From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Alexey Khoroshilov <khoroshilov@ispras.ru>
Subject: [PATCH 2/5] Input: pxrc - fix freeing URB on device teardown
Date: Tue, 24 Jul 2018 02:35:17 +0000 [thread overview]
Message-ID: <20180724023520.2189-2-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20180724023520.2189-1-dmitry.torokhov@gmail.com>
URB is the only resource that is not managed, and thus is destroyed too early,
before we unregister input device and stop URB in pxrc_close(). To fix it let's
install custom devm handler to free the URB at the right time in devm unwind
sequence.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/joystick/pxrc.c | 66 ++++++++++++++++++++-----------------------
1 file changed, 30 insertions(+), 36 deletions(-)
diff --git a/drivers/input/joystick/pxrc.c b/drivers/input/joystick/pxrc.c
index 000b9b7da744..1560f0e39c34 100644
--- a/drivers/input/joystick/pxrc.c
+++ b/drivers/input/joystick/pxrc.c
@@ -119,49 +119,52 @@ static void pxrc_close(struct input_dev *input)
mutex_unlock(&pxrc->pm_mutex);
}
+static void pxrc_free_urb(void *_pxrc)
+{
+ struct pxrc *pxrc = _pxrc;
+
+ usb_free_urb(pxrc->urb);
+}
+
static int pxrc_usb_init(struct pxrc *pxrc)
{
struct usb_device *udev = interface_to_usbdev(pxrc->intf);
struct usb_endpoint_descriptor *epirq;
unsigned int pipe;
- int retval;
+ int error;
/* Set up the endpoint information */
/* This device only has an interrupt endpoint */
- retval = usb_find_common_endpoints(pxrc->intf->cur_altsetting,
- NULL, NULL, &epirq, NULL);
- if (retval) {
- dev_err(&pxrc->intf->dev,
- "Could not find endpoint\n");
- goto error;
+ error = usb_find_common_endpoints(pxrc->intf->cur_altsetting,
+ NULL, NULL, &epirq, NULL);
+ if (error) {
+ dev_err(&pxrc->intf->dev, "Could not find endpoint\n");
+ return error;
}
pxrc->bsize = usb_endpoint_maxp(epirq);
pxrc->epaddr = epirq->bEndpointAddress;
pxrc->data = devm_kmalloc(&pxrc->intf->dev, pxrc->bsize, GFP_KERNEL);
- if (!pxrc->data) {
- retval = -ENOMEM;
- goto error;
- }
+ if (!pxrc->data)
+ return -ENOMEM;
usb_set_intfdata(pxrc->intf, pxrc);
usb_make_path(udev, pxrc->phys, sizeof(pxrc->phys));
strlcat(pxrc->phys, "/input0", sizeof(pxrc->phys));
pxrc->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!pxrc->urb) {
- retval = -ENOMEM;
- goto error;
- }
+ if (!pxrc->urb)
+ return -ENOMEM;
+
+ error = devm_add_action_or_reset(&pxrc->intf->dev, pxrc_free_urb, pxrc);
+ if (error)
+ return error;
pipe = usb_rcvintpipe(udev, pxrc->epaddr),
usb_fill_int_urb(pxrc->urb, udev, pipe, pxrc->data, pxrc->bsize,
pxrc_usb_irq, pxrc, 1);
-error:
- return retval;
-
-
+ return 0;
}
static int pxrc_input_init(struct pxrc *pxrc)
@@ -197,7 +200,7 @@ static int pxrc_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct pxrc *pxrc;
- int retval;
+ int error;
pxrc = devm_kzalloc(&intf->dev, sizeof(*pxrc), GFP_KERNEL);
if (!pxrc)
@@ -206,29 +209,20 @@ static int pxrc_probe(struct usb_interface *intf,
mutex_init(&pxrc->pm_mutex);
pxrc->intf = intf;
- retval = pxrc_usb_init(pxrc);
- if (retval)
- goto error;
+ error = pxrc_usb_init(pxrc);
+ if (error)
+ return error;
- retval = pxrc_input_init(pxrc);
- if (retval)
- goto err_free_urb;
+ error = pxrc_input_init(pxrc);
+ if (error)
+ return error;
return 0;
-
-err_free_urb:
- usb_free_urb(pxrc->urb);
-
-error:
- return retval;
}
static void pxrc_disconnect(struct usb_interface *intf)
{
- struct pxrc *pxrc = usb_get_intfdata(intf);
-
- usb_free_urb(pxrc->urb);
- usb_set_intfdata(intf, NULL);
+ /* All driver resources are devm-managed. */
}
static int pxrc_suspend(struct usb_interface *intf, pm_message_t message)
--
2.11.0
next prev parent reply other threads:[~2018-07-24 2:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-24 2:35 [PATCH 1/5] Input: pxrc - do not store USB device in private struct Dmitry Torokhov
2018-07-24 2:35 ` Dmitry Torokhov [this message]
2018-07-24 2:35 ` [PATCH 3/5] Input: pxrc - move module device table closer to where it is used Dmitry Torokhov
2018-07-24 2:35 ` [PATCH 4/5] Input: pxrc - do not store unneeded data in driver structure Dmitry Torokhov
2018-07-24 2:35 ` [PATCH 5/5] Input: pxrc - flatten probe code Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180724023520.2189-2-dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=khoroshilov@ispras.ru \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcus.folkesson@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox