From mboxrd@z Thu Jan 1 00:00:00 1970 From: Cameron Gutman Subject: [PATCH 2/5] Input: xpad - add init packet for Hori and Titanfall 2 pads Date: Sat, 4 Feb 2017 16:29:59 -0800 Message-ID: <20170205003002.28160-3-aicommander@gmail.com> References: <20170205003002.28160-1-aicommander@gmail.com> Return-path: In-Reply-To: <20170205003002.28160-1-aicommander@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: dmitry.torokhov@gmail.com, rojtberg@gmail.com Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Cameron Gutman List-Id: linux-input@vger.kernel.org Without sending this packet, the Titanfall 2 pad (0x0e6f:0x0165) continuously attempts to handshake with the PC and never sends any input reports. The Hori gamepad (0x0f0d:0x0067) analog sticks don't work if this isn't sent, though other buttons do work without it. Signed-off-by: Cameron Gutman --- drivers/input/joystick/xpad.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 6f07b5b..3f19f32b 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -346,6 +346,14 @@ struct xpad_output_packet { /* Sequence numbers will be added before the packets are sent */ static const struct xpad_output_packet xone_init_pkt[] = { /* + * This packet is required for the Titanfall 2 Xbox One pads + * (0x0e6f:0x0165) to finish initialization and for Hori pads + * (0x0f0d:0x0067) to make the analog sticks work. + */ + {{0x01, 0x20, 0x00, 0x09, 0x00, 0x04, 0x20, 0x3a, + 0x00, 0x00, 0x00, 0x80, 0x00}, 13, true}, + + /* * This packet is required for all Xbox One pads with 2015 * or later firmware installed (or present from the factory). */ -- 2.9.3