* [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND
@ 2016-03-15 7:11 Dan Carpenter
2016-03-15 8:33 ` Joe Perches
2016-03-15 21:20 ` Andrew Duggan
0 siblings, 2 replies; 6+ messages in thread
From: Dan Carpenter @ 2016-03-15 7:11 UTC (permalink / raw)
To: Dmitry Torokhov, Andrew Duggan
Cc: Henrik Rydberg, Christopher Heiny, linux-input, linux-kernel,
kernel-janitors
There is a typo so we have && instead of &.
Fixes: ff8f83708b3e ('Input: synaptics-rmi4 - add support for 2D sensors and F11')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index 77a5eb8..ec8a10d 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -775,7 +775,7 @@ static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
sensor_query->has_abs = !!(query_buf[0] & RMI_F11_HAS_ABS);
sensor_query->has_gestures = !!(query_buf[0] & RMI_F11_HAS_GESTURES);
sensor_query->has_sensitivity_adjust =
- !!(query_buf[0] && RMI_F11_HAS_SENSITIVITY_ADJ);
+ !!(query_buf[0] & RMI_F11_HAS_SENSITIVITY_ADJ);
sensor_query->configurable = !!(query_buf[0] & RMI_F11_CONFIGURABLE);
sensor_query->nr_x_electrodes =
@@ -803,7 +803,7 @@ static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
sensor_query->has_bending_correction =
!!(query_buf[0] & RMI_F11_HAS_BENDING_CORRECTION);
sensor_query->has_large_object_suppression =
- !!(query_buf[0] && RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
+ !!(query_buf[0] & RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
sensor_query->has_jitter_filter =
!!(query_buf[0] & RMI_F11_HAS_JITTER_FILTER);
query_size++;
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND
2016-03-15 7:11 [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND Dan Carpenter
@ 2016-03-15 8:33 ` Joe Perches
2016-03-15 8:37 ` Dan Carpenter
2016-03-15 21:20 ` Andrew Duggan
1 sibling, 1 reply; 6+ messages in thread
From: Joe Perches @ 2016-03-15 8:33 UTC (permalink / raw)
To: Dan Carpenter, Dmitry Torokhov, Andrew Duggan
Cc: Henrik Rydberg, Christopher Heiny, linux-input, linux-kernel,
kernel-janitors
On Tue, 2016-03-15 at 10:11 +0300, Dan Carpenter wrote:
> There is a typo so we have && instead of &.
>
> Fixes: ff8f83708b3e ('Input: synaptics-rmi4 - add support for 2D sensors and F11')
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>
> diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
[]
> @@ -775,7 +775,7 @@ static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
> sensor_query->has_abs = !!(query_buf[0] & RMI_F11_HAS_ABS);
> sensor_query->has_gestures = !!(query_buf[0] & RMI_F11_HAS_GESTURES);
> sensor_query->has_sensitivity_adjust =
> - !!(query_buf[0] && RMI_F11_HAS_SENSITIVITY_ADJ);
> + !!(query_buf[0] & RMI_F11_HAS_SENSITIVITY_ADJ);
> sensor_query->configurable = !!(query_buf[0] & RMI_F11_CONFIGURABLE);
>
> sensor_query->nr_x_electrodes =
> @@ -803,7 +803,7 @@ static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
> sensor_query->has_bending_correction =
> !!(query_buf[0] & RMI_F11_HAS_BENDING_CORRECTION);
> sensor_query->has_large_object_suppression =
> - !!(query_buf[0] && RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
> + !!(query_buf[0] & RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
> sensor_query->has_jitter_filter =
> !!(query_buf[0] & RMI_F11_HAS_JITTER_FILTER);
> query_size++;
Right and as well these are bool so the !! isn't necessary.
--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND
2016-03-15 8:33 ` Joe Perches
@ 2016-03-15 8:37 ` Dan Carpenter
2016-03-15 8:54 ` Joe Perches
0 siblings, 1 reply; 6+ messages in thread
From: Dan Carpenter @ 2016-03-15 8:37 UTC (permalink / raw)
To: Joe Perches
Cc: Dmitry Torokhov, Andrew Duggan, Henrik Rydberg, Christopher Heiny,
linux-input, linux-kernel, kernel-janitors
On Tue, Mar 15, 2016 at 01:33:29AM -0700, Joe Perches wrote:
> Right and as well these are bool so the !! isn't necessary.
Not necessary but nice for reading...
regards,
dan carpenter
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND
2016-03-15 8:37 ` Dan Carpenter
@ 2016-03-15 8:54 ` Joe Perches
0 siblings, 0 replies; 6+ messages in thread
From: Joe Perches @ 2016-03-15 8:54 UTC (permalink / raw)
To: Dan Carpenter
Cc: Dmitry Torokhov, Andrew Duggan, Henrik Rydberg, Christopher Heiny,
linux-input, linux-kernel, kernel-janitors
On Tue, 2016-03-15 at 11:37 +0300, Dan Carpenter wrote:
> On Tue, Mar 15, 2016 at 01:33:29AM -0700, Joe Perches wrote:
> >
> > Right and as well these are bool so the !! isn't necessary.
> Not necessary but nice for reading...
<shrug> opinions vary.
cheers, Joe
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND
2016-03-15 7:11 [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND Dan Carpenter
2016-03-15 8:33 ` Joe Perches
@ 2016-03-15 21:20 ` Andrew Duggan
2016-03-15 23:45 ` Dmitry Torokhov
1 sibling, 1 reply; 6+ messages in thread
From: Andrew Duggan @ 2016-03-15 21:20 UTC (permalink / raw)
To: Dan Carpenter, Dmitry Torokhov
Cc: Henrik Rydberg, Christopher Heiny, linux-input, linux-kernel,
kernel-janitors
On 03/15/2016 12:11 AM, Dan Carpenter wrote:
> There is a typo so we have && instead of &.
>
> Fixes: ff8f83708b3e ('Input: synaptics-rmi4 - add support for 2D sensors and F11')
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Andrew Duggan <aduggan@synaptics.com>
> diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
> index 77a5eb8..ec8a10d 100644
> --- a/drivers/input/rmi4/rmi_f11.c
> +++ b/drivers/input/rmi4/rmi_f11.c
> @@ -775,7 +775,7 @@ static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
> sensor_query->has_abs = !!(query_buf[0] & RMI_F11_HAS_ABS);
> sensor_query->has_gestures = !!(query_buf[0] & RMI_F11_HAS_GESTURES);
> sensor_query->has_sensitivity_adjust =
> - !!(query_buf[0] && RMI_F11_HAS_SENSITIVITY_ADJ);
> + !!(query_buf[0] & RMI_F11_HAS_SENSITIVITY_ADJ);
> sensor_query->configurable = !!(query_buf[0] & RMI_F11_CONFIGURABLE);
>
> sensor_query->nr_x_electrodes =
> @@ -803,7 +803,7 @@ static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
> sensor_query->has_bending_correction =
> !!(query_buf[0] & RMI_F11_HAS_BENDING_CORRECTION);
> sensor_query->has_large_object_suppression =
> - !!(query_buf[0] && RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
> + !!(query_buf[0] & RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
> sensor_query->has_jitter_filter =
> !!(query_buf[0] & RMI_F11_HAS_JITTER_FILTER);
> query_size++;
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND
2016-03-15 21:20 ` Andrew Duggan
@ 2016-03-15 23:45 ` Dmitry Torokhov
0 siblings, 0 replies; 6+ messages in thread
From: Dmitry Torokhov @ 2016-03-15 23:45 UTC (permalink / raw)
To: Andrew Duggan
Cc: Dan Carpenter, Henrik Rydberg, Christopher Heiny, linux-input,
linux-kernel, kernel-janitors
On Tue, Mar 15, 2016 at 02:20:02PM -0700, Andrew Duggan wrote:
> On 03/15/2016 12:11 AM, Dan Carpenter wrote:
> >There is a typo so we have && instead of &.
> >
> >Fixes: ff8f83708b3e ('Input: synaptics-rmi4 - add support for 2D sensors and F11')
> >Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>
> Acked-by: Andrew Duggan <aduggan@synaptics.com>
Applied, thank you.
>
> >diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
> >index 77a5eb8..ec8a10d 100644
> >--- a/drivers/input/rmi4/rmi_f11.c
> >+++ b/drivers/input/rmi4/rmi_f11.c
> >@@ -775,7 +775,7 @@ static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
> > sensor_query->has_abs = !!(query_buf[0] & RMI_F11_HAS_ABS);
> > sensor_query->has_gestures = !!(query_buf[0] & RMI_F11_HAS_GESTURES);
> > sensor_query->has_sensitivity_adjust =
> >- !!(query_buf[0] && RMI_F11_HAS_SENSITIVITY_ADJ);
> >+ !!(query_buf[0] & RMI_F11_HAS_SENSITIVITY_ADJ);
> > sensor_query->configurable = !!(query_buf[0] & RMI_F11_CONFIGURABLE);
> > sensor_query->nr_x_electrodes =
> >@@ -803,7 +803,7 @@ static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
> > sensor_query->has_bending_correction =
> > !!(query_buf[0] & RMI_F11_HAS_BENDING_CORRECTION);
> > sensor_query->has_large_object_suppression =
> >- !!(query_buf[0] && RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
> >+ !!(query_buf[0] & RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
> > sensor_query->has_jitter_filter =
> > !!(query_buf[0] & RMI_F11_HAS_JITTER_FILTER);
> > query_size++;
>
--
Dmitry
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-03-15 23:45 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-15 7:11 [patch] Input: synaptics-rmi4 - using logical instead of bitwise AND Dan Carpenter
2016-03-15 8:33 ` Joe Perches
2016-03-15 8:37 ` Dan Carpenter
2016-03-15 8:54 ` Joe Perches
2016-03-15 21:20 ` Andrew Duggan
2016-03-15 23:45 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).