[PATCH AUTOSEL 4.19 10/44] Input: pwm-vibra - prevent unbalanced regulator

[PATCH AUTOSEL 4.19 10/44] Input: pwm-vibra - prevent unbalanced regulator

[Sasha Levin]

From: Jonathan Bakker <xc-racer2@live.ca>

[ Upstream commit 3ca232df9921f083c3b37ba5fbc76f4d9046268b ]

pwm_vibrator_stop disables the regulator, but it can be called from
multiple places, even when the regulator is already disabled. Fix this
by using regulator_is_enabled check when starting and stopping device.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/misc/pwm-vibra.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
index 55da191ae550..9df87431d7d4 100644
--- a/drivers/input/misc/pwm-vibra.c
+++ b/drivers/input/misc/pwm-vibra.c
@@ -34,6 +34,7 @@ struct pwm_vibrator {
 	struct work_struct play_work;
 	u16 level;
 	u32 direction_duty_cycle;
+	bool vcc_on;
 };
 
 static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
@@ -42,10 +43,13 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 	struct pwm_state state;
 	int err;
 
-	err = regulator_enable(vibrator->vcc);
-	if (err) {
-		dev_err(pdev, "failed to enable regulator: %d", err);
-		return err;
+	if (!vibrator->vcc_on) {
+		err = regulator_enable(vibrator->vcc);
+		if (err) {
+			dev_err(pdev, "failed to enable regulator: %d", err);
+			return err;
+		}
+		vibrator->vcc_on = true;
 	}
 
 	pwm_get_state(vibrator->pwm, &state);
@@ -76,7 +80,10 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 
 static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
 {
-	regulator_disable(vibrator->vcc);
+	if (vibrator->vcc_on) {
+		regulator_disable(vibrator->vcc);
+		vibrator->vcc_on = false;
+	}
 
 	if (vibrator->pwm_dir)
 		pwm_disable(vibrator->pwm_dir);
-- 
2.19.1

[PATCH AUTOSEL 4.19 11/44] Input: pwm-vibra - stop regulator after disabling pwm, not before

[Sasha Levin]

From: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>

[ Upstream commit 94803aef3533676194c772383472636c453e3147 ]

This patch fixes order of disable calls in pwm_vibrator_stop.
Currently when starting device, we first enable vcc regulator and then
setup and enable pwm. When stopping, we should do this in oposite order,
so first disable pwm and then disable regulator.
Previously order was the same as in start.

Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/misc/pwm-vibra.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
index 9df87431d7d4..dbb6d9e1b947 100644
--- a/drivers/input/misc/pwm-vibra.c
+++ b/drivers/input/misc/pwm-vibra.c
@@ -80,14 +80,14 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 
 static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
 {
+	if (vibrator->pwm_dir)
+		pwm_disable(vibrator->pwm_dir);
+	pwm_disable(vibrator->pwm);
+
 	if (vibrator->vcc_on) {
 		regulator_disable(vibrator->vcc);
 		vibrator->vcc_on = false;
 	}
-
-	if (vibrator->pwm_dir)
-		pwm_disable(vibrator->pwm_dir);
-	pwm_disable(vibrator->pwm);
 }
 
 static void pwm_vibrator_play_work(struct work_struct *work)
-- 
2.19.1

[PATCH AUTOSEL 4.19 23/44] Input: cap11xx - switch to using set_brightness_blocking()

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 628442880af8c201d307a45f3862a7a17df8a189 ]

Updating LED state requires access to regmap and therefore we may sleep,
so we could not do that directly form set_brightness() method.
Historically we used private work to adjust the brightness, but with the
introduction of set_brightness_blocking() we no longer need it.

As a bonus, not having our own work item means we do not have
use-after-free issue as we neglected to cancel outstanding work on
driver unbind.

Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/cap11xx.c | 35 ++++++++++----------------------
 1 file changed, 11 insertions(+), 24 deletions(-)

diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 312916f99597..73686c2460ce 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -75,9 +75,7 @@
 struct cap11xx_led {
 	struct cap11xx_priv *priv;
 	struct led_classdev cdev;
-	struct work_struct work;
 	u32 reg;
-	enum led_brightness new_brightness;
 };
 #endif
 
@@ -233,30 +231,21 @@ static void cap11xx_input_close(struct input_dev *idev)
 }
 
 #ifdef CONFIG_LEDS_CLASS
-static void cap11xx_led_work(struct work_struct *work)
+static int cap11xx_led_set(struct led_classdev *cdev,
+			    enum led_brightness value)
 {
-	struct cap11xx_led *led = container_of(work, struct cap11xx_led, work);
+	struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
 	struct cap11xx_priv *priv = led->priv;
-	int value = led->new_brightness;
 
 	/*
-	 * All LEDs share the same duty cycle as this is a HW limitation.
-	 * Brightness levels per LED are either 0 (OFF) and 1 (ON).
+	 * All LEDs share the same duty cycle as this is a HW
+	 * limitation. Brightness levels per LED are either
+	 * 0 (OFF) and 1 (ON).
 	 */
-	regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
-				BIT(led->reg), value ? BIT(led->reg) : 0);
-}
-
-static void cap11xx_led_set(struct led_classdev *cdev,
-			   enum led_brightness value)
-{
-	struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
-
-	if (led->new_brightness == value)
-		return;
-
-	led->new_brightness = value;
-	schedule_work(&led->work);
+	return regmap_update_bits(priv->regmap,
+				  CAP11XX_REG_LED_OUTPUT_CONTROL,
+				  BIT(led->reg),
+				  value ? BIT(led->reg) : 0);
 }
 
 static int cap11xx_init_leds(struct device *dev,
@@ -299,7 +288,7 @@ static int cap11xx_init_leds(struct device *dev,
 		led->cdev.default_trigger =
 			of_get_property(child, "linux,default-trigger", NULL);
 		led->cdev.flags = 0;
-		led->cdev.brightness_set = cap11xx_led_set;
+		led->cdev.brightness_set_blocking = cap11xx_led_set;
 		led->cdev.max_brightness = 1;
 		led->cdev.brightness = LED_OFF;
 
@@ -312,8 +301,6 @@ static int cap11xx_init_leds(struct device *dev,
 		led->reg = reg;
 		led->priv = priv;
 
-		INIT_WORK(&led->work, cap11xx_led_work);
-
 		error = devm_led_classdev_register(dev, &led->cdev);
 		if (error) {
 			of_node_put(child);
-- 
2.19.1

[PATCH AUTOSEL 4.19 24/44] Input: ps2-gpio - flush TX work when closing port

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit 33a841ce5cef4ca6c18ad333248b6d273f54c839 ]

To ensure that TX work is not running after serio port has been torn down,
let's flush it when closing the port.

Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Acked-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/ps2-gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c
index c62cceb97bb1..5e8d8384aa2a 100644
--- a/drivers/input/serio/ps2-gpio.c
+++ b/drivers/input/serio/ps2-gpio.c
@@ -76,6 +76,7 @@ static void ps2_gpio_close(struct serio *serio)
 {
 	struct ps2_gpio_data *drvdata = serio->port_data;
 
+	flush_delayed_work(&drvdata->tx_work);
 	disable_irq(drvdata->irq);
 }
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 25/44] Input: matrix_keypad - use flush_delayed_work()

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit a342083abe576db43594a32d458a61fa81f7cb32 ]

We should be using flush_delayed_work() instead of flush_work() in
matrix_keypad_stop() to ensure that we are not missing work that is
scheduled but not yet put in the workqueue (i.e. its delay timer has not
expired yet).

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/matrix_keypad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 403452ef00e6..3d1cb7bf5e35 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -222,7 +222,7 @@ static void matrix_keypad_stop(struct input_dev *dev)
 	keypad->stopped = true;
 	spin_unlock_irq(&keypad->lock);
 
-	flush_work(&keypad->work.work);
+	flush_delayed_work(&keypad->work);
 	/*
 	 * matrix_keypad_scan() will leave IRQs enabled;
 	 * we should disable them now.
-- 
2.19.1

[PATCH AUTOSEL 4.19 44/44] Input: st-keyscan - fix potential zalloc NULL dereference

[Sasha Levin]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

[ Upstream commit 2439d37e1bf8a34d437573c086572abe0f3f1b15 ]

This patch fixes the following static checker warning:

drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
error: potential zalloc NULL dereference: 'keypad_data->input_dev'

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/st-keyscan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c
index babcfb165e4f..3b85631fde91 100644
--- a/drivers/input/keyboard/st-keyscan.c
+++ b/drivers/input/keyboard/st-keyscan.c
@@ -153,6 +153,8 @@ static int keyscan_probe(struct platform_device *pdev)
 
 	input_dev->id.bustype = BUS_HOST;
 
+	keypad_data->input_dev = input_dev;
+
 	error = keypad_matrix_key_parse_dt(keypad_data);
 	if (error)
 		return error;
@@ -168,8 +170,6 @@ static int keyscan_probe(struct platform_device *pdev)
 
 	input_set_drvdata(input_dev, keypad_data);
 
-	keypad_data->input_dev = input_dev;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(keypad_data->base))
-- 
2.19.1