_adap.source_arc_terminated = cobalt_source_arc_terminated;
+			if (s->is_output)
+				caps |= CEC_CAP_IS_SOURCE | CEC_CAP_CDC_HPD;
+			else
+				nsinks = 1;
+			ret = cec_create_adapter(&s->cec_adap, vdev->name,
+						 caps, nsinks, THIS_MODULE,
+						 &cobalt->pci_dev->dev);
+			s->cec_adap.available_log_addrs =
+				v4l2_subdev_call(s->sd, video, cec_available_log_addrs);
+		}
 		vdev->v4l2_dev = &cobalt->v4l2_dev;
 		if (s->is_dummy)
 			vdev->fops = &cobalt_empty_fops;
@@ -1208,8 +1291,11 @@ static int cobalt_node_register(struct cobalt *cobalt, int node)
 			vdev->ctrl_handler = s->sd->ctrl_handler;
 		s->timings = dv1080p60;
 		v4l2_subdev_call(s->sd, video, s_dv_timings, &s->timings);
-		if (!s->is_output && s->sd)
+		if (!s->is_output && s->sd) {
 			cobalt_enable_input(s);
+			s->cec_adap.phys_addr = 0;
+			ret = cec_enable(&s->cec_adap, true);
+		}
 		vdev->ioctl_ops = s->is_dummy ? &cobalt_ioctl_empty_ops :
 				  &cobalt_ioctl_ops;
 	}
@@ -1229,16 +1315,20 @@ static int cobalt_node_register(struct cobalt *cobalt, int node)
 	vdev->queue = q;
 
 	video_set_drvdata(vdev, s);
-	ret = vb2_queue_init(q);
+	if (ret == 0)
+		ret = vb2_queue_init(q);
 	if (!s->is_audio && ret == 0)
 		ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
-	else if (!s->is_dummy)
+	else if (!s->is_dummy && ret == 0)
 		ret = cobalt_alsa_init(s);
 
 	if (ret < 0) {
-		if (!s->is_audio)
+		if (!s->is_audio) {
+			if (s->sd)
+				cec_delete_adapter(&s->cec_adap);
 			cobalt_err("couldn't register v4l2 device node %d\n",
 					node);
+		}
 		return ret;
 	}
 	cobalt_info("registered node %d\n", node);
@@ -1269,9 +1359,12 @@ void cobalt_nodes_unregister(struct cobalt *cobalt)
 		struct cobalt_stream *s = cobalt->streams + node;
 		struct video_device *vdev = &s->vdev;
 
-		if (!s->is_audio)
+		if (!s->is_audio) {
 			video_unregister_device(vdev);
-		else if (!s->is_dummy)
+			if (s->sd)
+				cec_delete_adapter(&s->cec_adap);
+		} else if (!s->is_dummy) {
 			cobalt_alsa_exit(s);
+		}
 	}
 }
-- 
2.1.4

Re: [PATCHv8 07/15] cec: add HDMI CEC framework

[Russell King - ARM Linux]

On Tue, Aug 18, 2015 at 10:26:32AM +0200, Hans Verkuil wrote:
> +	/* Part 2: Initialize and register the character device */
> +	cdev_init(&cecdev->cdev, &cec_devnode_fops);
> +	cecdev->cdev.owner = owner;
> +
> +	ret = cdev_add(&cecdev->cdev, MKDEV(MAJOR(cec_dev_t), cecdev->minor),
> +									1);
> +	if (ret < 0) {
> +		pr_err("%s: cdev_add failed\n", __func__);
> +		goto error;
> +	}
> +
> +	/* Part 3: Register the cec device */
> +	cecdev->dev.bus = &cec_bus_type;
> +	cecdev->dev.devt = MKDEV(MAJOR(cec_dev_t), cecdev->minor);
> +	cecdev->dev.release = cec_devnode_release;
> +	if (cecdev->parent)
> +		cecdev->dev.parent = cecdev->parent;
> +	dev_set_name(&cecdev->dev, "cec%d", cecdev->minor);
> +	ret = device_register(&cecdev->dev);

It's worth pointing out that you can greatly simplify the lifetime
handling (you don't need to get and put cecdev->dev) if you make
the cdev a child of the cecdev->dev.

If you grep for kobj.parent in drivers/ you'll see many drivers are
doing this.

	cecdev->cdev.kobj.parent = &cecdev->dev.kobj;

but you will need to call device_initialize() on cecdev->dev first,
and use device_add() here.

> +	if (ret < 0) {
> +		pr_err("%s: device_register failed\n", __func__);
> +		goto error;
> +	}
> +
> +	/* Part 4: Activate this minor. The char device can now be used. */
> +	set_bit(CEC_FLAG_REGISTERED, &cecdev->flags);

Having flags to indicate whether userspace can open something is racy.
I don't see any other uses of cecdev->flags.  I think you should kill
this, and replace it with a cecdev->dead flag which indicates when the
cecdev is going away, and causes any pre-existing users to fail.


> +
> +	return 0;
> +
> +error:
> +	cdev_del(&cecdev->cdev);
> +	clear_bit(cecdev->minor, cec_devnode_nums);
> +	return ret;
> +}
> +
> +/**
> + * cec_devnode_unregister - unregister a cec device node
> + * @cecdev: the device node to unregister
> + *
> + * This unregisters the passed device. Future open calls will be met with
> + * errors.
> + *
> + * This function can safely be called if the device node has never been
> + * registered or has already been unregistered.
> + */
> +static void cec_devnode_unregister(struct cec_devnode *cecdev)
> +{
> +	/* Check if cecdev was ever registered at all */
> +	if (!cec_devnode_is_registered(cecdev))
> +		return;

Just make it a programming error if someone unregisters something that
they haven't registered... that's pretty standard kernel programming.

> +
> +	mutex_lock(&cec_devnode_lock);
> +	clear_bit(CEC_FLAG_REGISTERED, &cecdev->flags);

This should wake up the poll waitqueue so that users get to hear about
the device going away in a timely manner.

> +	mutex_unlock(&cec_devnode_lock);
> +	device_unregister(&cecdev->dev);
> +}
> +
> +int cec_create_adapter(struct cec_adapter *adap, const char *name, u32 caps,
> +		       u8 ninputs, struct module *owner, struct device *parent)
> +{
> +	int res = 0;
> +
> +	adap->owner = owner;
> +	if (WARN_ON(!owner))
> +		return -ENXIO;
> +	adap->devnode.parent = parent;
> +	if (WARN_ON(!parent))
> +		return -ENXIO;
> +	adap->name = name;
> +	adap->phys_addr = CEC_PHYS_ADDR_INVALID;
> +	adap->capabilities = caps;
> +	adap->ninputs = ninputs;
> +	adap->is_source = caps & CEC_CAP_IS_SOURCE;
> +	if (WARN_ON(!adap->ninputs && !adap->is_source))
> +		return -ENXIO;
> +	adap->cec_version = CEC_OP_CEC_VERSION_2_0;
> +	adap->vendor_id = CEC_VENDOR_ID_NONE;
> +	adap->available_log_addrs = 1;
> +	adap->sequence = 0;
> +	memset(adap->phys_addrs, 0xff, sizeof(adap->phys_addrs));
> +	mutex_init(&adap->lock);
> +	INIT_LIST_HEAD(&adap->transmit_queue);
> +	INIT_LIST_HEAD(&adap->wait_queue);
> +	adap->kthread = kthread_run(cec_thread_func, adap, "cec-%s", name);
> +	init_waitqueue_head(&adap->kthread_waitq);
> +	if (IS_ERR(adap->kthread)) {
> +		pr_err("cec-%s: kernel_thread() failed\n", name);
> +		return PTR_ERR(adap->kthread);
> +	}
> +	if (caps) {
> +		res = cec_devnode_register(&adap->devnode, adap->owner);

Okay, so adap->devnode contains a struct device.  That struct device
controls the lifetime of adap->devnode, and because adap->devnode is
part of adap, this also defines the lifetime of adap as well.  adap
must _never_ be freed until cec_devnode_release() has been called.

Looking at patch 15, the adapter structure is part of the cobalt
streams.  This makes that structure also have a lifetime controlled
by this struct device.  There is no release method implemented in
there, and indeed cec_devnode_release() shows that the release node is
optional, which suggests a misunderstanding in this area.

Far too many nested data structures are involved here.  This needs fixing
- with the code in its present form, it contains serious data structure
lifetime issues, and therefore is not ready for merging, sorry.

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.

Re: [PATCHv8 07/15] cec: add HDMI CEC framework

[Dmitry Torokhov]

On Tue, Aug 18, 2015 at 11:00:20AM +0100, Russell King - ARM Linux wrote:
> On Tue, Aug 18, 2015 at 10:26:32AM +0200, Hans Verkuil wrote:
> > +	/* Part 2: Initialize and register the character device */
> > +	cdev_init(&cecdev->cdev, &cec_devnode_fops);
> > +	cecdev->cdev.owner = owner;
> > +
> > +	ret = cdev_add(&cecdev->cdev, MKDEV(MAJOR(cec_dev_t), cecdev->minor),
> > +									1);
> > +	if (ret < 0) {
> > +		pr_err("%s: cdev_add failed\n", __func__);
> > +		goto error;
> > +	}
> > +
> > +	/* Part 3: Register the cec device */
> > +	cecdev->dev.bus = &cec_bus_type;
> > +	cecdev->dev.devt = MKDEV(MAJOR(cec_dev_t), cecdev->minor);
> > +	cecdev->dev.release = cec_devnode_release;
> > +	if (cecdev->parent)
> > +		cecdev->dev.parent = cecdev->parent;
> > +	dev_set_name(&cecdev->dev, "cec%d", cecdev->minor);
> > +	ret = device_register(&cecdev->dev);
> 
> It's worth pointing out that you can greatly simplify the lifetime
> handling (you don't need to get and put cecdev->dev) if you make
> the cdev a child of the cecdev->dev.
> 
> If you grep for kobj.parent in drivers/ you'll see many drivers are
> doing this.
> 
> 	cecdev->cdev.kobj.parent = &cecdev->dev.kobj;
> 
> but you will need to call device_initialize() on cecdev->dev first,
> and use device_add() here.

This is basically a requirement if one embeds both device and a cdev
into the same structure. Trying to do get/put in the driver is racy,
you need to let framework know (by setting cdve's parent to the device
structure).

Thanks.

-- 
Dmitry