[PATCH v4 0/5] Add MediaTek PMIC keys support

[PATCH v4 0/5] Add MediaTek PMIC keys support

[Chen Zhong]

Changes since v3:
- make the naming to be consistent as mtk_pmic or MTK_PMIC
- add suspend/resume functions to enable/disable irq
- change binding properties to define wakeup sources

Changes since v2:
- use standard properties for keycodes and debounce time
- change to use platform_get_irq in leaf drivers
- use better ways to define IRQ resources

Changes since v1:
- create irq mappings in mfd core driver instead of leaf drivers
- remove some unused parts in mtk-pmic-keys driver

MediaTek PMIC are multi-function devices that can handle key interrupts,
typically there are two keys attached to PMIC, which called pwrkey
and homekey. PWRKEY usually used to wake up system from sleep. Homekey
can used as volume down key due to board design. Long press keys can
shutdown PMIC, the mode can be choose to be one key only or two keys
together.
This series add support for key functions for MediaTek PMIC MT6397/MT6323.

Chen Zhong (5):
  mfd: mt6397: create irq mappings in mfd core driver
  dt-bindings: input: Add document bindings for mtk-pmic-keys
  dt-bindings: mfd: Add bindings for the keys as subnode of PMIC
  input: Add MediaTek PMIC keys support
  mfd: mt6397: Add PMIC keys support to MT6397 driver

 .../devicetree/bindings/input/mtk-pmic-keys.txt    |   41 +++
 Documentation/devicetree/bindings/mfd/mt6397.txt   |    6 +
 drivers/input/keyboard/Kconfig                     |    9 +
 drivers/input/keyboard/Makefile                    |    1 +
 drivers/input/keyboard/mtk-pmic-keys.c             |  354 ++++++++++++++++++++
 drivers/mfd/mt6397-core.c                          |   26 +-
 drivers/rtc/rtc-mt6397.c                           |    7 +-
 7 files changed, 437 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
 create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c

--
1.7.9.5

[PATCH v4 1/5] mfd: mt6397: create irq mappings in mfd core driver

[Chen Zhong]

The core driver should create and manage irq mappings instead of
leaf drivers. This patch change to pass irq domain to
devm_mfd_add_devices() and it will create mapping for irq resources
automatically. And remove irq mapping in rtc driver since this has
been done in core driver.

Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/mfd/mt6397-core.c |    4 ++--
 drivers/rtc/rtc-mt6397.c  |    7 +++----
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 04a601f..6546d7f 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -289,7 +289,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6323_devs,
 					   ARRAY_SIZE(mt6323_devs), NULL,
-					   0, NULL);
+					   0, pmic->irq_domain);
 		break;
 
 	case MT6397_CID_CODE:
@@ -304,7 +304,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 		ret = devm_mfd_add_devices(&pdev->dev, -1, mt6397_devs,
 					   ARRAY_SIZE(mt6397_devs), NULL,
-					   0, NULL);
+					   0, pmic->irq_domain);
 		break;
 
 	default:
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 1a61fa5..385f830 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -322,10 +322,9 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	rtc->addr_base = res->start;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	rtc->irq = irq_create_mapping(mt6397_chip->irq_domain, res->start);
-	if (rtc->irq <= 0)
-		return -EINVAL;
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0)
+		return rtc->irq;
 
 	rtc->regmap = mt6397_chip->regmap;
 	rtc->dev = &pdev->dev;
-- 
1.7.9.5

[PATCH v4 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

This patch adds the device tree binding documentation for the MediaTek
pmic keys found on PMIC MT6397/MT6323.

Signed-off-by: Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/input/mtk-pmic-keys.txt    |   41 ++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt

diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
new file mode 100644
index 0000000..fd48ff7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
@@ -0,0 +1,41 @@
+MediaTek MT6397/MT6323 PMIC Keys Device Driver
+
+There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
+and homekey. The key functions are defined as the subnode of the function
+node provided by MT6397/MT6323 PMIC that is being defined as one kind
+of Muti-Function Device (MFD)
+
+For MT6397/MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+
+Required properties:
+- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+- linux,keycodes: Specifies the numeric keycode values to
+	be used for reporting keys presses. The array can
+	contain up to 2 entries.
+
+Optional Properties:
+- mediatek,wakeup-keys: Specifies each key can be used as a wakeup source
+	or not. This can be customized depends on board design.
+- wakeup-source: PMIC keys can be used as wakeup sources.
+- mediatek,long-press-mode: Long press key shutdown setting, 1 for
+	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
+- debounce-interval: Long press key shutdown debouncing interval time
+	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
+
+Example:
+
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		...
+
+		mt6397keys: mt6397keys {
+			compatible = "mediatek,mt6397-keys";
+			linux,keycodes = <116>, <114>;
+			mediatek,wakeup-keys = <1>, <0>;
+			wakeup-source;
+			mediatek,long-press-mode = <1>;
+			debounce-interval = <0>;
+		};
+	};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Sun, Sep 17, 2017 at 04:00:49PM +0800, Chen Zhong wrote:
> This patch adds the device tree binding documentation for the MediaTek
> pmic keys found on PMIC MT6397/MT6323.
> 
> Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> ---
>  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   41 ++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> new file mode 100644
> index 0000000..fd48ff7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> @@ -0,0 +1,41 @@
> +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> +
> +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> +and homekey. The key functions are defined as the subnode of the function
> +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> +of Muti-Function Device (MFD)
> +
> +For MT6397/MT6323 MFD bindings see:
> +Documentation/devicetree/bindings/mfd/mt6397.txt
> +
> +Required properties:
> +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> +- linux,keycodes: Specifies the numeric keycode values to
> +	be used for reporting keys presses. The array can
> +	contain up to 2 entries.
> +
> +Optional Properties:
> +- mediatek,wakeup-keys: Specifies each key can be used as a wakeup source
> +	or not. This can be customized depends on board design.

I think this should be a common property if we're going to put into DT. 
Something like "wakeup-scancodes" to be clear the values are the raw 
scancodes. Alternatively, we could list Linux keycodes instead with 
something like "linux,wakeup-keycodes".

> +- wakeup-source: PMIC keys can be used as wakeup sources.

Just "See ../power/wakeup-source.txt" for the description.

> +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> +- debounce-interval: Long press key shutdown debouncing interval time
> +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.

This property units should be in milliseconds. However, this doesn't 
sound like debounce filtering time if 5-14 seconds. That sounds like 
forced power off time (i.e. for a hung device). This also should be 
common. I imagine we already have some drivers with similar properties.

Rob

Re: [PATCH v4 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Dmitry Torokhov]

On Wed, Sep 20, 2017 at 03:53:01PM -0500, Rob Herring wrote:
> On Sun, Sep 17, 2017 at 04:00:49PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> > 
> > Signed-off-by: Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> > ---
> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   41 ++++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..fd48ff7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,41 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > +	be used for reporting keys presses. The array can
> > +	contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- mediatek,wakeup-keys: Specifies each key can be used as a wakeup source
> > +	or not. This can be customized depends on board design.
> 
> I think this should be a common property if we're going to put into DT. 
> Something like "wakeup-scancodes" to be clear the values are the raw 
> scancodes. Alternatively, we could list Linux keycodes instead with 
> something like "linux,wakeup-keycodes".

Should we go the gpio-keys way and describe keys as sub-nodes, possibly
using address as index?

		mt6397keys: mt6397keys {
			...

			power@0 {
				linux,code = <116>;
				wakeup-source;
			};

			home@1 {
				linux,code = <...>;
			};
		};

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Wed, 2017-09-20 at 15:53 -0500, Rob Herring wrote:
> On Sun, Sep 17, 2017 at 04:00:49PM +0800, Chen Zhong wrote:
> > This patch adds the device tree binding documentation for the MediaTek
> > pmic keys found on PMIC MT6397/MT6323.
> > 
> > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> > ---
> >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   41 ++++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > new file mode 100644
> > index 0000000..fd48ff7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > @@ -0,0 +1,41 @@
> > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > +
> > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > +and homekey. The key functions are defined as the subnode of the function
> > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > +of Muti-Function Device (MFD)
> > +
> > +For MT6397/MT6323 MFD bindings see:
> > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > +
> > +Required properties:
> > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > +- linux,keycodes: Specifies the numeric keycode values to
> > +	be used for reporting keys presses. The array can
> > +	contain up to 2 entries.
> > +
> > +Optional Properties:
> > +- mediatek,wakeup-keys: Specifies each key can be used as a wakeup source
> > +	or not. This can be customized depends on board design.
> 
> I think this should be a common property if we're going to put into DT. 
> Something like "wakeup-scancodes" to be clear the values are the raw 
> scancodes. Alternatively, we could list Linux keycodes instead with 
> something like "linux,wakeup-keycodes".
> 
> > +- wakeup-source: PMIC keys can be used as wakeup sources.
> 
> Just "See ../power/wakeup-source.txt" for the description.
> 
> > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> > +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> > +- debounce-interval: Long press key shutdown debouncing interval time
> > +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> 
> This property units should be in milliseconds. However, this doesn't 
> sound like debounce filtering time if 5-14 seconds. That sounds like 
> forced power off time (i.e. for a hung device). This also should be 
> common. I imagine we already have some drivers with similar properties.

Hi Rob,

I searched in kernel documents and found a similar usage in
"ti,palmas-pwrbutton.txt"
"- ti,palmas-long-press-seconds: Duration in seconds which the power
  button should be kept pressed for Palmas to power off automatically."

Could I just wrote it like this?
mediatek,long-press-seconds = <0>;

And for the wakeup source part, how about Dmitry's suggestion? 
The whole device node would be:

mt6397keys: mt6397keys {
	compatible = "mediatek,mt6397-keys";
	mediatek,long-press-mode = <1>;
	mediatek,long-press-seconds = <0>;
	
	power@0 {
		linux,code = <116>;
		wakeup-source;
	};

	home@0 {
		linux,code = <114>;
	};
};

Thank you.

> 
> Rob

Re: [PATCH v4 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

Sorry for the typo.

On Sat, 2017-09-23 at 14:38 +0800, Chen Zhong wrote:
> On Wed, 2017-09-20 at 15:53 -0500, Rob Herring wrote:
> > On Sun, Sep 17, 2017 at 04:00:49PM +0800, Chen Zhong wrote:
> > > This patch adds the device tree binding documentation for the MediaTek
> > > pmic keys found on PMIC MT6397/MT6323.
> > > 
> > > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> > > ---
> > >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   41 ++++++++++++++++++++
> > >  1 file changed, 41 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > > 
> > > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > > new file mode 100644
> > > index 0000000..fd48ff7
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> > > @@ -0,0 +1,41 @@
> > > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> > > +
> > > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> > > +and homekey. The key functions are defined as the subnode of the function
> > > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> > > +of Muti-Function Device (MFD)
> > > +
> > > +For MT6397/MT6323 MFD bindings see:
> > > +Documentation/devicetree/bindings/mfd/mt6397.txt
> > > +
> > > +Required properties:
> > > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> > > +- linux,keycodes: Specifies the numeric keycode values to
> > > +	be used for reporting keys presses. The array can
> > > +	contain up to 2 entries.
> > > +
> > > +Optional Properties:
> > > +- mediatek,wakeup-keys: Specifies each key can be used as a wakeup source
> > > +	or not. This can be customized depends on board design.
> > 
> > I think this should be a common property if we're going to put into DT. 
> > Something like "wakeup-scancodes" to be clear the values are the raw 
> > scancodes. Alternatively, we could list Linux keycodes instead with 
> > something like "linux,wakeup-keycodes".
> > 
> > > +- wakeup-source: PMIC keys can be used as wakeup sources.
> > 
> > Just "See ../power/wakeup-source.txt" for the description.
> > 
> > > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> > > +	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> > > +- debounce-interval: Long press key shutdown debouncing interval time
> > > +	in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> > 
> > This property units should be in milliseconds. However, this doesn't 
> > sound like debounce filtering time if 5-14 seconds. That sounds like 
> > forced power off time (i.e. for a hung device). This also should be 
> > common. I imagine we already have some drivers with similar properties.
> 
> Hi Rob,
> 
> I searched in kernel documents and found a similar usage in
> "ti,palmas-pwrbutton.txt"
> "- ti,palmas-long-press-seconds: Duration in seconds which the power
>   button should be kept pressed for Palmas to power off automatically."
> 
> Could I just wrote it like this?
> mediatek,long-press-seconds = <0>;
> 
> And for the wakeup source part, how about Dmitry's suggestion? 
> The whole device node would be:
> 
> mt6397keys: mt6397keys {
> 	compatible = "mediatek,mt6397-keys";
> 	mediatek,long-press-mode = <1>;
> 	mediatek,long-press-seconds = <0>;
> 	
> 	power@0 {
> 		linux,code = <116>;
> 		wakeup-source;
> 	};
> 
> 	home@0 {
should be home@1 {
> 		linux,code = <114>;
> 	};
> };
> 
> Thank you.
> 
> > 
> > Rob
> 

Re: [PATCH v4 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Rob Herring]

On Sat, Sep 23, 2017 at 1:47 AM, Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote:
> Sorry for the typo.
>
> On Sat, 2017-09-23 at 14:38 +0800, Chen Zhong wrote:
>> On Wed, 2017-09-20 at 15:53 -0500, Rob Herring wrote:
>> > On Sun, Sep 17, 2017 at 04:00:49PM +0800, Chen Zhong wrote:
>> > > This patch adds the device tree binding documentation for the MediaTek
>> > > pmic keys found on PMIC MT6397/MT6323.
>> > >
>> > > Signed-off-by: Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
>> > > ---
>> > >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   41 ++++++++++++++++++++
>> > >  1 file changed, 41 insertions(+)
>> > >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > >
>> > > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > > new file mode 100644
>> > > index 0000000..fd48ff7
>> > > --- /dev/null
>> > > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
>> > > @@ -0,0 +1,41 @@
>> > > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
>> > > +
>> > > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
>> > > +and homekey. The key functions are defined as the subnode of the function
>> > > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
>> > > +of Muti-Function Device (MFD)
>> > > +
>> > > +For MT6397/MT6323 MFD bindings see:
>> > > +Documentation/devicetree/bindings/mfd/mt6397.txt
>> > > +
>> > > +Required properties:
>> > > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
>> > > +- linux,keycodes: Specifies the numeric keycode values to
>> > > + be used for reporting keys presses. The array can
>> > > + contain up to 2 entries.
>> > > +
>> > > +Optional Properties:
>> > > +- mediatek,wakeup-keys: Specifies each key can be used as a wakeup source
>> > > + or not. This can be customized depends on board design.
>> >
>> > I think this should be a common property if we're going to put into DT.
>> > Something like "wakeup-scancodes" to be clear the values are the raw
>> > scancodes. Alternatively, we could list Linux keycodes instead with
>> > something like "linux,wakeup-keycodes".
>> >
>> > > +- wakeup-source: PMIC keys can be used as wakeup sources.
>> >
>> > Just "See ../power/wakeup-source.txt" for the description.
>> >
>> > > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
>> > > + pwrkey only, 2 for pwrkey/homekey together, others for disabled.
>> > > +- debounce-interval: Long press key shutdown debouncing interval time
>> > > + in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
>> >
>> > This property units should be in milliseconds. However, this doesn't
>> > sound like debounce filtering time if 5-14 seconds. That sounds like
>> > forced power off time (i.e. for a hung device). This also should be
>> > common. I imagine we already have some drivers with similar properties.
>>
>> Hi Rob,
>>
>> I searched in kernel documents and found a similar usage in
>> "ti,palmas-pwrbutton.txt"
>> "- ti,palmas-long-press-seconds: Duration in seconds which the power
>>   button should be kept pressed for Palmas to power off automatically."
>>
>> Could I just wrote it like this?
>> mediatek,long-press-seconds = <0>;

That doesn't really tell what the long press does. How about
"power-off-time-sec"? Surprisingly we don't have a common keyboard
binding doc, so please start one and document it there. Then just
refer to it.

>>
>> And for the wakeup source part, how about Dmitry's suggestion?

It's fine for me.

>> The whole device node would be:
>>
>> mt6397keys: mt6397keys {
>>       compatible = "mediatek,mt6397-keys";
>>       mediatek,long-press-mode = <1>;
>>       mediatek,long-press-seconds = <0>;
>>
>>       power@0 {
>>               linux,code = <116>;

linux,keycodes

Also, you either need a reg property with "0" or drop the unit address.

>>               wakeup-source;
>>       };
>>
>>       home@0 {
> should be home@1 {
>>               linux,code = <114>;
>>       };
>> };
>>
>> Thank you.
>>
>> >
>> > Rob
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 2/5] dt-bindings: input: Add document bindings for mtk-pmic-keys

[Chen Zhong]

On Sun, 2017-09-24 at 23:11 -0500, Rob Herring wrote:
> On Sat, Sep 23, 2017 at 1:47 AM, Chen Zhong <chen.zhong@mediatek.com> wrote:
> > Sorry for the typo.
> >
> > On Sat, 2017-09-23 at 14:38 +0800, Chen Zhong wrote:
> >> On Wed, 2017-09-20 at 15:53 -0500, Rob Herring wrote:
> >> > On Sun, Sep 17, 2017 at 04:00:49PM +0800, Chen Zhong wrote:
> >> > > This patch adds the device tree binding documentation for the MediaTek
> >> > > pmic keys found on PMIC MT6397/MT6323.
> >> > >
> >> > > Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
> >> > > ---
> >> > >  .../devicetree/bindings/input/mtk-pmic-keys.txt    |   41 ++++++++++++++++++++
> >> > >  1 file changed, 41 insertions(+)
> >> > >  create mode 100644 Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > >
> >> > > diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > > new file mode 100644
> >> > > index 0000000..fd48ff7
> >> > > --- /dev/null
> >> > > +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> >> > > @@ -0,0 +1,41 @@
> >> > > +MediaTek MT6397/MT6323 PMIC Keys Device Driver
> >> > > +
> >> > > +There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
> >> > > +and homekey. The key functions are defined as the subnode of the function
> >> > > +node provided by MT6397/MT6323 PMIC that is being defined as one kind
> >> > > +of Muti-Function Device (MFD)
> >> > > +
> >> > > +For MT6397/MT6323 MFD bindings see:
> >> > > +Documentation/devicetree/bindings/mfd/mt6397.txt
> >> > > +
> >> > > +Required properties:
> >> > > +- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
> >> > > +- linux,keycodes: Specifies the numeric keycode values to
> >> > > + be used for reporting keys presses. The array can
> >> > > + contain up to 2 entries.
> >> > > +
> >> > > +Optional Properties:
> >> > > +- mediatek,wakeup-keys: Specifies each key can be used as a wakeup source
> >> > > + or not. This can be customized depends on board design.
> >> >
> >> > I think this should be a common property if we're going to put into DT.
> >> > Something like "wakeup-scancodes" to be clear the values are the raw
> >> > scancodes. Alternatively, we could list Linux keycodes instead with
> >> > something like "linux,wakeup-keycodes".
> >> >
> >> > > +- wakeup-source: PMIC keys can be used as wakeup sources.
> >> >
> >> > Just "See ../power/wakeup-source.txt" for the description.
> >> >
> >> > > +- mediatek,long-press-mode: Long press key shutdown setting, 1 for
> >> > > + pwrkey only, 2 for pwrkey/homekey together, others for disabled.
> >> > > +- debounce-interval: Long press key shutdown debouncing interval time
> >> > > + in seconds. 0/1/2/3 for 8/11/14/5 seconds. If not specified defaults to 0.
> >> >
> >> > This property units should be in milliseconds. However, this doesn't
> >> > sound like debounce filtering time if 5-14 seconds. That sounds like
> >> > forced power off time (i.e. for a hung device). This also should be
> >> > common. I imagine we already have some drivers with similar properties.
> >>
> >> Hi Rob,
> >>
> >> I searched in kernel documents and found a similar usage in
> >> "ti,palmas-pwrbutton.txt"
> >> "- ti,palmas-long-press-seconds: Duration in seconds which the power
> >>   button should be kept pressed for Palmas to power off automatically."
> >>
> >> Could I just wrote it like this?
> >> mediatek,long-press-seconds = <0>;
> 
> That doesn't really tell what the long press does. How about
> "power-off-time-sec"? Surprisingly we don't have a common keyboard
> binding doc, so please start one and document it there. Then just
> refer to it.
> 

OK, I will add a common document named "keys.txt" and put the long press
property "power-off-time-sec" there as a common property.

> >>
> >> And for the wakeup source part, how about Dmitry's suggestion?
> 
> It's fine for me.
> 
> >> The whole device node would be:
> >>
> >> mt6397keys: mt6397keys {
> >>       compatible = "mediatek,mt6397-keys";
> >>       mediatek,long-press-mode = <1>;
> >>       mediatek,long-press-seconds = <0>;
> >>
> >>       power@0 {
> >>               linux,code = <116>;
> 
> linux,keycodes
> 
> Also, you either need a reg property with "0" or drop the unit address.

There is no need to add reg property here, I'll drop the unit address.

Thank you.
> 
> >>               wakeup-source;
> >>       };
> >>
> >>       home@0 {
> > should be home@1 {
> >>               linux,code = <114>;
> >>       };
> >> };
> >>
> >> Thank you.
> >>
> >> >
> >> > Rob
> >>
> >
> >

[PATCH v4 3/5] dt-bindings: mfd: Add bindings for the keys as subnode of PMIC

[Chen Zhong]

This patch adds documentation for device tree bindings for keys support
as the subnode of MT6397/MT6323 PMIC.

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Acked-for-MFD-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/mfd/mt6397.txt |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 522a3bb..d1df77f 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -7,6 +7,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 - GPIO
 - Clock
 - LED
+- Keys
 
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
@@ -40,6 +41,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6323-led"
 	see Documentation/devicetree/bindings/leds/leds-mt6323.txt
 
+- keys
+	Required properties:
+		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+
 Example:
 	pwrap: pwrap@1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 4/5] input: Add MediaTek PMIC keys support

[Chen Zhong]

This patch add support to handle MediaTek PMIC MT6397/MT6323 key
interrupts including pwrkey and homekey, also add setting for
long press key shutdown behavior.

Signed-off-by: Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
 drivers/input/keyboard/Kconfig         |    9 +
 drivers/input/keyboard/Makefile        |    1 +
 drivers/input/keyboard/mtk-pmic-keys.c |  354 ++++++++++++++++++++++++++++++++
 3 files changed, 364 insertions(+)
 create mode 100644 drivers/input/keyboard/mtk-pmic-keys.c

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4c4ab1c..bd4e20a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -756,4 +756,13 @@ config KEYBOARD_BCM
 	  To compile this driver as a module, choose M here: the
 	  module will be called bcm-keypad.
 
+config KEYBOARD_MTK_PMIC
+	tristate "MediaTek PMIC keys support"
+	depends on MFD_MT6397
+	help
+	  Say Y here if you want to use the pmic keys (powerkey/homekey).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pmic-keys.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index d2338ba..20c0b98 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
+obj-$(CONFIG_KEYBOARD_MTK_PMIC) 	+= mtk-pmic-keys.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
 obj-$(CONFIG_KEYBOARD_NSPIRE)		+= nspire-keypad.o
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
new file mode 100644
index 0000000..23b6ee4
--- /dev/null
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright (C) 2017 MediaTek, Inc.
+ *
+ * Author: Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6397/registers.h>
+#include <linux/mfd/mt6397/core.h>
+
+#define MTK_PMIC_PWRKEY_RST_EN_MASK	0x1
+#define MTK_PMIC_PWRKEY_RST_EN_SHIFT	6
+#define MTK_PMIC_HOMEKEY_RST_EN_MASK	0x1
+#define MTK_PMIC_HOMEKEY_RST_EN_SHIFT	5
+#define MTK_PMIC_RST_DU_MASK		0x3
+#define MTK_PMIC_RST_DU_SHIFT		8
+
+#define MTK_PMIC_PWRKEY_RST		\
+	(MTK_PMIC_PWRKEY_RST_EN_MASK << MTK_PMIC_PWRKEY_RST_EN_SHIFT)
+#define MTK_PMIC_HOMEKEY_RST		\
+	(MTK_PMIC_HOMEKEY_RST_EN_MASK << MTK_PMIC_HOMEKEY_RST_EN_SHIFT)
+
+#define MTK_PMIC_PWRKEY_INDEX	0
+#define MTK_PMIC_HOMEKEY_INDEX	1
+#define MTK_PMIC_MAX_KEY_COUNT	2
+
+struct mtk_pmic_keys_regs {
+	u32 deb_reg;
+	u32 deb_mask;
+	u32 intsel_reg;
+	u32 intsel_mask;
+};
+
+#define MTK_PMIC_KEYS_REGS(_deb_reg, _deb_mask,		\
+	_intsel_reg, _intsel_mask)			\
+{							\
+	.deb_reg		= _deb_reg,		\
+	.deb_mask		= _deb_mask,		\
+	.intsel_reg		= _intsel_reg,		\
+	.intsel_mask		= _intsel_mask,		\
+}
+
+struct mtk_pmic_regs {
+	const struct mtk_pmic_keys_regs keys_regs[MTK_PMIC_MAX_KEY_COUNT];
+	u32 pmic_rst_reg;
+};
+
+static const struct mtk_pmic_regs mt6397_regs = {
+	.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6397_CHRSTATUS,
+		0x8, MT6397_INT_RSV, 0x10),
+	.keys_regs[MTK_PMIC_HOMEKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6397_OCSTATUS2,
+		0x10, MT6397_INT_RSV, 0x8),
+	.pmic_rst_reg = MT6397_TOP_RST_MISC,
+};
+
+static const struct mtk_pmic_regs mt6323_regs = {
+	.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x2, MT6323_INT_MISC_CON, 0x10),
+	.keys_regs[MTK_PMIC_HOMEKEY_INDEX] =
+		MTK_PMIC_KEYS_REGS(MT6323_CHRSTATUS,
+		0x4, MT6323_INT_MISC_CON, 0x8),
+	.pmic_rst_reg = MT6323_TOP_RST_MISC,
+};
+
+struct mtk_pmic_keys_info {
+	struct mtk_pmic_keys *keys;
+	const struct mtk_pmic_keys_regs *regs;
+	unsigned int keycode;
+	int irq;
+	bool wakeup:1;
+};
+
+struct mtk_pmic_keys {
+	struct input_dev *input_dev;
+	struct device *dev;
+	struct regmap *regmap;
+	struct mtk_pmic_keys_info keys[MTK_PMIC_MAX_KEY_COUNT];
+};
+
+enum mtk_pmic_keys_lp_mode {
+	LP_DISABLE,
+	LP_ONEKEY,
+	LP_TWOKEY,
+};
+
+static void mtk_pmic_keys_lp_reset_setup(struct mtk_pmic_keys *keys,
+		u32 pmic_rst_reg)
+{
+	int ret;
+	u32 long_press_mode, long_press_debounce;
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"debounce-interval", &long_press_debounce);
+	if (ret)
+		long_press_debounce = 0;
+
+	regmap_update_bits(keys->regmap, pmic_rst_reg,
+			   MTK_PMIC_RST_DU_MASK << MTK_PMIC_RST_DU_SHIFT,
+			   long_press_debounce << MTK_PMIC_RST_DU_SHIFT);
+
+	ret = of_property_read_u32(keys->dev->of_node,
+		"mediatek,long-press-mode", &long_press_mode);
+	if (ret)
+		long_press_mode = LP_DISABLE;
+
+	switch (long_press_mode) {
+	case LP_ONEKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_PWRKEY_RST,
+				   MTK_PMIC_PWRKEY_RST);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_HOMEKEY_RST,
+				   0);
+		break;
+	case LP_TWOKEY:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_PWRKEY_RST,
+				   MTK_PMIC_PWRKEY_RST);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_HOMEKEY_RST,
+				   MTK_PMIC_HOMEKEY_RST);
+		break;
+	case LP_DISABLE:
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_PWRKEY_RST,
+				   0);
+		regmap_update_bits(keys->regmap, pmic_rst_reg,
+				   MTK_PMIC_HOMEKEY_RST,
+				   0);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t mtk_pmic_keys_irq_handler_thread(int irq, void *data)
+{
+	struct mtk_pmic_keys_info *info = data;
+	u32 key_deb, pressed;
+
+	regmap_read(info->keys->regmap, info->regs->deb_reg, &key_deb);
+
+	key_deb &= info->regs->deb_mask;
+
+	pressed = !key_deb;
+
+	input_report_key(info->keys->input_dev, info->keycode, pressed);
+	input_sync(info->keys->input_dev);
+
+	dev_dbg(info->keys->dev, "(%s) key =%d using PMIC\n",
+		 pressed ? "pressed" : "released", info->keycode);
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_pmic_key_setup(struct mtk_pmic_keys *keys,
+		struct mtk_pmic_keys_info *info)
+{
+	int ret;
+
+	info->keys = keys;
+
+	ret = regmap_update_bits(keys->regmap, info->regs->intsel_reg,
+				 info->regs->intsel_mask,
+				 info->regs->intsel_mask);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(keys->dev, info->irq, NULL,
+					mtk_pmic_keys_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mtk-pmic-keys", info);
+	if (ret) {
+		dev_err(keys->dev, "Failed to request IRQ: %d: %d\n",
+			info->irq, ret);
+		return ret;
+	}
+
+	input_set_capability(keys->input_dev, EV_KEY, info->keycode);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_pmic_keys_suspend(struct device *dev)
+{
+	struct mtk_pmic_keys *keys = dev_get_drvdata(dev);
+	int index;
+
+	for (index = 0; index < MTK_PMIC_MAX_KEY_COUNT; index++) {
+		if (keys->keys[index].wakeup)
+			enable_irq_wake(keys->keys[index].irq);
+	}
+
+	return 0;
+}
+
+static int mtk_pmic_keys_resume(struct device *dev)
+{
+	struct mtk_pmic_keys *keys = dev_get_drvdata(dev);
+	int index;
+
+	for (index = 0; index < MTK_PMIC_MAX_KEY_COUNT; index++) {
+		if (keys->keys[index].wakeup)
+			disable_irq_wake(keys->keys[index].irq);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mtk_pmic_keys_pm_ops, mtk_pmic_keys_suspend,
+			mtk_pmic_keys_resume);
+
+static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = {
+	{
+		.compatible = "mediatek,mt6397-keys",
+		.data = &mt6397_regs,
+	}, {
+		.compatible = "mediatek,mt6323-keys",
+		.data = &mt6323_regs,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, of_mtk_pmic_keys_match_tbl);
+
+static int mtk_pmic_keys_probe(struct platform_device *pdev)
+{
+	int error, index = 0;
+	unsigned int keycount;
+	unsigned int keycodes[MTK_PMIC_MAX_KEY_COUNT];
+	unsigned int wakeup_srcs[MTK_PMIC_MAX_KEY_COUNT] = {0};
+	struct mt6397_chip *pmic_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mtk_pmic_keys *keys;
+	const struct mtk_pmic_regs *mtk_pmic_regs;
+	struct input_dev *input_dev;
+	const struct of_device_id *of_id =
+		of_match_device(of_mtk_pmic_keys_match_tbl, &pdev->dev);
+
+	keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	keys->dev = &pdev->dev;
+	keys->regmap = pmic_chip->regmap;
+	mtk_pmic_regs = of_id->data;
+
+	keys->input_dev = input_dev = devm_input_allocate_device(keys->dev);
+	if (!input_dev) {
+		dev_err(keys->dev, "input allocate device fail.\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "mtk-pmic-keys";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0001;
+
+	keycount = device_property_read_u32_array(keys->dev, "linux,keycodes",
+						  NULL, 0);
+	if (keycount > MTK_PMIC_MAX_KEY_COUNT) {
+		dev_err(keys->dev, "too many keys defined (%d)\n", keycount);
+		return -EINVAL;
+	}
+
+	error = device_property_read_u32_array(keys->dev, "linux,keycodes",
+					       keycodes, keycount);
+	if (error) {
+		dev_err(keys->dev,
+			"failed to read linux,keycode property: %d\n", error);
+		return error;
+	}
+
+	if (device_property_read_bool(keys->dev, "wakeup-source")) {
+		error = device_property_read_u32_array(keys->dev,
+						       "mediatek,wakeup-keys",
+						       wakeup_srcs, keycount);
+		if (error) {
+			dev_err(keys->dev,
+				"failed to read wakeup-source property: %d\n",
+				error);
+			return error;
+		}
+	}
+
+	for (index = 0; index < keycount; index++) {
+		keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index];
+
+		keys->keys[index].irq = platform_get_irq(pdev, index);
+		if (keys->keys[index].irq < 0)
+			return keys->keys[index].irq;
+
+		keys->keys[index].keycode = keycodes[index];
+
+		if (wakeup_srcs[index])
+			keys->keys[index].wakeup = true;
+
+		error = mtk_pmic_key_setup(keys, &keys->keys[index]);
+		if (error)
+			return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"register input device failed (%d)\n", error);
+		return error;
+	}
+
+	mtk_pmic_keys_lp_reset_setup(keys, mtk_pmic_regs->pmic_rst_reg);
+
+	platform_set_drvdata(pdev, keys);
+
+	return 0;
+}
+
+static struct platform_driver pmic_keys_pdrv = {
+	.probe = mtk_pmic_keys_probe,
+	.driver = {
+		   .name = "mtk-pmic-keys",
+		   .of_match_table = of_mtk_pmic_keys_match_tbl,
+		   .pm = &mtk_pmic_keys_pm_ops,
+	},
+};
+
+module_platform_driver(pmic_keys_pdrv);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Chen Zhong <chen.zhong-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("MTK pmic-keys driver v0.1");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 5/5] mfd: mt6397: Add PMIC keys support to MT6397 driver

[Chen Zhong]

This patch adds compatible strings and interrupts for pmic keys
which serves as child device of MFD.

Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chen Zhong <chen.zhong@mediatek.com>
---
 drivers/mfd/mt6397-core.c |   22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 6546d7f..77b64bd 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -43,6 +43,16 @@
 	},
 };
 
+static const struct resource mt6323_keys_resources[] = {
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_PWRKEY),
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_FCHRKEY),
+};
+
+static const struct resource mt6397_keys_resources[] = {
+	DEFINE_RES_IRQ(MT6397_IRQ_PWRKEY),
+	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
+};
+
 static const struct mfd_cell mt6323_devs[] = {
 	{
 		.name = "mt6323-regulator",
@@ -50,6 +60,11 @@
 	}, {
 		.name = "mt6323-led",
 		.of_compatible = "mediatek,mt6323-led"
+	}, {
+		.name = "mtk-pmic-keys",
+		.num_resources = ARRAY_SIZE(mt6323_keys_resources),
+		.resources = mt6323_keys_resources,
+		.of_compatible = "mediatek,mt6323-keys"
 	},
 };
 
@@ -71,7 +86,12 @@
 	}, {
 		.name = "mt6397-pinctrl",
 		.of_compatible = "mediatek,mt6397-pinctrl",
-	},
+	}, {
+		.name = "mtk-pmic-keys",
+		.num_resources = ARRAY_SIZE(mt6397_keys_resources),
+		.resources = mt6397_keys_resources,
+		.of_compatible = "mediatek,mt6397-keys"
+	}
 };
 
 static void mt6397_irq_lock(struct irq_data *data)
-- 
1.7.9.5