Re: [PATCH] Input: cyapa - remove duplicated macro definitions

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

On Mon, Jan 08, 2018 at 10:54:02PM +0100, Rasmus Villemoes wrote:
> Apart from whitespace differences, this block of macros is repeated
> twice:
> 
> $ x=./drivers/input/mouse/cyapa_gen3.c; diff -w -u <(sed -n '139,181p' $x) <(sed -n '182,224p' $x)
> $
> 
> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>

Applied, thank you.

> ---
>  drivers/input/mouse/cyapa_gen3.c | 43 ----------------------------------------
>  1 file changed, 43 deletions(-)
> 
> diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
> index 1cbfa4a6e830..076dda4a66da 100644
> --- a/drivers/input/mouse/cyapa_gen3.c
> +++ b/drivers/input/mouse/cyapa_gen3.c
> @@ -136,49 +136,6 @@ static const u8 bl_exit[] = { 0x00, 0xff, 0xa5, 0x00, 0x01, 0x02, 0x03, 0x04,
>  		0x05, 0x06, 0x07 };
>  
>  
> - /* for byte read/write command */
> -#define CMD_RESET      0
> -#define CMD_POWER_MODE 1
> -#define CMD_DEV_STATUS 2
> -#define CMD_REPORT_MAX_BASELINE 3
> -#define CMD_REPORT_MIN_BASELINE 4
> -#define SMBUS_BYTE_CMD(cmd) (((cmd) & 0x3f) << 1)
> -#define CYAPA_SMBUS_RESET         SMBUS_BYTE_CMD(CMD_RESET)
> -#define CYAPA_SMBUS_POWER_MODE    SMBUS_BYTE_CMD(CMD_POWER_MODE)
> -#define CYAPA_SMBUS_DEV_STATUS    SMBUS_BYTE_CMD(CMD_DEV_STATUS)
> -#define CYAPA_SMBUS_MAX_BASELINE  SMBUS_BYTE_CMD(CMD_REPORT_MAX_BASELINE)
> -#define CYAPA_SMBUS_MIN_BASELINE  SMBUS_BYTE_CMD(CMD_REPORT_MIN_BASELINE)
> -
> - /* for group registers read/write command */
> -#define REG_GROUP_DATA 0
> -#define REG_GROUP_CMD 2
> -#define REG_GROUP_QUERY 3
> -#define SMBUS_GROUP_CMD(grp) (0x80 | (((grp) & 0x07) << 3))
> -#define CYAPA_SMBUS_GROUP_DATA	 SMBUS_GROUP_CMD(REG_GROUP_DATA)
> -#define CYAPA_SMBUS_GROUP_CMD	 SMBUS_GROUP_CMD(REG_GROUP_CMD)
> -#define CYAPA_SMBUS_GROUP_QUERY	 SMBUS_GROUP_CMD(REG_GROUP_QUERY)
> -
> - /* for register block read/write command */
> -#define CMD_BL_STATUS 0
> -#define CMD_BL_HEAD 1
> -#define CMD_BL_CMD 2
> -#define CMD_BL_DATA 3
> -#define CMD_BL_ALL 4
> -#define CMD_BLK_PRODUCT_ID 5
> -#define CMD_BLK_HEAD 6
> -#define SMBUS_BLOCK_CMD(cmd) (0xc0 | (((cmd) & 0x1f) << 1))
> -
> -/* register block read/write command in bootloader mode */
> -#define CYAPA_SMBUS_BL_STATUS  SMBUS_BLOCK_CMD(CMD_BL_STATUS)
> -#define CYAPA_SMBUS_BL_HEAD    SMBUS_BLOCK_CMD(CMD_BL_HEAD)
> -#define CYAPA_SMBUS_BL_CMD     SMBUS_BLOCK_CMD(CMD_BL_CMD)
> -#define CYAPA_SMBUS_BL_DATA    SMBUS_BLOCK_CMD(CMD_BL_DATA)
> -#define CYAPA_SMBUS_BL_ALL     SMBUS_BLOCK_CMD(CMD_BL_ALL)
> -
> -/* register block read/write command in operational mode */
> -#define CYAPA_SMBUS_BLK_PRODUCT_ID SMBUS_BLOCK_CMD(CMD_BLK_PRODUCT_ID)
> -#define CYAPA_SMBUS_BLK_HEAD SMBUS_BLOCK_CMD(CMD_BLK_HEAD)
> -
>   /* for byte read/write command */
>  #define CMD_RESET 0
>  #define CMD_POWER_MODE 1
> -- 
> 2.15.1
> 

-- 
Dmitry