From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Nick Dyer <nick@shmanahar.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Andrew Duggan <aduggan@synaptics.com>,
Christopher Heiny <cheiny@synaptics.com>,
linux-input@vger.kernel.org, Chris Healy <cphealy@gmail.com>,
Lucas Stach <l.stach@pengutronix.de>
Subject: Re: [PATCH 3/3] Input: synaptics-rmi4 - enable IRQ operation in F34 V7
Date: Sat, 15 Apr 2017 10:51:07 -0700 [thread overview]
Message-ID: <20170415175107.GB33447@dtor-ws> (raw)
In-Reply-To: <1490403540-31425-4-git-send-email-nick@shmanahar.org>
On Sat, Mar 25, 2017 at 12:59:00AM +0000, Nick Dyer wrote:
> The polled firmware update proved unreliable when testing on S7817. Use
> attention to signal commands are complete.
>
> Signed-off-by: Nick Dyer <nick@shmanahar.org>
> ---
> drivers/input/rmi4/rmi_f34.c | 27 +++++++---
> drivers/input/rmi4/rmi_f34.h | 7 +--
> drivers/input/rmi4/rmi_f34v7.c | 114 ++++++++++++++++++++++-------------------
> 3 files changed, 81 insertions(+), 67 deletions(-)
>
> diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c
> index 425fe14..a37efca 100644
> --- a/drivers/input/rmi4/rmi_f34.c
> +++ b/drivers/input/rmi4/rmi_f34.c
> @@ -105,16 +105,27 @@ static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
> {
> struct f34_data *f34 = dev_get_drvdata(&fn->dev);
> int ret;
> + u8 status;
>
> - if (f34->bl_version != 5)
> - return 0;
> + if (f34->bl_version == 5) {
> + ret = rmi_read(f34->fn->rmi_dev, f34->v5.ctrl_address,
> + &status);
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n",
> + __func__, status, ret);
>
> - ret = rmi_read(f34->fn->rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
> - rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n",
> - __func__, f34->v5.status, ret);
> -
> - if (!ret && !(f34->v5.status & 0x7f))
> - complete(&f34->v5.cmd_done);
> + if (!ret && !(status & 0x7f))
> + complete(&f34->v5.cmd_done);
> + } else {
> + ret = rmi_read_block(f34->fn->rmi_dev,
> + f34->fn->fd.data_base_addr + f34->v7.off.flash_status,
> + &status,
> + sizeof(status));
> + rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n",
> + __func__, status, ret);
> +
> + if (!ret && !(status & 0x1f))
> + complete(&f34->v7.cmd_done);
> + }
>
> return 0;
> }
> diff --git a/drivers/input/rmi4/rmi_f34.h b/drivers/input/rmi4/rmi_f34.h
> index 43a9134..32c4e95 100644
> --- a/drivers/input/rmi4/rmi_f34.h
> +++ b/drivers/input/rmi4/rmi_f34.h
> @@ -30,6 +30,7 @@
> #define F34_IDLE_WAIT_MS 500
> #define F34_ENABLE_WAIT_MS 300
> #define F34_ERASE_WAIT_MS 5000
> +#define F34_WRITE_WAIT_MS 3000
>
> #define F34_BOOTLOADER_ID_LEN 2
>
> @@ -47,11 +48,6 @@
> #define CONFIG_ID_SIZE 32
> #define PRODUCT_ID_SIZE 10
>
> -#define ENABLE_WAIT_MS (1 * 1000)
> -#define WRITE_WAIT_MS (3 * 1000)
> -
> -#define MIN_SLEEP_TIME_US 50
> -#define MAX_SLEEP_TIME_US 100
>
> #define HAS_BSR BIT(5)
> #define HAS_CONFIG_ID BIT(3)
> @@ -292,6 +288,7 @@ struct f34v7_data {
>
> const void *config_data;
> const void *image;
> + struct completion cmd_done;
> };
>
> struct f34_data {
> diff --git a/drivers/input/rmi4/rmi_f34v7.c b/drivers/input/rmi4/rmi_f34v7.c
> index 56c6c39..e6b4a8c 100644
> --- a/drivers/input/rmi4/rmi_f34v7.c
> +++ b/drivers/input/rmi4/rmi_f34v7.c
> @@ -15,6 +15,7 @@
> #include <asm/unaligned.h>
> #include <linux/delay.h>
> #include <linux/slab.h>
> +#include <linux/jiffies.h>
>
> #include "rmi_driver.h"
> #include "rmi_f34.h"
> @@ -31,7 +32,7 @@ static int rmi_f34v7_read_flash_status(struct f34_data *f34)
> sizeof(status));
> if (ret < 0) {
> rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
> - "%s: Failed to read flash status\n", __func__);
> + "%s: Error %d reading flash status\n", __func__, ret);
> return ret;
> }
>
> @@ -60,28 +61,17 @@ static int rmi_f34v7_read_flash_status(struct f34_data *f34)
>
> static int rmi_f34v7_wait_for_idle(struct f34_data *f34, int timeout_ms)
> {
> - int count = 0;
> - int timeout_count = ((timeout_ms * 1000) / MAX_SLEEP_TIME_US) + 1;
> + unsigned long timeout;
>
> - do {
> - usleep_range(MIN_SLEEP_TIME_US, MAX_SLEEP_TIME_US);
> -
> - count++;
> -
> - rmi_f34v7_read_flash_status(f34);
> -
> - if ((f34->v7.command == v7_CMD_IDLE)
> - && (f34->v7.flash_status == 0x00)) {
> - rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
> - "Idle status detected\n");
> - return 0;
> - }
> - } while (count < timeout_count);
> + timeout = msecs_to_jiffies(timeout_ms);
>
> - dev_err(&f34->fn->dev,
> - "%s: Timed out waiting for idle status\n", __func__);
> + if (!wait_for_completion_timeout(&f34->v7.cmd_done, timeout)) {
> + dev_warn(&f34->fn->dev, "%s: Timed out waiting for idle status\n",
> + __func__);
> + return -ETIMEDOUT;
> + }
>
> - return -ETIMEDOUT;
> + return 0;
> }
>
> static int rmi_f34v7_write_command_single_transaction(struct f34_data *f34,
> @@ -285,9 +275,10 @@ static int rmi_f34v7_write_partition_id(struct f34_data *f34, u8 cmd)
> return 0;
> }
>
> -static int rmi_f34v7_read_f34v7_partition_table(struct f34_data *f34)
> +static int rmi_f34v7_read_partition_table(struct f34_data *f34)
> {
> int ret;
> + unsigned long timeout;
> u8 base;
> __le16 length;
> u16 block_number = 0;
> @@ -320,6 +311,8 @@ static int rmi_f34v7_read_f34v7_partition_table(struct f34_data *f34)
> return ret;
> }
>
> + init_completion(&f34->v7.cmd_done);
> +
> ret = rmi_f34v7_write_command(f34, v7_CMD_READ_CONFIG);
> if (ret < 0) {
> dev_err(&f34->fn->dev, "%s: Failed to write command\n",
> @@ -327,11 +320,14 @@ static int rmi_f34v7_read_f34v7_partition_table(struct f34_data *f34)
> return ret;
> }
>
> - ret = rmi_f34v7_wait_for_idle(f34, WRITE_WAIT_MS);
> - if (ret < 0) {
> - dev_err(&f34->fn->dev, "%s: Failed to wait for idle status\n",
> - __func__);
> - return ret;
> + timeout = msecs_to_jiffies(F34_WRITE_WAIT_MS);
> + while (time_before(jiffies, timeout)) {
> + msleep(5);
Changed this for "usleep_range(5000, 6000)".
> + rmi_f34v7_read_flash_status(f34);
> +
> + if ((f34->v7.command == v7_CMD_IDLE)
> + && (f34->v7.flash_status == 0x00))
> + break;
> }
>
> ret = rmi_read_block(f34->fn->rmi_dev,
> @@ -570,7 +566,7 @@ static int rmi_f34v7_read_queries(struct f34_data *f34)
> f34->v7.read_config_buf_size = f34->v7.partition_table_bytes;
> ptable = f34->v7.read_config_buf;
>
> - ret = rmi_f34v7_read_f34v7_partition_table(f34);
> + ret = rmi_f34v7_read_partition_table(f34);
> if (ret < 0) {
> dev_err(&f34->fn->dev, "%s: Failed to read partition table\n",
> __func__);
> @@ -666,6 +662,8 @@ static int rmi_f34v7_erase_config(struct f34_data *f34)
>
> dev_info(&f34->fn->dev, "Erasing config...\n");
>
> + init_completion(&f34->v7.cmd_done);
> +
> switch (f34->v7.config_area) {
> case v7_UI_CONFIG_AREA:
> ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_UI_CONFIG);
> @@ -684,11 +682,11 @@ static int rmi_f34v7_erase_config(struct f34_data *f34)
> break;
> }
>
> - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
> + ret = rmi_f34v7_wait_for_idle(f34, F34_ERASE_WAIT_MS);
> if (ret < 0)
> return ret;
>
> - return ret;
> + return 0;
> }
>
> static int rmi_f34v7_erase_guest_code(struct f34_data *f34)
> @@ -697,11 +695,13 @@ static int rmi_f34v7_erase_guest_code(struct f34_data *f34)
>
> dev_info(&f34->fn->dev, "Erasing guest code...\n");
>
> + init_completion(&f34->v7.cmd_done);
> +
> ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_GUEST_CODE);
> if (ret < 0)
> return ret;
>
> - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
> + ret = rmi_f34v7_wait_for_idle(f34, F34_ERASE_WAIT_MS);
> if (ret < 0)
> return ret;
>
> @@ -714,11 +714,13 @@ static int rmi_f34v7_erase_all(struct f34_data *f34)
>
> dev_info(&f34->fn->dev, "Erasing firmware...\n");
>
> + init_completion(&f34->v7.cmd_done);
> +
> ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_UI_FIRMWARE);
> if (ret < 0)
> return ret;
>
> - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
> + ret = rmi_f34v7_wait_for_idle(f34, F34_ERASE_WAIT_MS);
> if (ret < 0)
> return ret;
>
> @@ -743,7 +745,7 @@ static int rmi_f34v7_erase_all(struct f34_data *f34)
> return 0;
> }
>
> -static int rmi_f34v7_read_f34v7_blocks(struct f34_data *f34, u16 block_cnt,
> +static int rmi_f34v7_read_blocks(struct f34_data *f34, u16 block_cnt,
> u8 command)
> {
> int ret;
> @@ -787,17 +789,15 @@ static int rmi_f34v7_read_f34v7_blocks(struct f34_data *f34, u16 block_cnt,
> return ret;
> }
>
> + init_completion(&f34->v7.cmd_done);
> +
> ret = rmi_f34v7_write_command(f34, command);
> if (ret < 0)
> return ret;
>
> - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
> - if (ret < 0) {
> - dev_err(&f34->fn->dev,
> - "%s: Wait for idle failed (%d blks remaining)\n",
> - __func__, remaining);
> + ret = rmi_f34v7_wait_for_idle(f34, F34_ENABLE_WAIT_MS);
> + if (ret < 0)
> return ret;
> - }
>
> ret = rmi_read_block(f34->fn->rmi_dev,
> base + f34->v7.off.payload,
> @@ -853,6 +853,8 @@ static int rmi_f34v7_write_f34v7_blocks(struct f34_data *f34,
> transfer = min(remaining, max_transfer);
> put_unaligned_le16(transfer, &length);
>
> + init_completion(&f34->v7.cmd_done);
> +
> ret = rmi_write_block(f34->fn->rmi_dev,
> base + f34->v7.off.transfer_length,
> &length, sizeof(length));
> @@ -877,13 +879,9 @@ static int rmi_f34v7_write_f34v7_blocks(struct f34_data *f34,
> return ret;
> }
>
> - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
> - if (ret < 0) {
> - dev_err(&f34->fn->dev,
> - "%s: Failed wait for idle (%d blks remaining)\n",
> - __func__, remaining);
> + ret = rmi_f34v7_wait_for_idle(f34, F34_ENABLE_WAIT_MS);
> + if (ret < 0)
> return ret;
> - }
>
> block_ptr += (transfer * f34->v7.block_size);
> remaining -= transfer;
> @@ -945,6 +943,8 @@ static int rmi_f34v7_write_flash_config(struct f34_data *f34)
> return -EINVAL;
> }
>
> + init_completion(&f34->v7.cmd_done);
> +
> ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_FLASH_CONFIG);
> if (ret < 0)
> return ret;
> @@ -952,7 +952,7 @@ static int rmi_f34v7_write_flash_config(struct f34_data *f34)
> rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
> "%s: Erase flash config command written\n", __func__);
>
> - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
> + ret = rmi_f34v7_wait_for_idle(f34, F34_WRITE_WAIT_MS);
> if (ret < 0)
> return ret;
>
> @@ -981,7 +981,7 @@ static int rmi_f34v7_write_partition_table(struct f34_data *f34)
>
> f34->v7.read_config_buf_size = f34->v7.config_size;
>
> - ret = rmi_f34v7_read_f34v7_blocks(f34, block_count, v7_CMD_READ_CONFIG);
> + ret = rmi_f34v7_read_blocks(f34, block_count, v7_CMD_READ_CONFIG);
> if (ret < 0)
> return ret;
>
> @@ -1287,6 +1287,8 @@ static int rmi_f34v7_enter_flash_prog(struct f34_data *f34)
> {
> int ret;
>
> + f34->fn->rmi_dev->driver->set_irq_bits(f34->fn->rmi_dev, f34->fn->irq_mask);
> +
> ret = rmi_f34v7_read_flash_status(f34);
> if (ret < 0)
> return ret;
> @@ -1294,19 +1296,16 @@ static int rmi_f34v7_enter_flash_prog(struct f34_data *f34)
> if (f34->v7.in_bl_mode)
> return 0;
>
> + init_completion(&f34->v7.cmd_done);
> +
> ret = rmi_f34v7_write_command(f34, v7_CMD_ENABLE_FLASH_PROG);
> if (ret < 0)
> return ret;
>
> - ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
> + ret = rmi_f34v7_wait_for_idle(f34, F34_ENABLE_WAIT_MS);
> if (ret < 0)
> return ret;
>
> - if (!f34->v7.in_bl_mode) {
> - dev_err(&f34->fn->dev, "%s: BL mode not entered\n", __func__);
> - return -EINVAL;
> - }
> -
> return 0;
> }
>
> @@ -1314,6 +1313,8 @@ int rmi_f34v7_start_reflash(struct f34_data *f34, const struct firmware *fw)
> {
> int ret = 0;
>
> + f34->fn->rmi_dev->driver->set_irq_bits(f34->fn->rmi_dev, f34->fn->irq_mask);
> +
> f34->v7.config_area = v7_UI_CONFIG_AREA;
> f34->v7.image = fw->data;
>
> @@ -1376,8 +1377,13 @@ int rmi_f34v7_probe(struct f34_data *f34)
>
> memset(&f34->v7.blkcount, 0x00, sizeof(f34->v7.blkcount));
> memset(&f34->v7.phyaddr, 0x00, sizeof(f34->v7.phyaddr));
> - rmi_f34v7_read_queries(f34);
>
> - f34->v7.force_update = false;
> + init_completion(&f34->v7.cmd_done);
> +
> + ret = rmi_f34v7_read_queries(f34);
> + if (ret < 0)
> + return ret;
> +
> + f34->v7.force_update = true;
> return 0;
> }
> --
> 2.7.4
>
--
Dmitry
next prev parent reply other threads:[~2017-04-15 17:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-25 0:58 Synaptics RMI4 patches Nick Dyer
2017-03-25 0:58 ` [PATCH 1/3] Input: synaptics-rmi4 - use dev_driver_string when registering interrupt Nick Dyer
2017-03-28 0:49 ` Chris Healy
2017-03-25 0:58 ` [PATCH 2/3] Input: synaptics-rmi4 - change F12 clip to inactive border debug Nick Dyer
2017-04-11 17:27 ` Chris Healy
2017-03-25 0:59 ` [PATCH 3/3] Input: synaptics-rmi4 - enable IRQ operation in F34 V7 Nick Dyer
2017-03-28 2:19 ` Chris Healy
2017-04-15 17:51 ` Dmitry Torokhov [this message]
2017-04-14 14:43 ` Synaptics RMI4 patches Benjamin Tissoires
2017-04-15 17:49 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170415175107.GB33447@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=aduggan@synaptics.com \
--cc=benjamin.tissoires@redhat.com \
--cc=cheiny@synaptics.com \
--cc=cphealy@gmail.com \
--cc=l.stach@pengutronix.de \
--cc=linux-input@vger.kernel.org \
--cc=nick@shmanahar.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).