From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
Charles Keepax <ckeepax@opensource.wolfsonmicro.com>,
patches@opensource.wolfsonmicro.com, linux-input@vger.kernel.org
Subject: Re: [PATCH v2] ALSA: ac97: Switch to dev_pm_ops
Date: Fri, 21 Aug 2015 09:15:29 -0700 [thread overview]
Message-ID: <20150821161529.GB26302@localhost> (raw)
In-Reply-To: <s5hbne1ujxk.wl-tiwai@suse.de>
On Fri, Aug 21, 2015 at 10:25:59AM +0200, Takashi Iwai wrote:
> On Fri, 21 Aug 2015 09:48:33 +0200,
> Lars-Peter Clausen wrote:
> >
> > Convert the ac97_bus from legacy suspend/resume callbacks to dev_pm_ops.
> >
> > Since there isn't anything special to do at the bus level the bus driver
> > does not have to implement any callbacks. The device driver core will
> > automatically pick up and execute the device's PM ops.
> >
> > As there is only a single AC'97 driver implementing suspend and resume,
> > update both the core and driver at the same time to avoid unnecessary code
> > churn.
> >
> > While we are at it also drop the ifdefs around the suspend/resume functions
> > to increase compile test coverage.
> >
> > Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> > ---
> > This patch touches code in both ALSA and the input subsystem. Ideally this
> > patch will be merged via the ALSA tree. Given that the wm97xx touchscreen
> > driver is not seeing too many changes these days the risk of conflicts
> > should be low.
>
> If Dmitry is happy with this, I'll take this.
Sounds good to me.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Thanks!
>
>
> thanks,
>
> Takashi
>
> >
> > Changes since v1:
> > * Drop ifdefs around suspend/resum functions
> > ---
> > drivers/input/touchscreen/wm97xx-core.c | 13 ++++---------
> > sound/ac97_bus.c | 26 --------------------------
> > 2 files changed, 4 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
> > index b1ae779..1534e9b 100644
> > --- a/drivers/input/touchscreen/wm97xx-core.c
> > +++ b/drivers/input/touchscreen/wm97xx-core.c
> > @@ -732,8 +732,7 @@ static int wm97xx_remove(struct device *dev)
> > return 0;
> > }
> >
> > -#ifdef CONFIG_PM
> > -static int wm97xx_suspend(struct device *dev, pm_message_t state)
> > +static int __maybe_unused wm97xx_suspend(struct device *dev)
> > {
> > struct wm97xx *wm = dev_get_drvdata(dev);
> > u16 reg;
> > @@ -765,7 +764,7 @@ static int wm97xx_suspend(struct device *dev, pm_message_t state)
> > return 0;
> > }
> >
> > -static int wm97xx_resume(struct device *dev)
> > +static int __maybe_unused wm97xx_resume(struct device *dev)
> > {
> > struct wm97xx *wm = dev_get_drvdata(dev);
> >
> > @@ -799,10 +798,7 @@ static int wm97xx_resume(struct device *dev)
> > return 0;
> > }
> >
> > -#else
> > -#define wm97xx_suspend NULL
> > -#define wm97xx_resume NULL
> > -#endif
> > +static SIMPLE_DEV_PM_OPS(wm97xx_pm_ops, wm97xx_suspend, wm97xx_resume);
> >
> > /*
> > * Machine specific operations
> > @@ -836,8 +832,7 @@ static struct device_driver wm97xx_driver = {
> > .owner = THIS_MODULE,
> > .probe = wm97xx_probe,
> > .remove = wm97xx_remove,
> > - .suspend = wm97xx_suspend,
> > - .resume = wm97xx_resume,
> > + .pm = &wm97xx_pm_ops,
> > };
> >
> > static int __init wm97xx_init(void)
> > diff --git a/sound/ac97_bus.c b/sound/ac97_bus.c
> > index 2b50cbe..57a6dfc 100644
> > --- a/sound/ac97_bus.c
> > +++ b/sound/ac97_bus.c
> > @@ -27,35 +27,9 @@ static int ac97_bus_match(struct device *dev, struct device_driver *drv)
> > return 1;
> > }
> >
> > -#ifdef CONFIG_PM
> > -static int ac97_bus_suspend(struct device *dev, pm_message_t state)
> > -{
> > - int ret = 0;
> > -
> > - if (dev->driver && dev->driver->suspend)
> > - ret = dev->driver->suspend(dev, state);
> > -
> > - return ret;
> > -}
> > -
> > -static int ac97_bus_resume(struct device *dev)
> > -{
> > - int ret = 0;
> > -
> > - if (dev->driver && dev->driver->resume)
> > - ret = dev->driver->resume(dev);
> > -
> > - return ret;
> > -}
> > -#endif /* CONFIG_PM */
> > -
> > struct bus_type ac97_bus_type = {
> > .name = "ac97",
> > .match = ac97_bus_match,
> > -#ifdef CONFIG_PM
> > - .suspend = ac97_bus_suspend,
> > - .resume = ac97_bus_resume,
> > -#endif /* CONFIG_PM */
> > };
> >
> > static int __init ac97_bus_init(void)
> > --
> > 2.1.4
> >
> >
--
Dmitry
next prev parent reply other threads:[~2015-08-21 16:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-21 7:48 [PATCH v2] ALSA: ac97: Switch to dev_pm_ops Lars-Peter Clausen
2015-08-21 8:25 ` Takashi Iwai
2015-08-21 16:15 ` Dmitry Torokhov [this message]
2015-08-21 16:27 ` Takashi Iwai
2015-08-21 16:59 ` Mark Brown
2015-08-21 17:31 ` Takashi Iwai
2015-08-21 16:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150821161529.GB26302@localhost \
--to=dmitry.torokhov@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=lars@metafoo.de \
--cc=linux-input@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).