linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Seth Forshee <seth.forshee@canonical.com>
To: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
	Jiri Kosina <jikos@kernel.org>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Andrew Duggan <aduggan@synaptics.com>
Subject: Re: [PATCH v2] HID: multitouch: Fetch feature reports on demand for Win8 devices
Date: Wed, 7 Oct 2015 10:56:20 -0500	[thread overview]
Message-ID: <20151007155620.GB118995@ubuntu-hedt> (raw)
In-Reply-To: <20151007133409.GA25728@mail.corp.redhat.com>

On Wed, Oct 07, 2015 at 09:34:10AM -0400, Benjamin Tissoires wrote:
> [sorry for the late answer Jiri, I was on vacations last week]
> 
> On Oct 07 2015 or thereabouts, Mika Westerberg wrote:
> > Some newer Intel Skylake based Dell laptops with Win8 precision touchpad
> > fail when initial feature reports are fetched from it. Below is an example
> > output with some additional debug included:
> > 
> >  i2c_hid i2c-DLL0704:01: Fetching the HID descriptor
> >  i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=20 00
> >  i2c_hid i2c-DLL0704:01: HID Descriptor: 1e 00 00 01 99 02 21 00 24 ...
> >  ...
> >  i2c_hid i2c-DLL0704:01: i2c_hid_get_report
> >  i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 38 02 23 00
> >  i2c_hid i2c-DLL0704:01: report (len=4): 04 00 08 05
> >  i2c_hid i2c-DLL0704:01: report id 13
> >  i2c_hid i2c-DLL0704:01: i2c_hid_get_report
> >  i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 3d 02 23 00
> >  i2c_hid i2c-DLL0704:01: failed to retrieve report from device.
> >  i2c_hid i2c-DLL0704:01: report id 7
> >  i2c_hid i2c-DLL0704:01: i2c_hid_get_report
> >  i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 37 02 23 00
> >  i2c_hid i2c-DLL0704:01: report (len=259): 03 01 07 fc 28 fe 84 40 ...
> >  i2c_hid i2c-DLL0704:01: report id 4
> >  i2c_hid i2c-DLL0704:01: i2c_hid_get_report
> >  i2c_hid i2c-DLL0704:01: __i2c_hid_command: cmd=22 00 34 02 23 00
> > 
> > We manage to fetch few reports but then the touchpad dies:
> > 
> >  i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration
> >  i2c_hid i2c-DLL0704:01: failed to retrieve report from device.
> > 
> > it eventually pulls the whole I2C bus low:
> > 
> >  i2c_designware i2c_designware.1: controller timed out
> >  i2c_hid i2c-DLL0704:01: failed to set a report to device.
> > 
> > Fix this by preventing initial feature report retrieval for Win8 devices.
> > Instead we fetch reports as needed in mt_feature_mapping(). This prevents
> > fetching reports which might cause problems with the device in question.
> > 
> > Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > ---
> > Added check for MT_CLS_WIN_8 so that the fix is only done for real Win8
> > devices.
> 
> I think we are good now. I would just like to have Seth or Andrew giving 
> a tested-by for Windows precision touchpads that can be found on the Dell
> laptops.
> 
> If the buttonpad property is set correctly, this is:
> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

This is working fine on my XPS 13 9343.

Tested-by: Seth Forshee <seth.forshee@canonical.com>

  reply	other threads:[~2015-10-07 15:56 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-28 14:47 [PATCH] HID: multitouch: Fetch feature reports on demand for Win8 devices Mika Westerberg
2015-09-29  9:04 ` Benjamin Tissoires
2015-09-30  8:45   ` Mika Westerberg
2015-10-06 14:07     ` Jiri Kosina
2015-10-07 12:33       ` [PATCH v2] " Mika Westerberg
2015-10-07 13:34         ` Benjamin Tissoires
2015-10-07 15:56           ` Seth Forshee [this message]
2015-10-08  1:12             ` Andrew Duggan
2015-10-08  9:40               ` Mika Westerberg
2015-10-09  1:10                 ` Andrew Duggan
2015-10-09  8:53                   ` Mika Westerberg
2015-10-09 13:39                     ` Benjamin Tissoires
2015-10-11 22:51         ` Jiri Kosina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151007155620.GB118995@ubuntu-hedt \
    --to=seth.forshee@canonical.com \
    --cc=aduggan@synaptics.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).