From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Torokhov Subject: Re: [PATCH] Input: synaptics - reset the ABS_X/Y fuzz after initializing MT axes Date: Tue, 16 Jan 2018 15:41:26 -0800 Message-ID: <20180116234126.4qxrvfyacy2grw37@dtor-ws> References: <20180116053459.GA14660@jelly> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mail-pl0-f66.google.com ([209.85.160.66]:33443 "EHLO mail-pl0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750772AbeAPXla (ORCPT ); Tue, 16 Jan 2018 18:41:30 -0500 Received: by mail-pl0-f66.google.com with SMTP id t4so4577655plo.0 for ; Tue, 16 Jan 2018 15:41:30 -0800 (PST) Content-Disposition: inline In-Reply-To: <20180116053459.GA14660@jelly> Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: Peter Hutterer Cc: linux-input@vger.kernel.org, Benjamin Tissoires , Andrew Duggan On Tue, Jan 16, 2018 at 03:34:59PM +1000, Peter Hutterer wrote: > input_mt_init_slots() resets the ABS_X/Y fuzz to 0 and expects the driver to > call input_mt_report_pointer_emulation(). That is based on the MT position > bits which are already defuzzed - hence a fuzz of 0. > > In the case of synaptics semi-mt devices, we report the ABS_X/Y axes manually. > This results in the MT position being defuzzed but the single-touch emulation > missing that defuzzing. > > Work around this by re-initializing the ABS_X/Y axes after the MT axis to > get the same fuzz value back. > > https://bugs.freedesktop.org/show_bug.cgi?id=104533 > > Signed-off-by: Peter Hutterer Applied, thank you. > --- > Semi-mt devices are Dodos, so I'd rather go for the easy fix here than a > big rewrite of that code. > > drivers/input/mouse/synaptics.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c > index ee5466a374bf..0e04275e0d74 100644 > --- a/drivers/input/mouse/synaptics.c > +++ b/drivers/input/mouse/synaptics.c > @@ -1280,6 +1280,14 @@ static void set_input_params(struct psmouse *psmouse, > INPUT_MT_POINTER | > (cr48_profile_sensor ? > INPUT_MT_TRACK : INPUT_MT_SEMI_MT)); > + > + /* For semi-mt devices we send ABS_X/Y ourselves instead of > + * input_mt_report_pointer_emulation. But > + * input_mt_init_slots() resets the fuzz to 0, leading to a > + * filtered ABS_MT_POSITION_X but an unfiltered ABS_X > + * position. Let's re-initialize ABS_X/Y here. */ > + if (!cr48_profile_sensor) > + set_abs_position_params(dev, &priv->info, ABS_X, ABS_Y); > } > > if (SYN_CAP_PALMDETECT(info->capabilities)) > -- > 2.14.3 > -- Dmitry