Linux Input/HID development
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	Sasha Levin <sashal@kernel.org>,
	linux-input@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 06/97] HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk
Date: Wed, 26 Dec 2018 17:34:26 -0500	[thread overview]
Message-ID: <20181226223557.149329-6-sashal@kernel.org> (raw)
In-Reply-To: <20181226223557.149329-1-sashal@kernel.org>

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 4050207485e47e00353e87f2fe2166083e282688 ]

The 258a:6a88 keyboard-dock shipped with the Prowise PT301 tablet is
likely another ITE based design. The controller die is directly bonded
to the PCB with a blob of black glue on top so there are no markings and
the 258a vendor-id used is unknown anywhere. But the keyboard has the
exact same hotkeys mapped to Fn+F1 - F10 as the other ITE8595 keyboard
I have *and* it has the same quirky behavior wrt the rfkill hotkey.

Either way as said this keyboard has the same quirk for its rfkill /
airplane mode hotkey as the ITE 8595 chip, it only sends a single release
event when pressed and released, it never sends a press event.

This commit adds the 258a:6a88 USB id to the hid-ite id-table, fixing
the rfkill key not working on this keyboard.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h | 3 +++
 drivers/hid/hid-ite.c | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 46182d4dd1ce..b7870e7e41d4 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -17,6 +17,9 @@
 #ifndef HID_IDS_H_FILE
 #define HID_IDS_H_FILE
 
+#define USB_VENDOR_ID_258A		0x258a
+#define USB_DEVICE_ID_258A_6A88		0x6a88
+
 #define USB_VENDOR_ID_3M		0x0596
 #define USB_DEVICE_ID_3M1968		0x0500
 #define USB_DEVICE_ID_3M2256		0x0502
diff --git a/drivers/hid/hid-ite.c b/drivers/hid/hid-ite.c
index 1882a4ab0f29..98b059d79bc8 100644
--- a/drivers/hid/hid-ite.c
+++ b/drivers/hid/hid-ite.c
@@ -42,6 +42,7 @@ static int ite_event(struct hid_device *hdev, struct hid_field *field,
 
 static const struct hid_device_id ite_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ITE, USB_DEVICE_ID_ITE8595) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_258A, USB_DEVICE_ID_258A_6A88) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, ite_devices);
-- 
2.19.1

       reply	other threads:[~2018-12-26 22:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20181226223557.149329-1-sashal@kernel.org>
2018-12-26 22:34 ` Sasha Levin [this message]
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 11/97] Input: restore EV_ABS ABS_RESERVED Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 24/97] Input: omap-keypad - fix idle configuration to not block SoC idle states Sasha Levin
2018-12-26 22:34 ` [PATCH AUTOSEL 4.19 25/97] Input: synaptics - enable RMI on ThinkPad T560 Sasha Levin
2018-12-26 22:35 ` [PATCH AUTOSEL 4.19 92/97] Input: synaptics - enable SMBus for HP EliteBook 840 G4 Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181226223557.149329-6-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=benjamin.tissoires@redhat.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox