From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Sang Subject: [PATCH 0/4] da9063: convert to SPDX Date: Mon, 18 Mar 2019 16:57:23 +0100 Message-ID: <20190318155728.28365-1-wsa+renesas@sang-engineering.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org, Lee Jones , Mark Brown , Support Opensource , Wolfram Sang , linux-input@vger.kernel.org, linux-rtc@vger.kernel.org List-Id: linux-input@vger.kernel.org When working with this driver while debugging something else, I noticed a typo in one of the file headers and decided that it could be converted to SPDX while I am at it anyhow. These patches were "tested" on a Renesas Lager board (R-Car H2). No regressions encountered. buildbot was happy, too. The patches are based on v5.1-rc1. I'd think they can be picked up per subsystem but am also fine with everything going via MFD. There is no dependency or merge conflict with my platform_data removal series which I sent a few minutes ago. Looking forward to comments! Wolfram Wolfram Sang (4): mfd: da9063: convert headers to SPDX regulator: da9063: convert header to SPDX input: da9063_onkey: convert header to SPDX rtc: da9063: convert header to SPDX drivers/input/misc/da9063_onkey.c | 11 +---------- drivers/mfd/da9063-core.c | 8 ++------ drivers/mfd/da9063-i2c.c | 9 ++------- drivers/mfd/da9063-irq.c | 9 ++------- drivers/regulator/da9063-regulator.c | 8 +------- drivers/rtc/rtc-da9063.c | 14 +++----------- include/linux/mfd/da9063/core.h | 7 +------ include/linux/mfd/da9063/registers.h | 7 +------ 8 files changed, 13 insertions(+), 60 deletions(-) -- 2.11.0