From: David Rivshin <drivshin-WHIoityCHfoAvxtiuMwx3w@public.gmane.org>
To: Dmitry Torokhov
<dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] input: matrix_keypad: add option to drive inactive columns
Date: Wed, 22 Mar 2017 16:16:50 -0400 [thread overview]
Message-ID: <20170322201650.9072-1-drivshin@awxrd.com> (raw)
From: David Rivshin <DRivshin-5fOYsn7Fw8lBDgjK7y7TUQ@public.gmane.org>
The gpio-matrix-keypad driver normally sets inactive columns as inputs
while scanning. This does not work for all hardware, which may require
the inactive columns to be actively driven in order to overcome any
pull-ups/downs on the columns.
Signed-off-by: David Rivshin <drivshin-5fOYsn7Fw8lBDgjK7y7TUQ@public.gmane.org>
---
.../devicetree/bindings/input/gpio-matrix-keypad.txt | 2 ++
drivers/input/keyboard/matrix_keypad.c | 13 +++++++++----
include/linux/input/matrix_keypad.h | 3 +++
3 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
index d0ea09b..570dc10 100644
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
@@ -24,6 +24,8 @@ Optional Properties:
- debounce-delay-ms: debounce interval in milliseconds
- col-scan-delay-us: delay, measured in microseconds, that is needed
before we can scan keypad after activating column gpio
+- drive-inactive-cols: drive inactive columns during scan,
+ default is to turn inactive columns into inputs.
Example:
matrix-keypad {
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 18839cd..1f316d6 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -42,9 +42,10 @@ struct matrix_keypad {
};
/*
- * NOTE: normally the GPIO has to be put into HiZ when de-activated to cause
- * minmal side effect when scanning other columns, here it is configured to
- * be input, and it should work on most platforms.
+ * NOTE: If drive_inactive_cols is false, then the GPIO has to be put into
+ * HiZ when de-activated to cause minmal side effect when scanning other
+ * columns. In that case it is configured here to be input, otherwise it is
+ * driven with the inactive value.
*/
static void __activate_col(const struct matrix_keypad_platform_data *pdata,
int col, bool on)
@@ -55,7 +56,8 @@ static void __activate_col(const struct matrix_keypad_platform_data *pdata,
gpio_direction_output(pdata->col_gpios[col], level_on);
} else {
gpio_set_value_cansleep(pdata->col_gpios[col], !level_on);
- gpio_direction_input(pdata->col_gpios[col]);
+ if (!pdata->drive_inactive_cols)
+ gpio_direction_input(pdata->col_gpios[col]);
}
}
@@ -432,6 +434,9 @@ matrix_keypad_parse_dt(struct device *dev)
if (of_get_property(np, "gpio-activelow", NULL))
pdata->active_low = true;
+ pdata->drive_inactive_cols =
+ of_property_read_bool(np, "drive-inactive-cols");
+
of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms);
of_property_read_u32(np, "col-scan-delay-us",
&pdata->col_scan_delay_us);
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index 37b04a0..6174733 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -49,6 +49,8 @@ struct matrix_keymap_data {
* @wakeup: controls whether the device should be set up as wakeup
* source
* @no_autorepeat: disable key autorepeat
+ * @drive_inactive_cols: drive inactive columns during scan, rather than
+ * making them inputs.
*
* This structure represents platform-specific data that use used by
* matrix_keypad driver to perform proper initialization.
@@ -73,6 +75,7 @@ struct matrix_keypad_platform_data {
bool active_low;
bool wakeup;
bool no_autorepeat;
+ bool drive_inactive_cols;
};
int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
--
2.9.3
base-commit: c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-03-22 20:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-22 20:16 David Rivshin [this message]
[not found] ` <20170322201650.9072-1-drivshin-WHIoityCHfoAvxtiuMwx3w@public.gmane.org>
2017-03-29 2:02 ` [PATCH] input: matrix_keypad: add option to drive inactive columns Rob Herring
2017-03-29 7:15 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170322201650.9072-1-drivshin@awxrd.com \
--to=drivshin-whioitychfoavxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox