From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH 0/2] use correct values for startup time bits for AXP22X/AXP8XX PEKs Date: Tue, 18 Jul 2017 08:18:47 +0100 Message-ID: <20170718071847.bkujmrmna72wqwb7@dell> References: <20170717095307.15986-1-quentin.schulz@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Return-path: Received: from mail-wr0-f181.google.com ([209.85.128.181]:36611 "EHLO mail-wr0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751026AbdGRHSu (ORCPT ); Tue, 18 Jul 2017 03:18:50 -0400 Received: by mail-wr0-f181.google.com with SMTP id y43so15322883wrd.3 for ; Tue, 18 Jul 2017 00:18:50 -0700 (PDT) Content-Disposition: inline In-Reply-To: Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: Quentin Schulz Cc: dmitry.torokhov@gmail.com, wens@csie.org, hdegoede@redhat.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, thomas.petazzoni@free-electrons.com, maxime.ripard@free-electrons.com On Mon, 17 Jul 2017, Quentin Schulz wrote: > Hi all, > > On 17/07/2017 11:53, Quentin Schulz wrote: > > According to their datasheets, the AXP221, AXP223, AXP288, AXP803, > > AXP809 and AXP813 PEK have different values for startup time bits from > > the AXP20X PEK (which are currently used for all the aforementioned PMICs). > > > > This patch series adds support for platform_device_id to axp20x-pek driver > > to support different startup time bits depending on PMIC's variant and set > > the correct platform_device_id in the mfd. > > > > This has been tested on AXP813. To perform the test, modify the value of > > startup and/or shutdown of the pek in sysfs. Press the button soldered to > > PEK input of the AXP the amount of time you set in sysfs. The PMIC shuts > > down the board without needing to unplug any power supply. Press PEK button > > the amount of time you set in sysfs for startup and the PMIC will start the > > board. Note that the time bits are obivoulsy hardware reset to their > > default when you unplug all power supplies from the board. > > > > I forgot to add that it depends on this patch series (particularly the > third patch (3/6) "mfd: axp20x: Add support for AXP813 PMIC") from > Chen-Yu: > https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1428284.html So you are going to re-send? > > Quentin Schulz (2): > > Input: axp20x-pek: add support for AXP221 PEK > > mfd: axp20x: use correct platform device id for many PEK > > > > drivers/input/misc/axp20x-pek.c | 62 ++++++++++++++++++++++++++++++++++------- > > drivers/mfd/axp20x.c | 12 ++++---- > > 2 files changed, 58 insertions(+), 16 deletions(-) > > > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog