From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-input@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
devicetree <devicetree@vger.kernel.org>,
Wessel Blokzijl <wesselb94@gmail.com>,
Siebren Vroegindeweij <siebren.vroegindeweij@gmail.com>,
Robert Dolca <robert.dolca@intel.com>,
Daniel Jansen <djaniboe@gmail.com>
Subject: Re: [PATCH v6] input: touchscreen: Add generic driver for Silead touchscreens
Date: Tue, 19 Jul 2016 11:44:25 -0700 [thread overview]
Message-ID: <20160719184425.GC19250@dtor-ws> (raw)
In-Reply-To: <20160716175605.GA4873@rob-hp-laptop>
On Sat, Jul 16, 2016 at 12:56:05PM -0500, Rob Herring wrote:
> On Mon, Jul 11, 2016 at 05:51:44PM +0200, Hans de Goede wrote:
> > From: Robert Dolca <robert.dolca@intel.com>
> >
> > This driver adds support for Silead touchscreens. It has been tested
> > with GSL1680 and GSL3680 touch panels.
> >
> > It supports ACPI and device tree enumeration. Screen resolution,
> > the maximum number of fingers supported and firmware name are
> > configurable.
> >
> > Signed-off-by: Robert Dolca <robert.dolca@intel.com>
> > Signed-off-by: Daniel Jansen <djaniboe@gmail.com>
> > Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > ---
> > Changes in v6:
> > -Default to 5 fingers if max-fingers is not specified
> > -Improve devicetree binding doc: improve wake-gpios description, use
> > "See touchscreen.txt" where applicable
> > ---
> > .../bindings/input/touchscreen/silead_gsl1680.txt | 36 ++
> > drivers/input/touchscreen/Kconfig | 13 +
> > drivers/input/touchscreen/Makefile | 1 +
> > drivers/input/touchscreen/silead.c | 652 +++++++++++++++++++++
> > 4 files changed, 702 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> > create mode 100644 drivers/input/touchscreen/silead.c
> >
> > diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> > new file mode 100644
> > index 0000000..1e58d37
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> > @@ -0,0 +1,36 @@
> > +* GSL 1680 touchscreen controller
> > +
> > +Required properties:
> > +- compatible : "silead,gsl1680"
> > +- reg : I2C slave address of the chip (0x40)
> > +- interrupt-parent : a phandle pointing to the interrupt controller
> > + serving the interrupt for this chip
> > +- interrupts : interrupt specification for the gsl1680 interrupt
> > +- power-gpios : Specification for the pin connected to the gsl1680's
> > + shutdown input. This needs to be driven high to take the
> > + gsl1680 out of its low power state
> > +- touchscreen-size-x : See touchscreen.txt
> > +- touchscreen-size-y : See touchscreen.txt
> > +- touchscreen-max-fingers : maximum number of fingers the touchscreen can detect
>
> If you name it like a standard property, then it should be documented in
> touchscreen.txt.
Actually this is very much Silead-specific wart, I'd rather we called it
"max-fingers" or "silead,max-fingers" to illustrate that it is not at
all a generic property.
Rob, will you be OK with it?
Thanks.
--
Dmitry
next prev parent reply other threads:[~2016-07-19 18:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-11 15:51 [PATCH v6] input: touchscreen: Add generic driver for Silead touchscreens Hans de Goede
2016-07-12 0:01 ` Dmitry Torokhov
2016-07-12 8:10 ` Hans de Goede
2016-07-12 20:23 ` Dmitry Torokhov
2016-07-16 17:56 ` Rob Herring
2016-07-19 18:44 ` Dmitry Torokhov [this message]
2016-07-27 21:35 ` Dmitry Torokhov
2016-07-28 15:42 ` Hans de Goede
2016-07-28 18:32 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160719184425.GC19250@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=djaniboe@gmail.com \
--cc=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=robert.dolca@intel.com \
--cc=robh@kernel.org \
--cc=siebren.vroegindeweij@gmail.com \
--cc=wens@csie.org \
--cc=wesselb94@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).