From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-i2c@vger.kernel.org
Cc: alsa-devel@alsa-project.org, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
linux-input@vger.kernel.org, linux-media@vger.kernel.org
Subject: [PATCH v3 3/4] i2c: sh_mobile: use helper to decide if DMA is useful
Date: Tue, 18 Jul 2017 12:23:38 +0200 [thread overview]
Message-ID: <20170718102339.28726-4-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20170718102339.28726-1-wsa+renesas@sang-engineering.com>
This ensures that we fall back to PIO if the buffer is too small for DMA
being useful. Otherwise, we use DMA. A bounce buffer might be applied if
the original message buffer is not DMA safe
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-sh_mobile.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 2e097d97d258bc..19f45bcd9b35ca 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -145,6 +145,7 @@ struct sh_mobile_i2c_data {
struct dma_chan *dma_rx;
struct scatterlist sg;
enum dma_data_direction dma_direction;
+ u8 *bounce_buf;
};
struct sh_mobile_dt_config {
@@ -548,6 +549,8 @@ static void sh_mobile_i2c_dma_callback(void *data)
pd->pos = pd->msg->len;
pd->stop_after_dma = true;
+ i2c_release_dma_bounce_buf(pd->msg, pd->bounce_buf);
+
iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE);
}
@@ -595,6 +598,7 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
struct dma_async_tx_descriptor *txdesc;
dma_addr_t dma_addr;
dma_cookie_t cookie;
+ u8 *dma_buf = pd->bounce_buf ?: pd->msg->buf;
if (PTR_ERR(chan) == -EPROBE_DEFER) {
if (read)
@@ -608,7 +612,7 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
if (IS_ERR(chan))
return;
- dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir);
+ dma_addr = dma_map_single(chan->device->dev, dma_buf, pd->msg->len, dir);
if (dma_mapping_error(chan->device->dev, dma_addr)) {
dev_dbg(pd->dev, "dma map failed, using PIO\n");
return;
@@ -665,7 +669,7 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
pd->pos = -1;
pd->sr = 0;
- if (pd->msg->len > 8)
+ if (i2c_check_msg_for_dma(pd->msg, 8, &pd->bounce_buf) == 0)
sh_mobile_i2c_xfer_dma(pd);
/* Enable all interrupts to begin with */
--
2.11.0
next prev parent reply other threads:[~2017-07-18 10:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-18 10:23 [PATCH v3 0/4] i2c: document DMA handling and add helpers for it Wolfram Sang
[not found] ` <20170718102339.28726-1-wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
2017-07-18 10:23 ` [PATCH v3 1/4] i2c: add helpers to ease DMA handling Wolfram Sang
2017-07-19 9:28 ` Niklas Söderlund
2017-07-23 11:22 ` Jonathan Cameron
[not found] ` <20170723122242.7fd0edf4-tko9wxEg+fIOOJlXag/Snyp2UmYkHbXO@public.gmane.org>
2017-08-16 20:58 ` Wolfram Sang
2017-08-16 14:51 ` Geert Uytterhoeven
2017-08-16 16:06 ` Wolfram Sang
2017-07-18 10:23 ` [PATCH v3 2/4] i2c: add docs to clarify " Wolfram Sang
2017-07-19 9:28 ` Niklas Söderlund
[not found] ` <20170718102339.28726-3-wsa+renesas-jBu1N2QxHDJrcw3mvpCnnVaTQe2KTcn/@public.gmane.org>
2017-07-23 11:26 ` Jonathan Cameron
2017-07-18 10:23 ` Wolfram Sang [this message]
2017-07-19 9:35 ` [PATCH v3 3/4] i2c: sh_mobile: use helper to decide if DMA is useful Niklas Söderlund
2017-07-18 10:23 ` [PATCH v3 4/4] i2c: rcar: check for DMA-capable buffers Wolfram Sang
2017-07-19 9:42 ` Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170718102339.28726-4-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).