linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Vignesh R <vigneshr@ti.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>
Subject: Re: [PATCH v3 2/3] Input: ti_am335x_tsc - Ack pending IRQs at probe and before suspend
Date: Wed, 30 May 2018 14:44:30 -0700	[thread overview]
Message-ID: <20180530214430.GB203327@dtor-ws> (raw)
In-Reply-To: <20180424062741.7891-3-vigneshr@ti.com>

On Tue, Apr 24, 2018 at 11:57:40AM +0530, Vignesh R wrote:
> From: Grygorii Strashko <grygorii.strashko@ti.com>
> 
> It is seen that just enabling the TSC module triggers a HW_PEN IRQ
> without any interaction with touchscreen by user. This results in first
> suspend/resume sequence to fail as system immediately wakes up from
> suspend as soon as HW_PEN IRQ is enabled in suspend handler due to the
> pending IRQ. Therefore clear all IRQs at probe and also in suspend
> callback for sanity.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Signed-off-by: Vignesh R <vigneshr@ti.com>

Applied, thank you.

> ---
> 
> v3: Clear IRQs related to TSC module only
> 
>  drivers/input/touchscreen/ti_am335x_tsc.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
> index 3908c21862c7..a548b0dbe320 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -35,6 +35,8 @@
>  #define SEQ_SETTLE		275
>  #define MAX_12BIT		((1 << 12) - 1)
>  
> +#define TSC_IRQENB_MASK		(IRQENB_FIFO0THRES | IRQENB_EOS | IRQENB_HW_PEN)
> +
>  static const int config_pins[] = {
>  	STEPCONFIG_XPP,
>  	STEPCONFIG_XNN,
> @@ -437,6 +439,7 @@ static int titsc_probe(struct platform_device *pdev)
>  	if (err)
>  		dev_err(&pdev->dev, "irq wake enable failed.\n");
>  
> +	titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
>  	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
>  	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
>  	err = titsc_config_wires(ts_dev);
> @@ -502,6 +505,7 @@ static int __maybe_unused titsc_suspend(struct device *dev)
>  
>  	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
>  	if (device_may_wakeup(tscadc_dev->dev)) {
> +		titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
>  		idle = titsc_readl(ts_dev, REG_IRQENABLE);
>  		titsc_writel(ts_dev, REG_IRQENABLE,
>  				(idle | IRQENB_HW_PEN));
> -- 
> 2.17.0
> 

-- 
Dmitry

  reply	other threads:[~2018-05-30 21:44 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-24  6:27 [PATCH v3 0/3] ti_am335x_tsc: Fix suspend/resume Vignesh R
2018-04-24  6:27 ` [PATCH v3 1/3] Input: ti_am335x_tsc - Mark IRQ as wakeup capable Vignesh R
2018-05-30 21:47   ` Dmitry Torokhov
2018-04-24  6:27 ` [PATCH v3 2/3] Input: ti_am335x_tsc - Ack pending IRQs at probe and before suspend Vignesh R
2018-05-30 21:44   ` Dmitry Torokhov [this message]
2018-04-24  6:27 ` [PATCH v3 3/3] Input: ti_am335x_tsc - Prevent system suspend when TSC is in use Vignesh R
2018-05-30 21:44   ` Dmitry Torokhov
2018-05-14 15:04 ` [PATCH v3 0/3] ti_am335x_tsc: Fix suspend/resume Vignesh R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180530214430.GB203327@dtor-ws \
    --to=dmitry.torokhov@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).