From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org, Axel Haslam <axelhaslam@ti.com>,
Illia Smyrnov <illia.smyrnov@ti.com>,
Marcel Partap <mpartap@gmx.net>,
Merlijn Wajer <merlijn@wizzup.org>,
Michael Scott <hashcode0f@gmail.com>, NeKit <nekit1000@gmail.com>,
Pavel Machek <pavel@ucw.cz>, Sebastian Reichel <sre@kernel.org>
Subject: Re: [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states
Date: Mon, 3 Dec 2018 20:00:01 -0800 [thread overview]
Message-ID: <20181204040001.GA239923@dtor-ws> (raw)
In-Reply-To: <20181203231251.GB39861@atomide.com>
Hi Tony,
On Mon, Dec 03, 2018 at 03:12:51PM -0800, Tony Lindgren wrote:
>
> With PM enabled, I noticed that pressing a key on the droid4 keyboard will
> block deeper idle states for the SoC. Looks like we can fix this by
> managing the idle register to gether with the interrupt similar to what
> we already do for the GPIO controller.
Can you show me where exactly we are doing this? I can't seem to find
the matching code.
Thanks!
>
> And there's no need to keep enabling and disabling interrupts and
> wake-up events for normal use if we use IRQF_ONESHOT as suggested by
> Dmitry Torokhov <dmitry.torokhov@gmail.com> so let's do that too.
>
> Cc: Axel Haslam <axelhaslam@ti.com>
> Cc: Illia Smyrnov <illia.smyrnov@ti.com>
> Cc: Marcel Partap <mpartap@gmx.net>
> Cc: Merlijn Wajer <merlijn@wizzup.org>
> Cc: Michael Scott <hashcode0f@gmail.com>
> Cc: NeKit <nekit1000@gmail.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Sebastian Reichel <sre@kernel.org>
> Reported-by: Pavel Machek <pavel@ucw.cz>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
> drivers/input/keyboard/omap4-keypad.c | 30 ++++++++++-----------------
> 1 file changed, 11 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
> --- a/drivers/input/keyboard/omap4-keypad.c
> +++ b/drivers/input/keyboard/omap4-keypad.c
> @@ -53,11 +53,12 @@
> /* OMAP4 bit definitions */
> #define OMAP4_DEF_IRQENABLE_EVENTEN BIT(0)
> #define OMAP4_DEF_IRQENABLE_LONGKEY BIT(1)
> -#define OMAP4_DEF_WUP_EVENT_ENA BIT(0)
> -#define OMAP4_DEF_WUP_LONG_KEY_ENA BIT(1)
> #define OMAP4_DEF_CTRL_NOSOFTMODE BIT(1)
> #define OMAP4_DEF_CTRL_PTV_SHIFT 2
>
> +#define OMAP4_KBD_IRQ_MASK (OMAP4_DEF_IRQENABLE_LONGKEY | \
> + OMAP4_DEF_IRQENABLE_EVENTEN)
> +
> /* OMAP4 values */
> #define OMAP4_VAL_IRQDISABLE 0x0
>
> @@ -126,12 +127,8 @@ static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
> {
> struct omap4_keypad *keypad_data = dev_id;
>
> - if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)) {
> - /* Disable interrupts */
> - kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> - OMAP4_VAL_IRQDISABLE);
> + if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS))
> return IRQ_WAKE_THREAD;
> - }
>
> return IRQ_NONE;
> }
> @@ -173,11 +170,6 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
> kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
> - /* enable interrupts */
> - kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> - OMAP4_DEF_IRQENABLE_EVENTEN |
> - OMAP4_DEF_IRQENABLE_LONGKEY);
> -
> return IRQ_HANDLED;
> }
>
> @@ -197,11 +189,10 @@ static int omap4_keypad_open(struct input_dev *input)
> /* clear pending interrupts */
> kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
> - kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> - OMAP4_DEF_IRQENABLE_EVENTEN |
> - OMAP4_DEF_IRQENABLE_LONGKEY);
> - kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
> - OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
> +
> + /* enable interrupts and wake-up events */
> + kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, OMAP4_KBD_IRQ_MASK);
> + kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, OMAP4_KBD_IRQ_MASK);
>
> enable_irq(keypad_data->irq);
>
> @@ -214,9 +205,10 @@ static void omap4_keypad_close(struct input_dev *input)
>
> disable_irq(keypad_data->irq);
>
> - /* Disable interrupts */
> + /* Disable interrupts and wake-up events */
> kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> OMAP4_VAL_IRQDISABLE);
> + kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0);
>
> /* clear pending interrupts */
> kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> @@ -365,7 +357,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
> }
>
> error = request_threaded_irq(keypad_data->irq, omap4_keypad_irq_handler,
> - omap4_keypad_irq_thread_fn, 0,
> + omap4_keypad_irq_thread_fn, IRQF_ONESHOT,
> "omap4-keypad", keypad_data);
> if (error) {
> dev_err(&pdev->dev, "failed to register interrupt\n");
> --
> 2.19.2
--
Dmitry
next prev parent reply other threads:[~2018-12-04 4:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-03 1:29 [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration Tony Lindgren
2018-12-03 1:29 ` [PATCH 2/2] Input: omap-keypad: Fix idle configration to not block SoC idle states Tony Lindgren
2018-12-03 19:23 ` Dmitry Torokhov
2018-12-03 23:12 ` Tony Lindgren
2018-12-04 4:00 ` Dmitry Torokhov [this message]
2018-12-04 19:09 ` Tony Lindgren
2018-12-04 19:15 ` Dmitry Torokhov
2018-12-03 19:25 ` [PATCH 1/2] Input: omap-keypad: Fix keyboard debounce configuration Dmitry Torokhov
2018-12-09 11:56 ` Pavel Machek
2018-12-10 14:32 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181204040001.GA239923@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=axelhaslam@ti.com \
--cc=hashcode0f@gmail.com \
--cc=illia.smyrnov@ti.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=merlijn@wizzup.org \
--cc=mpartap@gmx.net \
--cc=nekit1000@gmail.com \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).