Re: [PATCH v8 3/8] ARM: dt: Binding documentation for imx25 touchscreen controller

[Dmitry Torokhov <dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On Mon, Nov 16, 2015 at 08:16:09AM -0600, Rob Herring wrote:
> On Mon, Nov 16, 2015 at 01:01:04PM +0100, Markus Pargmann wrote:
> > This is the touchscreen conversion queue binding documentation. It uses
> > the shared imx25 ADC.
> > 
> > Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> > ---
> > 
> > Notes:
> >     Changes in v5:
> >      - Fix signed/unsigned comparison
> >      - Fix unused variable settling_time by putting it in the correct argument list
> >      - Use continous conversion queue with the repeat feature and a proper
> >        repeat-wait. Previously the touchscreen caused massive number of interrupts.
> > 
> >  .../bindings/input/touchscreen/fsl-mx25-tcq.txt    | 29 ++++++++++++++++++++++
> >  1 file changed, 29 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> > new file mode 100644
> > index 000000000000..89ab47a3acc1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> > @@ -0,0 +1,29 @@
> > +Freescale mx25 TS conversion queue module
> > +
> > +mx25 touchscreen conversion queue module which controls the ADC unit of the
> > +mx25 for attached touchscreens.
> > +
> > +Required properties:
> > + - compatible: Should be "fsl,imx25-tcq".
> > + - reg: Memory range of the device.
> > + - interrupts: Should be the interrupt number associated with this module within
> > +   the tscadc unit (<0>).
> > + - interrupt-parent: Should be a phandle to the tscadc unit.
> > + - fsl,wires: Should be '<4>' or '<5>'
> > +
> > +Optional properties:
> > + - fsl,pen-debounce: Pen debounce time in nanoseconds.
> > + - fsl,pen-threshold: Pen-down threshold for the touchscreen.
> > + - fsl,settling-time: Settling time in nanoseconds.
> 
> Don't we have standard properties for these?

These are usually controller-specific so no.

Thanks.

-- 
Dmitry