[PATCH 2/5] input/alps: Handle 0-pressure 1F events

[PATCH 2/5] input/alps: Handle 0-pressure 1F events

[Ben Gamari]

While a button is held SS5 hardware will give us single-finger packets
with x, y, and pressure equal to zero. This causes annoying jumps in
pointer position if a touch is released while the button is held. Handle
this by claiming zero contacts to ensure that no position events are
provided to the user.

Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
---
 drivers/input/mouse/alps.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index b8454af..7874f4f 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1197,7 +1197,12 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
 		f->mt[0].x = SS4_1F_X_V2(p);
 		f->mt[0].y = SS4_1F_Y_V2(p);
 		f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f;
-		f->fingers = 1;
+		/*
+		 * When a button is held the device will give us events with x, y, and
+		 * pressure of 0. This causes annoying jumps if a touch is released while
+		 * the button is held. Handle this by claiming zero contacts.
+		 */
+		f->fingers = f->pressure > 0 ? 1 : 0;
 		f->first_mp = 0;
 		f->is_mp = 0;
 		break;
-- 
2.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/5] input/alps: Add touchstick support for SS5 hardware

[Ben Gamari]

Add touchstick support for the so-called SS5 hardware, which uses a
variant of the SS4 protocol.

Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Ben Gamari <ben@smart-cactus.org>
---
 drivers/input/mouse/alps.c | 64 ++++++++++++++++++++++++++++++++++++++--------
 drivers/input/mouse/alps.h |  2 ++
 2 files changed, 55 insertions(+), 11 deletions(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 936f07a..b8454af 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1156,15 +1156,27 @@ static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte)
 {
 	unsigned char pkt_id = SS4_PACKET_ID_IDLE;
 
-	if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 &&
-	    (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) {
-		pkt_id = SS4_PACKET_ID_IDLE;
-	} else if (!(byte[3] & 0x10)) {
-		pkt_id = SS4_PACKET_ID_ONE;
-	} else if (!(byte[3] & 0x20)) {
+	switch (byte[3] & 0x30) {
+	case 0x00:
+		if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 &&
+				(byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) {
+			pkt_id = SS4_PACKET_ID_IDLE;
+		} else {
+			pkt_id = SS4_PACKET_ID_ONE;
+		}
+		break;
+	case 0x10:
+		/* two-finger finger positions */
 		pkt_id = SS4_PACKET_ID_TWO;
-	} else {
+		break;
+	case 0x20:
+		/* stick pointer */
+		pkt_id = SS4_PACKET_ID_STICK;
+		break;
+	case 0x30:
+		/* third and fourth finger positions */
 		pkt_id = SS4_PACKET_ID_MULTI;
+		break;
 	}
 
 	return pkt_id;
@@ -1246,16 +1258,38 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
 		}
 		break;
 
+	case SS4_PACKET_ID_STICK:
+		if (!(priv->flags & ALPS_DUALPOINT)) {
+			psmouse_warn(psmouse,
+				     "Rejected trackstick packet from non DualPoint device");
+		} else {
+			int x = (s8)(((p[0] & 1) << 7) | (p[1] & 0x7f));
+			int y = (s8)(((p[3] & 1) << 7) | (p[2] & 0x7f));
+
+			input_report_rel(priv->dev2, REL_X, x);
+			input_report_rel(priv->dev2, REL_Y, -y);
+		}
+		break;
+
 	case SS4_PACKET_ID_IDLE:
 	default:
 		memset(f, 0, sizeof(struct alps_fields));
 		break;
 	}
 
-	f->left = !!(SS4_BTN_V2(p) & 0x01);
-	if (!(priv->flags & ALPS_BUTTONPAD)) {
-		f->right = !!(SS4_BTN_V2(p) & 0x02);
-		f->middle = !!(SS4_BTN_V2(p) & 0x04);
+	/* handle buttons */
+	if (pkt_id == SS4_PACKET_ID_STICK) {
+		f->ts_left = !!(SS4_BTN_V2(p) & 0x01);
+		if (!(priv->flags & ALPS_BUTTONPAD)) {
+			f->ts_right = !!(SS4_BTN_V2(p) & 0x02);
+			f->ts_middle = !!(SS4_BTN_V2(p) & 0x04);
+		}
+	} else {
+		f->left = !!(SS4_BTN_V2(p) & 0x01);
+		if (!(priv->flags & ALPS_BUTTONPAD)) {
+			f->right = !!(SS4_BTN_V2(p) & 0x02);
+			f->middle = !!(SS4_BTN_V2(p) & 0x04);
+		}
 	}
 
 	return 0;
@@ -1266,6 +1300,7 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
 	struct alps_data *priv = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	struct input_dev *dev = psmouse->dev;
+	struct input_dev *dev2 = priv->dev2;
 	struct alps_fields *f = &priv->f;
 
 	memset(f, 0, sizeof(struct alps_fields));
@@ -1311,6 +1346,13 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
 
 	input_report_abs(dev, ABS_PRESSURE, f->pressure);
 	input_sync(dev);
+
+	if (priv->flags & ALPS_DUALPOINT) {
+		input_report_key(dev2, BTN_LEFT, f->ts_left);
+		input_report_key(dev2, BTN_RIGHT, f->ts_right);
+		input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
+		input_sync(dev2);
+	}
 }
 
 static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse)
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index d37f814..b9417e2 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -37,12 +37,14 @@
  *  or there's button activities.
  * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
  * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
+ * SS4_PACKET_ID_STICK: A stick pointer packet
 */
 enum SS4_PACKET_ID {
 	SS4_PACKET_ID_IDLE = 0,
 	SS4_PACKET_ID_ONE,
 	SS4_PACKET_ID_TWO,
 	SS4_PACKET_ID_MULTI,
+	SS4_PACKET_ID_STICK,
 };
 
 #define SS4_COUNT_PER_ELECTRODE		256
-- 
2.9.3

[PATCH 2/5] input/alps: Handle 0-pressure 1F events

[Ben Gamari]

While a button is held SS5 hardware will give us single-finger packets
with x, y, and pressure equal to zero. This causes annoying jumps in
pointer position if a touch is released while the button is held. Handle
this by claiming zero contacts to ensure that no position events are
provided to the user.

Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Ben Gamari <ben@smart-cactus.org>
---
 drivers/input/mouse/alps.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index b8454af..7874f4f 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1197,7 +1197,12 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
 		f->mt[0].x = SS4_1F_X_V2(p);
 		f->mt[0].y = SS4_1F_Y_V2(p);
 		f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f;
-		f->fingers = 1;
+		/*
+		 * When a button is held the device will give us events with x, y, and
+		 * pressure of 0. This causes annoying jumps if a touch is released while
+		 * the button is held. Handle this by claiming zero contacts.
+		 */
+		f->fingers = f->pressure > 0 ? 1 : 0;
 		f->first_mp = 0;
 		f->is_mp = 0;
 		break;
-- 
2.9.3

[PATCH 3/5] input/alps: Allow touchsticks to report pressure

[Ben Gamari]

The SS5 hardware can report this.

Tested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Ben Gamari <ben@smart-cactus.org>
---
 drivers/input/mouse/alps.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 7874f4f..25d2cad 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -103,6 +103,7 @@ static const struct alps_nibble_commands alps_v6_nibble_commands[] = {
 					   6-byte ALPS packet */
 #define ALPS_STICK_BITS		0x100	/* separate stick button bits */
 #define ALPS_BUTTONPAD		0x200	/* device is a clickpad */
+#define ALPS_DUALPOINT_WITH_PRESSURE		0x400	/* device can report trackpoint pressure */
 
 static const struct alps_model_info alps_model_data[] = {
 	{ { 0x32, 0x02, 0x14 }, 0x00, { ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT } },	/* Toshiba Salellite Pro M10 */
@@ -1270,9 +1271,11 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
 		} else {
 			int x = (s8)(((p[0] & 1) << 7) | (p[1] & 0x7f));
 			int y = (s8)(((p[3] & 1) << 7) | (p[2] & 0x7f));
+			int pressure = (s8)(p[4] & 0x7f);
 
 			input_report_rel(priv->dev2, REL_X, x);
 			input_report_rel(priv->dev2, REL_Y, -y);
+			input_report_abs(priv->dev2, ABS_PRESSURE, pressure);
 		}
 		break;
 
@@ -2996,6 +2999,10 @@ int alps_init(struct psmouse *psmouse)
 
 		input_set_capability(dev2, EV_REL, REL_X);
 		input_set_capability(dev2, EV_REL, REL_Y);
+		if (priv->flags & ALPS_DUALPOINT_WITH_PRESSURE) {
+			input_set_capability(dev2, EV_ABS, ABS_PRESSURE);
+			input_set_abs_params(dev2, ABS_PRESSURE, 0, 127, 0, 0);
+		}
 		input_set_capability(dev2, EV_KEY, BTN_LEFT);
 		input_set_capability(dev2, EV_KEY, BTN_RIGHT);
 		input_set_capability(dev2, EV_KEY, BTN_MIDDLE);
-- 
2.9.3

[PATCH 4/5] input/alps: Set DualPoint flag for 74 03 28 devices

[Ben Gamari]

Here we introduce logic in alps_identify to set the ALPS_DUALPOINT flag
for touchpad hardware responding to E7 report with 73 03 28, as is found
in the Dell Latitude E7470.

Tested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Ben Gamari <ben@smart-cactus.org>
---
 drivers/input/mouse/alps.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 25d2cad..308f289 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -2745,6 +2745,9 @@ static int alps_set_protocol(struct psmouse *psmouse,
 		if (alps_set_defaults_ss4_v2(psmouse, priv))
 			return -EIO;
 
+		if (priv->fw_ver[1] == 0x1)
+			priv->flags |= ALPS_DUALPOINT | ALPS_DUALPOINT_WITH_PRESSURE;
+
 		break;
 	}
 
@@ -2817,6 +2820,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)
 		} else if (e7[0] == 0x73 && e7[1] == 0x03 &&
 			   e7[2] == 0x14 && ec[1] == 0x02) {
 			protocol = &alps_v8_protocol_data;
+		} else if (e7[0] == 0x73 && e7[1] == 0x03 &&
+			   e7[2] == 0x28 && ec[1] == 0x01) {
+			protocol = &alps_v8_protocol_data;
 		} else {
 			psmouse_dbg(psmouse,
 				    "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec);
-- 
2.9.3

[PATCH 5/5] Documentation/alps: Add V8 protocol documentation

[Ben Gamari]

Tested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Ben Gamari <ben@smart-cactus.org>
---
 Documentation/input/alps.txt | 57 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index 1fec113..8d1341c 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -319,3 +319,60 @@ For touchpad packet, the format is:
                otherwise byte 0 bit 4 must be set and byte 0/4/5 are
                in NEW fmt
  F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+
+
+ALPS Absolute Mode - Protocol Version 8
+---------------------------------------
+
+Spoken by SS4 (73 03 14) and SS5 (73 03 28) hardware.
+
+The packet type is given by the APD field, bits 4-5 of byte 3.
+
+Touchpad packet (APD = 0x2):
+
+           b7   b6   b5   b4   b3   b2   b1   b0
+ byte 0:  SWM  SWR  SWL    1    1    0    0   X7
+ byte 1:    0   X6   X5   X4   X3   X2   X1   X0
+ byte 2:    0   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ byte 3:    0  T&P    1    0    1    0    0   Y7
+ byte 4:    0   Z6   Z5   Z4   Z3   Z2   Z1   Z0
+ byte 5:    0    0    0    0    0    0    0    0
+
+SWM, SWR, SWL: Middle, Right, and Left button states
+
+Touchpad 1 Finger packet (APD = 0x0):
+
+           b7   b6   b5   b4   b3   b2   b1   b0
+ byte 0:  SWM  SWR  SWL    1    1   X2   X1   X0
+ byte 1:   X9   X8   X7    1   X6   X5   X4   X3
+ byte 2:    0  X11  X10  LFB   Y3   Y2   Y1   Y0
+ byte 3:   Y5   Y4    0    0    1 TAPF2 TAPF1 TAPF0
+ byte 4:  Zv7  Y11  Y10    1   Y9   Y8   Y7   Y6
+ byte 5:  Zv6  Zv5  Zv4    0  Zv3  Zv2  Zv1  Zv0
+
+TAPF: ???
+LFB:  ???
+
+Touchpad 2 Finger packet (APD = 0x1):
+
+           b7   b6   b5   b4   b3   b2   b1   b0
+ byte 0:  SWM  SWR  SWL    1    1  AX6  AX5  AX4
+ byte 1: AX11 AX10  AX9  AX8  AX7  AZ1  AY4  AZ0
+ byte 2: AY11 AY10  AY9  CONT AY8  AY7  AY6  AY5
+ byte 3:    0    0    0    1    1  BX6  BX5  BX4
+ byte 4: BX11 BX10  BX9  BX8  BX7  BZ1  BY4  BZ0
+ byte 5: BY11 BY10  BY9    0  BY8  BY7  BY5  BY5
+
+CONT: A 3-or-4 Finger packet is to follow
+
+Touchpad 3-or-4 Finger packet (APD = 0x3):
+
+           b7   b6   b5   b4   b3   b2   b1   b0
+ byte 0:  SWM  SWR  SWL    1    1  AX6  AX5  AX4
+ byte 1: AX11 AX10  AX9  AX8  AX7  AZ1  AY4  AZ0
+ byte 2: AY11 AY10  AY9  OVF  AY8  AY7  AY6  AY5
+ byte 3:    0    0    1    1    1  BX6  BX5  BX4
+ byte 4: BX11 BX10  BX9  BX8  BX7  BZ1  BY4  BZ0
+ byte 5: BY11 BY10  BY9    0  BY8  BY7  BY5  BY5
+
+OVF: 5th finger detected
-- 
2.9.3

Re: [PATCH 1/5] input/alps: Add touchstick support for SS5 hardware

[Dmitry Torokhov]

On Mon, Oct 03, 2016 at 08:16:26AM -0400, Ben Gamari wrote:
> Add touchstick support for the so-called SS5 hardware, which uses a
> variant of the SS4 protocol.
> 
> Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
> Tested-by: Michal Hocko <mhocko@suse.com>
> Signed-off-by: Ben Gamari <ben@smart-cactus.org>
> ---

Applied the lot, thanks.

>  drivers/input/mouse/alps.c | 64 ++++++++++++++++++++++++++++++++++++++--------
>  drivers/input/mouse/alps.h |  2 ++
>  2 files changed, 55 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
> index 936f07a..b8454af 100644
> --- a/drivers/input/mouse/alps.c
> +++ b/drivers/input/mouse/alps.c
> @@ -1156,15 +1156,27 @@ static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte)
>  {
>  	unsigned char pkt_id = SS4_PACKET_ID_IDLE;
>  
> -	if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 &&
> -	    (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) {
> -		pkt_id = SS4_PACKET_ID_IDLE;
> -	} else if (!(byte[3] & 0x10)) {
> -		pkt_id = SS4_PACKET_ID_ONE;
> -	} else if (!(byte[3] & 0x20)) {
> +	switch (byte[3] & 0x30) {
> +	case 0x00:
> +		if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 &&
> +				(byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) {
> +			pkt_id = SS4_PACKET_ID_IDLE;
> +		} else {
> +			pkt_id = SS4_PACKET_ID_ONE;
> +		}
> +		break;
> +	case 0x10:
> +		/* two-finger finger positions */
>  		pkt_id = SS4_PACKET_ID_TWO;
> -	} else {
> +		break;
> +	case 0x20:
> +		/* stick pointer */
> +		pkt_id = SS4_PACKET_ID_STICK;
> +		break;
> +	case 0x30:
> +		/* third and fourth finger positions */
>  		pkt_id = SS4_PACKET_ID_MULTI;
> +		break;
>  	}
>  
>  	return pkt_id;
> @@ -1246,16 +1258,38 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
>  		}
>  		break;
>  
> +	case SS4_PACKET_ID_STICK:
> +		if (!(priv->flags & ALPS_DUALPOINT)) {
> +			psmouse_warn(psmouse,
> +				     "Rejected trackstick packet from non DualPoint device");
> +		} else {
> +			int x = (s8)(((p[0] & 1) << 7) | (p[1] & 0x7f));
> +			int y = (s8)(((p[3] & 1) << 7) | (p[2] & 0x7f));
> +
> +			input_report_rel(priv->dev2, REL_X, x);
> +			input_report_rel(priv->dev2, REL_Y, -y);
> +		}
> +		break;
> +
>  	case SS4_PACKET_ID_IDLE:
>  	default:
>  		memset(f, 0, sizeof(struct alps_fields));
>  		break;
>  	}
>  
> -	f->left = !!(SS4_BTN_V2(p) & 0x01);
> -	if (!(priv->flags & ALPS_BUTTONPAD)) {
> -		f->right = !!(SS4_BTN_V2(p) & 0x02);
> -		f->middle = !!(SS4_BTN_V2(p) & 0x04);
> +	/* handle buttons */
> +	if (pkt_id == SS4_PACKET_ID_STICK) {
> +		f->ts_left = !!(SS4_BTN_V2(p) & 0x01);
> +		if (!(priv->flags & ALPS_BUTTONPAD)) {
> +			f->ts_right = !!(SS4_BTN_V2(p) & 0x02);
> +			f->ts_middle = !!(SS4_BTN_V2(p) & 0x04);
> +		}
> +	} else {
> +		f->left = !!(SS4_BTN_V2(p) & 0x01);
> +		if (!(priv->flags & ALPS_BUTTONPAD)) {
> +			f->right = !!(SS4_BTN_V2(p) & 0x02);
> +			f->middle = !!(SS4_BTN_V2(p) & 0x04);
> +		}
>  	}
>  
>  	return 0;
> @@ -1266,6 +1300,7 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
>  	struct alps_data *priv = psmouse->private;
>  	unsigned char *packet = psmouse->packet;
>  	struct input_dev *dev = psmouse->dev;
> +	struct input_dev *dev2 = priv->dev2;
>  	struct alps_fields *f = &priv->f;
>  
>  	memset(f, 0, sizeof(struct alps_fields));
> @@ -1311,6 +1346,13 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
>  
>  	input_report_abs(dev, ABS_PRESSURE, f->pressure);
>  	input_sync(dev);
> +
> +	if (priv->flags & ALPS_DUALPOINT) {
> +		input_report_key(dev2, BTN_LEFT, f->ts_left);
> +		input_report_key(dev2, BTN_RIGHT, f->ts_right);
> +		input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
> +		input_sync(dev2);
> +	}
>  }
>  
>  static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse)
> diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
> index d37f814..b9417e2 100644
> --- a/drivers/input/mouse/alps.h
> +++ b/drivers/input/mouse/alps.h
> @@ -37,12 +37,14 @@
>   *  or there's button activities.
>   * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
>   * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
> + * SS4_PACKET_ID_STICK: A stick pointer packet
>  */
>  enum SS4_PACKET_ID {
>  	SS4_PACKET_ID_IDLE = 0,
>  	SS4_PACKET_ID_ONE,
>  	SS4_PACKET_ID_TWO,
>  	SS4_PACKET_ID_MULTI,
> +	SS4_PACKET_ID_STICK,
>  };
>  
>  #define SS4_COUNT_PER_ELECTRODE		256
> -- 
> 2.9.3
> 

-- 
Dmitry

Re: [PATCH 1/5] input/alps: Add touchstick support for SS5 hardware

[Jiri Kosina]

On Tue, 4 Oct 2016, Dmitry Torokhov wrote:

> > Add touchstick support for the so-called SS5 hardware, which uses a
> > variant of the SS4 protocol.
> > 
> > Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
> > Tested-by: Michal Hocko <mhocko@suse.com>
> > Signed-off-by: Ben Gamari <ben@smart-cactus.org>
> > ---
> 
> Applied the lot, thanks.

Thanks. I see this wasn't in the d4e65476b merge; what are your plans with 
this, please? Still for this merge window?

Thanks,

-- 
Jiri Kosina
SUSE Labs

Re: [PATCH 1/5] input/alps: Add touchstick support for SS5 hardware

[Dmitry Torokhov]

On Tue, Oct 11, 2016 at 03:46:42PM +0200, Jiri Kosina wrote:
> On Tue, 4 Oct 2016, Dmitry Torokhov wrote:
> 
> > > Add touchstick support for the so-called SS5 hardware, which uses a
> > > variant of the SS4 protocol.
> > > 
> > > Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
> > > Tested-by: Michal Hocko <mhocko@suse.com>
> > > Signed-off-by: Ben Gamari <ben@smart-cactus.org>
> > > ---
> > 
> > Applied the lot, thanks.
> 
> Thanks. I see this wasn't in the d4e65476b merge; what are your plans with 
> this, please? Still for this merge window?

Yeah, I'll include in my 2nd pull later this week.

Thanks.

-- 
Dmitry