Re: [RESEND PATCH v2 7/8] Input: sx8654 - use common of_touchscreen functions

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

On Tue, Dec 18, 2018 at 09:39:46AM +0100, Richard Leitner wrote:
> of_touchscreen.c provides a common interface for a axis invertion and
> swapping of touchscreens. Therefore use it in the sx8654 driver.
> 
> Signed-off-by: Richard Leitner <richard.leitner@skidata.com>

Applied, thank you.

> ---
>  drivers/input/touchscreen/sx8654.c | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
> index 4939863efbef..b7b263ed52af 100644
> --- a/drivers/input/touchscreen/sx8654.c
> +++ b/drivers/input/touchscreen/sx8654.c
> @@ -35,6 +35,7 @@
>  #include <linux/irq.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/delay.h>
> +#include <linux/input/touchscreen.h>
>  
>  /* register addresses */
>  #define I2C_REG_TOUCH0			0x00
> @@ -101,6 +102,7 @@ struct sx8654 {
>  
>  	spinlock_t		lock; /* for input reporting from irq/timer */
>  	struct timer_list	timer;
> +	struct touchscreen_properties props;
>  
>  	const struct sx865x_data *data;
>  };
> @@ -178,8 +180,7 @@ static irqreturn_t sx8650_irq(int irq, void *handle)
>  				 chdata);
>  	}
>  
> -	input_report_abs(ts->input, ABS_X, x);
> -	input_report_abs(ts->input, ABS_Y, y);
> +	touchscreen_report_pos(ts->input, &ts->props, x, y, false);
>  	input_report_key(ts->input, BTN_TOUCH, 1);
>  	input_sync(ts->input);
>  	dev_dbg(dev, "point(%4d,%4d)\n", x, y);
> @@ -226,8 +227,8 @@ static irqreturn_t sx8654_irq(int irq, void *handle)
>  		x = ((data[0] & 0xf) << 8) | (data[1]);
>  		y = ((data[2] & 0xf) << 8) | (data[3]);
>  
> -		input_report_abs(sx8654->input, ABS_X, x);
> -		input_report_abs(sx8654->input, ABS_Y, y);
> +		touchscreen_report_pos(sx8654->input, &sx8654->props, x, y,
> +				       false);
>  		input_report_key(sx8654->input, BTN_TOUCH, 1);
>  		input_sync(sx8654->input);
>  
> @@ -377,6 +378,8 @@ static int sx8654_probe(struct i2c_client *client,
>  	input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
>  	input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
>  
> +	touchscreen_parse_properties(input, false, &sx8654->props);
> +
>  	sx8654->client = client;
>  	sx8654->input = input;
>  
> -- 
> 2.11.0
> 

-- 
Dmitry