From: Roderick Colenbrander <roderick@gaikai.com>
To: linux-input@vger.kernel.org
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Jiri Kosina <jikos@kernel.org>,
Roderick Colenbrander <roderick.colenbrander@sony.com>
Subject: [PATCH] HID: sony: Report DS4 version info through sysfs
Date: Tue, 19 Dec 2017 11:04:43 -0800 [thread overview]
Message-ID: <20171219190443.52950-1-roderick@gaikai.com> (raw)
From: Roderick Colenbrander <roderick.colenbrander@sony.com>
Report DS4 firmware and hardware version through sysfs for both
USB and Bluetooth. This information is important for userspace
in particular for device specific quirks (e.g. in Bluetooth stacks).
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
---
drivers/hid/hid-sony.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index b9dc3ac4d4aa..432d9a47cab0 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -473,6 +473,7 @@ struct motion_output_report_02 {
#define DS4_FEATURE_REPORT_0x02_SIZE 37
#define DS4_FEATURE_REPORT_0x05_SIZE 41
#define DS4_FEATURE_REPORT_0x81_SIZE 7
+#define DS4_FEATURE_REPORT_0xA3_SIZE 49
#define DS4_INPUT_REPORT_0x11_SIZE 78
#define DS4_OUTPUT_REPORT_0x05_SIZE 32
#define DS4_OUTPUT_REPORT_0x11_SIZE 78
@@ -544,6 +545,8 @@ struct sony_sc {
struct power_supply *battery;
struct power_supply_desc battery_desc;
int device_id;
+ unsigned fw_version;
+ unsigned hw_version;
u8 *output_report_dmabuf;
#ifdef CONFIG_SONY_FF
@@ -627,6 +630,29 @@ static ssize_t ds4_store_poll_interval(struct device *dev,
static DEVICE_ATTR(bt_poll_interval, 0644, ds4_show_poll_interval,
ds4_store_poll_interval);
+static ssize_t sony_show_firmware_version(struct device *dev,
+ struct device_attribute
+ *attr, char *buf)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", sc->fw_version);
+}
+
+static DEVICE_ATTR(firmware_version, 0444, sony_show_firmware_version, NULL);
+
+static ssize_t sony_show_hardware_version(struct device *dev,
+ struct device_attribute
+ *attr, char *buf)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", sc->hw_version);
+}
+
+static DEVICE_ATTR(hardware_version, 0444, sony_show_hardware_version, NULL);
static u8 *motion_fixup(struct hid_device *hdev, u8 *rdesc,
unsigned int *rsize)
@@ -1646,6 +1672,31 @@ static void dualshock4_calibration_work(struct work_struct *work)
spin_unlock_irqrestore(&sc->lock, flags);
}
+static int dualshock4_get_version_info(struct sony_sc *sc)
+{
+ u8 *buf;
+ int ret;
+
+ buf = kmalloc(DS4_FEATURE_REPORT_0xA3_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = hid_hw_raw_request(sc->hdev, 0xA3, buf,
+ DS4_FEATURE_REPORT_0xA3_SIZE,
+ HID_FEATURE_REPORT,
+ HID_REQ_GET_REPORT);
+ if (ret < 0) {
+ kfree(buf);
+ return ret;
+ }
+
+ sc->hw_version = get_unaligned_le16(&buf[35]);
+ sc->fw_version = get_unaligned_le16(&buf[41]);
+
+ kfree(buf);
+ return 0;
+}
+
static void sixaxis_set_leds_from_id(struct sony_sc *sc)
{
static const u8 sixaxis_leds[10][4] = {
@@ -2619,6 +2670,28 @@ static int sony_input_configured(struct hid_device *hdev,
goto err_stop;
}
+ ret = dualshock4_get_version_info(sc);
+ if (ret < 0) {
+ hid_err(sc->hdev, "Failed to get version data from Dualshock 4\n");
+ goto err_stop;
+ }
+
+ ret = device_create_file(&sc->hdev->dev, &dev_attr_firmware_version);
+ if (ret) {
+ /* Make zero for cleanup reasons of sysfs entries. */
+ sc->fw_version = 0;
+ sc->hw_version = 0;
+ hid_err(sc->hdev, "can't create sysfs firmware_version attribute err: %d\n", ret);
+ goto err_stop;
+ }
+
+ ret = device_create_file(&sc->hdev->dev, &dev_attr_hardware_version);
+ if (ret) {
+ sc->hw_version = 0;
+ hid_err(sc->hdev, "can't create sysfs hardware_version attribute err: %d\n", ret);
+ goto err_stop;
+ }
+
/*
* The Dualshock 4 touchpad supports 2 touches and has a
* resolution of 1920x942 (44.86 dots/mm).
@@ -2695,6 +2768,10 @@ static int sony_input_configured(struct hid_device *hdev,
*/
if (sc->ds4_bt_poll_interval)
device_remove_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
+ if (sc->fw_version)
+ device_remove_file(&sc->hdev->dev, &dev_attr_firmware_version);
+ if (sc->hw_version)
+ device_remove_file(&sc->hdev->dev, &dev_attr_hardware_version);
if (sc->quirks & SONY_LED_SUPPORT)
sony_leds_remove(sc);
if (sc->quirks & SONY_BATTERY_SUPPORT)
@@ -2796,6 +2873,12 @@ static void sony_remove(struct hid_device *hdev)
if (sc->quirks & DUALSHOCK4_CONTROLLER_BT)
device_remove_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
+ if (sc->fw_version)
+ device_remove_file(&sc->hdev->dev, &dev_attr_firmware_version);
+
+ if (sc->hw_version)
+ device_remove_file(&sc->hdev->dev, &dev_attr_hardware_version);
+
sony_cancel_work_sync(sc);
kfree(sc->output_report_dmabuf);
--
2.13.6
next reply other threads:[~2017-12-19 19:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 19:04 Roderick Colenbrander [this message]
2018-01-19 22:20 ` [PATCH] HID: sony: Report DS4 version info through sysfs Colenbrander, Roelof
2018-01-23 14:39 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219190443.52950-1-roderick@gaikai.com \
--to=roderick@gaikai.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=roderick.colenbrander@sony.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox