* [PATCH AUTOSEL 4.9 05/12] Input: cap11xx - switch to using set_brightness_blocking()
[not found] <20190311195912.139410-1-sashal@kernel.org>
@ 2019-03-11 19:59 ` Sasha Levin
2019-03-11 19:59 ` [PATCH AUTOSEL 4.9 06/12] Input: matrix_keypad - use flush_delayed_work() Sasha Levin
2019-03-11 19:59 ` [PATCH AUTOSEL 4.9 12/12] Input: st-keyscan - fix potential zalloc NULL dereference Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2019-03-11 19:59 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Dmitry Torokhov, Sasha Levin, linux-input
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[ Upstream commit 628442880af8c201d307a45f3862a7a17df8a189 ]
Updating LED state requires access to regmap and therefore we may sleep,
so we could not do that directly form set_brightness() method.
Historically we used private work to adjust the brightness, but with the
introduction of set_brightness_blocking() we no longer need it.
As a bonus, not having our own work item means we do not have
use-after-free issue as we neglected to cancel outstanding work on
driver unbind.
Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/keyboard/cap11xx.c | 35 ++++++++++----------------------
1 file changed, 11 insertions(+), 24 deletions(-)
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 4401be225d64..3c53aa5d5c0c 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -75,9 +75,7 @@
struct cap11xx_led {
struct cap11xx_priv *priv;
struct led_classdev cdev;
- struct work_struct work;
u32 reg;
- enum led_brightness new_brightness;
};
#endif
@@ -233,30 +231,21 @@ static void cap11xx_input_close(struct input_dev *idev)
}
#ifdef CONFIG_LEDS_CLASS
-static void cap11xx_led_work(struct work_struct *work)
+static int cap11xx_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
{
- struct cap11xx_led *led = container_of(work, struct cap11xx_led, work);
+ struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
struct cap11xx_priv *priv = led->priv;
- int value = led->new_brightness;
/*
- * All LEDs share the same duty cycle as this is a HW limitation.
- * Brightness levels per LED are either 0 (OFF) and 1 (ON).
+ * All LEDs share the same duty cycle as this is a HW
+ * limitation. Brightness levels per LED are either
+ * 0 (OFF) and 1 (ON).
*/
- regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
- BIT(led->reg), value ? BIT(led->reg) : 0);
-}
-
-static void cap11xx_led_set(struct led_classdev *cdev,
- enum led_brightness value)
-{
- struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
-
- if (led->new_brightness == value)
- return;
-
- led->new_brightness = value;
- schedule_work(&led->work);
+ return regmap_update_bits(priv->regmap,
+ CAP11XX_REG_LED_OUTPUT_CONTROL,
+ BIT(led->reg),
+ value ? BIT(led->reg) : 0);
}
static int cap11xx_init_leds(struct device *dev,
@@ -299,7 +288,7 @@ static int cap11xx_init_leds(struct device *dev,
led->cdev.default_trigger =
of_get_property(child, "linux,default-trigger", NULL);
led->cdev.flags = 0;
- led->cdev.brightness_set = cap11xx_led_set;
+ led->cdev.brightness_set_blocking = cap11xx_led_set;
led->cdev.max_brightness = 1;
led->cdev.brightness = LED_OFF;
@@ -312,8 +301,6 @@ static int cap11xx_init_leds(struct device *dev,
led->reg = reg;
led->priv = priv;
- INIT_WORK(&led->work, cap11xx_led_work);
-
error = devm_led_classdev_register(dev, &led->cdev);
if (error) {
of_node_put(child);
--
2.19.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH AUTOSEL 4.9 12/12] Input: st-keyscan - fix potential zalloc NULL dereference
[not found] <20190311195912.139410-1-sashal@kernel.org>
2019-03-11 19:59 ` [PATCH AUTOSEL 4.9 05/12] Input: cap11xx - switch to using set_brightness_blocking() Sasha Levin
2019-03-11 19:59 ` [PATCH AUTOSEL 4.9 06/12] Input: matrix_keypad - use flush_delayed_work() Sasha Levin
@ 2019-03-11 19:59 ` Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2019-03-11 19:59 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Gabriel Fernandez, Dmitry Torokhov, Sasha Levin, linux-input
From: Gabriel Fernandez <gabriel.fernandez@st.com>
[ Upstream commit 2439d37e1bf8a34d437573c086572abe0f3f1b15 ]
This patch fixes the following static checker warning:
drivers/input/keyboard/st-keyscan.c:156 keyscan_probe()
error: potential zalloc NULL dereference: 'keypad_data->input_dev'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/input/keyboard/st-keyscan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c
index de7be4f03d91..ebf9f643d910 100644
--- a/drivers/input/keyboard/st-keyscan.c
+++ b/drivers/input/keyboard/st-keyscan.c
@@ -153,6 +153,8 @@ static int keyscan_probe(struct platform_device *pdev)
input_dev->id.bustype = BUS_HOST;
+ keypad_data->input_dev = input_dev;
+
error = keypad_matrix_key_parse_dt(keypad_data);
if (error)
return error;
@@ -168,8 +170,6 @@ static int keyscan_probe(struct platform_device *pdev)
input_set_drvdata(input_dev, keypad_data);
- keypad_data->input_dev = input_dev;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
keypad_data->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(keypad_data->base))
--
2.19.1
^ permalink raw reply related [flat|nested] 3+ messages in thread