Re: [PATCH v2] Input: stmpe-keypad - remove VLA usage

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

On Fri, Mar 09, 2018 at 09:36:12PM -0600, Gustavo A. R. Silva wrote:
> In preparation to enabling -Wvla, remove VLA and replace it
> with a fixed-length array instead.
> 
> Fixed as part of the directive to remove all VLAs from
> the kernel: https://lkml.org/lkml/2018/3/7/621
> 
> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

Applied, thank you.

> ---
> Changes in v2:
>  - Update the code based on Dmitry Torokhov comments. Thanks Dmitry.
> 
>  drivers/input/keyboard/stmpe-keypad.c | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
> index 8c6c0b9..d69e631 100644
> --- a/drivers/input/keyboard/stmpe-keypad.c
> +++ b/drivers/input/keyboard/stmpe-keypad.c
> @@ -48,6 +48,14 @@
>  #define STMPE_KEYPAD_KEYMAP_MAX_SIZE \
>  	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
>  
> +
> +#define STMPE1601_NUM_DATA	5
> +#define STMPE2401_NUM_DATA	3
> +#define STMPE2403_NUM_DATA	5
> +
> +/* Make sure it covers all cases above */
> +#define MAX_NUM_DATA		5
> +
>  /**
>   * struct stmpe_keypad_variant - model-specific attributes
>   * @auto_increment: whether the KPC_DATA_BYTE register address
> @@ -74,7 +82,7 @@ struct stmpe_keypad_variant {
>  static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
>  	[STMPE1601] = {
>  		.auto_increment		= true,
> -		.num_data		= 5,
> +		.num_data		= STMPE1601_NUM_DATA,
>  		.num_normal_data	= 3,
>  		.max_cols		= 8,
>  		.max_rows		= 8,
> @@ -84,7 +92,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
>  	[STMPE2401] = {
>  		.auto_increment		= false,
>  		.set_pullup		= true,
> -		.num_data		= 3,
> +		.num_data		= STMPE2401_NUM_DATA,
>  		.num_normal_data	= 2,
>  		.max_cols		= 8,
>  		.max_rows		= 12,
> @@ -94,7 +102,7 @@ static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
>  	[STMPE2403] = {
>  		.auto_increment		= true,
>  		.set_pullup		= true,
> -		.num_data		= 5,
> +		.num_data		= STMPE2403_NUM_DATA,
>  		.num_normal_data	= 3,
>  		.max_cols		= 8,
>  		.max_rows		= 12,
> @@ -156,7 +164,7 @@ static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
>  	struct stmpe_keypad *keypad = dev;
>  	struct input_dev *input = keypad->input;
>  	const struct stmpe_keypad_variant *variant = keypad->variant;
> -	u8 fifo[variant->num_data];
> +	u8 fifo[MAX_NUM_DATA];
>  	int ret;
>  	int i;
>  
> -- 
> 2.7.4
> 

-- 
Dmitry