From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Torokhov Subject: Re: [PATCH v3 2/4] Input: goodix - Add AVDD28-supply regulator support Date: Mon, 7 Jan 2019 23:00:09 +0000 Message-ID: <20190107230009.wfzozb6g6ucymngw@penguin> References: <20181215151802.18592-1-jagan@amarulasolutions.com> <20181215151802.18592-3-jagan@amarulasolutions.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20181215151802.18592-3-jagan@amarulasolutions.com> Sender: linux-kernel-owner@vger.kernel.org To: Jagan Teki Cc: Chen-Yu Tsai , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Michael Trimarchi , linux-amarula@amarulasolutions.com List-Id: linux-input@vger.kernel.org Hi Jagan, On Sat, Dec 15, 2018 at 08:48:00PM +0530, Jagan Teki wrote: > Goodix CTP controllers have AVDD28 pin connected to voltage > regulator which may not be turned on by default, like for GT5663. > > Add support for such ctp used boards by adding voltage regulator > handling code to goodix ctp driver. > > Signed-off-by: Jagan Teki > --- > drivers/input/touchscreen/goodix.c | 33 +++++++++++++++++++++++++----- > 1 file changed, 28 insertions(+), 5 deletions(-) > > diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c > index f2d9c2c41885..7371f6946098 100644 > --- a/drivers/input/touchscreen/goodix.c > +++ b/drivers/input/touchscreen/goodix.c > @@ -27,6 +27,7 @@ > #include > #include > #include > +#include > #include > #include > #include > @@ -47,6 +48,7 @@ struct goodix_ts_data { > struct touchscreen_properties prop; > unsigned int max_touch_num; > unsigned int int_trigger_type; > + struct regulator *avdd28; > struct gpio_desc *gpiod_int; > struct gpio_desc *gpiod_rst; > u16 id; > @@ -786,25 +788,41 @@ static int goodix_ts_probe(struct i2c_client *client, > if (error) > return error; > > + ts->avdd28 = devm_regulator_get(&client->dev, "AVDD28"); > + if (IS_ERR(ts->avdd28)) { > + error = PTR_ERR(ts->avdd28); > + if (error != -EPROBE_DEFER) > + dev_err(&client->dev, > + "Failed to get AVDD28 regulator: %d\n", error); > + return error; > + } > + > + /* power the controller */ > + error = regulator_enable(ts->avdd28); > + if (error) { > + dev_err(&client->dev, "Controller fail to enable AVDD28\n"); > + return error; > + } > + > if (ts->gpiod_int && ts->gpiod_rst) { > /* reset the controller */ > error = goodix_reset(ts); > if (error) { > dev_err(&client->dev, "Controller reset failed.\n"); > - return error; > + goto error; > } > } > > error = goodix_i2c_test(client); > if (error) { > dev_err(&client->dev, "I2C communication failure: %d\n", error); > - return error; > + goto error; > } > > error = goodix_read_version(ts); > if (error) { > dev_err(&client->dev, "Read version failed.\n"); > - return error; > + goto error; > } > > ts->chip = goodix_get_chip_data(ts->id); > @@ -823,23 +841,28 @@ static int goodix_ts_probe(struct i2c_client *client, > dev_err(&client->dev, > "Failed to invoke firmware loader: %d\n", > error); > - return error; > + goto error; > } > > return 0; > } else { > error = goodix_configure_dev(ts); > if (error) > - return error; > + goto error; > } > > return 0; > + > +error: > + regulator_disable(ts->avdd28); > + return error; > } > > static int goodix_ts_remove(struct i2c_client *client) > { > struct goodix_ts_data *ts = i2c_get_clientdata(client); > > + regulator_disable(ts->avdd28); This may be disabling the regulator too early. Please use devm_add_action_or_reset() to install a custom devm handler that would disable the regulator in line with the rest of devm unwinding flow. > if (ts->gpiod_int && ts->gpiod_rst) > wait_for_completion(&ts->firmware_loading_complete); > > -- > 2.18.0.321.gffc6fa0e3 > Thanks. -- Dmitry