[PATCH] input: touchscreen: ti_am335x_tsc: Fix incorrect step config for 5 wire touchscreen

[Vignesh R <vigneshr@ti.com>]

From: Jeff Lance <j-lance1@ti.com>

Step config setting for 5 wire touchscreen is incorrect for Y coordinates.
It was broken while we moved to DT. If you look close at the offending
commit bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made
configurable"), the change was:

- STEPCONFIG_XNP | STEPCONFIG_YPN;
+ ts_dev->bit_xn | ts_dev->bit_yp;

while bit_xn = STEPCONFIG_XNN and bit_yp = STEPCONFIG_YNN. Not quite the
same.

Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Signed-off-by: Jeff Lance <j-lance1@ti.com>
[vigneshr@ti.com: Rebase to v4.14-rc1]
Signed-off-by: Vignesh R <vigneshr@ti.com>
---

Tested on AM335x EVM with 5 wire tsc module. Also sanity tested
on a 4 wire tsc as well.

 drivers/input/touchscreen/ti_am335x_tsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 7953381d939a..f1043ae71dcc 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -161,7 +161,7 @@ static void titsc_step_config(struct titsc *ts_dev)
 		break;
 	case 5:
 		config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
-				ts_dev->bit_xn | ts_dev->bit_yp;
+				STEPCONFIG_XNP | STEPCONFIG_YPN;
 		break;
 	case 8:
 		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
-- 
2.14.1