[PATCH] HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices

[Hans de Goede <hdegoede@redhat.com>]

ACPI devices which do not have a _PSC method are assumed to have been
put in D0 by the BIOS, but for touchscreens that is not always true,
so call acpi_device_fix_up_power to explicitly put devices without a
_PSC method into D0 state.

This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1
device failing to probe with a "hid_descr_cmd failed" error.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index ea3c3546cef7..c716d9605940 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -960,6 +960,15 @@ static int i2c_hid_acpi_pdata(struct i2c_client *client,
 	return 0;
 }
 
+static void i2c_hid_acpi_fix_up_power(struct device *dev)
+{
+	acpi_handle handle = ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	if (handle && acpi_bus_get_device(handle, &adev) == 0)
+		acpi_device_fix_up_power(adev);
+}
+
 static const struct acpi_device_id i2c_hid_acpi_match[] = {
 	{"ACPI0C50", 0 },
 	{"PNP0C50", 0 },
@@ -972,6 +981,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
 {
 	return -ENODEV;
 }
+
+static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {}
 #endif
 
 #ifdef CONFIG_OF
@@ -1070,6 +1081,8 @@ static int i2c_hid_probe(struct i2c_client *client,
 	if (ret < 0)
 		goto err;
 
+	i2c_hid_acpi_fix_up_power(&client->dev);
+
 	pm_runtime_get_noresume(&client->dev);
 	pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);
-- 
2.12.2